| Message ID | 20181108053957.205681-5-sdf@google.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | bpftool: support loading flow dissector | expand |
Hi Stanislav, thanks for the changes! More comments below. 2018-11-07 21:39 UTC-0800 ~ Stanislav Fomichev <sdf@google.com> > This commit adds support for loading/attaching/detaching flow > dissector program. The structure of the flow dissector program is > assumed to be the same as in the selftests: > > * flow_dissector section with the main entry point > * a bunch of tail call progs > * a jmp_table map that is populated with the tail call progs > > When `bpftool load` is called with a flow_dissector prog (i.e. when the > first section is flow_dissector of 'type flow_dissector' argument is > passed), we load and pin all the programs/maps. User is responsible to > construct the jump table for the tail calls. > > The last argument of `bpftool attach` is made optional for this use > case. > > Example: > bpftool prog load tools/testing/selftests/bpf/bpf_flow.o \ > /sys/fs/bpf/flow type flow_dissector > > bpftool map update pinned /sys/fs/bpf/flow/jmp_table \ > key 0 0 0 0 \ > value pinned /sys/fs/bpf/flow/IP > > bpftool map update pinned /sys/fs/bpf/flow/jmp_table \ > key 1 0 0 0 \ > value pinned /sys/fs/bpf/flow/IPV6 > > bpftool map update pinned /sys/fs/bpf/flow/jmp_table \ > key 2 0 0 0 \ > value pinned /sys/fs/bpf/flow/IPV6OP > > bpftool map update pinned /sys/fs/bpf/flow/jmp_table \ > key 3 0 0 0 \ > value pinned /sys/fs/bpf/flow/IPV6FR > > bpftool map update pinned /sys/fs/bpf/flow/jmp_table \ > key 4 0 0 0 \ > value pinned /sys/fs/bpf/flow/MPLS > > bpftool map update pinned /sys/fs/bpf/flow/jmp_table \ > key 5 0 0 0 \ > value pinned /sys/fs/bpf/flow/VLAN > > bpftool prog attach pinned /sys/fs/bpf/flow/flow_dissector flow_dissector > > Tested by using the above lines to load the prog in > the test_flow_dissector.sh selftest. > > Signed-off-by: Stanislav Fomichev <sdf@google.com> > --- > .../bpftool/Documentation/bpftool-prog.rst | 36 ++++-- > tools/bpf/bpftool/bash-completion/bpftool | 6 +- > tools/bpf/bpftool/common.c | 30 ++--- > tools/bpf/bpftool/main.h | 1 + > tools/bpf/bpftool/prog.c | 112 +++++++++++++----- > 5 files changed, 126 insertions(+), 59 deletions(-) > > diff --git a/tools/bpf/bpftool/Documentation/bpftool-prog.rst b/tools/bpf/bpftool/Documentation/bpftool-prog.rst > index ac4e904b10fb..0374634c3087 100644 > --- a/tools/bpf/bpftool/Documentation/bpftool-prog.rst > +++ b/tools/bpf/bpftool/Documentation/bpftool-prog.rst > @@ -15,7 +15,8 @@ SYNOPSIS > *OPTIONS* := { { **-j** | **--json** } [{ **-p** | **--pretty** }] | { **-f** | **--bpffs** } } > > *COMMANDS* := > - { **show** | **list** | **dump xlated** | **dump jited** | **pin** | **load** | **help** } > + { **show** | **list** | **dump xlated** | **dump jited** | **pin** | **load** > + | **loadall** | **help** } > > MAP COMMANDS > ============= > @@ -24,9 +25,9 @@ MAP COMMANDS > | **bpftool** **prog dump xlated** *PROG* [{**file** *FILE* | **opcodes** | **visual**}] > | **bpftool** **prog dump jited** *PROG* [{**file** *FILE* | **opcodes**}] > | **bpftool** **prog pin** *PROG* *FILE* > -| **bpftool** **prog load** *OBJ* *FILE* [**type** *TYPE*] [**map** {**idx** *IDX* | **name** *NAME*} *MAP*] [**dev** *NAME*] > -| **bpftool** **prog attach** *PROG* *ATTACH_TYPE* *MAP* > -| **bpftool** **prog detach** *PROG* *ATTACH_TYPE* *MAP* > +| **bpftool** **prog { load | loadall }** *OBJ* *FILE* [**type** *TYPE*] [**map** {**idx** *IDX* | **name** *NAME*} *MAP*] [**dev** *NAME*] > +| **bpftool** **prog attach** *PROG* *ATTACH_TYPE* [*MAP*] > +| **bpftool** **prog detach** *PROG* *ATTACH_TYPE* [*MAP*] > | **bpftool** **prog help** > | > | *MAP* := { **id** *MAP_ID* | **pinned** *FILE* } > @@ -39,7 +40,9 @@ MAP COMMANDS > | **cgroup/bind4** | **cgroup/bind6** | **cgroup/post_bind4** | **cgroup/post_bind6** | > | **cgroup/connect4** | **cgroup/connect6** | **cgroup/sendmsg4** | **cgroup/sendmsg6** > | } > -| *ATTACH_TYPE* := { **msg_verdict** | **skb_verdict** | **skb_parse** } > +| *ATTACH_TYPE* := { > +| **msg_verdict** | **skb_verdict** | **skb_parse** | **flow_dissector** > +| } > > > DESCRIPTION > @@ -79,8 +82,11 @@ DESCRIPTION > contain a dot character ('.'), which is reserved for future > extensions of *bpffs*. > > - **bpftool prog load** *OBJ* *FILE* [**type** *TYPE*] [**map** {**idx** *IDX* | **name** *NAME*} *MAP*] [**dev** *NAME*] > + **bpftool prog { load | loadall }** *OBJ* *FILE* [**type** *TYPE*] [**map** {**idx** *IDX* | **name** *NAME*} *MAP*] [**dev** *NAME*] > Load bpf program from binary *OBJ* and pin as *FILE*. > + **bpftool prog load** will pin only the first bpf program > + from the *OBJ*, **bpftool prog loadall** will pin all maps > + and programs from the *OBJ*. This could be improved regarding maps: with "bpftool prog load" I think we also load and pin all maps, but your description implies this is only the case with "loadall" > **type** is optional, if not specified program type will be > inferred from section names. > By default bpftool will create new maps as declared in the ELF > @@ -97,13 +103,17 @@ DESCRIPTION > contain a dot character ('.'), which is reserved for future > extensions of *bpffs*. > > - **bpftool prog attach** *PROG* *ATTACH_TYPE* *MAP* > - Attach bpf program *PROG* (with type specified by *ATTACH_TYPE*) > - to the map *MAP*. > - > - **bpftool prog detach** *PROG* *ATTACH_TYPE* *MAP* > - Detach bpf program *PROG* (with type specified by *ATTACH_TYPE*) > - from the map *MAP*. > + **bpftool prog attach** *PROG* *ATTACH_TYPE* [*MAP*] > + Attach bpf program *PROG* (with type specified by > + *ATTACH_TYPE*). Most *ATTACH_TYPEs* require a *MAP* > + parameter, with the exception of *flow_dissector* which is > + attached to current networking name space. > + > + **bpftool prog detach** *PROG* *ATTACH_TYPE* [*MAP*] > + Detach bpf program *PROG* (with type specified by > + *ATTACH_TYPE*). Most *ATTACH_TYPEs* require a *MAP* > + parameter, with the exception of *flow_dissector* which is > + detached from the current networking name space. While at it could you please fix those two paragraphs to use tabs for indentation, as the rest of the doc? Thanks! > > **bpftool prog help** > Print short help message. > diff --git a/tools/bpf/bpftool/bash-completion/bpftool b/tools/bpf/bpftool/bash-completion/bpftool > index 3f78e6404589..ad0fc919f7ec 100644 > --- a/tools/bpf/bpftool/bash-completion/bpftool > +++ b/tools/bpf/bpftool/bash-completion/bpftool > @@ -243,7 +243,7 @@ _bpftool() > # Completion depends on object and command in use > case $object in > prog) > - if [[ $command != "load" ]]; then > + if [[ $command != "load" && $command != "loadall" ]]; then > case $prev in > id) > _bpftool_get_prog_ids > @@ -299,7 +299,7 @@ _bpftool() > fi > > if [[ ${#words[@]} == 6 ]]; then > - COMPREPLY=( $( compgen -W "msg_verdict skb_verdict skb_parse" -- "$cur" ) ) > + COMPREPLY=( $( compgen -W "msg_verdict skb_verdict skb_parse flow_dissector" -- "$cur" ) ) > return 0 > fi > > @@ -309,7 +309,7 @@ _bpftool() > fi > return 0 > ;; > - load) > + load|loadall) > local obj > > if [[ ${#words[@]} -lt 6 ]]; then You also want to update completion for the program types, at line 341 or so. Feel free to split that list on several lines, by the way :). > diff --git a/tools/bpf/bpftool/common.c b/tools/bpf/bpftool/common.c > index 25af85304ebe..f671a921dec5 100644 > --- a/tools/bpf/bpftool/common.c > +++ b/tools/bpf/bpftool/common.c > @@ -169,34 +169,24 @@ int open_obj_pinned_any(char *path, enum bpf_obj_type exp_type) > return fd; > } > > -int do_pin_fd(int fd, const