| Message ID | 20181002135538.12113-1-den@openvz.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/1] qmp, hmp: make subsystem/system-vendor identities optional | expand |
On 10/2/18 8:55 AM, Denis V. Lunev wrote: > According to PCI specification subsystem id and subsystem vendor id are > optinal and could be abscent in Type1 header and can be found on s/optinal/optional/ s/abscent/absent/ > different offsets within Type0 and Type2 headers. > > Thus we should make this data optional in struct PciDeviceId and skip > reporting them via HMP if the information is not available. > > Additional (wrong information) about PCI bridges (Type1 devices) has been > added in 5383a705 and fortunately not released. This patch fixes that > problem. The problem was spotted by Markus. > > Signed-off-by: Denis V. Lunev <den@openvz.org> > CC: "Dr. David Alan Gilbert" <dgilbert@redhat.com> > CC: Eric Blake <eblake@redhat.com> > CC: Markus Armbruster <armbru@redhat.com> > --- > hmp.c | 6 ++++-- > hw/pci/pci.c | 13 ++++++++++--- > qapi/misc.json | 4 ++-- > 3 files changed, 16 insertions(+), 7 deletions(-) > Reviewed-by: Eric Blake <eblake@redhat.com>
* Denis V. Lunev (den@openvz.org) wrote: > According to PCI specification subsystem id and subsystem vendor id are > optinal and could be abscent in Type1 header and can be found on > different offsets within Type0 and Type2 headers. > > Thus we should make this data optional in struct PciDeviceId and skip > reporting them via HMP if the information is not available. > > Additional (wrong information) about PCI bridges (Type1 devices) has been > added in 5383a705 and fortunately not released. This patch fixes that > problem. The problem was spotted by Markus. > > Signed-off-by: Denis V. Lunev <den@openvz.org> Looks good to me, thanks Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> > CC: "Dr. David Alan Gilbert" <dgilbert@redhat.com> > CC: Eric Blake <eblake@redhat.com> > CC: Markus Armbruster <armbru@redhat.com> > --- > hmp.c | 6 ++++-- > hw/pci/pci.c | 13 ++++++++++--- > qapi/misc.json | 4 ++-- > 3 files changed, 16 insertions(+), 7 deletions(-) > > diff --git a/hmp.c b/hmp.c > index 3a9f797677..55633d29a3 100644 > --- a/hmp.c > +++ b/hmp.c > @@ -824,8 +824,10 @@ static void hmp_info_pci_device(Monitor *mon, const PciDeviceInfo *dev) > > monitor_printf(mon, ": PCI device %04" PRIx64 ":%04" PRIx64 "\n", > dev->id->vendor, dev->id->device); > - monitor_printf(mon, " PCI subsystem %04" PRIx64 ":%04" PRIx64 "\n", > - dev->id->subsystem_vendor, dev->id->subsystem); > + if (dev->id->has_subsystem_vendor && dev->id->has_subsystem) { > + monitor_printf(mon, " PCI subsystem %04" PRIx64 ":%04" PRIx64 "\n", > + dev->id->subsystem_vendor, dev->id->subsystem); > + } > > if (dev->has_irq) { > monitor_printf(mon, " IRQ %" PRId64 ".\n", dev->irq); > diff --git a/hw/pci/pci.c b/hw/pci/pci.c > index 51d0dec466..b937f0dc0a 100644 > --- a/hw/pci/pci.c > +++ b/hw/pci/pci.c > @@ -1737,9 +1737,6 @@ static PciDeviceInfo *qmp_query_pci_device(PCIDevice *dev, PCIBus *bus, > info->id = g_new0(PciDeviceId, 1); > info->id->vendor = pci_get_word(dev->config + PCI_VENDOR_ID); > info->id->device = pci_get_word(dev->config + PCI_DEVICE_ID); > - info->id->subsystem = pci_get_word(dev->config + PCI_SUBSYSTEM_ID); > - info->id->subsystem_vendor = > - pci_get_word(dev->config + PCI_SUBSYSTEM_VENDOR_ID); > info->regions = qmp_query_pci_regions(dev); > info->qdev_id = g_strdup(dev->qdev.id ? dev->qdev.id : ""); > > @@ -1752,6 +1749,16 @@ static