| Message ID | 20180825085620.10566-1-peda@axentia.se (mailing list archive) |
|---|---|
| Headers | show |
| Series | drm/atmel-hlcdc: bus-width override support | expand |
On Sat, 25 Aug 2018 10:56:16 +0200 Peter Rosin <peda@axentia.se> wrote: > Hi! > > The background for these patches is that our PCB interface between > the SAMA5D3 and the ds90c185 lvds encoder is only using 16 bits, and > this has to be described somewhere, or the atmel-hlcdc driver have no > chance of selecting the correct output mode. Since we have similar > problems with a tda19988 HDMI encoder I added patches to override > the atmel-hlcdc output format via DT properties compatible with the > media video-interface binding and things start to play together. Queued to drm-misc-next. Thanks, Boris > > Cheers, > Peter > > Changes since v8 https://lkml.org/lkml/2018/8/10/309 > - go back to the solution in v7 (but the ep device_node leak fixed) > for patch 4/4 > - redo (part of) 3/4 w/o using the disliked of_graph_parse_endpoint > > Changes since v7 https://lkml.org/lkml/2018/8/4/288 > - The ep device_node was leaked in v7 patch 3/3, so add patch 3/4 > which simplifies fixing this in patch 4/4 (and adds flexibility) > and adjust patch 4/4 to the changes done in the new 3/4. > - return -ENOMEM on allocation failure in patch 4/4 > > Changes since v6 https://lkml.org/lkml/2018/8/3/333 > - zap bus-type from the binding in patch 2/3 > > Changes since (the shortened) v5 https://lkml.org/lkml/2018/8/3/182 > - add reg properties (and #*-cells) to the example in patch 2/3 > - prohibit bus-width 0 in the device-tree in patch 3/3 > - added reviewed-by from Jacopo to patch 2/3 and 3/3 > > Peter Rosin (4): > dt-bindings: display: bridge: lvds-transmitter: add ti,ds90c185 > dt-bindings: display: atmel: optional video-interface of endpoints > drm/atmel-hlcdc: always iterate over the first 4 output endpoints > drm/atmel-hlcdc: support bus-width (12/16/18/24) in endpoint nodes > > .../devicetree/bindings/display/atmel/hlcdc-dc.txt | 23 ++++++ > .../bindings/display/bridge/lvds-transmitter.txt | 8 +- > drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c | 70 +++++++++++----- > drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h | 1 + > drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_output.c | 92 +++++++++++++++++++--- > 5 files changed, 163 insertions(+), 31 deletions(-) >
On 2018-08-27 21:24, Boris Brezillon wrote: > On Sat, 25 Aug 2018 10:56:16 +0200 > Peter Rosin <peda@axentia.se> wrote: > >> Hi! >> >> The background for these patches is that our PCB interface between >> the SAMA5D3 and the ds90c185 lvds encoder is only using 16 bits, and >> this has to be described somewhere, or the atmel-hlcdc driver have no >> chance of selecting the correct output mode. Since we have similar >> problems with a tda19988 HDMI encoder I added patches to override >> the atmel-hlcdc output format via DT properties compatible with the >> media video-interface binding and things start to play together. > > Queued to drm-misc-next. Thanks! Minute issue, you seem to have some spell-check going on or something, because the subject of patch 1/4 has been "corrected" from "...add ti,ds90c185" to "...add ti, ds90c185" You might want to evaluate if that auto-correction "feature" should be disabled/tweaked/whatever... Cheers, Peter > Thanks, > > Boris > >> >> Cheers, >> Peter >> >> Changes since v8 https://lkml.org/lkml/2018/8/10/309 >> - go back to the solution in v7 (but the ep device_node leak fixed) >> for patch 4/4 >> - redo (part of) 3/4 w/o using the disliked of_graph_parse_endpoint >> >> Changes since v7 https://lkml.org/lkml/2018/8/4/288 >> - The ep device_node was leaked in v7 patch 3/3, so add patch 3/4 >> which simplifies fixing this in patch 4/4 (and adds flexibility) >> and adjust patch 4/4 to the changes done in the new 3/4. >> - return -ENOMEM on allocation failure in patch 4/4 >> >> Changes since v6 https://lkml.org/lkml/2018/8/3/333 >> - zap bus-type from the binding in patch 2/3 >> >> Changes since (the shortened) v5 https://lkml.org/lkml/2018/8/3/182 >> - add reg properties (and #*-cells) to the example in patch 2/3 >> - prohibit bus-width 0 in the device-tree in patch 3/3 >> - added reviewed-by from Jacopo to patch 2/3 and 3/3 >> >> Peter Rosin (4): >> dt-bindings: display: bridge: lvds-transmitter: add ti,ds90c185 >> dt-bindings: display: atmel: optional video-interface of endpoints >> drm/atmel-hlcdc: always iterate over the first 4 output endpoints >> drm/atmel-hlcdc: support bus-width (12/16/18/24) in endpoint nodes >> >> .../devicetree/bindings/display/atmel/hlcdc-dc.txt | 23 ++++++ >> .../bindings/display/bridge/lvds-transmitter.txt | 8 +- >> drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c | 70 +++++++++++----- >> drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h | 1 + >> drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_output.c | 92 +++++++++++++++++++--- >> 5 files changed, 163 insertions(+), 31 deletions(-) >> >
On Mon, 27 Aug 2018 22:31:22 +0200 Peter Rosin <peda@axentia.se> wrote: > On 2018-08-27 21:24, Boris Brezillon wrote: > > On Sat, 25 Aug 2018 10:56:16 +0200 > > Peter Rosin <peda@axentia.se> wrote: > > > >> Hi! > >> > >> The background for these patches is that our PCB interface between > >> the SAMA5D3 and the ds90c185 lvds encoder is only using 16 bits, and > >> this has to be described somewhere, or the atmel-hlcdc driver have no > >> chance of selecting the correct output mode. Since we have similar > >> problems with a tda19988 HDMI encoder I added patches to override > >> the atmel-hlcdc output format via DT properties compatible with the > >> media video-interface binding and things start to play together. > > > > Queued to drm-misc-next. > > Thanks! > > Minute issue, you seem to have some spell-check going on or something, > because the subject of patch 1/4 has been "corrected" from > "...add ti,ds90c185" to "...add ti, ds90c185" > > You might want to evaluate if that auto-correction "feature" should be > disabled/tweaked/whatever... Hm, weird. I just downloaded the mbox from dri-devel's patchwork and passed it to dim apply. dim tends to do a lot of things behind the scene, so maybe it's also trying to fix typos :-).
