Message ID | 20180904194903.20712-1-hpoussin@reactos.org (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | [v2] hw/ppc: on 40p machine, change default firmware to OpenBIOS | expand |
On Tue, Sep 04, 2018 at 09:49:03PM +0200, Hervé Poussineau wrote: > OpenBIOS gained 40p support in 5b20e4cacecb62fb2bdc6867c11d44cddd77c4ff > Use it, instead of relying on an unmaintained and very limited firmware. > > Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Uh.. against current ppc-for-3.1, plase. > --- > hw/ppc/prep.c | 2 +- > tests/boot-serial-test.c | 4 ++-- > 2 files changed, 3 insertions(+), 3 deletions(-) > > diff --git a/hw/ppc/prep.c b/hw/ppc/prep.c > index 3401570d98..1558855247 100644 > --- a/hw/ppc/prep.c > +++ b/hw/ppc/prep.c > @@ -736,7 +736,7 @@ static void ibm_40p_init(MachineState *machine) > /* PCI host */ > dev = qdev_create(NULL, "raven-pcihost"); > if (!bios_name) { > - bios_name = BIOS_FILENAME; > + bios_name = "openbios-ppc"; > } > qdev_prop_set_string(dev, "bios-name", bios_name); > qdev_prop_set_uint32(dev, "elf-machine", PPC_ELF_MACHINE); > diff --git a/tests/boot-serial-test.c b/tests/boot-serial-test.c > index 952a2e7ead..276ca14c97 100644 > --- a/tests/boot-serial-test.c > +++ b/tests/boot-serial-test.c > @@ -76,13 +76,13 @@ static testdef_t tests[] = { > { "alpha", "clipper", "", "PCI:" }, > { "ppc", "ppce500", "", "U-Boot" }, > { "ppc", "prep", "-m 96", "Memory size: 96 MB" }, > - { "ppc", "40p", "-boot d", "Booting from device d" }, > + { "ppc", "40p", "-vga none -boot d", "Trying cd:," }, > { "ppc", "g3beige", "", "PowerPC,750" }, > { "ppc", "mac99", "", "PowerPC,G4" }, > { "ppc", "sam460ex", "-m 256", "DRAM: 256 MiB" }, > { "ppc64", "ppce500", "", "U-Boot" }, > { "ppc64", "prep", "-boot e", "Booting from device e" }, > - { "ppc64", "40p", "-m 192", "Memory size: 192 MB" }, > + { "ppc64", "40p", "-m 192", "Memory: 192M" }, > { "ppc64", "mac99", "", "PowerPC,970FX" }, > { "ppc64", "pseries", "", "Open Firmware" }, > { "ppc64", "powernv", "-cpu POWER8", "OPAL" },
On 05/09/18 01:13, David Gibson wrote: > On Tue, Sep 04, 2018 at 09:49:03PM +0200, Hervé Poussineau wrote: >> OpenBIOS gained 40p support in 5b20e4cacecb62fb2bdc6867c11d44cddd77c4ff >> Use it, instead of relying on an unmaintained and very limited firmware. >> >> Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> > > Uh.. against current ppc-for-3.1, plase. I was a bit confused as to why this failed to apply since the original had been part of a local branch for a while, but just noticed it was because of this change to Hervé's original which I had missed: [dwg: Drop prep from boot-serial test to avoid deprecation warnings] Included below is the new diff against ppc-for-3.1: David, is this enough for you to be able to fix up manually without a v3? diff --git a/hw/ppc/prep.c b/hw/ppc/prep.c index 162b27a3b8..baca1d7c04 100644 --- a/hw/ppc/prep.c +++ b/hw/ppc/prep.c @@ -651,7 +651,7 @@ static void ibm_40p_init(MachineState *machine) /* PCI host */ dev = qdev_create(NULL, "raven-pcihost"); if (!bios_name) { - bios_name = BIOS_FILENAME; + bios_name = "openbios-ppc"; } qdev_prop_set_string(dev, "bios-name", bios_name); qdev_prop_set_uint32(dev, "elf-machine", PPC_ELF_MACHINE); diff --git a/tests/boot-serial-test.c b/tests/boot-serial-test.c index f123b15e3e..f865822e32 100644 --- a/tests/boot-serial-test.c +++ b/tests/boot-serial-test.c @@ -75,12 +75,12 @@ typedef struct testdef { static testdef_t tests[] = { { "alpha", "clipper", "", "PCI:" }, { "ppc", "ppce500", "", "U-Boot" }, - { "ppc", "40p", "-boot d", "Booting from device d" }, + { "ppc", "40p", "-vga none -boot d", "Trying cd:," }, { "ppc", "g3beige", "", "PowerPC,750" }, { "ppc", "mac99", "", "PowerPC,G4" }, { "ppc", "sam460ex", "-m 256", "DRAM: 256 MiB" }, { "ppc64", "ppce500", "", "U-Boot" }, - { "ppc64", "40p", "-m 192", "Memory size: 192 MB" }, + { "ppc64", "40p", "-m 192", "Memory: 192M" }, { "ppc64", "mac99", "", "PowerPC,970FX" }, { "ppc64", "pseries", "", "Open Firmware" }, { "ppc64", "powernv", "-cpu POWER8", "OPAL" }, ATB, Mark.
On Thu, Sep 06, 2018 at 05:38:26AM +0100, Mark Cave-Ayland wrote: > On 05/09/18 01:13, David Gibson wrote: > > > On Tue, Sep 04, 2018 at 09:49:03PM +0200, Hervé Poussineau wrote: > >> OpenBIOS gained 40p support in 5b20e4cacecb62fb2bdc6867c11d44cddd77c4ff > >> Use it, instead of relying on an unmaintained and very limited firmware. > >> > >> Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> > > > > Uh.. against current ppc-for-3.1, plase. > > I was a bit confused as to why this failed to apply since the original > had been part of a local branch for a while, but just noticed it was > because of this change to Hervé's original which I had missed: > > [dwg: Drop prep from boot-serial test to avoid deprecation warnings] > > Included below is the new diff against ppc-for-3.1: David, is this > enough for you to be able to fix up manually without a v3? Well, I could have fixed it up manually from v2 - but I'm pushing that busy work back on you as a contributor, because I'm having trouble enough finding dtc maintenance time as it is. > diff --git a/hw/ppc/prep.c b/hw/ppc/prep.c > index 162b27a3b8..baca1d7c04 100644 > --- a/hw/ppc/prep.c > +++ b/hw/ppc/prep.c > @@ -651,7 +651,7 @@ static void ibm_40p_init(MachineState *machine) > /* PCI host */ > dev = qdev_create(NULL, "raven-pcihost"); > if (!bios_name) { > - bios_name = BIOS_FILENAME; > + bios_name = "openbios-ppc"; > } > qdev_prop_set_string(dev, "bios-name", bios_name); > qdev_prop_set_uint32(dev, "elf-machine", PPC_ELF_MACHINE); > diff --git a/tests/boot-serial-test.c b/tests/boot-serial-test.c > index f123b15e3e..f865822e32 100644 > --- a/tests/boot-serial-test.c > +++ b/tests/boot-serial-test.c > @@ -75,12 +75,12 @@ typedef struct testdef { > static testdef_t tests[] = { > { "alpha", "clipper", "", "PCI:" }, > { "ppc", "ppce500", "", "U-Boot" }, > - { "ppc", "40p", "-boot d", "Booting from device d" }, > + { "ppc", "40p", "-vga none -boot d", "Trying cd:," }, > { "ppc", "g3beige", "", "PowerPC,750" }, > { "ppc", "mac99", "", "PowerPC,G4" }, > { "ppc", "sam460ex", "-m 256", "DRAM: 256 MiB" }, > { "ppc64", "ppce500", "", "U-Boot" }, > - { "ppc64", "40p", "-m 192", "Memory size: 192 MB" }, > + { "ppc64", "40p", "-m 192", "Memory: 192M" }, > { "ppc64", "mac99", "", "PowerPC,970FX" }, > { "ppc64", "pseries", "", "Open Firmware" }, > { "ppc64", "powernv", "-cpu POWER8", "OPAL" }, > > > ATB, > > Mark. >
