| Message ID | 20181017222710.254994-1-kunyi@google.com (mailing list archive) |
|---|---|
| State | Accepted |
| Headers | show |
| Series | [v3,1/2] hwmon: (adm1275): Allow setting shunt reg value | expand |
On Wed, 17 Oct 2018 15:27:09 -0700, Kun Yi wrote: > adm127x are hot-swap controllers that allow a circuit board to be removed from > or inserted into a live backplane. This patch adds the device tree > bindings documentation. > > Signed-off-by: Kun Yi <kunyi@google.com> > --- > .../devicetree/bindings/hwmon/adm1275.txt | 25 +++++++++++++++++++ > 1 file changed, 25 insertions(+) > create mode 100644 Documentation/devicetree/bindings/hwmon/adm1275.txt > Reviewed-by: Rob Herring <robh@kernel.org>
On Thu, Oct 18, 2018 at 12:48 PM Rob Herring <robh@kernel.org> wrote: > > On Wed, 17 Oct 2018 15:27:09 -0700, Kun Yi wrote: > > adm127x are hot-swap controllers that allow a circuit board to be removed from > > or inserted into a live backplane. This patch adds the device tree > > bindings documentation. > > > > Signed-off-by: Kun Yi <kunyi@google.com> > > --- > > .../devicetree/bindings/hwmon/adm1275.txt | 25 +++++++++++++++++++ > > 1 file changed, 25 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/hwmon/adm1275.txt > > > > Reviewed-by: Rob Herring <robh@kernel.org> Thanks a lot for the Review!
diff --git a/Documentation/devicetree/bindings/hwmon/adm1275.txt b/Documentation/devicetree/bindings/hwmon/adm1275.txt new file mode 100644 index 000000000000..1ecd03f3da4d --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/adm1275.txt @@ -0,0 +1,25 @@ +adm1275 properties + +Required properties: +- compatible: Must be one of the supported compatible strings: + - "adi,adm1075" for adm1075 + - "adi,adm1272" for adm1272 + - "adi,adm1275" for adm1275 + - "adi,adm1276" for adm1276 + - "adi,adm1278" for adm1278 + - "adi,adm1293" for adm1293 + - "adi,adm1294" for adm1294 +- reg: I2C address + +Optional properties: + +- shunt-resistor-micro-ohms + Shunt resistor value in micro-Ohm + +Example: + +adm1272@10 { + compatible = "adi,adm1272"; + reg = <0x10>; + shunt-resistor-micro-ohms = <500>; +};
adm127x are hot-swap controllers that allow a circuit board to be removed from or inserted into a live backplane. This patch adds the device tree bindings documentation. Signed-off-by: Kun Yi <kunyi@google.com> --- .../devicetree/bindings/hwmon/adm1275.txt | 25 +++++++++++++++++++ 1 file changed, 25 insertions(+) create mode 100644 Documentation/devicetree/bindings/hwmon/adm1275.txt