On Mon, 27 Aug 2018 22:35:05 +0200 Boris Brezillon <boris.brezillon@bootlin.com> wrote: > On Mon, 27 Aug 2018 22:31:22 +0200 > Peter Rosin <peda@axentia.se> wrote: > > > On 2018-08-27 21:24, Boris Brezillon wrote: > > > On Sat, 25 Aug 2018 10:56:16 +0200 > > > Peter Rosin <peda@axentia.se> wrote: > > > > > >> Hi! > > >> > > >> The background for these patches is that our PCB interface between > > >> the SAMA5D3 and the ds90c185 lvds encoder is only using 16 bits, and > > >> this has to be described somewhere, or the atmel-hlcdc driver have no > > >> chance of selecting the correct output mode. Since we have similar > > >> problems with a tda19988 HDMI encoder I added patches to override > > >> the atmel-hlcdc output format via DT properties compatible with the > > >> media video-interface binding and things start to play together. > > > > > > Queued to drm-misc-next. > > > > Thanks! > > > > Minute issue, you seem to have some spell-check going on or something, > > because the subject of patch 1/4 has been "corrected" from > > "...add ti,ds90c185" to "...add ti, ds90c185" > > > > You might want to evaluate if that auto-correction "feature" should be > > disabled/tweaked/whatever... > > Hm, weird. I just downloaded the mbox from dri-devel's patchwork and > passed it to dim apply. dim tends to do a lot of things behind the > scene, so maybe it's also trying to fix typos :-). Nope, looks like it was already wrong on patchwork [1], don't know what happened, because the version I have in my mailbox is correct. [1]https://patchwork.freedesktop.org/patch/246039/
On 2018-08-27 22:40, Boris Brezillon wrote: > On Mon, 27 Aug 2018 22:35:05 +0200 > Boris Brezillon <boris.brezillon@bootlin.com> wrote: > >> On Mon, 27 Aug 2018 22:31:22 +0200 >> Peter Rosin <peda@axentia.se> wrote: >> >>> On 2018-08-27 21:24, Boris Brezillon wrote: >>>> On Sat, 25 Aug 2018 10:56:16 +0200 >>>> Peter Rosin <peda@axentia.se> wrote: >>>> >>>>> Hi! >>>>> >>>>> The background for these patches is that our PCB interface between >>>>> the SAMA5D3 and the ds90c185 lvds encoder is only using 16 bits, and >>>>> this has to be described somewhere, or the atmel-hlcdc driver have no >>>>> chance of selecting the correct output mode. Since we have similar >>>>> problems with a tda19988 HDMI encoder I added patches to override >>>>> the atmel-hlcdc output format via DT properties compatible with the >>>>> media video-interface binding and things start to play together. >>>> >>>> Queued to drm-misc-next. >>> >>> Thanks! >>> >>> Minute issue, you seem to have some spell-check going on or something, >>> because the subject of patch 1/4 has been "corrected" from >>> "...add ti,ds90c185" to "...add ti, ds90c185" >>> >>> You might want to evaluate if that auto-correction "feature" should be >>> disabled/tweaked/whatever... >> >> Hm, weird. I just downloaded the mbox from dri-devel's patchwork and >> passed it to dim apply. dim tends to do a lot of things behind the >> scene, so maybe it's also trying to fix typos :-). > > Nope, looks like it was already wrong on patchwork [1], don't know what > happened, because the version I have in my mailbox is correct. > > [1]https://patchwork.freedesktop.org/patch/246039/ Apparently a known issue: https://github.com/getpatchwork/patchwork/issues/197 Cheers, Peter