diff mbox series

staging: bcm2835-camera: remove extraneous setting of dev->colourfx.enable

Message ID 20181008145012.31312-1-colin.king@canonical.com (mailing list archive)
State New, archived
Headers show
Series staging: bcm2835-camera: remove extraneous setting of dev->colourfx.enable | expand

Commit Message

Colin King Oct. 8, 2018, 2:50 p.m. UTC
From: Colin Ian King <colin.king@canonical.com>

Currently dev->colourfx.enable is being set twice, hence the first
occurrance is redundant and can be removed, so remove it. This minor
issue was introduced by commit 7b3ad5abf027 ("staging: Import the
BCM2835 MMAL-based V4L2 camera driver.").

Detected by CoverityScan CID#1419711 ("Unused value")

Signed-off-by: Colin Ian King <colin.king@canonical.com>
---
 drivers/staging/vc04_services/bcm2835-camera/controls.c | 1 -
 1 file changed, 1 deletion(-)

Comments

Stefan Wahren Oct. 8, 2018, 3:48 p.m. UTC | #1
Hi Colin,

Am 08.10.2018 um 16:50 schrieb Colin King:
> From: Colin Ian King <colin.king@canonical.com>
>
> Currently dev->colourfx.enable is being set twice, hence the first
> occurrance is redundant and can be removed, so remove it. This minor
> issue was introduced by commit 7b3ad5abf027 ("staging: Import the
> BCM2835 MMAL-based V4L2 camera driver.").
>
> Detected by CoverityScan CID#1419711 ("Unused value")
>
> Signed-off-by: Colin Ian King <colin.king@canonical.com>
> ---
>  drivers/staging/vc04_services/bcm2835-camera/controls.c | 1 -
>  1 file changed, 1 deletion(-)
>
> diff --git a/drivers/staging/vc04_services/bcm2835-camera/controls.c b/drivers/staging/vc04_services/bcm2835-camera/controls.c
> index a2c55cb2192a..99831dd4365d 100644
> --- a/drivers/staging/vc04_services/bcm2835-camera/controls.c
> +++ b/drivers/staging/vc04_services/bcm2835-camera/controls.c
> @@ -588,7 +588,6 @@ static int ctrl_set_colfx(struct bm2835_mmal_dev *dev,
>  
>  	control = &dev->component[MMAL_COMPONENT_CAMERA]->control;
>  
> -	dev->colourfx.enable = (ctrl->val & 0xff00) >> 8;
>  	dev->colourfx.enable = ctrl->val & 0xff;
>  
>  	ret = vchiq_mmal_port_parameter_set(dev->instance, control,

as long as the current behavior is correct, i'm okay with this patch.
But the byte masking looks suspicious, so i hope Dave can clarify that.

Thanks Stefan
Dave Stevenson Oct. 8, 2018, 4:51 p.m. UTC | #2
Hi Stefan.

Thanks for forwarding as the linux-rpi-kernel list hasn't sent it to me as yet.

On Mon, 8 Oct 2018 at 16:48, Stefan Wahren <stefan.wahren@i2se.com> wrote:
>
> Hi Colin,
>
> Am 08.10.2018 um 16:50 schrieb Colin King:
> > From: Colin Ian King <colin.king@canonical.com>
> >
> > Currently dev->colourfx.enable is being set twice, hence the first
> > occurrance is redundant and can be removed, so remove it. This minor
> > issue was introduced by commit 7b3ad5abf027 ("staging: Import the
> > BCM2835 MMAL-based V4L2 camera driver.").
> >
> > Detected by CoverityScan CID#1419711 ("Unused value")
> >
> > Signed-off-by: Colin Ian King <colin.king@canonical.com>
> > ---
> >  drivers/staging/vc04_services/bcm2835-camera/controls.c | 1 -
> >  1 file changed, 1 deletion(-)
> >
> > diff --git a/drivers/staging/vc04_services/bcm2835-camera/controls.c b/drivers/staging/vc04_services/bcm2835-camera/controls.c
> > index a2c55cb2192a..99831dd4365d 100644
> > --- a/drivers/staging/vc04_services/bcm2835-camera/controls.c
> > +++ b/drivers/staging/vc04_services/bcm2835-camera/controls.c
> > @@ -588,7 +588,6 @@ static int ctrl_set_colfx(struct bm2835_mmal_dev *dev,
> >
> >       control = &dev->component[MMAL_COMPONENT_CAMERA]->control;
> >
> > -     dev->colourfx.enable = (ctrl->val & 0xff00) >> 8;
> >       dev->colourfx.enable = ctrl->val & 0xff;
> >
> >       ret = vchiq_mmal_port_parameter_set(dev->instance, control,
>
> as long as the current behavior is correct, i'm okay with this patch.
> But the byte masking looks suspicious, so i hope Dave can clarify that.