char *name) > +int mount_bpffs_for_pin(const char *name) > { > char err_str[ERR_MAX_LEN]; > char *file; > char *dir; > int err = 0; > > - err = bpf_obj_pin(fd, name); > - if (!err) > - goto out; > - > file = malloc(strlen(name) + 1); > strcpy(file, name); > dir = dirname(file); > > - if (errno != EPERM || is_bpffs(dir)) { > - p_err("can't pin the object (%s): %s", name, strerror(errno)); > + if (is_bpffs(dir)) { > + /* nothing to do if already mounted */ > goto out_free; > } Nitpick: unnecessary brackets. > > - /* Attempt to mount bpffs, then retry pinning. */ > err = mnt_bpffs(dir, err_str, ERR_MAX_LEN); > - if (!err) { > - err = bpf_obj_pin(fd, name); > - if (err) > - p_err("can't pin the object (%s): %s", name, > - strerror(errno)); > - } else { > + if (err) { > err_str[ERR_MAX_LEN - 1] = '\0'; > p_err("can't mount BPF file system to pin the object (%s): %s", > name, err_str); > @@ -204,10 +194,20 @@ int do_pin_fd(int fd, const char *name) > > out_free: > free(file); > -out: > return err; > } > > +int do_pin_fd(int fd, const char *name) > +{ > + int err; > + > + err = mount_bpffs_for_pin(name); > + if (err) > + return err; > + > + return bpf_obj_pin(fd, name); > +} > + > int do_pin_any(int argc, char **argv, int (*get_fd_by_id)(__u32)) > { > unsigned int id; > diff --git a/tools/bpf/bpftool/main.h b/tools/bpf/bpftool/main.h > index 28322ace2856..1383824c9baf 100644 > --- a/tools/bpf/bpftool/main.h > +++ b/tools/bpf/bpftool/main.h > @@ -129,6 +129,7 @@ const char *get_fd_type_name(enum bpf_obj_type type); > char *get_fdinfo(int fd, const char *key); > int open_obj_pinned(char *path); > int open_obj_pinned_any(char *path, enum bpf_obj_type exp_type); > +int mount_bpffs_for_pin(const char *name); > int do_pin_any(int argc, char **argv, int (*get_fd_by_id)(__u32)); > int do_pin_fd(int fd, const char *name); > > diff --git a/tools/bpf/bpftool/prog.c b/tools/bpf/bpftool/prog.c > index 5302ee282409..a4346dd673b1 100644 > --- a/tools/bpf/bpftool/prog.c > +++ b/tools/bpf/bpftool/prog.c > @@ -81,6 +81,7 @@ static const char * const attach_type_strings[] = { > [BPF_SK_SKB_STREAM_PARSER] = "stream_parser", > [BPF_SK_SKB_STREAM_VERDICT] = "stream_verdict", > [BPF_SK_MSG_VERDICT] = "msg_verdict", > + [BPF_FLOW_DISSECTOR] = "flow_dissector", > [__MAX_BPF_ATTACH_TYPE] = NULL, > }; > > @@ -724,10 +725,11 @@ int map_replace_compar(const void *p1, const void *p2) > static int do_attach(int argc, char **argv) > { > enum bpf_attach_type attach_type; > - int err, mapfd, progfd; > + int err, progfd; > + int mapfd = 0; > > - if (!REQ_ARGS(5)) { > - p_err("too few parameters for map attach"); > + if (!REQ_ARGS(3)) { > + p_err("too few parameters for attach"); > return -EINVAL; > } > > @@ -740,11 +742,17 @@ static int do_attach(int argc, char **argv) > p_err("invalid attach type"); > return -EINVAL; > } > - NEXT_ARG(); > + if (attach_type != BPF_FLOW_DISSECTOR) { > + NEXT_ARG(); > + if (!REQ_ARGS(2)) { > + p_err("too few parameters for map attach"); > + return -EINVAL; > + } > > - mapfd = map_parse_fd(&argc, &argv); > - if (mapfd < 0) > - return mapfd; > + mapfd = map_parse_fd(&argc, &argv); > + if (mapfd < 0) > + return mapfd; > + } > > err = bpf_prog_attach(progfd, mapfd, attach_type, 0); > if (err) { > @@ -760,10 +768,11 @@ static int do_attach(int argc, char **argv) > static int do_detach(int argc, char **argv) > { > enum bpf_attach_type attach_type; > - int err, mapfd, progfd; > + int err, progfd; > + int mapfd = 0; > > - if (!REQ_ARGS(5)) { > - p_err("too few parameters for map detach"); > + if (!REQ_ARGS(3)) { > + p_err("too few parameters for detach"); > return -EINVAL; > } > > @@ -776,11 +785,17 @@ static int do_detach(int argc, char **argv) > p_err("invalid attach type"); > return -EINVAL; > } > - NEXT_ARG(); > + if (attach_type != BPF_FLOW_DISSECTOR) { > + NEXT_ARG(); > + if (!REQ_ARGS(2)) { > + p_err("too few parameters for map detach"); > + return -EINVAL; > + } Would that make sense to factor argument checks or parsing for do_attach() and do_detach() to some extent? In order to reduce the number of attach-type-based exceptions to add in the code if we have other attach types that do not take maps in the future. > > - mapfd = map_parse_fd(&argc, &argv); > - if (mapfd < 0) > - return mapfd; > + mapfd = map_parse_fd(&argc, &argv); > + if (mapfd < 0) > + return mapfd; > + } > > err = bpf_prog_detach2(progfd, mapfd, attach_type); > if (err) { > @@ -792,15 +807,16 @@ static int do_detach(int argc, char **argv) > jsonw_null(json_wtr); > return 0; > } > -static int do_load(int argc, char **argv) > + > +static int load_with_options(int argc, char **argv, bool first_prog_only) > { > enum bpf_attach_type expected_attach_type; > struct bpf_object_open_attr attr = { > .prog_type = BPF_PROG_TYPE_UNSPEC, > }; > struct map_replace *map_replace = NULL; > + struct bpf_program *prog = NULL, *pos; > unsigned int old_map_fds = 0; > - struct bpf_program *prog; > struct bpf_object *obj; > struct bpf_map *map; > const char *pinfile; > @@ -918,14 +934,20 @@ static int do_load(int argc, char **argv) > goto err_free_reuse_maps; > } > > - prog = bpf_program__next(NULL, obj); > - if (!prog) { > - p_err("object file doesn't contain any bpf program"); > - goto err_close_obj; > + if (first_prog_only) { > + prog = bpf_program__next(NULL, obj); > + if (!prog) { > + p_err("object file doesn't contain any bpf program"); > + goto err_close_obj; > + } > } > > - bpf_program__set_ifindex(prog, ifindex); > if (attr.prog_type == BPF_PROG_TYPE_UNSPEC) { > + if (!prog) { > + p_err("can not guess program type when loading all programs\n"); > + goto err_close_obj; > + } > + > const char *sec_name = bpf_program__title(prog, false); > > err = libbpf_prog_type_by_name(sec_name, &attr.prog_type, > @@ -936,8 +958,13 @@ static int do_load(int argc, char **argv) > goto err_close_obj; > } > } > - bpf_program__set_type(prog, attr.prog_type); > - bpf_program__set_expected_attach_type(prog, expected_attach_type); > + > + bpf_object__for_each_program(pos, obj) { > + bpf_program__set_ifindex(pos, ifindex); > + bpf_program__set_type(pos, attr.prog_type); > + bpf_program__set_expected_attach_type(pos, > + expected_attach_type); > + } I still believe you can have programs of different types here, and be able to load them. I tried it and managed to have it working fine. If no type is provided from command line we can retrieve types for each program from its section name. If a type is provided on the command line, we can do the same, but I am not sure we should do it, or impose that type for all programs instead. > > qsort(map_replace, old_map_fds, sizeof(*map_replace), > map_replace_compar); > @@ -1001,9 +1028,25 @@ static int do_load(int argc, char **argv) > goto err_close_obj; > } > > - if (do_pin_fd(bpf_program__fd(prog), pinfile)) > + err = mount_bpffs_for_pin(pinfile); > + if (err) > goto err_close_obj; > > + if (prog) { Nit: Maybe "if (first_prog_only) {" instead? If I understand correctly, at this stage it should be equivalent, but in my opinion it would make it easier to understand why we have two cases here. > + err = bpf_obj_pin(bpf_program__fd(prog), pinfile); > + if (err) { > + p_err("failed to pin program %s", > + bpf_program__title(prog, false)); > + goto err_close_obj; > + } > + } else { > + err = bpf_object__pin(obj, pinfile); > + if (err) { > + p_err("failed to pin all programs"); > + goto err_close_obj; > + } > + } > + > if (json_output) > jsonw_null(json_wtr); > > @@ -1023,6 +1066,16 @@ static int do_load(int argc, char **argv) > return -1; > } > > +static int do_load(int argc, char **argv) > +{ > + return