diff mbox series

drm/i915/dp: fix shifting by a negative number of bits

Message ID 20180912143153.GA27564@embeddedor.com (mailing list archive)
State New, archived
Headers show
Series drm/i915/dp: fix shifting by a negative number of bits | expand

Commit Message

Gustavo A. R. Silva Sept. 12, 2018, 2:31 p.m. UTC
Function intel_port_to_tc() returns PORT_TC_NONE on error, which is
a negative value -1. In case PORT_TC_NONE is returned, there is an
undefined behavior when shifting by a negative number of bits in
both DP_PHY_MODE_STATUS_NOT_SAFE and P_PHY_MODE_STATUS_COMPLETED
macros.

Fix this by adding sanity checks on intel_port_to_tc return value, before
using macros DP_PHY_MODE_STATUS_NOT_SAFE and P_PHY_MODE_STATUS_COMPLETED.

Addresses-Coverity-ID: 1473324 ("Bad bit shift operation")
Addresses-Coverity-ID: 1473325 ("Bad bit shift operation")
Fixes: 39d1e234e1e1 ("drm/i915/icl: implement the tc/legacy HPD {dis,}connect flows")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
---
 drivers/gpu/drm/i915/intel_dp.c | 9 +++++++++
 1 file changed, 9 insertions(+)

Comments

Zanoni, Paulo R Sept. 12, 2018, 10:02 p.m. UTC | #1
Em Qua, 2018-09-12 às 09:31 -0500, Gustavo A. R. Silva escreveu:
> Function intel_port_to_tc() returns PORT_TC_NONE on error, which is
> a negative value -1. In case PORT_TC_NONE is returned, there is an
> undefined behavior when shifting by a negative number of bits in
> both DP_PHY_MODE_STATUS_NOT_SAFE and P_PHY_MODE_STATUS_COMPLETED
> macros.
> 
> Fix this by adding sanity checks on intel_port_to_tc return value,
> before
> using macros DP_PHY_MODE_STATUS_NOT_SAFE and
> P_PHY_MODE_STATUS_COMPLETED.

This was just discussed yesterday in a patch by Rodrigo:

https://patchwork.freedesktop.org/patch/246903/

I would personally prefer his version because it avoids passing -1 to
register macros that Coverity doesn't seem to care about, it's a single
check and it prints WARN() instead of DRM_DEBUG_KMS().

Although I do prefer your commit message explanation :).

Perhaps I should reconsider my vote to not merge it. Or we could
actually go and test what happens when intel_port_to_tc() is broken,
fixing all the issues instead of just the ones reported by Coverity.

Anyway, Rodrigo's patch with an improved commit message could receive
my R-B tag now.

> 
> Addresses-Coverity-ID: 1473324 ("Bad bit shift operation")
> Addresses-Coverity-ID: 1473325 ("Bad bit shift operation")
> Fixes: 39d1e234e1e1 ("drm/i915/icl: implement the tc/legacy HPD
> {dis,}connect flows")
> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
> ---
>  drivers/gpu/drm/i915/intel_dp.c | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/intel_dp.c
> b/drivers/gpu/drm/i915/intel_dp.c
> index 436c22d..e34b7b1 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -4811,6 +4811,11 @@ static bool icl_tc_phy_connect(struct
> drm_i915_private *dev_priv,
>  	    dig_port->tc_type != TC_PORT_TYPEC)
>  		return true;
>  
> +	if (tc_port < 0) {
> +		DRM_DEBUG_KMS("Bad TC port %d\n", tc_port);
> +		return false;
> +	}
> +
>  	val = I915_READ(PORT_TX_DFLEXDPPMS);
>  	if (!(val & DP_PHY_MODE_STATUS_COMPLETED(tc_port))) {
>  		DRM_DEBUG_KMS("DP PHY for TC port %d not ready\n",
> tc_port);
> @@ -4857,6 +4862,10 @@ static void icl_tc_phy_disconnect(struct
> drm_i915_private *dev_priv,
>  	    dig_port->tc_type != TC_PORT_TYPEC)
>  		return;
>  
> +	if (tc_port < 0) {
> +		DRM_DEBUG_KMS("Bad TC port %d\n", tc_port);
> +		return;
> +	}
>  	/*
>  	 * This function may be called many times in a row without
> an HPD event
>  	 * in between, so try to avoid the write when we can.
diff mbox series

Patch

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 436c22d..e34b7b1 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -4811,6 +4811,11 @@  static bool icl_tc_phy_connect(struct drm_i915_private *dev_priv,
 	    dig_port->tc_type != TC_PORT_TYPEC)
 		return true;
 
+	if (tc_port < 0) {
+		DRM_DEBUG_KMS("Bad TC port %d\n", tc_port);
+		return false;
+	}
+
 	val = I915_READ(PORT_TX_DFLEXDPPMS);
 	if (!(val & DP_PHY_MODE_STATUS_COMPLETED(tc_port))) {
 		DRM_DEBUG_KMS("DP PHY for TC port %d not ready\n", tc_port);
@@ -4857,6 +4862,10 @@  static void icl_tc_phy_disconnect(struct drm_i915_private *dev_priv,
 	    dig_port->tc_type != TC_PORT_TYPEC)
 		return;
 
+	if (tc_port < 0) {
+		DRM_DEBUG_KMS("Bad TC port %d\n", tc_port);
+		return;
+	}
 	/*
 	 * This function may be called many times in a row without an HPD event
 	 * in between, so try to avoid the write when we can.