PciDeviceInfo *qmp_query_pci_device(PCIDevice *dev, PCIBus *bus, > if (type == PCI_HEADER_TYPE_BRIDGE) { > info->has_pci_bridge = true; > info->pci_bridge = qmp_query_pci_bridge(dev, bus, bus_num); > + } else if (type == PCI_HEADER_TYPE_NORMAL) { > + info->id->has_subsystem = info->id->has_subsystem_vendor = true; > + info->id->subsystem = pci_get_word(dev->config + PCI_SUBSYSTEM_ID); > + info->id->subsystem_vendor = > + pci_get_word(dev->config + PCI_SUBSYSTEM_VENDOR_ID); > + } else if (type == PCI_HEADER_TYPE_CARDBUS) { > + info->id->has_subsystem = info->id->has_subsystem_vendor = true; > + info->id->subsystem = pci_get_word(dev->config + PCI_CB_SUBSYSTEM_ID); > + info->id->subsystem_vendor = > + pci_get_word(dev->config + PCI_CB_SUBSYSTEM_VENDOR_ID); > } > > return info; > diff --git a/qapi/misc.json b/qapi/misc.json > index ada9af5add..95a6ed022d 100644 > --- a/qapi/misc.json > +++ b/qapi/misc.json > @@ -839,8 +839,8 @@ > # Since: 2.4 > ## > { 'struct': 'PciDeviceId', > - 'data': {'device': 'int', 'vendor': 'int', 'subsystem': 'int', > - 'subsystem-vendor': 'int'} } > + 'data': {'device': 'int', 'vendor': 'int', '*subsystem': 'int', > + '*subsystem-vendor': 'int'} } > > ## > # @PciDeviceInfo: > -- > 2.17.1 > -- Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
"Denis V. Lunev" <den@openvz.org> writes: > According to PCI specification subsystem id and subsystem vendor id are > optinal and could be abscent in Type1 header and can be found on > different offsets within Type0 and Type2 headers. Well, they *are* absent in Type1 headers. Perhaps: According to PCI specification, subsystem id and subsystem vendor id are present only in type 0 and type 2 headers (at different offsets), but not in type 1 headers. > Thus we should make this data optional in struct PciDeviceId and skip > reporting them via HMP if the information is not available. > > Additional (wrong information) about PCI bridges (Type1 devices) has been > added in 5383a705 and fortunately not released. This patch fixes that > problem. The problem was spotted by Markus. A machine-readable way to phrase the last sentence is Reported-by: Markus Armbruster <armbru@redhat.com> > Signed-off-by: Denis V. Lunev <den@openvz.org> > CC: "Dr. David Alan Gilbert" <dgilbert@redhat.com> > CC: Eric Blake <eblake@redhat.com> > CC: Markus Armbruster <armbru@redhat.com> > --- > hmp.c | 6 ++++-- > hw/pci/pci.c | 13 ++++++++++--- > qapi/misc.json | 4 ++-- > 3 files changed, 16 insertions(+), 7 deletions(-) > > diff --git a/hmp.c b/hmp.c > index 3a9f797677..55633d29a3 100644 > --- a/hmp.c > +++ b/hmp.c > @@ -824,8 +824,10 @@ static void hmp_info_pci_device(Monitor *mon, const PciDeviceInfo *dev) > > monitor_printf(mon, ": PCI device %04" PRIx64 ":%04" PRIx64 "\n", > dev->id->vendor, dev->id->device); > - monitor_printf(mon, " PCI subsystem %04" PRIx64 ":%04" PRIx64 "\n", > - dev->id->subsystem_vendor, dev->id->subsystem); > + if (dev->id->has_subsystem_vendor && dev->id->has_subsystem) { > + monitor_printf(mon, " PCI subsystem %04" PRIx64 ":%04" PRIx64 "\n", > + dev->id->subsystem_vendor, dev->id->subsystem); > + } > > if (dev->has_irq) { > monitor_printf(mon, " IRQ %" PRId64 ".