load_with_options(argc, argv, true); > +} > + > +static int do_loadall(int argc, char **argv) > +{ > + return load_with_options(argc, argv, false); > +} > + > static int do_help(int argc, char **argv) > { > if (json_output) { > @@ -1035,10 +1088,11 @@ static int do_help(int argc, char **argv) > " %s %s dump xlated PROG [{ file FILE | opcodes | visual }]\n" > " %s %s dump jited PROG [{ file FILE | opcodes }]\n" > " %s %s pin PROG FILE\n" > - " %s %s load OBJ FILE [type TYPE] [dev NAME] \\\n" > + " %s %s { load | loadall } OBJ FILE \\\n" > + " [type TYPE] [dev NAME] \\\n" > " [map { idx IDX | name NAME } MAP]\n" > - " %s %s attach PROG ATTACH_TYPE MAP\n" > - " %s %s detach PROG ATTACH_TYPE MAP\n" > + " %s %s attach PROG ATTACH_TYPE [MAP]\n" > + " %s %s detach PROG ATTACH_TYPE [MAP]\n" > " %s %s help\n" > "\n" > " " HELP_SPEC_MAP "\n" > @@ -1050,7 +1104,8 @@ static int do_help(int argc, char **argv) > " cgroup/bind4 | cgroup/bind6 | cgroup/post_bind4 |\n" > " cgroup/post_bind6 | cgroup/connect4 | cgroup/connect6 |\n" > " cgroup/sendmsg4 | cgroup/sendmsg6 }\n" > - " ATTACH_TYPE := { msg_verdict | skb_verdict | skb_parse }\n" > + " ATTACH_TYPE := { msg_verdict | skb_verdict | skb_parse |\n" > + " flow_dissector }\n" > " " HELP_SPEC_OPTIONS "\n" > "", > bin_name, argv[-2], bin_name, argv[-2], bin_name, argv[-2], > @@ -1067,6 +1122,7 @@ static const struct cmd cmds[] = { > { "dump", do_dump }, > { "pin", do_pin }, > { "load", do_load }, > + { "loadall", do_loadall }, > { "attach", do_attach }, > { "detach", do_detach }, > { 0 } >
On 11/08, Quentin Monnet wrote: > Hi Stanislav, thanks for the changes! More comments below. Thank you for another round of review! > 2018-11-07 21:39 UTC-0800 ~ Stanislav Fomichev <sdf@google.com> > > This commit adds support for loading/attaching/detaching flow > > dissector program. The structure of the flow dissector program is > > assumed to be the same as in the selftests: > > > > * flow_dissector section with the main entry point > > * a bunch of tail call progs > > * a jmp_table map that is populated with the tail call progs > > > > When `bpftool load` is called with a flow_dissector prog (i.e. when the > > first section is flow_dissector of 'type flow_dissector' argument is > > passed), we load and pin all the programs/maps. User is responsible to > > construct the jump table for the tail calls. > > > > The last argument of `bpftool attach` is made optional for this use > > case. > > > > Example: > > bpftool prog load tools/testing/selftests/bpf/bpf_flow.o \ > > /sys/fs/bpf/flow type flow_dissector > > > > bpftool map update pinned /sys/fs/bpf/flow/jmp_table \ > > key 0 0 0 0 \ > > value pinned /sys/fs/bpf/flow/IP > > > > bpftool map update pinned /sys/fs/bpf/flow/jmp_table \ > > key 1 0 0 0 \ > > value pinned /sys/fs/bpf/flow/IPV6 > > > > bpftool map update pinned /sys/fs/bpf/flow/jmp_table \ > > key 2 0 0 0 \ > > value pinned /sys/fs/bpf/flow/IPV6OP > > > > bpftool map update pinned /sys/fs/bpf/flow/jmp_table \ > > key 3 0 0 0 \ > > value pinned /sys/fs/bpf/flow/IPV6FR > > > > bpftool map update pinned /sys/fs/bpf/flow/jmp_table \ > > key 4 0 0 0 \ > > value pinned /sys/fs/bpf/flow/MPLS > > > > bpftool map update pinned /sys/fs/bpf/flow/jmp_table \ > > key 5 0 0 0 \ > > value pinned /sys/fs/bpf/flow/VLAN > > > > bpftool prog attach pinned /sys/fs/bpf/flow/flow_dissector flow_dissector > > > > Tested by using the above lines to load the prog in > > the test_flow_dissector.sh selftest. > > > > Signed-off-by: Stanislav Fomichev <sdf@google.com> > > --- > > .../bpftool/Documentation/bpftool-prog.rst | 36 ++++-- > > tools/bpf/bpftool/bash-completion/bpftool | 6 +- > > tools/bpf/bpftool/common.c | 30 ++--- > > tools/bpf/bpftool/main.h | 1 + > > tools/bpf/bpftool/prog.c | 112 +++++++++++++----- > > 5 files changed, 126 insertions(+), 59 deletions(-) > > > > diff --git a/tools/bpf/bpftool/Documentation/bpftool-prog.rst b/tools/bpf/bpftool/Documentation/bpftool-prog.rst > > index ac4e904b10fb..0374634c3087 100644 > > --- a/tools/bpf/bpftool/Documentation/bpftool-prog.rst > > +++ b/tools/bpf/bpftool/Documentation/bpftool-prog.rst > > @@ -15,7 +15,8 @@ SYNOPSIS > > *OPTIONS* := { { **-j** | **--json** } [{ **-p** | **--pretty** }] | { **-f** | **--bpffs** } } > > *COMMANDS* := > > - { **show** | **list** | **dump xlated** | **dump jited** | **pin** | **load** | **help** } > > + { **show** | **list** | **dump xlated** | **dump jited** | **pin** | **load** > > + | **loadall** | **help** } > > MAP COMMANDS > > ============= > > @@ -24,9 +25,9 @@ MAP COMMANDS > > | **bpftool** **prog dump xlated** *PROG* [{**file** *FILE* | **opcodes** | **visual**}] > > | **bpftool** **prog dump jited** *PROG* [{**file** *FILE* | **opcodes**}] > > | **bpftool** **prog pin** *PROG* *FILE* > > -| **bpftool** **prog load** *OBJ* *FILE* [**type** *TYPE*] [**map** {**idx** *IDX* | **name** *NAME*} *MAP*] [**dev** *NAME*] > > -| **bpftool** **prog attach** *PROG* *ATTACH_TYPE* *MAP* > > -| **bpftool** **prog detach** *PROG* *ATTACH_TYPE* *MAP* > > +| **bpftool** **prog { load | loadall }** *OBJ* *FILE* [**type** *TYPE*] [**map** {**idx** *IDX* | **name** *NAME*} *MAP*] [**dev** *NAME*] > > +| **bpftool** **prog attach** *PROG* *ATTACH_TYPE* [*MAP*] > > +| **bpftool** **prog detach** *PROG* *ATTACH_TYPE* [*MAP*] > > | **bpftool** **prog help** > > | > > | *MAP* := { **id** *MAP_ID* | **pinned** *FILE* } > > @@ -39,7 +40,9 @@ MAP COMMANDS > > | **cgroup/bind4** | **cgroup/bind6** | **cgroup/post_bind4** | **cgroup/post_bind6** | > > | **cgroup/connect4** | **cgroup/connect6** | **cgroup/sendmsg4** | **cgroup/sendmsg6** > > | } > > -| *ATTACH_TYPE* := { **msg_verdict** | **skb_verdict** | **skb_parse** } > > +| *ATTACH_TYPE* := { > > +| **msg_verdict** | **skb_verdict** | **skb_parse** | **flow_dissector** > > +| } > > DESCRIPTION > > @@ -79,8 +82,11 @@ DESCRIPTION > > contain a dot character ('.'), which is reserved for future > > extensions of *bpffs*. > > - **bpftool prog load** *OBJ* *FILE* [**type** *TYPE*] [**map** {**idx** *IDX* | **name** *NAME*} *MAP*] [**dev** *NAME*] > > + **bpftool prog { load | loadall }** *OBJ* *FILE* [**type** *TYPE*] [**map** {**idx** *IDX* | **name** *NAME*} *MAP*] [**dev** *NAME*] > > Load bpf program from binary *OBJ* and pin as *FILE*. > > + **bpftool prog load** will pin only the first bpf program > > + from the *OBJ*, **bpftool prog loadall** will pin all maps > > + and programs from the *OBJ*. > > This could be improved regarding maps: with "bpftool prog load" I think we > also load and pin all maps, but your description implies this is only the > case with "loadall" I don't think we pin any maps with `bpftool prog load`, we certainly load them, but we don't pin any afaict. Can you point me to the code where we pin the maps? > > **type** is optional, if not specified program type will be > > inferred from section names. > > By default bpftool will create new maps as declared in the ELF > > @@ -97,13 +103,17 @@ DESCRIPTION > > contain a dot character ('.'), which is reserved for future > > extensions of *bpffs*. > > - **bpftool prog attach** *PROG* *ATTACH_TYPE* *MAP* > > - Attach bpf program *PROG* (with type specified by *ATTACH_TYPE*) > > - to the map *MAP*. > > - > > - **bpftool prog detach** *PROG* *ATTACH_TYPE* *MAP* > > - Detach bpf program *PROG* (with type specified by *ATTACH_TYPE*) > > - from the map *MAP*. > > + **bpftool prog attach** *PROG* *ATTACH_TYPE* [*MAP*] > > + Attach bpf program *PROG* (with type specified by > > + *ATTACH_TYPE*). Most *ATTACH_TYPEs* require a *MAP* > > + parameter, with the exception of *flow_dissector* which is > > + attached to