===================================================================
@@ -47,7 +47,6 @@ menuconfig FB
config FIRMWARE_EDID
bool "Enable firmware EDID"
depends on FB
- default n
---help---
This enables access to the EDID transferred from the firmware.
On the i386, this is from the Video BIOS. Enable this if DDC/I2C
@@ -65,12 +64,10 @@ config FB_DDC
depends on FB
select I2C_ALGOBIT
select I2C
- default n
config FB_BOOT_VESA_SUPPORT
bool
depends on FB
- default n
---help---
If true, at least one selected framebuffer driver can take advantage
of VESA video modes set at an early boot stage via the vga= parameter.
@@ -78,7 +75,6 @@ config FB_BOOT_VESA_SUPPORT
config FB_CFB_FILLRECT
tristate
depends on FB
- default n
---help---
Include the cfb_fillrect function for generic software rectangle
filling. This is used by drivers that don't provide their own
@@ -87,7 +83,6 @@ config FB_CFB_FILLRECT
config FB_CFB_COPYAREA
tristate
depends on FB
- default n
---help---
Include the cfb_copyarea function for generic software area copying.
This is used by drivers that don't provide their own (accelerated)
@@ -96,7 +91,6 @@ config FB_CFB_COPYAREA
config FB_CFB_IMAGEBLIT
tristate
depends on FB
- default n
---help---
Include the cfb_imageblit function for generic software image
blitting. This is used by drivers that don't provide their own
@@ -105,7 +99,6 @@ config FB_CFB_IMAGEBLIT
config FB_CFB_REV_PIXELS_IN_BYTE
bool
depends on FB
- default n
---help---
Allow generic frame-buffer functions to work on displays with 1, 2
and 4 bits per pixel depths which has opposite order of pixels in
@@ -114,7 +107,6 @@ config FB_CFB_REV_PIXELS_IN_BYTE
config FB_SYS_FILLRECT
tristate
depends on FB
- default n
---help---
Include the sys_fillrect function for generic software rectangle
filling. This is used by drivers that don't provide their own
@@ -123,7 +115,6 @@ config FB_SYS_FILLRECT
config FB_SYS_COPYAREA
tristate
depends on FB
- default n
---help---
Include the sys_copyarea function for generic software area copying.
This is used by drivers that don't provide their own (accelerated)
@@ -132,7 +123,6 @@ config FB_SYS_COPYAREA
config FB_SYS_IMAGEBLIT
tristate
depends on FB
- default n
---help---
Include the sys_imageblit function for generic software image
blitting. This is used by drivers that don't provide their own
@@ -141,7 +131,6 @@ config FB_SYS_IMAGEBLIT
config FB_PROVIDE_GET_FB_UNMAPPED_AREA
bool
depends on FB
- default n
---help---
Allow generic frame-buffer to provide get_fb_unmapped_area
function.
@@ -173,7 +162,6 @@ endchoice
config FB_SYS_FOPS
tristate
depends on FB
- default n
config FB_DEFERRED_IO
bool
@@ -187,7 +175,6 @@ config FB_HECUBA
config FB_SVGALIB
tristate
depends on FB
- default n
---help---
Common utility functions useful to fbdev drivers of VGA-based
cards.
@@ -195,19 +182,16 @@ config FB_SVGALIB
config FB_MACMODES
tristate
depends on FB
- default n
config FB_BACKLIGHT
bool
depends on FB
select BACKLIGHT_LCD_SUPPORT
select BACKLIGHT_CLASS_DEVICE
- default n
config FB_MODE_HELPERS
bool "Enable Video Mode Handling Helpers"
depends on FB
- default n
---help---
This enables functions for handling video modes using the
Generalized Timing Formula and the EDID parser. A few drivers rely
@@ -218,7 +202,6 @@ config FB_MODE_HELPERS
config FB_TILEBLITTING
bool "Enable Tile Blitting Support"
depends on FB
- default n
---help---
This enables tile blitting. Tile blitting is a drawing technique
where the screen is divided into rectangular sections (tiles), whereas
@@ -929,7 +912,6 @@ config FB_NVIDIA_I2C
config FB_NVIDIA_DEBUG
bool "Lots of debug output"
depends on FB_NVIDIA
- default n
help
Say Y here if you want the nVidia driver to output all sorts
of debugging information to provide to the maintainer when
@@ -976,7 +958,6 @@ config FB_RIVA_I2C
config FB_RIVA_DEBUG
bool "Lots of debug output"
depends on FB_RIVA
- default n
help
Say Y here if you want the Riva driver to output all sorts
of debugging information to provide to the maintainer when
@@ -1259,7 +1240,6 @@ config FB_RADEON_BACKLIGHT
config FB_RADEON_DEBUG
bool "Lots of debug output from Radeon driver"
depends on FB_RADEON
- default n
help
Say Y here if you want the Radeon driver to output all sorts
of debugging information to provide to the maintainer when
@@ -1392,7 +1372,6 @@ config FB_SAVAGE_I2C
config FB_SAVAGE_ACCEL
bool "Enable Console Acceleration"
depends on FB_SAVAGE
- default n
help
This option will compile in console acceleration support. If
the resulting framebuffer console has bothersome glitches, then
@@ -1449,7 +1428,6 @@ if FB_VIA
config FB_VIA_DIRECT_PROCFS
bool "direct hardware access via procfs (DEPRECATED)(DANGEROUS)"
- default n
help
Allow direct hardware access to some output registers via procfs.