\n", dev->irq); > diff --git a/hw/pci/pci.c b/hw/pci/pci.c > index 51d0dec466..b937f0dc0a 100644 > --- a/hw/pci/pci.c > +++ b/hw/pci/pci.c > @@ -1737,9 +1737,6 @@ static PciDeviceInfo *qmp_query_pci_device(PCIDevice *dev, PCIBus *bus, > info->id = g_new0(PciDeviceId, 1); > info->id->vendor = pci_get_word(dev->config + PCI_VENDOR_ID); > info->id->device = pci_get_word(dev->config + PCI_DEVICE_ID); > - info->id->subsystem = pci_get_word(dev->config + PCI_SUBSYSTEM_ID); > - info->id->subsystem_vendor = > - pci_get_word(dev->config + PCI_SUBSYSTEM_VENDOR_ID); > info->regions = qmp_query_pci_regions(dev); > info->qdev_id = g_strdup(dev->qdev.id ? dev->qdev.id : ""); > > @@ -1752,6 +1749,16 @@ static PciDeviceInfo *qmp_query_pci_device(PCIDevice *dev, PCIBus *bus, > if (type == PCI_HEADER_TYPE_BRIDGE) { > info->has_pci_bridge = true; > info->pci_bridge = qmp_query_pci_bridge(dev, bus, bus_num); > + } else if (type == PCI_HEADER_TYPE_NORMAL) { > + info->id->has_subsystem = info->id->has_subsystem_vendor = true; > + info->id->subsystem = pci_get_word(dev->config + PCI_SUBSYSTEM_ID); > + info->id->subsystem_vendor = > + pci_get_word(dev->config + PCI_SUBSYSTEM_VENDOR_ID); > + } else if (type == PCI_HEADER_TYPE_CARDBUS) { > + info->id->has_subsystem = info->id->has_subsystem_vendor = true; > + info->id->subsystem = pci_get_word(dev->config + PCI_CB_SUBSYSTEM_ID); > + info->id->subsystem_vendor = > + pci_get_word(dev->config + PCI_CB_SUBSYSTEM_VENDOR_ID); > } > > return info; > diff --git a/qapi/misc.json b/qapi/misc.json > index ada9af5add..95a6ed022d 100644 > --- a/qapi/misc.json > +++ b/qapi/misc.json > @@ -839,8 +839,8 @@ > # Since: 2.4 > ## > { 'struct': 'PciDeviceId', > - 'data': {'device': 'int', 'vendor': 'int', 'subsystem': 'int', > - 'subsystem-vendor': 'int'} } > + 'data': {'device': 'int', 'vendor': 'int', '*subsystem': 'int', > + '*subsystem-vendor': 'int'} } 'uint16' would match PCI, but I since we didn't for @device and @vendor, we probably shouldn't for @subsystem and @subsystem-vendor. > > ## > # @PciDeviceInfo: With Eric's spelling corrections or my rephrasing of the commit message: Reviewed-by: Markus Armbruster <armbru@redhat.com> David, would you like to pick this up?
* Markus Armbruster (armbru@redhat.com) wrote: > "Denis V. Lunev" <den@openvz.org> writes: > > > According to PCI specification subsystem id and subsystem vendor id are > > optinal and could be abscent in Type1 header and can be found on > > different offsets within Type0 and Type2 headers. > > Well, they *are* absent in Type1 headers. Perhaps: > > According to PCI specification, subsystem id and subsystem vendor id > are present only in type 0 and type 2 headers (at different offsets), > but not in type 1 headers. > > > Thus we should make this data optional in struct PciDeviceId and skip > > reporting them via HMP if the information is not available. > > > > Additional (wrong information) about PCI bridges (Type1 devices) has been > > added in 5383a705 and fortunately not released. This patch fixes that > > problem. The problem was spotted by Markus. > > A machine-readable way to phrase the last sentence is > Reported-by: Markus Armbruster <armbru@redhat.com> > > > Signed-off-by: Denis V. Lunev <den@openvz.org> > > CC: "Dr. David Alan Gilbert" <dgilbert@redhat.com> > > CC: Eric Blake <eblake@redhat.com> > > CC: Markus Armbruster <armbru@redhat.com> > > --- > > hmp.c | 6 ++++-- > > hw/pci/pci.c | 13 ++++++++++--- > > qapi/misc.json | 4 ++-- > > 3 files changed, 16 insertions(+), 7 deletions(-) > > > > diff --git a/hmp.c b/hmp.c > > index 3a9f797677..55633d29a3 100644 > > --- a/hmp.c > > +++ b/hmp.c > > @@ -824,8 +824,10 @@ static void hmp_info_pci_device(Monitor *mon, const PciDeviceInfo *dev) > > > > monitor_printf(mon, ": PCI device %04" PRIx64 ":%04" PRIx64 "\n", > > dev->id->vendor, dev->id->device); > > - monitor_printf(mon, " PCI subsystem %04" PRIx64 ":%04" PRIx64 "\n", > > - dev->id->subsystem_vendor, dev->id->subsystem); > > + if (dev->id->has_subsystem_vendor && dev->id->has_subsystem) { > > + monitor_printf(mon, " PCI subsystem %04" PRIx64 ":%04" PRIx64 "\n", > > + dev->id->subsystem_vendor, dev->id->subsystem); > > + } > > > > if (dev->has_irq) { > > monitor_printf(mon, " IRQ %" PRId64 ".