current networking name space. > > + > > + **bpftool prog detach** *PROG* *ATTACH_TYPE* [*MAP*] > > + Detach bpf program *PROG* (with type specified by > > + *ATTACH_TYPE*). Most *ATTACH_TYPEs* require a *MAP* > > + parameter, with the exception of *flow_dissector* which is > > + detached from the current networking name space. > > While at it could you please fix those two paragraphs to use tabs for > indentation, as the rest of the doc? Thanks! Time to teach my vim to use tabs in .rst files. Sorry about that. > > **bpftool prog help** > > Print short help message. > > diff --git a/tools/bpf/bpftool/bash-completion/bpftool b/tools/bpf/bpftool/bash-completion/bpftool > > index 3f78e6404589..ad0fc919f7ec 100644 > > --- a/tools/bpf/bpftool/bash-completion/bpftool > > +++ b/tools/bpf/bpftool/bash-completion/bpftool > > @@ -243,7 +243,7 @@ _bpftool() > > # Completion depends on object and command in use > > case $object in > > prog) > > - if [[ $command != "load" ]]; then > > + if [[ $command != "load" && $command != "loadall" ]]; then > > case $prev in > > id) > > _bpftool_get_prog_ids > > @@ -299,7 +299,7 @@ _bpftool() > > fi > > if [[ ${#words[@]} == 6 ]]; then > > - COMPREPLY=( $( compgen -W "msg_verdict skb_verdict skb_parse" -- "$cur" ) ) > > + COMPREPLY=( $( compgen -W "msg_verdict skb_verdict skb_parse flow_dissector" -- "$cur" ) ) > > return 0 > > fi > > @@ -309,7 +309,7 @@ _bpftool() > > fi > > return 0 > > ;; > > - load) > > + load|loadall) > > local obj > > if [[ ${#words[@]} -lt 6 ]]; then > > You also want to update completion for the program types, at line 341 or so. > Feel free to split that list on several lines, by the way :). Will do, thanks! > > diff --git a/tools/bpf/bpftool/common.c b/tools/bpf/bpftool/common.c > > index 25af85304ebe..f671a921dec5 100644 > > --- a/tools/bpf/bpftool/common.c > > +++ b/tools/bpf/bpftool/common.c > > @@ -169,34 +169,24 @@ int open_obj_pinned_any(char *path, enum bpf_obj_type exp_type) > > return fd; > > } > > -int do_pin_fd(int fd, const char *name) > > +int mount_bpffs_for_pin(const char *name) > > { > > char err_str[ERR_MAX_LEN]; > > char *file; > > char *dir; > > int err = 0; > > - err = bpf_obj_pin(fd, name); > > - if (!err) > > - goto out; > > - > > file = malloc(strlen(name) + 1); > > strcpy(file, name); > > dir = dirname(file); > > - if (errno != EPERM || is_bpffs(dir)) { > > - p_err("can't pin the object (%s): %s", name, strerror(errno)); > > + if (is_bpffs(dir)) { > > + /* nothing to do if already mounted */ > > goto out_free; > > } > > Nitpick: unnecessary brackets. Ack. > > - /* Attempt to mount bpffs, then retry pinning. */ > > err = mnt_bpffs(dir, err_str, ERR_MAX_LEN); > > - if (!err) { > > - err = bpf_obj_pin(fd, name); > > - if (err) > > - p_err("can't pin the object (%s): %s", name, > > - strerror(errno)); > > - } else { > > + if (err) { > > err_str[ERR_MAX_LEN - 1] = '\0'; > > p_err("can't mount BPF file system to pin the object (%s): %s", > > name, err_str); > > @@ -204,10 +194,20 @@ int do_pin_fd(int fd, const char *name) > > out_free: > > free(file); > > -out: > > return err; > > } > > +int do_pin_fd(int fd, const char *name) > > +{ > > + int err; > > + > > + err = mount_bpffs_for_pin(name); > > + if (err) > > + return err; > > + > > + return bpf_obj_pin(fd, name); > > +} > > + > > int do_pin_any(int argc, char **argv, int (*get_fd_by_id)(__u32)) > > { > > unsigned int id; > > diff --git a/tools/bpf/bpftool/main.h b/tools/bpf/bpftool/main.h > > index 28322ace2856..1383824c9baf 100644 > > --- a/tools/bpf/bpftool/main.h > > +++ b/tools/bpf/bpftool/main.h > > @@ -129,6 +129,7 @@ const char *get_fd_type_name(enum bpf_obj_type type); > > char *get_fdinfo(int fd, const char *key); > > int open_obj_pinned(char *path); > > int open_obj_pinned_any(char *path, enum bpf_obj_type exp_type); > > +int mount_bpffs_for_pin(const char *name); > > int do_pin_any(int argc, char **argv, int (*get_fd_by_id)(__u32)); > > int do_pin_fd(int fd, const char *name); > > diff --git a/tools/bpf/bpftool/prog.c b/tools/bpf/bpftool/prog.c > > index 5302ee282409..a4346dd673b1 100644 > > --- a/tools/bpf/bpftool/prog.c > > +++ b/tools/bpf/bpftool/prog.c > > @@ -81,6 +81,7 @@ static const char * const attach_type_strings[] = { > > [BPF_SK_SKB_STREAM_PARSER] = "stream_parser", > > [BPF_SK_SKB_STREAM_VERDICT] = "stream_verdict", > > [BPF_SK_MSG_VERDICT] = "msg_verdict", > > + [BPF_FLOW_DISSECTOR] = "flow_dissector", > > [__MAX_BPF_ATTACH_TYPE] = NULL, > > }; > > @@ -724,10 +725,11 @@ int map_replace_compar(const void *p1, const void *p2) > > static int do_attach(int argc, char **argv) > > { > > enum bpf_attach_type attach_type; > > - int err, mapfd, progfd; > > + int err, progfd; > > + int mapfd = 0; > > - if (!REQ_ARGS(5)) { > > - p_err("too few parameters for map attach"); > > + if (!REQ_ARGS(3)) { > > + p_err("too few parameters for attach"); > > return -EINVAL; > > } > > @@ -740,11 +742,17 @@ static int do_attach(int argc, char **argv) > > p_err("invalid attach type"); > > return -EINVAL; > > } > > - NEXT_ARG(); > > + if (attach_type != BPF_FLOW_DISSECTOR) { > > + NEXT_ARG(); > > + if (!REQ_ARGS(2)) { > > + p_err("too few parameters for map attach"); > > + return -EINVAL; > > + } > > - mapfd = map_parse_fd(&argc, &argv); > > - if (mapfd < 0) > > - return mapfd; > > + mapfd = map_parse_fd(&argc, &argv); > > + if (mapfd < 0) > > + return mapfd; > > + } > > err = bpf_prog_attach(progfd, mapfd, attach_type, 0); > > if (err) { > > @@ -760,10 +768,11 @@ static int do_attach(int argc, char **argv) > > static int do_detach(int argc, char **argv) > > { > > enum bpf_attach_type attach_type; > > - int err, mapfd, progfd; > > + int err, progfd; > > + int mapfd = 0; > > - if (!REQ_ARGS(5)) { > > - p_err("too few parameters for map detach"); > > + if (!REQ_ARGS(3)) { > > + p_err("too few parameters for detach"); > > return -EINVAL; > > } > > @@ -776,11 +785,17 @@ static int do_detach(int argc, char **argv) > > p_err("invalid attach type"); > > return -EINVAL; > > } > > - NEXT_ARG(); > > + if (attach_type != BPF_FLOW_DISSECTOR) { > > + NEXT_ARG(); > > + if (!REQ_ARGS(2)) { > > + p_err("too few parameters for map detach"); > > + return -EINVAL; > > + } > > Would that make sense to factor argument checks or parsing for do_attach() > and do_detach() to some extent? In order to reduce the number of > attach-type-based exceptions to add in the code if we have other attach > types that do not take maps in the future. I can move all argument parsing into a new function and use it from both do_attach and do_detach. > > - mapfd = map_parse_fd(&argc, &argv); > > - if (mapfd < 0) > > - return mapfd; > > + mapfd = map_parse_fd(&argc, &argv); > > + if (mapfd < 0) > > + return mapfd; > > + } > > err = bpf_prog_detach2(progfd, mapfd, attach_type); > > if (err) { > > @@ -792,15 +807,16 @@ static int do_detach(int argc, char **argv) > > jsonw_null(json_wtr); > > return 0; > > } > > -static int do_load(int argc, char **argv) > > + > > +static int load_with_options(int argc, char **argv, bool first_prog_only) > > { > > enum bpf_attach_type expected_attach_type; > > struct bpf_object_open_attr attr = { > > .prog_type = BPF_PROG_TYPE_UNSPEC, > > }; > > struct map_replace *map_replace = NULL; > > + struct bpf_program *prog = NULL, *pos; > > unsigned int old_map_fds = 0; > > - struct bpf_program *prog; > > struct bpf_object *obj; > > struct bpf_map *map; > > const char *pinfile; > > @@ -918,14 +934,20 @@ static int do_load(int argc, char **argv) > > goto err_free_reuse_maps; > > } > > - prog = bpf_program__next(NULL, obj); > > - if (!prog) { > > - p_err("object file doesn't contain