This is dangerous but may provide the only chance to get the
@@ -1458,7 +1436,6 @@ config FB_VIA_DIRECT_PROCFS
config FB_VIA_X_COMPATIBILITY
bool "X server compatibility"
- default n
help
This option reduces the functionality (power saving, ...) of the
framebuffer to avoid negative impact on the OpenChrome X server.
@@ -1683,7 +1660,6 @@ config FB_WM8505
config FB_WMT_GE_ROPS
bool "VT8500/WM8xxx accelerated raster ops support"
depends on (FB = y) && (FB_VT8500 || FB_WM8505)
- default n
help
This adds support for accelerated raster operations on the
VIA VT8500 and Wondermedia 85xx series SoCs.
@@ -1793,17 +1769,14 @@ config FB_PXA
config FB_PXA_OVERLAY
bool "Support PXA27x/PXA3xx Overlay(s) as framebuffer"
- default n
depends on FB_PXA && (PXA27x || PXA3xx)
config FB_PXA_SMARTPANEL
bool "PXA Smartpanel LCD support"
- default n
depends on FB_PXA
config FB_PXA_PARAMETERS
bool "PXA LCD command line parameters"
- default n
depends on FB_PXA
---help---
Enable the use of kernel command line or module parameters
@@ -1841,7 +1814,6 @@ config FB_MBX
config FB_MBX_DEBUG
bool "Enable debugging info via debugfs"
depends on FB_MBX && DEBUG_FS
- default n
---help---
Enable this if you want debugging information using the debug
filesystem (debugfs)
===================================================================
@@ -3,7 +3,6 @@ if MMP_DISP
config MMP_DISP_CONTROLLER
bool "mmp display controller hw support"
depends on CPU_PXA910 || CPU_MMP2
- default n
help
Marvell MMP display hw controller support
this controller is used on Marvell PXA910 and
===================================================================
@@ -2,6 +2,5 @@
config MMP_PANEL_TPOHVGA
bool "tpohvga panel TJ032MD01BW support"
depends on SPI_MASTER
- default n
help
tpohvga panel support
===================================================================
@@ -10,7 +10,6 @@ config FB_OMAP2_DSS
config FB_OMAP2_DSS_DEBUG
bool "Debug support"
- default n
help
This enables printing of debug messages. Alternatively, debug messages
can also be enabled by setting CONFIG_DYNAMIC_DEBUG and then setting
@@ -19,7 +18,6 @@ config FB_OMAP2_DSS_DEBUG
config FB_OMAP2_DSS_DEBUGFS
bool "Debugfs filesystem support"
depends on DEBUG_FS
- default n
help
This enables debugfs for OMAPDSS at <debugfs>/omapdss. This enables
querying about clock configuration and register configuration of dss,
@@ -28,7 +26,6 @@ config FB_OMAP2_DSS_DEBUGFS
config FB_OMAP2_DSS_COLLECT_IRQ_STATS
bool "Collect DSS IRQ statistics"
depends on FB_OMAP2_DSS_DEBUGFS
- default n
help
Collect DSS IRQ statistics, printable via debugfs.
@@ -45,7 +42,6 @@ config FB_OMAP2_DSS_DPI
config FB_OMAP2_DSS_RFBI
bool "RFBI support"
depends on BROKEN
- default n
help
MIPI DBI support (RFBI, Remote Framebuffer Interface, in Texas
Instrument's terminology).
@@ -73,7 +69,6 @@ config FB_OMAP4_DSS_HDMI
config FB_OMAP5_DSS_HDMI
bool "HDMI support for OMAP5"
- default n
select FB_OMAP2_DSS_HDMI_COMMON
help
HDMI Interface for OMAP5 and similar cores. This adds the High
@@ -82,7 +77,6 @@ config FB_OMAP5_DSS_HDMI
config FB_OMAP2_DSS_SDI
bool "SDI support"
- default n
help
SDI (Serial Display Interface) support.
@@ -91,7 +85,6 @@ config FB_OMAP2_DSS_SDI
config FB_OMAP2_DSS_DSI
bool "DSI support"
- default n
help
MIPI DSI (Display Serial Interface) support.
'default n' is the default value for any bool or tristate Kconfig setting so there is no need to write it explicitly. Also since commit f467c5640c29 ("kconfig: only write '# CONFIG_FOO is not set' for visible symbols") the Kconfig behavior is the same regardless of 'default n' being present or not: ... One side effect of (and the main motivation for) this change is making the following two definitions behave exactly the same: config FOO bool config FOO bool default n With this change, neither of these will generate a '# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied). That might make it clearer to people that a bare 'default n' is redundant. ... Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> --- drivers/video/fbdev/Kconfig | 28 --------------------------- drivers/video/fbdev/mmp/hw/Kconfig | 1 drivers/video/fbdev/mmp/panel/Kconfig | 1 drivers/video/fbdev/omap2/omapfb/dss/Kconfig | 7 ------ 4 files changed, 37 deletions(-)