\n", dev->irq); > > diff --git a/hw/pci/pci.c b/hw/pci/pci.c > > index 51d0dec466..b937f0dc0a 100644 > > --- a/hw/pci/pci.c > > +++ b/hw/pci/pci.c > > @@ -1737,9 +1737,6 @@ static PciDeviceInfo *qmp_query_pci_device(PCIDevice *dev, PCIBus *bus, > > info->id = g_new0(PciDeviceId, 1); > > info->id->vendor = pci_get_word(dev->config + PCI_VENDOR_ID); > > info->id->device = pci_get_word(dev->config + PCI_DEVICE_ID); > > - info->id->subsystem = pci_get_word(dev->config + PCI_SUBSYSTEM_ID); > > - info->id->subsystem_vendor = > > - pci_get_word(dev->config + PCI_SUBSYSTEM_VENDOR_ID); > > info->regions = qmp_query_pci_regions(dev); > > info->qdev_id = g_strdup(dev->qdev.id ? dev->qdev.id : ""); > > > > @@ -1752,6 +1749,16 @@ static PciDeviceInfo *qmp_query_pci_device(PCIDevice *dev, PCIBus *bus, > > if (type == PCI_HEADER_TYPE_BRIDGE) { > > info->has_pci_bridge = true; > > info->pci_bridge = qmp_query_pci_bridge(dev, bus, bus_num); > > + } else if (type == PCI_HEADER_TYPE_NORMAL) { > > + info->id->has_subsystem = info->id->has_subsystem_vendor = true; > > + info->id->subsystem = pci_get_word(dev->config + PCI_SUBSYSTEM_ID); > > + info->id->subsystem_vendor = > > + pci_get_word(dev->config + PCI_SUBSYSTEM_VENDOR_ID); > > + } else if (type == PCI_HEADER_TYPE_CARDBUS) { > > + info->id->has_subsystem = info->id->has_subsystem_vendor = true; > > + info->id->subsystem = pci_get_word(dev->config + PCI_CB_SUBSYSTEM_ID); > > + info->id->subsystem_vendor = > > + pci_get_word(dev->config + PCI_CB_SUBSYSTEM_VENDOR_ID); > > } > > > > return info; > > diff --git a/qapi/misc.json b/qapi/misc.json > > index ada9af5add..95a6ed022d 100644 > > --- a/qapi/misc.json > > +++ b/qapi/misc.json > > @@ -839,8 +839,8 @@ > > # Since: 2.4 > > ## > > { 'struct': 'PciDeviceId', > > - 'data': {'device': 'int', 'vendor': 'int', 'subsystem': 'int', > > - 'subsystem-vendor': 'int'} } > > + 'data': {'device': 'int', 'vendor': 'int', '*subsystem': 'int', > > + '*subsystem-vendor': 'int'} } > > 'uint16' would match PCI, but I since we didn't for @device and @vendor, > we probably shouldn't for @subsystem and @subsystem-vendor. > > > > > ## > > # @PciDeviceInfo: > > With Eric's spelling corrections or my rephrasing of the commit message: > Reviewed-by: Markus Armbruster <armbru@redhat.com> > > David, would you like to pick this up? Yes, I can do. Dave -- Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
* Markus Armbruster (armbru@redhat.com) wrote: > "Denis V. Lunev" <den@openvz.org> writes: > > > According to PCI specification subsystem id and subsystem vendor id are > > optinal and could be abscent in Type1 header and can be found on > > different offsets within Type0 and Type2 headers. > > Well, they *are* absent in Type1 headers. Perhaps: > > According to PCI specification, subsystem id and subsystem vendor id > are present only in type 0 and type 2 headers (at different offsets), > but not in type 1 headers. Queued with that text. > > Thus we should make this data optional in struct PciDeviceId and skip > > reporting them via HMP if the information is not available. > > > > Additional (wrong information) about PCI bridges (Type1 devices) has been > > added in 5383a705 and fortunately not released. This patch fixes that > > problem. The problem was spotted by Markus. > > A machine-readable way to phrase the last sentence is > Reported-by: Markus Armbruster <armbru@redhat.com> > > > Signed-off-by: Denis V. Lunev <den@openvz.org> > > CC: "Dr. David Alan Gilbert" <dgilbert@redhat.com> > > CC: Eric Blake <eblake@redhat.com> > > CC: Markus Armbruster <armbru@redhat.com> > > --- > > hmp.c | 6 ++++-- > > hw/pci/pci.c | 13 ++++++++++--- > > qapi/misc.json | 4 ++-- > > 3 files changed, 16 insertions(+), 7 deletions(-) > > > > diff --git a/hmp.c b/hmp.c > > index 3a9f797677..55633d29a3 100644 > > --- a/hmp.c > > +++ b/hmp.c > > @@ -824,8 +824,10 @@ static void hmp_info_pci_device(Monitor *mon, const PciDeviceInfo *dev) > > > > monitor_printf(mon, ": PCI device %04" PRIx64 ":%04" PRIx64 "\n", > > dev->id->vendor, dev->id->device); > > - monitor_printf(mon, " PCI subsystem %04" PRIx64 ":%04" PRIx64 "\n", > > - dev->id->subsystem_vendor, dev->id->subsystem); > > + if (dev->id->has_subsystem_vendor && dev->id->has_subsystem) { > > + monitor_printf(mon, " PCI subsystem %04" PRIx64 ":%04" PRIx64 "\n", > > + dev->id->subsystem_vendor, dev->id->subsystem); > > + } > > > > if (dev->has_irq) { > > monitor_printf(mon, " IRQ %" PRId64 ".\n", dev->irq); > > diff --git a/hw/pci/pci.c b/hw/pci/pci.c > > index 51d0dec466..b937f0dc0a 100644 > > --- a/hw/pci/pci.c > > +++ b/hw/pci/pci.c > > @@ -1737,9 +1737,6 @@ static PciDeviceInfo *qmp_query_pci_device(PCIDevice *dev, PCIBus *bus, > > info->id = g_new0(PciDeviceId, 1); > > info->id->vendor = pci_get_word(dev->config + PCI_VENDOR_ID); > > info->id->device = pci_get_word(dev->config + PCI_DEVICE_ID); > > - info->id->subsystem = pci_get_word(dev->config + PCI_SUBSYSTEM_ID); > > - info->id->subsystem_vendor = > > - pci_get_word(dev->config + PCI_SUBSYSTEM_VENDOR_ID); > > info->regions = qmp_query_pci_regions(dev); > > info->qdev_id = g_strdup(dev->qdev.id ? dev->qdev.id : ""); > > > > @@ -1752,6 +1749,16 @@ static PciDeviceInfo *qmp_query_pci_device(PCIDevice *dev, PCIBus *bus, > > if (type == PCI_HEADER_TYPE_BRIDGE) { > > info->has_pci_bridge = true; > > info->pci_bridge = qmp_query_pci_bridge(dev, bus, bus_num); > > + } else if (type == PCI_HEADER_TYPE_NORMAL) { > > + info->id->has_subsystem = info->id->has_subsystem_vendor = true; > > + info->id->subsystem = pci_get_word(dev->config + PCI_SUBSYSTEM_ID); > > + info->id->subsystem_vendor = > > + pci_get_word(dev->config + PCI_SUBSYSTEM_VENDOR_ID); > > + } else if (type == PCI_HEADER_TYPE_CARDBUS) { > > + info->id->has_subsystem = info->id->has_subsystem_vendor = true; > > + info->id->subsystem = pci_get_word(dev->config + PCI_CB_SUBSYSTEM_ID); > > + info->id->subsystem_vendor = > > + pci_get_word(dev->config + PCI_CB_SUBSYSTEM_VENDOR_ID); > > } > > > > return info; > > diff --git a/qapi/misc.json b/qapi/misc.json > > index ada9af5add..95a6ed022d 100644 > > --- a/qapi/misc.json > > +++ b/qapi/misc.json > > @@ -839,8 +839,8 @@ > > # Since: 2.4 > > ## > > { 'struct': 'PciDeviceId', > > - 'data': {'device': 'int', 'vendor': 'int', 'subsystem': 'int', > > - 'subsystem-vendor': 'int'} } > > + 'data': {'device': 'int', 'vendor': 'int', '*subsystem': 'int', > > + '*subsystem-vendor': 'int'} } > > 'uint16' would match PCI, but I since we didn't for @device and @vendor, > we probably shouldn't for @subsystem and @subsystem-vendor. > > > > > ## > > # @PciDeviceInfo: > > With Eric's spelling corrections or my rephrasing of the commit message: > Reviewed-by: Markus Armbruster <armbru@redhat.com> > > David, would you like to pick this up? > -- Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
