diff mbox series

[3/3] arm64: dts: renesas: r8a774a1: Add USB3.0 device nodes

Message ID 1535107429-5458-4-git-send-email-biju.das@bp.renesas.com (mailing list archive)
State New, archived
Headers show
Series Add USB support | expand

Commit Message

Biju Das Aug. 24, 2018, 10:43 a.m. UTC 
Add usb3.0 phy, host and function device nodes on RZ/G2M SoC dtsi.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
---
 arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 35 +++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

Comments

Simon Horman Aug. 28, 2018, 1:42 p.m. UTC | #1 
On Fri, Aug 24, 2018 at 11:43:49AM +0100, Biju Das wrote:
> Add usb3.0 phy, host and function device nodes on RZ/G2M SoC dtsi.
> 
> Signed-off-by: Biju Das <biju.das@bp.renesas.com>
> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>

Thanks,

This looks fine to me but I will wait to see if there are other reviews
before applying.

Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman Aug. 30, 2018, 12:28 p.m. UTC | #2 
On Tue, Aug 28, 2018 at 03:42:05PM +0200, Simon Horman wrote:
> On Fri, Aug 24, 2018 at 11:43:49AM +0100, Biju Das wrote:
> > Add usb3.0 phy, host and function device nodes on RZ/G2M SoC dtsi.
> > 
> > Signed-off-by: Biju Das <biju.das@bp.renesas.com>
> > Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> 
> Thanks,
> 
> This looks fine to me but I will wait to see if there are other reviews
> before applying.

Thanks again, applied for v4.20.
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
index 0c1bae7..d9005cb 100644
--- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
@@ -641,6 +641,19 @@ 
 			dma-channels = <2>;
 		};
 
+		usb3_phy0: usb-phy@e65ee000 {
+			compatible = "renesas,r8a774a1-usb3-phy",
+				     "renesas,rcar-gen3-usb3-phy";
+			reg = <0 0xe65ee000 0 0x90>;
+			clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>,
+				 <&usb_extal_clk>;
+			clock-names = "usb3-if", "usb3s_clk", "usb_extal";
+			power-domains = <&sysc 32>;
+			resets = <&cpg 328>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
 		dmac0: dma-controller@e6700000 {
 			compatible = "renesas,dmac-r8a774a1",
 				     "renesas,rcar-dmac";
@@ -1389,6 +1402,28 @@ 
 			dma-channels = <16>;
 		};
 
+		xhci0: usb@ee000000 {
+			compatible = "renesas,xhci-r8a774a1",
+				     "renesas,rcar-gen3-xhci";
+			reg = <0 0xee000000 0 0xc00>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc 32>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		usb3_peri0: usb@ee020000 {
+			compatible = "renesas,r8a774a1-usb3-peri",
+				     "renesas,rcar-gen3-usb3-peri";
+			reg = <0 0xee020000 0 0x400>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc 32>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
 		ohci0: usb@ee080000 {
 			compatible = "generic-ohci";
 			reg = <0 0xee080000 0 0x100>;