diff mbox series

[RFC,1/4] i2c: core: remove outdated DEBUG output

Message ID 20180920161423.13990-2-wsa+renesas@sang-engineering.com (mailing list archive)
State New, archived
Headers show
Series i2c: core: introduce master_xfer_irqless | expand

Commit Message

Wolfram Sang Sept. 20, 2018, 4:14 p.m. UTC
The usefulness of this debug output is questionable. It covers only
direct i2c_transfer calls and no SMBUS calls, neither direct nor
emulated ones. And the latter one is largely used in the kernel, so a
lot of stuff is missed. Also, we have a proper tracing mechanism for all
these kinds of transfers in place for years now. Remove this old one.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
 drivers/i2c/i2c-core-base.c | 10 ----------
 1 file changed, 10 deletions(-)

Comments

Peter Rosin Sept. 20, 2018, 5:23 p.m. UTC | #1
On 2018-09-20 18:14, Wolfram Sang wrote:
> The usefulness of this debug output is questionable. It covers only
> direct i2c_transfer calls and no SMBUS calls, neither direct nor
> emulated ones. And the latter one is largely used in the kernel, so a
> lot of stuff is missed. Also, we have a proper tracing mechanism for all
> these kinds of transfers in place for years now. Remove this old one.
> 
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

This old one fires before locking and even if locking fails for the
atomic/irq case. You might want to mention that in the commit message?
But I certainly agree with the usefulness statement...

Acked-by: Peter Rosin <peda@axentia.se>

> ---
>  drivers/i2c/i2c-core-base.c | 10 ----------
>  1 file changed, 10 deletions(-)
> 
> diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c
> index 9ee9a15e7134..c2b352c46fae 100644
> --- a/drivers/i2c/i2c-core-base.c
> +++ b/drivers/i2c/i2c-core-base.c
> @@ -1940,16 +1940,6 @@ int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
>  	 */
>  
>  	if (adap->algo->master_xfer) {
> -#ifdef DEBUG
> -		for (ret = 0; ret < num; ret++) {
> -			dev_dbg(&adap->dev,
> -				"master_xfer[%d] %c, addr=0x%02x, len=%d%s\n",
> -				ret, (msgs[ret].flags & I2C_M_RD) ? 'R' : 'W',
> -				msgs[ret].addr, msgs[ret].len,
> -				(msgs[ret].flags & I2C_M_RECV_LEN) ? "+" : "");
> -		}
> -#endif
> -
>  		if (in_atomic() || irqs_disabled()) {
>  			ret = i2c_trylock_bus(adap, I2C_LOCK_SEGMENT);
>  			if (!ret)
>
Wolfram Sang Oct. 5, 2018, 4:14 p.m. UTC | #2
On Thu, Sep 20, 2018 at 06:14:20PM +0200, Wolfram Sang wrote:
> The usefulness of this debug output is questionable. It covers only
> direct i2c_transfer calls and no SMBUS calls, neither direct nor
> emulated ones. And the latter one is largely used in the kernel, so a
> lot of stuff is missed. Also, we have a proper tracing mechanism for all
> these kinds of transfers in place for years now. Remove this old one.
> 
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

I think we can have this clean up already.

Applied to for-next (with updated commit message), thanks!
diff mbox series

Patch

diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c
index 9ee9a15e7134..c2b352c46fae 100644
--- a/drivers/i2c/i2c-core-base.c
+++ b/drivers/i2c/i2c-core-base.c
@@ -1940,16 +1940,6 @@  int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 	 */
 
 	if (adap->algo->master_xfer) {
-#ifdef DEBUG
-		for (ret = 0; ret < num; ret++) {
-			dev_dbg(&adap->dev,
-				"master_xfer[%d] %c, addr=0x%02x, len=%d%s\n",
-				ret, (msgs[ret].flags & I2C_M_RD) ? 'R' : 'W',
-				msgs[ret].addr, msgs[ret].len,
-				(msgs[ret].flags & I2C_M_RECV_LEN) ? "+" : "");
-		}
-#endif
-
 		if (in_atomic() || irqs_disabled()) {
 			ret = i2c_trylock_bus(adap, I2C_LOCK_SEGMENT);
 			if (!ret)