It's writing to the wrong structure member.
The function is used on the V4L2 control V4L2_CID_COLORFX_CBCR, which
is defined as:
V4L2_CID_COLORFX_CBCR (integer)
Determines the Cb and Cr coefficients for V4L2_COLORFX_SET_CBCR color
effect. Bits [7:0] of the supplied 32 bit value are interpreted as Cr
component, bits [15:8] as Cb component and bits [31:16] must be zero.

ctrl->val should therefore be setting dev->colourfx.u and
dev->colourfx.v with those masks. dev->colourfx.enable field should
have been set when going through ctrl_set_image_effect for contol
V4L2_CID_COLORFX set to V4L2_COLORFX_SET_CBCR.

I've confirmed with qv4l2 that that is what is wrong. That's only been
lurking there for almost 5 years - shows how often these weirder
effects get used.
I don't mind whether Colin's patch gets merged and then fixed up, or
drop Colin's patch and apply the correct logic via a new patch.

  Dave
Stefan Wahren Oct. 8, 2018, 5:09 p.m. UTC | #3
Hi Dave,

> Dave Stevenson <dave.stevenson@raspberrypi.org> hat am 8. Oktober 2018 um 18:51 geschrieben:
> 
> 
>  Hi Stefan.
> 
> Thanks for forwarding as the linux-rpi-kernel list hasn't sent it to me as yet.

AFAIK every mail with more than 5 recipients will be delayed.

> 
> On Mon, 8 Oct 2018 at 16:48, Stefan Wahren <stefan.wahren@i2se.com> wrote:
> >
> > Hi Colin,
> >
> > Am 08.10.2018 um 16:50 schrieb Colin King:
> > > From: Colin Ian King <colin.king@canonical.com>
> > >
> > > Currently dev->colourfx.enable is being set twice, hence the first
> > > occurrance is redundant and can be removed, so remove it. This minor
> > > issue was introduced by commit 7b3ad5abf027 ("staging: Import the
> > > BCM2835 MMAL-based V4L2 camera driver.").
> > >
> > > Detected by CoverityScan CID#1419711 ("Unused value")
> > >
> > > Signed-off-by: Colin Ian King <colin.king@canonical.com>
> > > ---
> > >  drivers/staging/vc04_services/bcm2835-camera/controls.c | 1 -
> > >  1 file changed, 1 deletion(-)
> > >
> > > diff --git a/drivers/staging/vc04_services/bcm2835-camera/controls.c b/drivers/staging/vc04_services/bcm2835-camera/controls.c
> > > index a2c55cb2192a..99831dd4365d 100644
> > > --- a/drivers/staging/vc04_services/bcm2835-camera/controls.c
> > > +++ b/drivers/staging/vc04_services/bcm2835-camera/controls.c
> > > @@ -588,7 +588,6 @@ static int ctrl_set_colfx(struct bm2835_mmal_dev *dev,
> > >
> > >       control = &dev->component[MMAL_COMPONENT_CAMERA]->control;
> > >
> > > -     dev->colourfx.enable = (ctrl->val & 0xff00) >> 8;
> > >       dev->colourfx.enable = ctrl->val & 0xff;
> > >
> > >       ret = vchiq_mmal_port_parameter_set(dev->instance, control,
> >
> > as long as the current behavior is correct, i'm okay with this patch.
> > But the byte masking looks suspicious, so i hope Dave can clarify that.
> 
> It's writing to the wrong structure member.
> The function is used on the V4L2 control V4L2_CID_COLORFX_CBCR, which
> is defined as:
> V4L2_CID_COLORFX_CBCR (integer)
> Determines the Cb and Cr coefficients for V4L2_COLORFX_SET_CBCR color
> effect. Bits [7:0] of the supplied 32 bit value are interpreted as Cr
> component, bits [15:8] as Cb component and bits [31:16] must be zero.
> 
> ctrl->val should therefore be setting dev->colourfx.u and
> dev->colourfx.v with those masks. dev->colourfx.enable field should
> have been set when going through ctrl_set_image_effect for contol
> V4L2_CID_COLORFX set to V4L2_COLORFX_SET_CBCR.
> 
> I've confirmed with qv4l2 that that is what is wrong. That's only been
> lurking there for almost 5 years - shows how often these weirder
> effects get used.
> I don't mind whether Colin's patch gets merged and then fixed up, or
> drop Colin's patch and apply the correct logic via a new patch.

no this patch shouldn't be applied. Does it mean you want to send the proper one?