any bpf program"); > > - goto err_close_obj; > > + if (first_prog_only) { > > + prog = bpf_program__next(NULL, obj); > > + if (!prog) { > > + p_err("object file doesn't contain any bpf program"); > > + goto err_close_obj; > > + } > > } > > - bpf_program__set_ifindex(prog, ifindex); > > if (attr.prog_type == BPF_PROG_TYPE_UNSPEC) { > > + if (!prog) { > > + p_err("can not guess program type when loading all programs\n"); > > + goto err_close_obj; > > + } > > + > > const char *sec_name = bpf_program__title(prog, false); > > err = libbpf_prog_type_by_name(sec_name, &attr.prog_type, > > @@ -936,8 +958,13 @@ static int do_load(int argc, char **argv) > > goto err_close_obj; > > } > > } > > - bpf_program__set_type(prog, attr.prog_type); > > - bpf_program__set_expected_attach_type(prog, expected_attach_type); > > + > > + bpf_object__for_each_program(pos, obj) { > > + bpf_program__set_ifindex(pos, ifindex); > > + bpf_program__set_type(pos, attr.prog_type); > > + bpf_program__set_expected_attach_type(pos, > > + expected_attach_type); > > + } > > I still believe you can have programs of different types here, and be able > to load them. I tried it and managed to have it working fine. If no type is > provided from command line we can retrieve types for each program from its > section name. If a type is provided on the command line, we can do the same, > but I am not sure we should do it, or impose that type for all programs > instead. I can move auto-detection into this new bpf_object__for_each_program loop. So if no type is specified, try to infer the type from each prog section name, otherwise, use the provided one for all progs. Do we want something like that? Btw, do you have some existing real life example of where it's needed so I can test this new implementation? (maybe something under samples/ ?) > > qsort(map_replace, old_map_fds, sizeof(*map_replace), > > map_replace_compar); > > @@ -1001,9 +1028,25 @@ static int do_load(int argc, char **argv) > > goto err_close_obj; > > } > > - if (do_pin_fd(bpf_program__fd(prog), pinfile)) > > + err = mount_bpffs_for_pin(pinfile); > > + if (err) > > goto err_close_obj; > > + if (prog) { > > Nit: Maybe "if (first_prog_only) {" instead? If I understand correctly, at > this stage it should be equivalent, but in my opinion it would make it > easier to understand why we have two cases here. Sure, I can do that if you think that's more readable, I don't have a preference. > > + err = bpf_obj_pin(bpf_program__fd(prog), pinfile); > > + if (err) { > > + p_err("failed to pin program %s", > > + bpf_program__title(prog, false)); > > + goto err_close_obj; > > + } > > + } else { > > + err = bpf_object__pin(obj, pinfile); > > + if (err) { > > + p_err("failed to pin all programs"); > > + goto err_close_obj; > > + } > > + } > > + > > if (json_output) > > jsonw_null(json_wtr); > > @@ -1023,6 +1066,16 @@ static int do_load(int argc, char **argv) > > return -1; > > } > > +static int do_load(int argc, char **argv) > > +{ > > + return load_with_options(argc, argv, true); > > +} > > + > > +static int do_loadall(int argc, char **argv) > > +{ > > + return load_with_options(argc, argv, false); > > +} > > + > > static int do_help(int argc, char **argv) > > { > > if (json_output) { > > @@ -1035,10 +1088,11 @@ static int do_help(int argc, char **argv) > > " %s %s dump xlated PROG [{ file FILE | opcodes | visual }]\n" > > " %s %s dump jited PROG [{ file FILE | opcodes }]\n" > > " %s %s pin PROG FILE\n" > > - " %s %s load OBJ FILE [type TYPE] [dev NAME] \\\n" > > + " %s %s { load | loadall } OBJ FILE \\\n" > > + " [type TYPE] [dev NAME] \\\n" > > " [map { idx IDX | name NAME } MAP]\n" > > - " %s %s attach PROG ATTACH_TYPE MAP\n" > > - " %s %s detach PROG ATTACH_TYPE MAP\n" > > + " %s %s attach PROG ATTACH_TYPE [MAP]\n" > > + " %s %s detach PROG ATTACH_TYPE [MAP]\n" > > " %s %s help\n" > > "\n" > > " " HELP_SPEC_MAP "\n" > > @@ -1050,7 +1104,8 @@ static int do_help(int argc, char **argv) > > " cgroup/bind4 | cgroup/bind6 | cgroup/post_bind4 |\n" > > " cgroup/post_bind6 | cgroup/connect4 | cgroup/connect6 |\n" > > " cgroup/sendmsg4 | cgroup/sendmsg6 }\n" > > - " ATTACH_TYPE := { msg_verdict | skb_verdict | skb_parse }\n" > > + " ATTACH_TYPE := { msg_verdict | skb_verdict | skb_parse |\n" > > + " flow_dissector }\n" > > " " HELP_SPEC_OPTIONS "\n" > > "", > > bin_name, argv[-2], bin_name, argv[-2], bin_name, argv[-2], > > @@ -1067,6 +1122,7 @@ static const struct cmd cmds[] = { > > { "dump", do_dump }, > > { "pin", do_pin }, > > { "load", do_load }, > > + { "loadall", do_loadall }, > > { "attach", do_attach }, > > { "detach", do_detach }, > > { 0 } > > >
2018-11-08 10:01 UTC-0800 ~ Stanislav Fomichev <sdf@fomichev.me> > On 11/08, Quentin Monnet wrote: >> Hi Stanislav, thanks for the changes! More comments below. > Thank you for another round of review! > >> 2018-11-07 21:39 UTC-0800 ~ Stanislav Fomichev <sdf@google.com> >>> This commit adds support for loading/attaching/detaching flow >>> dissector program. The structure of the flow dissector program is >>> assumed to be the same as in the selftests: >>> >>> * flow_dissector section with the main entry point >>> * a bunch of tail call progs >>> * a jmp_table map that is populated with the tail call progs >>> >>> When `bpftool load` is called with a flow_dissector prog (i.e. when the >>> first section is flow_dissector of 'type flow_dissector' argument is >>> passed), we load and pin all the programs/maps. User is responsible to >>> construct the jump table for the tail calls. >>> >>> The last argument of `bpftool attach` is made optional for this use >>> case. >>> >>> Example: >>> bpftool prog load tools/testing/selftests/bpf/bpf_flow.o \ >>> /sys/fs/bpf/flow type flow_dissector >>> >>> bpftool map update pinned /sys/fs/bpf/flow/jmp_table \ >>> key 0 0 0 0 \ >>> value pinned /sys/fs/bpf/flow/IP >>> >>> bpftool map update pinned /sys/fs/bpf/flow/jmp_table \ >>> key 1 0 0 0 \ >>> value pinned /sys/fs/bpf/flow/IPV6 >>> >>> bpftool map update pinned /sys/fs/bpf/flow/jmp_table \ >>> key 2 0 0 0 \ >>> value pinned /sys/fs/bpf/flow/IPV6OP >>> >>> bpftool map update pinned /sys/fs/bpf/flow/jmp_table \ >>> key 3 0 0 0 \ >>> value pinned /sys/fs/bpf/flow/IPV6FR >>> >>> bpftool map update pinned /sys/fs/bpf/flow/jmp_table \ >>> key 4 0 0 0 \ >>> value pinned /sys/fs/bpf/flow/MPLS >>> >>> bpftool map update pinned /sys/fs/bpf/flow/jmp_table \ >>> key 5 0 0 0 \ >>> value pinned /sys/fs/bpf/flow/VLAN >>> >>> bpftool prog attach pinned /sys/fs/bpf/flow/flow_dissector flow_dissector >>> >>> Tested by using the above lines to load the prog in >>> the test_flow_dissector.sh selftest. >>> >>> Signed-off-by: Stanislav Fomichev <sdf@google.com> >>> --- >>> .../bpftool/Documentation/bpftool-prog.rst | 36 ++++-- >>> tools/bpf/bpftool/bash-completion/bpftool | 6 +- >>> tools/bpf/bpftool/common.c | 30 ++--- >>> tools/bpf/bpftool/main.h | 1 + >>> tools/bpf/bpftool/prog.c | 112 +++++++++++++----- >>> 5 files changed, 126 insertions(+), 59 deletions(-) >>> >>> diff --git a/tools/bpf/bpftool/Documentation/bpftool-prog.rst b/tools/bpf/bpftool/Documentation/bpftool-prog.rst >>> index ac4e904b10fb..0374634c3087 100644 >>> --- a/tools/bpf/bpftool/Documentation/bpftool-prog.rst >>> +++ b/tools/bpf/bpftool/Documentation/bpftool-prog.rst >>> @@ -15,7 +15,8 @@ SYNOPSIS >>> *OPTIONS* := { { **-j** | **--json** } [{ **-p** | **--pretty** }] | { **-f** | **--bpffs** } } >>> *COMMANDS* := >>> - { **show** | **list** | **dump xlated** | **dump jited** | **pin** | **load** | **help** } >>> + { **show** | **list** | **dump xlated** | **dump