Message ID | 20180912225719.17574-3-manasi.d.navare@intel.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | [v2,1/4] drm/i915/dp: Link train Fallback on eDP only if fallback link BW can fit panel's native mode | expand |
On Wed, Sep 12, 2018 at 03:57:18PM -0700, Manasi Navare wrote: > With downclock mode and DRRS now operating independently user can > request a modeset on downclock mode. In that case intel_dp_mode_valid() > should validate the downclock mode as well if that is requested. > > Cc: Jani Nikula <jani.nikula@linux.intel.com> > Cc: Ville Syrjala <ville.syrjala@linux.intel.com> > Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> > --- > drivers/gpu/drm/i915/intel_dp.c | 7 ++++++- > 1 file changed, 6 insertions(+), 1 deletion(-) > > diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c > index 30526c02b343..0e400629e85c 100644 > --- a/drivers/gpu/drm/i915/intel_dp.c > +++ b/drivers/gpu/drm/i915/intel_dp.c > @@ -615,6 +615,8 @@ intel_dp_mode_valid(struct drm_connector *connector, > struct intel_dp *intel_dp = intel_attached_dp(connector); > struct intel_connector *intel_connector = to_intel_connector(connector); > struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode; > + struct drm_display_mode *downclock_mode = > + intel_connector->panel.downclock_mode; > int target_clock = mode->clock; > int max_rate, mode_rate, max_lanes, max_link_clock; > int max_dotclk; > @@ -631,7 +633,10 @@ intel_dp_mode_valid(struct drm_connector *connector, > if (mode->vdisplay > fixed_mode->vdisplay) > return MODE_PANEL; > > - target_clock = fixed_mode->clock; > + if (target_clock < fixed_mode->clock && downclock_mode) > + target_clock = downclock_mode->clock; > + else > + target_clock = fixed_mode->clock; The whole mode_valid() thing is a bit of mess for internal displays. I tried to start fixing it here https://patchwork.freedesktop.org/series/45610/ but it got stuck in a bit of a bikeshed. So without going all in and fixing the vrefresh stuff, and probably also digging through the whole rat's nest of drm_mode_equal() clock comparison accuracy (if we want to deal with the whole 59.97 v. 60 hz stuff fully) I think this can be simplified into: intel_edp_min_dotclock() { return downclock_mode ? downclock_mode->clock : fixed_mode->clock; } Anyways, none of that is helpful unless you actually start to use the downlock mode instead of the fixed mode. Which I didn't spot anywhere in this series. > } > > max_link_clock = intel_dp_max_link_rate(intel_dp); > -- > 2.18.0
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 30526c02b343..0e400629e85c 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -615,6 +615,8 @@ intel_dp_mode_valid(struct drm_connector *connector, struct intel_dp *intel_dp = intel_attached_dp(connector); struct intel_connector *intel_connector = to_intel_connector(connector); struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode; + struct drm_display_mode *downclock_mode = + intel_connector->panel.downclock_mode; int target_clock = mode->clock; int max_rate, mode_rate, max_lanes, max_link_clock; int max_dotclk; @@ -631,7 +633,10 @@ intel_dp_mode_valid(struct drm_connector *connector, if (mode->vdisplay > fixed_mode->vdisplay) return MODE_PANEL; - target_clock = fixed_mode->clock; + if (target_clock < fixed_mode->clock && downclock_mode) + target_clock = downclock_mode->clock; + else + target_clock = fixed_mode->clock; } max_link_clock = intel_dp_max_link_rate(intel_dp);
With downclock mode and DRRS now operating independently user can request a modeset on downclock mode. In that case intel_dp_mode_valid() should validate the downclock mode as well if that is requested. Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> --- drivers/gpu/drm/i915/intel_dp.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)