> 
>   Dave
Dave Stevenson Oct. 8, 2018, 5:20 p.m. UTC | #4
On Mon, 8 Oct 2018 at 18:09, Stefan Wahren <stefan.wahren@i2se.com> wrote:
>
> Hi Dave,
>
> > Dave Stevenson <dave.stevenson@raspberrypi.org> hat am 8. Oktober 2018 um 18:51 geschrieben:
> >
> >
> >  Hi Stefan.
> >
> > Thanks for forwarding as the linux-rpi-kernel list hasn't sent it to me as yet.
>
> AFAIK every mail with more than 5 recipients will be delayed.
>
> >
> > On Mon, 8 Oct 2018 at 16:48, Stefan Wahren <stefan.wahren@i2se.com> wrote:
> > >
> > > Hi Colin,
> > >
> > > Am 08.10.2018 um 16:50 schrieb Colin King:
> > > > From: Colin Ian King <colin.king@canonical.com>
> > > >
> > > > Currently dev->colourfx.enable is being set twice, hence the first
> > > > occurrance is redundant and can be removed, so remove it. This minor
> > > > issue was introduced by commit 7b3ad5abf027 ("staging: Import the
> > > > BCM2835 MMAL-based V4L2 camera driver.").
> > > >
> > > > Detected by CoverityScan CID#1419711 ("Unused value")
> > > >
> > > > Signed-off-by: Colin Ian King <colin.king@canonical.com>
> > > > ---
> > > >  drivers/staging/vc04_services/bcm2835-camera/controls.c | 1 -
> > > >  1 file changed, 1 deletion(-)
> > > >
> > > > diff --git a/drivers/staging/vc04_services/bcm2835-camera/controls.c b/drivers/staging/vc04_services/bcm2835-camera/controls.c
> > > > index a2c55cb2192a..99831dd4365d 100644
> > > > --- a/drivers/staging/vc04_services/bcm2835-camera/controls.c
> > > > +++ b/drivers/staging/vc04_services/bcm2835-camera/controls.c
> > > > @@ -588,7 +588,6 @@ static int ctrl_set_colfx(struct bm2835_mmal_dev *dev,
> > > >
> > > >       control = &dev->component[MMAL_COMPONENT_CAMERA]->control;
> > > >
> > > > -     dev->colourfx.enable = (ctrl->val & 0xff00) >> 8;
> > > >       dev->colourfx.enable = ctrl->val & 0xff;
> > > >
> > > >       ret = vchiq_mmal_port_parameter_set(dev->instance, control,
> > >
> > > as long as the current behavior is correct, i'm okay with this patch.
> > > But the byte masking looks suspicious, so i hope Dave can clarify that.
> >
> > It's writing to the wrong structure member.
> > The function is used on the V4L2 control V4L2_CID_COLORFX_CBCR, which
> > is defined as:
> > V4L2_CID_COLORFX_CBCR (integer)
> > Determines the Cb and Cr coefficients for V4L2_COLORFX_SET_CBCR color
> > effect. Bits [7:0] of the supplied 32 bit value are interpreted as Cr
> > component, bits [15:8] as Cb component and bits [31:16] must be zero.
> >
> > ctrl->val should therefore be setting dev->colourfx.u and
> > dev->colourfx.v with those masks. dev->colourfx.enable field should
> > have been set when going through ctrl_set_image_effect for contol
> > V4L2_CID_COLORFX set to V4L2_COLORFX_SET_CBCR.
> >
> > I've confirmed with qv4l2 that that is what is wrong. That's only been
> > lurking there for almost 5 years - shows how often these weirder
> > effects get used.
> > I don't mind whether Colin's patch gets merged and then fixed up, or
> > drop Colin's patch and apply the correct logic via a new patch.
>
> no this patch shouldn't be applied. Does it mean you want to send the proper one?

Want to - not really. Ought to - I guess so.
I've got a bunch of checkpatch and other fixes to come too, so once
I've got a mainline kernel build back up and running I'll roll them
all up and blitz the list.

  Dave
diff mbox series

Patch

diff --git a/drivers/staging/vc04_services/bcm2835-camera/controls.c b/drivers/staging/vc04_services/bcm2835-camera/controls.c
index a2c55cb2192a..99831dd4365d 100644
--- a/drivers/staging/vc04_services/bcm2835-camera/controls.c
+++ b/drivers/staging/vc04_services/bcm2835-camera/controls.c
@@ -588,7 +588,6 @@  static int ctrl_set_colfx(struct bm2835_mmal_dev *dev,
 
 	control = &dev->component[MMAL_COMPONENT_CAMERA]->control;
 
-	dev->colourfx.enable = (ctrl->val & 0xff00) >> 8;
 	dev->colourfx.enable = ctrl->val & 0xff;
 
 	ret = vchiq_mmal_port_parameter_set(dev->instance, control,