jited** | **pin** | **load** >>> + | **loadall** | **help** } >>> MAP COMMANDS >>> ============= >>> @@ -24,9 +25,9 @@ MAP COMMANDS >>> | **bpftool** **prog dump xlated** *PROG* [{**file** *FILE* | **opcodes** | **visual**}] >>> | **bpftool** **prog dump jited** *PROG* [{**file** *FILE* | **opcodes**}] >>> | **bpftool** **prog pin** *PROG* *FILE* >>> -| **bpftool** **prog load** *OBJ* *FILE* [**type** *TYPE*] [**map** {**idx** *IDX* | **name** *NAME*} *MAP*] [**dev** *NAME*] >>> -| **bpftool** **prog attach** *PROG* *ATTACH_TYPE* *MAP* >>> -| **bpftool** **prog detach** *PROG* *ATTACH_TYPE* *MAP* >>> +| **bpftool** **prog { load | loadall }** *OBJ* *FILE* [**type** *TYPE*] [**map** {**idx** *IDX* | **name** *NAME*} *MAP*] [**dev** *NAME*] >>> +| **bpftool** **prog attach** *PROG* *ATTACH_TYPE* [*MAP*] >>> +| **bpftool** **prog detach** *PROG* *ATTACH_TYPE* [*MAP*] >>> | **bpftool** **prog help** >>> | >>> | *MAP* := { **id** *MAP_ID* | **pinned** *FILE* } >>> @@ -39,7 +40,9 @@ MAP COMMANDS >>> | **cgroup/bind4** | **cgroup/bind6** | **cgroup/post_bind4** | **cgroup/post_bind6** | >>> | **cgroup/connect4** | **cgroup/connect6** | **cgroup/sendmsg4** | **cgroup/sendmsg6** >>> | } >>> -| *ATTACH_TYPE* := { **msg_verdict** | **skb_verdict** | **skb_parse** } >>> +| *ATTACH_TYPE* := { >>> +| **msg_verdict** | **skb_verdict** | **skb_parse** | **flow_dissector** >>> +| } >>> DESCRIPTION >>> @@ -79,8 +82,11 @@ DESCRIPTION >>> contain a dot character ('.'), which is reserved for future >>> extensions of *bpffs*. >>> - **bpftool prog load** *OBJ* *FILE* [**type** *TYPE*] [**map** {**idx** *IDX* | **name** *NAME*} *MAP*] [**dev** *NAME*] >>> + **bpftool prog { load | loadall }** *OBJ* *FILE* [**type** *TYPE*] [**map** {**idx** *IDX* | **name** *NAME*} *MAP*] [**dev** *NAME*] >>> Load bpf program from binary *OBJ* and pin as *FILE*. >>> + **bpftool prog load** will pin only the first bpf program >>> + from the *OBJ*, **bpftool prog loadall** will pin all maps >>> + and programs from the *OBJ*. >> >> This could be improved regarding maps: with "bpftool prog load" I think we >> also load and pin all maps, but your description implies this is only the >> case with "loadall" > I don't think we pin any maps with `bpftool prog load`, we certainly load > them, but we don't pin any afaict. Can you point me to the code where we > pin the maps? > My bad. I read "pin" but thought "load". It does not pin them indeed, sorry about that. >>> **type** is optional, if not specified program type will be >>> inferred from section names. >>> By default bpftool will create new maps as declared in the ELF >>> @@ -97,13 +103,17 @@ DESCRIPTION >>> contain a dot character ('.'), which is reserved for future >>> extensions of *bpffs*. >>> - **bpftool prog attach** *PROG* *ATTACH_TYPE* *MAP* >>> - Attach bpf program *PROG* (with type specified by *ATTACH_TYPE*) >>> - to the map *MAP*. >>> - >>> - **bpftool prog detach** *PROG* *ATTACH_TYPE* *MAP* >>> - Detach bpf program *PROG* (with type specified by *ATTACH_TYPE*) >>> - from the map *MAP*. >>> + **bpftool prog attach** *PROG* *ATTACH_TYPE* [*MAP*] >>> + Attach bpf program *PROG* (with type specified by >>> + *ATTACH_TYPE*). Most *ATTACH_TYPEs* require a *MAP* >>> + parameter, with the exception of *flow_dissector* which is >>> + attached to current networking name space. >>> + >>> + **bpftool prog detach** *PROG* *ATTACH_TYPE* [*MAP*] >>> + Detach bpf program *PROG* (with type specified by >>> + *ATTACH_TYPE*). Most *ATTACH_TYPEs* require a *MAP* >>> + parameter, with the exception of *flow_dissector* which is >>> + detached from the current networking name space. >> >> While at it could you please fix those two paragraphs to use tabs for >> indentation, as the rest of the doc? Thanks! > Time to teach my vim to use tabs in .rst files. Sorry about that. Those paragraphs were using spaces already, so you didn't introduce that :). But all others use tabs so its a good occasion to fix it. >>> **bpftool prog help** >>> Print short help message. >>> diff --git a/tools/bpf/bpftool/bash-completion/bpftool b/tools/bpf/bpftool/bash-completion/bpftool >>> index 3f78e6404589..ad0fc919f7ec 100644 >>> --- a/tools/bpf/bpftool/bash-completion/bpftool >>> +++ b/tools/bpf/bpftool/bash-completion/bpftool >>> @@ -243,7 +243,7 @@ _bpftool() >>> # Completion depends on object and command in use >>> case $object in >>> prog) >>> - if [[ $command != "load" ]]; then >>> + if [[ $command != "load" && $command != "loadall" ]]; then >>> case $prev in >>> id) >>> _bpftool_get_prog_ids >>> @@ -299,7 +299,7 @@ _bpftool() >>> fi >>> if [[ ${#words[@]} == 6 ]]; then >>> - COMPREPLY=( $( compgen -W "msg_verdict skb_verdict skb_parse" -- "$cur" ) ) >>> + COMPREPLY=( $( compgen -W "msg_verdict skb_verdict skb_parse flow_dissector" -- "$cur" ) ) >>> return 0 >>> fi >>> @@ -309,7 +309,7 @@ _bpftool() >>> fi >>> return 0 >>> ;; >>> - load) >>> + load|loadall) >>> local obj >>> if [[ ${#words[@]} -lt 6 ]]; then >> >> You also want to update completion for the program types, at line 341 or so. >> Feel free to split that list on several lines, by the way :). > Will do, thanks! > >>> diff --git a/tools/bpf/bpftool/common.c b/tools/bpf/bpftool/common.c >>> index 25af85304ebe..f671a921dec5 100644 >>> --- a/tools/bpf/bpftool/common.c >>> +++ b/tools/bpf/bpftool/common.c >>> @@ -169,34 +169,24 @@ int open_obj_pinned_any(char *path, enum bpf_obj_type exp_type) >>> return fd; >>> } >>> -int do_pin_fd(int fd, const char *name) >>> +int mount_bpffs_for_pin(const char *name) >>> { >>> char err_str[ERR_MAX_LEN]; >>> char *file; >>> char *dir; >>> int err = 0; >>> - err = bpf_obj_pin(fd, name); >>> - if (!err) >>> - goto out; >>> - >>> file = malloc(strlen(name) + 1); >>> strcpy(file, name); >>> dir = dirname(file); >>> - if (errno != EPERM || is_bpffs(dir)) { >>> - p_err("can't pin the object (%s): %s", name, strerror(errno)); >>> + if (is_bpffs(dir)) { >>> + /* nothing to do if already mounted */ >>> goto out_free; >>> } >> >> Nitpick: unnecessary brackets. > Ack. > >>> - /* Attempt to mount bpffs, then retry pinning. */ >>> err = mnt_bpffs(dir, err_str, ERR_MAX_LEN); >>> - if (!err) { >>> - err = bpf_obj_pin(fd, name); >>> - if (err) >>> - p_err("can't pin the object (%s): %s", name, >>> - strerror(errno)); >>> - } else { >>> + if (err) { >>> err_str[ERR_MAX_LEN - 1] = '\0'; >>> p_err("can't mount BPF file system to pin the object (%s): %s", >>> name, err_str); >>> @@ -204,10 +194,20 @@ int do_pin_fd(int fd, const char *name) >>> out_free: >>> free(file); >>> -out: >>> return err; >>> } >>> +int do_pin_fd(int fd, const char *name) >>> +{ >>> + int err; >>> + >>> + err = mount_bpffs_for_pin(name); >>> + if (err) >>> + return err; >>> + >>> + return bpf_obj_pin(fd, name); >>> +} >>> + >>> int do_pin_any(int argc, char **argv, int (*get_fd_by_id)(__u32)) >>> { >>> unsigned int id; >>> diff --git a/tools/bpf/bpftool/main.h b/tools/bpf/bpftool/main.h >>> index 28322ace2856..1383824c9baf 100644 >>> --- a/tools/bpf/bpftool/main.h >>> +++ b/tools/bpf/bpftool/main.h >>> @@ -129,6 +129,7 @@ const char *get_fd_type_name(enum bpf_obj_type type); >>> char *get_fdinfo(int fd, const char *key); >>> int open_obj_pinned(char *path); >>> int open_obj_pinned_any(char *path, enum bpf_obj_type exp_type); >>> +int mount_bpffs_for_pin(const char *name); >>> int do_pin_any(int argc, char **argv, int (*get_fd_by_id)(__u32)); >>> int do_pin_fd(int fd, const char *name); >>> diff --git a/tools/bpf/bpftool/prog.c b/tools/bpf/bpftool/prog.c >>> index 5302ee282409..a4346dd673b1 100644 >>> --- a/tools/bpf/bpftool/prog.c >>> +++ b/tools/bpf/bpftool/prog.c >>> @@ -81,6 +81,7 @@ static const char * const attach_type_strings[] = { >>> [BPF_SK_SKB_STREAM_PARSER] = "stream_parser", >>> [BPF_SK_SKB_STREAM_VERDICT] = "stream_verdict", >>> [BPF_SK_MSG_VERDICT] = "msg_verdict", >>> + [BPF_FLOW_DISSECTOR] = "flow_dissector", >>> [__MAX_BPF_ATTACH_TYPE] = NULL, >>> }; >>> @@ -724,10 +725,11 @@ int map_replace_compar(const void *p1, const void *p2) >>> static int do_attach(int argc, char **argv) >>> { >>> enum bpf_attach_type attach_type; >>> - int err, mapfd, progfd; >>> + int err, progfd; >>> + int mapfd = 0; >>> - if (!REQ_ARGS(5)) { >>> - p_err("too few parameters for map attach"); >>> + if (!REQ_ARGS(3)) { >>> + p_err("too few parameters for attach"); >>> return -EINVAL; >>> } >>> @@ -740,11 +742,17 @@ static int do_attach(int argc, char **argv) >>> p_err("invalid attach type"); >>> return -EINVAL; >>> } >>> - NEXT_ARG(); >>> + if (attach_type != BPF_FLOW_DISSECTOR) { >>> + NEXT_ARG(); >>> + if (!REQ_ARGS(2)) { >>> + p_err("too few parameters for map attach"); >>> + return -EINVAL; >>> + } >>> - mapfd = map_parse_fd(&argc, &argv); >>> - if (mapfd < 0) >>> - return mapfd; >>> + mapfd = map_parse_fd(&argc, &argv); >>> + if (mapfd < 0) >>> + return mapfd; >>> + } >>> err = bpf_prog_attach(progfd, mapfd, attach_type, 0); >>> if (err) { >>> @@ -760,10 +768,11 @@ static int do_attach(int argc, char **argv) >>> static int do_detach(int argc, char **argv) >>> { >>> enum bpf_attach_type attach_type; >>> - int err, mapfd, progfd; >>> + int err, progfd; >>> + int mapfd = 0; >>> - if (!REQ_ARGS(5)) { >>> - p_err("too few parameters for map detach"); >>> + if (!REQ_ARGS(3)) { >>> + p_err("too few parameters for detach"); >>> return -EINVAL; >>> } >>> @@ -776,11 +785,17 @@ static int do_detach(int argc, char **argv) >>> p_err("invalid attach type"); >>> return -EINVAL; >>> } >>> - NEXT_ARG(); >>> + if (attach_type != BPF_FLOW_DISSECTOR) { >>> + NEXT_ARG(); >>> + if (!REQ_ARGS(2)) { >>> + p_err("too few parameters for map detach"); >>> + return -EINVAL; >>> + } >> >> Would that make sense to factor argument checks or parsing for do_attach() >> and do_detach() to some extent? In order to reduce the number of >> attach-type-based exceptions to add in the code if we have other attach >> types that do not take maps in the future. > I can move all argument parsing into a new function and use it from both > do_attach and do_detach. Sounds good to me, thanks! >>> - mapfd = map_parse_fd(&argc, &argv); >>> - if (mapfd < 0) >>> - return mapfd; >>> + mapfd = map_parse_fd(&argc, &argv); >>> + if (mapfd < 0) >>> + return mapfd; >>> + } >>> err = bpf_prog_detach2(progfd, mapfd, attach_type); >>> if (err) { >>> @@ -792,15 +807,16 @@ static int do_detach(int argc, char **argv) >>> jsonw_null(json_wtr); >>> return 0; >>> } >>> -static int do_load(int argc, char **argv) >>> + >>> +static int load_with_options(int argc, char **argv, bool first_prog_only) >>> { >>> enum bpf_attach_type expected_attach_type; >>> struct bpf_object_open_attr attr = { >>> .prog_type = BPF_PROG_TYPE_UNSPEC, >>> }; >>> struct map_replace *map_replace = NULL; >>> + struct bpf_program *prog = NULL, *pos; >>> unsigned int old_map_fds = 0; >>> - struct bpf_program *prog; >>> struct bpf_object *obj; >>> struct bpf_map *map; >>> const char *pinfile; >>> @@ -918,14 +934,20 @@ static int do_load(int argc, char **argv) >>> goto err_free_reuse_maps; >>> } >>> - prog = bpf_program__next(NULL, obj); >>> - if (!prog) { >>> - p_err("object file doesn't contain any bpf program"); >>> - goto err_close_obj; >>> + if (first_prog_only) { >>> + prog = bpf_program__next(NULL, obj); >>> + if (!prog) { >>> + p_err("object file doesn't contain any bpf program"); >>> + goto err_close_obj; >>> + } >>> } >>> - bpf_program__set_ifindex(prog, ifindex); >>> if (attr.prog_type == BPF_PROG_TYPE_UNSPEC) { >>> + if (!prog) { >>> + p_err("can not guess program type when loading all programs\n"); >>> + goto err_close_obj; >>> + } >>> + >>> const char *sec_name = bpf_program__title(prog, false); >>> err = libbpf_prog_type_by_name(sec_name, &attr.prog_type, >>> @@ -936,8 +958,13 @@ static int do_load(int argc, char **argv) >>> goto err_close_obj; >>> } >>> } >>> - bpf_program__set_type(prog, attr.prog_type); >>> - bpf_program__set_expected_attach_type(prog, expected_attach_type); >>> + >>> + bpf_object__for_each_program(pos, obj) { >>> + bpf_program__set_ifindex(pos, ifindex); >>> + bpf_program__set_type(pos, attr.prog_type); >>> + bpf_program__set_expected_attach_type(pos, >>> + expected_attach_type); >>> + } >> >> I still believe you can have programs of different types here, and be able >> to load them. I tried it and managed to have it working fine. If no type is >> provided from command line we can retrieve types for each program from its >> section name. If a type is provided on the command line, we can do the same, >> but I am not sure we should do it, or impose that type for all programs >> instead. > I can move auto-detection into this new bpf_object__for_each_program > loop. So if no type is specified, try to infer the type from each prog > section name, otherwise, use the provided one for all progs. Do we want > something like that? This is what I have in mind. But others may disagree. > Btw, do you have some existing real life example of where it's needed so > I can test this new implementation? (maybe something under samples/ ?) I thought about an ELF file containing both an XDP and a TC classifier program for example. XDP can mark programs for TC, then TC process them with all the facilities we have for skbs. It does not _have_ to be in the same ELF file, but could be. I haven't searched samples/bpf/ in depth, but a grep on SEC shows a couple of files with several types (kprobe/kretprobe, classifier/xdp). samples/bpf/xdp2skb_meta_kern.c looks like a good candidate. Or actually for testing purposes, I simply used the following: #define SEC(NAME) __attribute__((section(NAME), used)) int _version SEC("version") = 1; SEC("classifier") int func() { return 1; } SEC("xdp") int funcbar() { return 0; } >>> qsort(map_replace, old_map_fds, sizeof(*map_replace), >>> map_replace_compar); >>> @@ -1001,9 +1028,25 @@ static int do_load(int argc, char **argv) >>> goto err_close_obj; >>> } >>> - if (do_pin_fd(bpf_program__fd(prog), pinfile)) >>> + err = mount_bpffs_for_pin(pinfile); >>> + if (err) >>> goto err_close_obj; >>> + if (prog) { >> >> Nit: Maybe "if (first_prog_only) {" instead? If I understand correctly, at >> this stage it should be equivalent, but in my opinion it would make it >> easier to understand why we have two cases here. > Sure, I can do that if you think that's more readable, I don't have a > preference. Thanks! Quentin