On 07/09/18 02:32, David Gibson wrote: > On Thu, Sep 06, 2018 at 05:38:26AM +0100, Mark Cave-Ayland wrote: >> On 05/09/18 01:13, David Gibson wrote: >> >>> On Tue, Sep 04, 2018 at 09:49:03PM +0200, Hervé Poussineau wrote: >>>> OpenBIOS gained 40p support in 5b20e4cacecb62fb2bdc6867c11d44cddd77c4ff >>>> Use it, instead of relying on an unmaintained and very limited firmware. >>>> >>>> Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> >>> >>> Uh.. against current ppc-for-3.1, plase. >> >> I was a bit confused as to why this failed to apply since the original >> had been part of a local branch for a while, but just noticed it was >> because of this change to Hervé's original which I had missed: >> >> [dwg: Drop prep from boot-serial test to avoid deprecation warnings] >> >> Included below is the new diff against ppc-for-3.1: David, is this >> enough for you to be able to fix up manually without a v3? > > Well, I could have fixed it up manually from v2 - but I'm pushing that > busy work back on you as a contributor, because I'm having trouble > enough finding dtc maintenance time as it is. Fair comment :) Although I do have a few 40p-related patches waiting on this, I'm keen for this particular patch to come from Hervé, since it's quite a big change and I'm not a PReP maintainer. ATB, Mark.
diff --git a/hw/ppc/prep.c b/hw/ppc/prep.c index 3401570d98..1558855247 100644 --- a/hw/ppc/prep.c +++ b/hw/ppc/prep.c @@ -736,7 +736,7 @@ static void ibm_40p_init(MachineState *machine) /* PCI host */ dev = qdev_create(NULL, "raven-pcihost"); if (!bios_name) { - bios_name = BIOS_FILENAME; + bios_name = "openbios-ppc"; } qdev_prop_set_string(dev, "bios-name", bios_name); qdev_prop_set_uint32(dev, "elf-machine", PPC_ELF_MACHINE); diff --git a/tests/boot-serial-test.c b/tests/boot-serial-test.c index 952a2e7ead..276ca14c97 100644 --- a/tests/boot-serial-test.c +++ b/tests/boot-serial-test.c @@ -76,13 +76,13 @@ static testdef_t tests[] = { { "alpha", "clipper", "", "PCI:" }, { "ppc", "ppce500", "", "U-Boot" }, { "ppc", "prep", "-m 96", "Memory size: 96 MB" }, - { "ppc", "40p", "-boot d", "Booting from device d" }, + { "ppc", "40p", "-vga none -boot d", "Trying cd:," }, { "ppc", "g3beige", "", "PowerPC,750" }, { "ppc", "mac99", "", "PowerPC,G4" }, { "ppc", "sam460ex", "-m 256", "DRAM: 256 MiB" }, { "ppc64", "ppce500", "", "U-Boot" }, { "ppc64", "prep", "-boot e", "Booting from device e" }, - { "ppc64", "40p", "-m 192", "Memory size: 192 MB" }, + { "ppc64", "40p", "-m 192", "Memory: 192M" }, { "ppc64", "mac99", "", "PowerPC,970FX" }, { "ppc64", "pseries", "", "Open Firmware" }, { "ppc64", "powernv", "-cpu POWER8", "OPAL" },
OpenBIOS gained 40p support in 5b20e4cacecb62fb2bdc6867c11d44cddd77c4ff Use it, instead of relying on an unmaintained and very limited firmware. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> --- hw/ppc/prep.c | 2 +- tests/boot-serial-test.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-)