| Message ID | 20181024221059.21834-1-ivan.khoronzhuk@linaro.org (mailing list archive) |
|---|---|
| Headers | show |
| Series | net: ethernet: ti: cpsw: fix vlan mcast | expand |
From: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Date: Thu, 25 Oct 2018 01:10:55 +0300 > The cpsw holds separate mcast entires for vlan entries. At this moment > driver adds only not vlan mcast addresses, omitting vlan/mcast entries. > As result mcast for vlans doesn't work. It can be fixed by adding same > mcast entries for every created vlan, but this patchseries uses more > sophisticated way and allows to create mcast entries only for vlans > that really require it. Generic functions from this series can be > reused for fixing vlan and macvlan unicast. This is a bug fix but targetted at net-next, and indeed it is quite invasive as it adds new core infrastructure and converts the generic vlan code over to using it. Unfortunately net-next is closed. So if you want this bug fixed in mainline you will have to come up with a less invasive fix, and resubmit this net-next approach when the net-next tree opens back up. Thank you.
Hi David, On 10/25/18 1:34 PM, David Miller wrote: > From: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> > Date: Thu, 25 Oct 2018 01:10:55 +0300 > >> The cpsw holds separate mcast entires for vlan entries. At this moment >> driver adds only not vlan mcast addresses, omitting vlan/mcast entries. >> As result mcast for vlans doesn't work. It can be fixed by adding same >> mcast entries for every created vlan, but this patchseries uses more >> sophisticated way and allows to create mcast entries only for vlans >> that really require it. Generic functions from this series can be >> reused for fixing vlan and macvlan unicast. > > This is a bug fix but targetted at net-next, and indeed it is quite > invasive as it adds new core infrastructure and converts the generic > vlan code over to using it. > > Unfortunately net-next is closed. > > So if you want this bug fixed in mainline you will have to come up > with a less invasive fix, and resubmit this net-next approach when the > net-next tree opens back up. I think it's ok to wait as this issue was always here, so it's not critical.
The cpsw holds separate mcast entires for vlan entries. At this moment driver adds only not vlan mcast addresses, omitting vlan/mcast entries. As result mcast for vlans doesn't work. It can be fixed by adding same mcast entries for every created vlan, but this patchseries uses more sophisticated way and allows to create mcast entries only for vlans that really require it. Generic functions from this series can be reused for fixing vlan and macvlan unicast. Simple example of ALE table before and after this series, having same mcast entries as for vlan 100 as for real device (reserved vlan 2), and one mcast address only for vlan 100 - 01:1b:19:00:00:00. <---- Before this patchset ----> vlan , vid = 2, untag_force = 0x5, reg_mcast = 0x5, mem_list = 0x5 mcast, vid = 2, addr = ff:ff:ff:ff:ff:ff, port_mask = 0x1 ucast, vid = 2, addr = 74:da:ea:47:7d:9d, persistant, port_num = 0x0 vlan , vid = 0, untag_force = 0x7, reg_mcast = 0x0, mem_list = 0x7 mcast, vid = 2, addr = 33:33:00:00:00:01, port_mask = 0x1 mcast, vid = 2, addr = 01:00:5e:00:00:01, port_mask = 0x1 vlan , vid = 1, untag_force = 0x3, reg_mcast = 0x3, mem_list = 0x3 mcast, vid = 1, addr = ff:ff:ff:ff:ff:ff, port_mask = 0x1 ucast, vid = 1, addr = 74:da:ea:47:7d:9c, persistant, port_num = 0x0 mcast, vid = 1, addr = 33:33:00:00:00:01, port_mask = 0x1 mcast, vid = 1, addr = 01:00:5e:00:00:01, port_mask = 0x1 mcast, vid = 2, addr = 01:80:c2:00:00:00, port_mask = 0x1 mcast, vid = 2, addr = 01:80:c2:00:00:03, port_mask = 0x1 mcast, vid = 2, addr = 01:80:c2:00:00:0e, port_mask = 0x1 mcast, vid = 1, addr = 01:80:c2:00:00:00, port_mask = 0x1 mcast, vid = 1, addr = 01:80:c2:00:00:03, port_mask = 0x1 mcast, vid = 1, addr = 01:80:c2:00:00:0e, port_mask = 0x1 mcast, vid = 2, addr = 33:33:ff:47:7d:9d, port_mask = 0x1 mcast, vid = 2, addr = 33:33:00:00:00:fb, port_mask = 0x1 mcast, vid = 2, addr = 33:33:00:01:00:03, port_mask = 0x1 mcast, vid = 1, addr = 33:33:ff:47:7d:9c, port_mask = 0x1 mcast, vid = 1, addr = 33:33:00:00:00:fb, port_mask = 0x1 mcast, vid = 1, addr = 33:33:00:01:00:03, port_mask = 0x1 mcast, vid = 1, addr = 01:00:5e:00:00:fb, port_mask = 0x1 mcast, vid = 1, addr = 01:00:5e:00:00:fc, port_mask = 0x1 vlan , vid = 100, untag_force = 0x0, reg_mcast = 0x5, mem_list = 0x5 ucast, vid = 100, addr = 74:da:ea:47:7d:9d, persistant, port_num = 0x0 mcast, vid = 100, addr = ff:ff:ff:ff:ff:ff, port_mask = 0x1 mcast, vid = 2, addr = 01:1b:19:00:00:00, port_mask = 0x1 ^^^ Here mcast entry (ptpl2), has to be added only for vlan 100 but added for reserved vlan 2...that's not enough. <---- After this patchset ----> vlan , vid = 2, untag_force = 0x5, reg_mcast = 0x5, mem_list = 0x5 mcast, vid = 2, addr = ff:ff:ff:ff:ff:ff, port_mask = 0x1 ucast, vid = 2, addr = 74:da:ea:47:7d:9d, persistant, port_num = 0x0 vlan , vid = 0, untag_force = 0x7, reg_mcast = 0x0, mem_list = 0x7 mcast, vid = 2, addr = 33:33:00:00:00:01, port_mask = 0x1 mcast, vid = 2, addr = 01:00:5e:00:00:01, port_mask = 0x1 vlan , vid = 1, untag_force = 0x3, reg_mcast = 0x3, mem_list = 0x3 mcast, vid = 1, addr = ff:ff:ff:ff:ff:ff, port_mask = 0x1 ucast, vid = 1, addr = 74:da:ea:47:7d:9c, persistant, port_num = 0x0 mcast, vid = 1, addr = 33:33:00:00:00:01, port_mask = 0x1 mcast, vid = 1, addr = 01:00:5e:00:00:01, port_mask = 0x1 mcast, vid = 2, addr = 01:80:c2:00:00:00, port_mask = 0x1 mcast, vid = 2, addr = 01:80:c2:00:00:03, port_mask = 0x1 mcast, vid = 2, addr = 01:80:c2:00:00:0e, port_mask = 0x1 mcast, vid = 1, addr = 01:80:c2:00:00:00, port_mask = 0x1 mcast, vid = 1, addr = 01:80:c2:00:00:03, port_mask = 0x1 mcast, vid = 1, addr = 01:80:c2:00:00:0e, port_mask = 0x1 mcast, vid = 2, addr = 33:33:ff:47:7d:9d, port_mask = 0x1 mcast, vid = 1, addr = 33:33:ff:47:7d:9c, port_mask = 0x1 mcast, vid = 2, addr = 33:33:00:00:00:fb, port_mask = 0x1 mcast, vid = 2, addr = 33:33:00:01:00:03, port_mask = 0x1 mcast, vid = 1, addr = 33:33:00:00:00:fb, port_mask = 0x1 mcast, vid = 1, addr = 33:33:00:01:00:03, port_mask = 0x1 vlan , vid = 100, untag_force = 0x0, reg_mcast = 0x5, mem_list = 0x5 ucast, vid = 100, addr = 74:da:ea:47:7d:9d, persistant, port_num = 0x0 mcast, vid = 100, addr = ff:ff:ff:ff:ff:ff, port_mask = 0x1 mcast, vid = 100, addr = 33:33:00:00:00:01, port_mask = 0x1 mcast, vid = 100, addr = 01:00:5e:00:00:01, port_mask = 0x1 mcast, vid = 100, addr = 33:33:ff:47:7d:9d, port_mask = 0x1 mcast, vid = 100, addr = 01:80:c2:00:00:00, port_mask = 0x1 mcast, vid = 100, addr = 01:80:c2:00:00:03, port_mask = 0x1 mcast, vid = 100, addr = 01:80:c2:00:00:0e, port_mask = 0x1 mcast, vid = 100, addr = 33:33:00:00:00:fb, port_mask = 0x1 mcast, vid = 100, addr = 33:33:00:01:00:03, port_mask = 0x1 mcast, vid = 100, addr = 01:1b:19:00:00:00, port_mask = 0x1 ^^^ Here mcast entry (ptpl2), is added only for vlan 100 as it should be. Based on net-next/master Ivan Khoronzhuk (4): net: core: dev_addr_lists: add auxiliary func to handle reference address updates net: 8021q: vlan_core: allow use list of vlans for real device net: ethernet: ti: cpsw: fix vlan mcast net: ethernet: ti: cpsw: fix vlan configuration while down/up drivers/net/ethernet/ti/cpsw.c | 212 ++++++++++++++++++++++++++++----- include/linux/if_vlan.h | 11 ++ include/linux/netdevice.h | 10 ++ net/8021q/vlan_core.c | 27 +++++ net/core/dev_addr_lists.c | 97 +++++++++++++++ 5 files changed, 326 insertions(+), 31 deletions(-)