@@ -710,6 +710,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \
am335x-evmsk.dtb \
am335x-icev2.dtb \
am335x-lxm.dtb \
+ am335x-moxa-uc-2101.dtb \
am335x-moxa-uc-8100-me-t.dtb \
am335x-nano.dtb \
am335x-pdu001.dtb \
new file mode 100644
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 MOXA Inc. - https://www.moxa.com/
+ *
+ * Authors: SZ Lin (林上智) <sz.lin@moxa.com>
+ * Wes Huang (黃淵河) <wes.huang@moxa.com>
+ * Fero JD Zhou (周俊達) <FeroJD.Zhou@moxa.com>
+ */
+
+/dts-v1/;
+
+#include "am335x-moxa-uc-2100-common.dtsi"
+
+/ {
+ model = "Moxa UC-2101";
+ compatible = "moxa,uc-2101", "ti,am33xx";
+
+ leds {
+ compatible = "gpio-leds";
+ led1 {
+ label = "UC2100:GREEN:USER";
+ gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+};
+
+&am33xx_pinmux {
+ pinctrl-names = "default";
+
+ cpsw_default: cpsw_default {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */
+ AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */
+ AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txen.rmii1_txen */
+ AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */
+ AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */
+ AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */
+ AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */
+ AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mii1_refclk.rmii1_refclk */
+ >;
+ };
+
+ spi1_pins: pinmux_spi1 {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x964, PIN_INPUT_PULLUP | MUX_MODE4) /* ecap0_in_pwm0_out.spi1_sclk */
+ AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE4) /* uart1_ctsn.spi1_cs0 */
+ AM33XX_IOPAD(0x968, PIN_INPUT_PULLUP | MUX_MODE4) /* uart0_ctsn.spi1_d0 */
+ AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE4) /* uart0_rtsn.spi1_d1 */
+ >;
+ };
+};
+
+&davinci_mdio {
+ phy0: ethernet-phy@4 {
+ reg = <4>;
+ };
+};
+
+&cpsw_emac0 {
+ status = "okay";
+ phy-handle = <&phy0>;
+ phy-mode = "rmii";
+};
+
+&cpsw_emac1 {
+ status = "disabled";
+};