| Message ID | 20181016123409.13275-1-linus.walleij@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/2,v2] drm/panel: Add DT bindings for Samsung S6D16D0 | expand |
Hi Linus. On Tue, Oct 16, 2018 at 02:34:08PM +0200, Linus Walleij wrote: > This adds the device tree bindings for the Samsung S6D16D0 > panel. This is a command mode only panel using DSI. > > Cc: devicetree@vger.kernel.org > Cc: Sam Ravnborg <sam@ravnborg.org> > Cc: Andrzej Hajda <a.hajda@samsung.com> > Signed-off-by: Linus Walleij <linus.walleij@linaro.org> > --- > ChangeLog v1->v2: > - None, if you're OK with it please ACK so I can queue > the patch. Acked-by: Sam Ravnborg <sam@ravnborg.org> Sam
On Tue, 16 Oct 2018 14:34:08 +0200, Linus Walleij wrote: > This adds the device tree bindings for the Samsung S6D16D0 > panel. This is a command mode only panel using DSI. > > Cc: devicetree@vger.kernel.org > Cc: Sam Ravnborg <sam@ravnborg.org> > Cc: Andrzej Hajda <a.hajda@samsung.com> > Signed-off-by: Linus Walleij <linus.walleij@linaro.org> > --- > ChangeLog v1->v2: > - None, if you're OK with it please ACK so I can queue > the patch. > --- > .../display/panel/samsung,s6d16d0.txt | 30 +++++++++++++++++++ > 1 file changed, 30 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.txt > Reviewed-by: Rob Herring <robh@kernel.org>
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.txt b/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.txt new file mode 100644 index 000000000000..b94e366f451b --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.txt @@ -0,0 +1,30 @@ +Samsung S6D16D0 4" 864x480 AMOLED panel + +Required properties: + - compatible: should be: + "samsung,s6d16d0", + - reg: the virtual channel number of a DSI peripheral + - vdd1-supply: I/O voltage supply + - reset-gpios: a GPIO spec for the reset pin (active low) + +The device node can contain one 'port' child node with one child +'endpoint' node, according to the bindings defined in +media/video-interfaces.txt. This node should describe panel's video bus. + +Example: +&dsi { + ... + + panel@0 { + compatible = "samsung,s6d16d0"; + reg = <0>; + vdd1-supply = <&foo>; + reset-gpios = <&foo_gpio 0 GPIO_ACTIVE_LOW>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; +};
This adds the device tree bindings for the Samsung S6D16D0 panel. This is a command mode only panel using DSI. Cc: devicetree@vger.kernel.org Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- ChangeLog v1->v2: - None, if you're OK with it please ACK so I can queue the patch. --- .../display/panel/samsung,s6d16d0.txt | 30 +++++++++++++++++++ 1 file changed, 30 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.txt