diff mbox series

[v9,1/2] dt-bindings: hwmon: Add ina3221 documentation

Message ID 20181002010523.2019-2-nicoleotsuka@gmail.com (mailing list archive)
State Accepted
Headers show
Series Add an initial DT binding doc for ina3221 | expand

Commit Message

Nicolin Chen Oct. 2, 2018, 1:05 a.m. UTC 
Texas Instruments INA3221 is a triple-channel shunt and bus
voltage monitor. This patch adds a DT binding doc for it.

Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
---
Changelog
v7->v9:
 * N/A
v6->v7:
 * Restored three channel examples and merged them with the parent one
v5->v6:
 * Removed status property as no need to explicitly list it.
 * Combined all examples into a complete one.
v4->v5:
 * Replaced "input-id" with "reg" and added address-cells and size-cells
 * Replaced "input-label" with "label"
 * Replaced "shunt-resistor" with "shunt-resistor-micro-ohms"
v3->v4:
 * Removed the attempt of putting labels in the node names
 * Added a new optional label property in the child node
 * Updated examples accordingly
v2->v3:
 * Added a simple subject in the line 1
 * Fixed the shunt resistor value in the example
v1->v2:
 * Dropped channel name properties
 * Added child node definitions.
 * * Added shunt resistor property in the child node
 * * Added status property to indicate connection status
 * * Changed to use child node name as the label of input source

 .../devicetree/bindings/hwmon/ina3221.txt     | 44 +++++++++++++++++++
 1 file changed, 44 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/hwmon/ina3221.txt

Comments

Guenter Roeck Oct. 2, 2018, 5:05 p.m. UTC | #1 
Hi Nicolin,

On Mon, Oct 01, 2018 at 06:05:22PM -0700, Nicolin Chen wrote:
> Texas Instruments INA3221 is a triple-channel shunt and bus
> voltage monitor. This patch adds a DT binding doc for it.
> 
> Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
> ---

This version of the series looks good to me. I'll add both patches to
hwmon-next, with the understanding that I may pull them if Rob has
bindings related concerns.

Thanks,
Guenter

> Changelog
> v7->v9:
>  * N/A
> v6->v7:
>  * Restored three channel examples and merged them with the parent one
> v5->v6:
>  * Removed status property as no need to explicitly list it.
>  * Combined all examples into a complete one.
> v4->v5:
>  * Replaced "input-id" with "reg" and added address-cells and size-cells
>  * Replaced "input-label" with "label"
>  * Replaced "shunt-resistor" with "shunt-resistor-micro-ohms"
> v3->v4:
>  * Removed the attempt of putting labels in the node names
>  * Added a new optional label property in the child node
>  * Updated examples accordingly
> v2->v3:
>  * Added a simple subject in the line 1
>  * Fixed the shunt resistor value in the example
> v1->v2:
>  * Dropped channel name properties
>  * Added child node definitions.
>  * * Added shunt resistor property in the child node
>  * * Added status property to indicate connection status
>  * * Changed to use child node name as the label of input source
> 
>  .../devicetree/bindings/hwmon/ina3221.txt     | 44 +++++++++++++++++++
>  1 file changed, 44 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/hwmon/ina3221.txt
> 
> diff --git a/Documentation/devicetree/bindings/hwmon/ina3221.txt b/Documentation/devicetree/bindings/hwmon/ina3221.txt
> new file mode 100644
> index 000000000000..a7b25caa2b8e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/ina3221.txt
> @@ -0,0 +1,44 @@
> +Texas Instruments INA3221 Device Tree Bindings
> +
> +1) ina3221 node
> +  Required properties:
> +  - compatible: Must be "ti,ina3221"
> +  - reg: I2C address
> +
> +  Optional properties:
> +  = The node contains optional child nodes for three channels =
> +  = Each child node describes the information of input source =
> +
> +  - #address-cells: Required only if a child node is present. Must be 1.
> +  - #size-cells: Required only if a child node is present. Must be 0.
> +
> +2) child nodes
> +  Required properties:
> +  - reg: Must be 0, 1 or 2, corresponding to IN1, IN2 or IN3 port of INA3221
> +
> +  Optional properties:
> +  - label: Name of the input source
> +  - shunt-resistor-micro-ohms: Shunt resistor value in micro-Ohm
> +
> +Example:
> +
> +ina3221@40 {
> +	compatible = "ti,ina3221";
> +	reg = <0x40>;
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +
> +	input@0 {
> +		reg = <0x0>;
> +		status = "disabled";
> +	};
> +	input@1 {
> +		reg = <0x1>;
> +		shunt-resistor-micro-ohms = <5000>;
> +	};
> +	input@2 {
> +		reg = <0x2>;
> +		label = "VDD_5V";
> +		shunt-resistor-micro-ohms = <5000>;
> +	};
> +};
> -- 
> 2.17.1
>
Nicolin Chen Oct. 2, 2018, 5:07 p.m. UTC | #2 
On Tue, Oct 02, 2018 at 10:05:18AM -0700, Guenter Roeck wrote:
> Hi Nicolin,
> 
> On Mon, Oct 01, 2018 at 06:05:22PM -0700, Nicolin Chen wrote:
> > Texas Instruments INA3221 is a triple-channel shunt and bus
> > voltage monitor. This patch adds a DT binding doc for it.
> > 
> > Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
> > ---
> 
> This version of the series looks good to me. I'll add both patches to
> hwmon-next, with the understanding that I may pull them if Rob has
> bindings related concerns.