diff --git a/hmp.c b/hmp.c index 3a9f797677..55633d29a3 100644 --- a/hmp.c +++ b/hmp.c @@ -824,8 +824,10 @@ static void hmp_info_pci_device(Monitor *mon, const PciDeviceInfo *dev) monitor_printf(mon, ": PCI device %04" PRIx64 ":%04" PRIx64 "\n", dev->id->vendor, dev->id->device); - monitor_printf(mon, " PCI subsystem %04" PRIx64 ":%04" PRIx64 "\n", - dev->id->subsystem_vendor, dev->id->subsystem); + if (dev->id->has_subsystem_vendor && dev->id->has_subsystem) { + monitor_printf(mon, " PCI subsystem %04" PRIx64 ":%04" PRIx64 "\n", + dev->id->subsystem_vendor, dev->id->subsystem); + } if (dev->has_irq) { monitor_printf(mon, " IRQ %" PRId64 ".\n", dev->irq); diff --git a/hw/pci/pci.c b/hw/pci/pci.c index 51d0dec466..b937f0dc0a 100644 --- a/hw/pci/pci.c +++ b/hw/pci/pci.c @@ -1737,9 +1737,6 @@ static PciDeviceInfo *qmp_query_pci_device(PCIDevice *dev, PCIBus *bus, info->id = g_new0(PciDeviceId, 1); info->id->vendor = pci_get_word(dev->config + PCI_VENDOR_ID); info->id->device = pci_get_word(dev->config + PCI_DEVICE_ID); - info->id->subsystem = pci_get_word(dev->config + PCI_SUBSYSTEM_ID); - info->id->subsystem_vendor = - pci_get_word(dev->config + PCI_SUBSYSTEM_VENDOR_ID); info->regions = qmp_query_pci_regions(dev); info->qdev_id = g_strdup(dev->qdev.id ? dev->qdev.id : ""); @@ -1752,6 +1749,16 @@ static PciDeviceInfo *qmp_query_pci_device(PCIDevice *dev, PCIBus *bus, if (type == PCI_HEADER_TYPE_BRIDGE) { info->has_pci_bridge = true; info->pci_bridge = qmp_query_pci_bridge(dev, bus, bus_num); + } else if (type == PCI_HEADER_TYPE_NORMAL) { + info->id->has_subsystem = info->id->has_subsystem_vendor = true; + info->id->subsystem = pci_get_word(dev->config + PCI_SUBSYSTEM_ID); + info->id->subsystem_vendor = + pci_get_word(dev->config + PCI_SUBSYSTEM_VENDOR_ID); + } else if (type == PCI_HEADER_TYPE_CARDBUS) { + info->id->has_subsystem = info->id->has_subsystem_vendor = true; + info->id->subsystem = pci_get_word(dev->config + PCI_CB_SUBSYSTEM_ID); + info->id->subsystem_vendor = + pci_get_word(dev->config + PCI_CB_SUBSYSTEM_VENDOR_ID); } return info; diff --git a/qapi/misc.json b/qapi/misc.json index ada9af5add..95a6ed022d 100644 --- a/qapi/misc.json +++ b/qapi/misc.json @@ -839,8 +839,8 @@ # Since: 2.4 ## { 'struct': 'PciDeviceId', - 'data': {'device': 'int', 'vendor': 'int', 'subsystem': 'int', - 'subsystem-vendor': 'int'} } + 'data': {'device': 'int', 'vendor': 'int', '*subsystem': 'int', + '*subsystem-vendor': 'int'} } ## # @PciDeviceInfo:
According to PCI specification subsystem id and subsystem vendor id are optinal and could be abscent in Type1 header and can be found on different offsets within Type0 and Type2 headers. Thus we should make this data optional in struct PciDeviceId and skip reporting them via HMP if the information is not available. Additional (wrong information) about PCI bridges (Type1 devices) has been added in 5383a705 and fortunately not released. This patch fixes that problem. The problem was spotted by Markus. Signed-off-by: Denis V. Lunev <den@openvz.org> CC: "Dr. David Alan Gilbert" <dgilbert@redhat.com> CC: Eric Blake <eblake@redhat.com> CC: Markus Armbruster <armbru@redhat.com> --- hmp.c | 6 ++++-- hw/pci/pci.c | 13 ++++++++++--- qapi/misc.json | 4 ++-- 3 files changed, 16 insertions(+), 7 deletions(-)