Message ID | 20181105154529.7614-18-vkoul@kernel.org (mailing list archive) |
---|---|
State | Not Applicable, archived |
Delegated to: | Andy Gross |
Headers | show |
Series | arm64: dts: qcom: qcs404: Add Device tree nodes | expand |
On Mon 05 Nov 07:45 PST 2018, Vinod Koul wrote: > PMS405 also features PON block, so add PON and PWRKEY nodes > > Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Regards, Bjorn > --- > arch/arm64/boot/dts/qcom/pms405.dtsi | 16 ++++++++++++++++ > 1 file changed, 16 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/pms405.dtsi b/arch/arm64/boot/dts/qcom/pms405.dtsi > index 18410d9f0f8f..2c7cc1e94ff4 100644 > --- a/arch/arm64/boot/dts/qcom/pms405.dtsi > +++ b/arch/arm64/boot/dts/qcom/pms405.dtsi > @@ -2,6 +2,7 @@ > // Copyright (c) 2018, Linaro Limited > > #include <dt-bindings/spmi/spmi.h> > +#include <dt-bindings/input/linux-event-codes.h> > > &spmi_bus { > > @@ -18,6 +19,21 @@ > interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; > }; > > + pon@800 { > + compatible = "qcom,pms405-pon"; > + reg = <0x800>; > + mode-bootloader = <0x2>; > + mode-recovery = <0x1>; > + > + pwrkey { > + compatible = "qcom,pm8941-pwrkey"; > + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; > + debounce = <15625>; > + bias-pull-up; > + linux,code = <KEY_POWER>; > + }; > + }; > + > pms405_gpios: gpios@c000 { > compatible = "qcom,pms405-gpio"; > reg = <0xc000>; > -- > 2.14.4 >
diff --git a/arch/arm64/boot/dts/qcom/pms405.dtsi b/arch/arm64/boot/dts/qcom/pms405.dtsi index 18410d9f0f8f..2c7cc1e94ff4 100644 --- a/arch/arm64/boot/dts/qcom/pms405.dtsi +++ b/arch/arm64/boot/dts/qcom/pms405.dtsi @@ -2,6 +2,7 @@ // Copyright (c) 2018, Linaro Limited #include <dt-bindings/spmi/spmi.h> +#include <dt-bindings/input/linux-event-codes.h> &spmi_bus { @@ -18,6 +19,21 @@ interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; }; + pon@800 { + compatible = "qcom,pms405-pon"; + reg = <0x800>; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; + + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_POWER>; + }; + }; + pms405_gpios: gpios@c000 { compatible = "qcom,pms405-gpio"; reg = <0xc000>;
PMS405 also features PON block, so add PON and PWRKEY nodes Signed-off-by: Vinod Koul <vkoul@kernel.org> --- arch/arm64/boot/dts/qcom/pms405.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)