diff mbox series

[v3,3/7] arm64: dts: allwinner: axp803: add AC and battery power supplies

Message ID 20181008181908.9456-4-oskari@lemmela.net (mailing list archive)
State Superseded, archived
Headers show
Series AXP8x3 AC and battery power supply support | expand

Commit Message

Oskari Lemmelä Oct. 8, 2018, 6:19 p.m. UTC 
AXP803 is compatible with AXP813. Add DT nodes ADC, GPIO,
AC and battery power supplies.

Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
---
 arch/arm64/boot/dts/allwinner/axp803.dtsi | 31 +++++++++++++++++++++++
 1 file changed, 31 insertions(+)

Comments

Quentin Schulz Oct. 12, 2018, 7:33 p.m. UTC | #1 
Hi Oskari,

On Mon, Oct 08, 2018 at 09:19:04PM +0300, Oskari Lemmela wrote:
> AXP803 is compatible with AXP813. Add DT nodes ADC, GPIO,
> AC and battery power supplies.
> 

Reviewed-by: Quentin Schulz <quentin.schulz@bootlin.com>

Thanks,
Quentin
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/allwinner/axp803.dtsi b/arch/arm64/boot/dts/allwinner/axp803.dtsi
index e5eae8bafc42..128177178615 100644
--- a/arch/arm64/boot/dts/allwinner/axp803.dtsi
+++ b/arch/arm64/boot/dts/allwinner/axp803.dtsi
@@ -49,6 +49,37 @@ 
 	interrupt-controller;
 	#interrupt-cells = <1>;
 
+	ac_power_supply: ac-power-supply {
+		compatible = "x-powers,axp813-ac-power-supply";
+		status = "disabled";
+	};
+
+	axp_adc: adc {
+		compatible = "x-powers,axp813-adc";
+		#io-channel-cells = <1>;
+	};
+
+	axp_gpio: gpio {
+		compatible = "x-powers,axp813-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio0_ldo: gpio0-ldo {
+			pins = "GPIO0";
+			function = "ldo";
+		};
+
+		gpio1_ldo: gpio1-ldo {
+			pins = "GPIO1";
+			function = "ldo";
+		};
+	};
+
+	battery_power_supply: battery-power-supply {
+		compatible = "x-powers,axp813-battery-power-supply";
+		status = "disabled";
+	};
+
 	regulators {
 		/* Default work frequency for buck regulators */
 		x-powers,dcdc-freq = <3000>;