Thanks a lot, especially for the review.

Nicolin
Rob Herring Oct. 5, 2018, 8:24 p.m. UTC | #3 
On Mon,  1 Oct 2018 18:05:22 -0700, Nicolin Chen wrote:
> Texas Instruments INA3221 is a triple-channel shunt and bus
> voltage monitor. This patch adds a DT binding doc for it.
> 
> Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
> ---
> Changelog
> v7->v9:
>  * N/A
> v6->v7:
>  * Restored three channel examples and merged them with the parent one
> v5->v6:
>  * Removed status property as no need to explicitly list it.
>  * Combined all examples into a complete one.
> v4->v5:
>  * Replaced "input-id" with "reg" and added address-cells and size-cells
>  * Replaced "input-label" with "label"
>  * Replaced "shunt-resistor" with "shunt-resistor-micro-ohms"
> v3->v4:
>  * Removed the attempt of putting labels in the node names
>  * Added a new optional label property in the child node
>  * Updated examples accordingly
> v2->v3:
>  * Added a simple subject in the line 1
>  * Fixed the shunt resistor value in the example
> v1->v2:
>  * Dropped channel name properties
>  * Added child node definitions.
>  * * Added shunt resistor property in the child node
>  * * Added status property to indicate connection status
>  * * Changed to use child node name as the label of input source
> 
>  .../devicetree/bindings/hwmon/ina3221.txt     | 44 +++++++++++++++++++
>  1 file changed, 44 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/hwmon/ina3221.txt
> 

Reviewed-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/hwmon/ina3221.txt b/Documentation/devicetree/bindings/hwmon/ina3221.txt
new file mode 100644
index 000000000000..a7b25caa2b8e
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ina3221.txt
@@ -0,0 +1,44 @@ 
+Texas Instruments INA3221 Device Tree Bindings
+
+1) ina3221 node
+  Required properties:
+  - compatible: Must be "ti,ina3221"
+  - reg: I2C address
+
+  Optional properties:
+  = The node contains optional child nodes for three channels =
+  = Each child node describes the information of input source =
+
+  - #address-cells: Required only if a child node is present. Must be 1.
+  - #size-cells: Required only if a child node is present. Must be 0.
+
+2) child nodes
+  Required properties:
+  - reg: Must be 0, 1 or 2, corresponding to IN1, IN2 or IN3 port of INA3221
+
+  Optional properties:
+  - label: Name of the input source
+  - shunt-resistor-micro-ohms: Shunt resistor value in micro-Ohm
+
+Example:
+
+ina3221@40 {
+	compatible = "ti,ina3221";
+	reg = <0x40>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	input@0 {
+		reg = <0x0>;
+		status = "disabled";
+	};
+	input@1 {
+		reg = <0x1>;
+		shunt-resistor-micro-ohms = <5000>;
+	};
+	input@2 {
+		reg = <0x2>;
+		label = "VDD_5V";
+		shunt-resistor-micro-ohms = <5000>;
+	};
+};