diff mbox series

[v2,1/2] dt-bindings: power: Add Spreadtrum SC2731 charger documentation

Message ID a582871f84c4dd588ae1651d1d9192cc80e2b272.1535964281.git.baolin.wang@linaro.org (mailing list archive)
State Not Applicable, archived
Headers show
Series [v2,1/2] dt-bindings: power: Add Spreadtrum SC2731 charger documentation | expand

Commit Message

(Exiting) Baolin Wang Sept. 3, 2018, 8:55 a.m. UTC 
This patch adds the binding documentation for Spreadtrum SC2731 charger
device.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
---
Changes from v1:
 - Add parent node.
 - Add some battery standard properties.
---
 .../bindings/power/supply/sc2731_charger.txt       |   40 ++++++++++++++++++++
 1 file changed, 40 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power/supply/sc2731_charger.txt

Comments

Krzysztof Kozlowski Sept. 3, 2018, 10:14 a.m. UTC | #1 
On Mon, 3 Sep 2018 at 10:56, Baolin Wang <baolin.wang@linaro.org> wrote:
>
> This patch adds the binding documentation for Spreadtrum SC2731 charger
> device.
>
> Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
> ---
> Changes from v1:
>  - Add parent node.
>  - Add some battery standard properties.
> ---
>  .../bindings/power/supply/sc2731_charger.txt       |   40 ++++++++++++++++++++
>  1 file changed, 40 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/power/supply/sc2731_charger.txt

Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/power/supply/sc2731_charger.txt b/Documentation/devicetree/bindings/power/supply/sc2731_charger.txt
new file mode 100644
index 0000000..5266fab
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/sc2731_charger.txt
@@ -0,0 +1,40 @@ 
+Spreadtrum SC2731 PMIC battery charger binding
+
+Required properties:
+ - compatible: Should be "sprd,sc2731-charger".
+ - reg: Address offset of charger register.
+ - phys: Contains a phandle to the USB phy.
+
+Optional Properties:
+- monitored-battery: phandle of battery characteristics devicetree node.
+  The charger uses the following battery properties:
+- charge-term-current-microamp: current for charge termination phase.
+- constant-charge-voltage-max-microvolt: maximum constant input voltage.
+  See Documentation/devicetree/bindings/power/supply/battery.txt
+
+Example:
+
+	bat: battery {
+		compatible = "simple-battery";
+		charge-term-current-microamp = <120000>;
+		constant-charge-voltage-max-microvolt = <4350000>;
+		......
+	};
+
+	sc2731_pmic: pmic@0 {
+		compatible = "sprd,sc2731";
+		reg = <0>;
+		spi-max-frequency = <26000000>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		charger@0 {
+			compatible = "sprd,sc2731-charger";
+			reg = <0x0>;
+			phys = <&ssphy>;
+			monitored-battery = <&bat>;
+		};
+	};