On 11/08, Quentin Monnet wrote: > 2018-11-08 10:01 UTC-0800 ~ Stanislav Fomichev <sdf@fomichev.me> > > On 11/08, Quentin Monnet wrote: > >> Hi Stanislav, thanks for the changes! More comments below. > > Thank you for another round of review! > > > >> 2018-11-07 21:39 UTC-0800 ~ Stanislav Fomichev <sdf@google.com> > >>> This commit adds support for loading/attaching/detaching flow > >>> dissector program. The structure of the flow dissector program is > >>> assumed to be the same as in the selftests: > >>> > >>> * flow_dissector section with the main entry point > >>> * a bunch of tail call progs > >>> * a jmp_table map that is populated with the tail call progs > >>> > >>> When `bpftool load` is called with a flow_dissector prog (i.e. when the > >>> first section is flow_dissector of 'type flow_dissector' argument is > >>> passed), we load and pin all the programs/maps. User is responsible to > >>> construct the jump table for the tail calls. > >>> > >>> The last argument of `bpftool attach` is made optional for this use > >>> case. > >>> > >>> Example: > >>> bpftool prog load tools/testing/selftests/bpf/bpf_flow.o \ > >>> /sys/fs/bpf/flow type flow_dissector > >>> > >>> bpftool map update pinned /sys/fs/bpf/flow/jmp_table \ > >>> key 0 0 0 0 \ > >>> value pinned /sys/fs/bpf/flow/IP > >>> > >>> bpftool map update pinned /sys/fs/bpf/flow/jmp_table \ > >>> key 1 0 0 0 \ > >>> value pinned /sys/fs/bpf/flow/IPV6 > >>> > >>> bpftool map update pinned /sys/fs/bpf/flow/jmp_table \ > >>> key 2 0 0 0 \ > >>> value pinned /sys/fs/bpf/flow/IPV6OP > >>> > >>> bpftool map update pinned /sys/fs/bpf/flow/jmp_table \ > >>> key 3 0 0 0 \ > >>> value pinned /sys/fs/bpf/flow/IPV6FR > >>> > >>> bpftool map update pinned /sys/fs/bpf/flow/jmp_table \ > >>> key 4 0 0 0 \ > >>> value pinned /sys/fs/bpf/flow/MPLS > >>> > >>> bpftool map update pinned /sys/fs/bpf/flow/jmp_table \ > >>> key 5 0 0 0 \ > >>> value pinned /sys/fs/bpf/flow/VLAN > >>> > >>> bpftool prog attach pinned /sys/fs/bpf/flow/flow_dissector flow_dissector > >>> > >>> Tested by using the above lines to load the prog in > >>> the test_flow_dissector.sh selftest. > >>> > >>> Signed-off-by: Stanislav Fomichev <sdf@google.com> > >>> --- > >>> .../bpftool/Documentation/bpftool-prog.rst | 36 ++++-- > >>> tools/bpf/bpftool/bash-completion/bpftool | 6 +- > >>> tools/bpf/bpftool/common.c | 30 ++--- > >>> tools/bpf/bpftool/main.h | 1 + > >>> tools/bpf/bpftool/prog.c | 112 +++++++++++++----- > >>> 5 files changed, 126 insertions(+), 59 deletions(-) > >>> > >>> diff --git a/tools/bpf/bpftool/Documentation/bpftool-prog.rst b/tools/bpf/bpftool/Documentation/bpftool-prog.rst > >>> index ac4e904b10fb..0374634c3087 100644 > >>> --- a/tools/bpf/bpftool/Documentation/bpftool-prog.rst > >>> +++ b/tools/bpf/bpftool/Documentation/bpftool-prog.rst > >>> @@ -15,7 +15,8 @@ SYNOPSIS > >>> *OPTIONS* := { { **-j** | **--json** } [{ **-p** | **--pretty** }] | { **-f** | **--bpffs** } } > >>> *COMMANDS* := > >>> - { **show** | **list** | **dump xlated** | **dump jited** | **pin** | **load** | **help** } > >>> + { **show** | **list** | **dump xlated** | **dump jited** | **pin** | **load** > >>> + | **loadall** | **help** } > >>> MAP COMMANDS > >>> ============= > >>> @@ -24,9 +25,9 @@ MAP COMMANDS > >>> | **bpftool** **prog dump xlated** *PROG* [{**file** *FILE* | **opcodes** | **visual**}] > >>> | **bpftool** **prog dump jited** *PROG* [{**file** *FILE* | **opcodes**}] > >>> | **bpftool** **prog pin** *PROG* *FILE* > >>> -| **bpftool** **prog load** *OBJ* *FILE* [**type** *TYPE*] [**map** {**idx** *IDX* | **name** *NAME*} *MAP*] [**dev** *NAME*] > >>> -| **bpftool** **prog attach** *PROG* *ATTACH_TYPE* *MAP* > >>> -| **bpftool** **prog detach** *PROG* *ATTACH_TYPE* *MAP* > >>> +| **bpftool** **prog { load | loadall }** *OBJ* *FILE* [**type** *TYPE*] [**map** {**idx** *IDX* | **name** *NAME*} *MAP*] [**dev** *NAME*] > >>> +| **bpftool** **prog attach** *PROG* *ATTACH_TYPE* [*MAP*] > >>> +| **bpftool** **prog detach** *PROG* *ATTACH_TYPE* [*MAP*] > >>> | **bpftool** **prog help** > >>> | > >>> | *MAP* := { **id** *MAP_ID* | **pinned** *FILE* } > >>> @@ -39,7 +40,9 @@ MAP COMMANDS > >>> | **cgroup/bind4** | **cgroup/bind6** | **cgroup/post_bind4** | **cgroup/post_bind6** | > >>> | **cgroup/connect4** | **cgroup/connect6** | **cgroup/sendmsg4** | **cgroup/sendmsg6** > >>> | } > >>> -| *ATTACH_TYPE* := { **msg_verdict** | **skb_verdict** | **skb_parse** } > >>> +| *ATTACH_TYPE* := { > >>> +| **msg_verdict** | **skb_verdict** | **skb_parse** | **flow_dissector** > >>> +| } > >>> DESCRIPTION > >>> @@ -79,8 +82,11 @@ DESCRIPTION > >>> contain a dot character ('.'), which is reserved for future > >>> extensions of *bpffs*. > >>> - **bpftool prog load** *OBJ* *FILE* [**type** *TYPE*] [**map** {**idx** *IDX* | **name** *NAME*} *MAP*] [**dev** *NAME*] > >>> + **bpftool prog { load | loadall }** *OBJ* *FILE* [**type** *TYPE*] [**map** {**idx** *IDX* | **name** *NAME*} *MAP*] [**dev** *NAME*] > >>> Load bpf program from binary *OBJ* and pin as *FILE*. > >>> + **bpftool prog load** will pin only the first bpf program > >>> + from the *OBJ*, **bpftool prog loadall** will pin all maps > >>> + and programs from the *OBJ*. > >> > >> This could be improved regarding maps: with "bpftool prog load" I think we > >> also load and pin all maps, but your description implies this is only the > >> case with "loadall" > > I don't think we pin any maps with `bpftool prog load`, we certainly load > > them, but we don't pin any afaict. Can you point me to the code where we > > pin the maps? > > > > My bad. I read "pin" but thought "load". It does not pin them indeed, > sorry about that. > > >>> **type** is optional, if not specified program type will be > >>> inferred from section names. > >>> By default bpftool will create new maps as declared in the ELF > >>> @@ -97,13 +103,17 @@ DESCRIPTION > >>> contain a dot character ('.'), which is reserved for future > >>> extensions of *bpffs*. > >>> - **bpftool prog attach** *PROG* *ATTACH_TYPE* *MAP* > >>> - Attach bpf program *PROG* (with type specified by *ATTACH_TYPE*) > >>> - to the map *MAP*. > >>> - > >>> - **bpftool prog detach** *PROG* *ATTACH_TYPE* *MAP* > >>> - Detach bpf program *PROG* (with type specified by *ATTACH_TYPE*) > >>> - from the map *MAP*. > >>> + **bpftool prog attach** *PROG* *ATTACH_TYPE* [*MAP*] > >>> + Attach bpf program *PROG* (with type specified by > >>> + *ATTACH_TYPE*). Most *ATTACH_TYPEs* require a *MAP* > >>> + parameter, with the exception of *flow_dissector* which is > >>> + attached to current networking name space. > >>> + > >>> + **bpftool prog detach** *PROG* *ATTACH_TYPE* [*MAP*] > >>> + Detach bpf program *PROG* (with type specified by > >>> + *ATTACH_TYPE*). Most *ATTACH_TYPEs* require a *MAP* > >>> + parameter, with the exception of *flow_dissector* which is > >>> + detached from the current networking name space. > >> > >> While at it could you please fix those two paragraphs to use tabs for > >> indentation, as the rest of the doc? Thanks! > > Time to teach my vim to use tabs in .rst files. Sorry about that. > > Those paragraphs were using spaces already, so you didn't introduce that > :). But all others use tabs so its a good occasion to fix it. > > >>> **bpftool prog help** > >>> Print short help message. > >>> diff --git a/tools/bpf/bpftool/bash-completion/bpftool b/tools/bpf/bpftool/bash-completion/bpftool > >>> index 3f78e6404589..ad0fc919f7ec 100644 > >>> --- a/tools/bpf/bpftool/bash-completion/bpftool > >>> +++ b/tools/bpf/bpftool/bash-completion/bpftool > >>> @@ -243,7 +243,7 @@ _bpftool() > >>> # Completion depends on object and command in use > >>> case $object in > >>> prog) > >>> - if [[ $command != "load" ]]; then > >>> + if [[ $command != "load" && $command != "loadall" ]]; then > >>> case $prev in > >>> id) > >>> _bpftool_get_prog_ids > >>> @@ -299,7 +299,7 @@ _bpftool() > >>> fi > >>> if [[ ${#words[@]} == 6 ]]; then > >>> - COMPREPLY=( $( compgen -W "msg_verdict skb_verdict skb_parse" -- "$cur" ) ) > >>> + COMPREPLY=( $( compgen -W "msg_verdict skb_verdict skb_parse flow_dissector" -- "$cur" ) ) > >>> return 0 > >>> fi > >>> @@ -309,7 +309,7 @@ _bpftool() > >>> fi > >>> return 0 > >>> ;; > >>> - load) > >>> + load|loadall) > >>> local obj > >>> if [[ ${#words[@]} -lt 6 ]]; then > >> > >> You also want to update completion for the program types, at line 341 or so. > >> Feel free to split that list on several lines, by the way :). > > Will do, thanks! > > > >>> diff --git a/tools/bpf/bpftool/common.c b/tools/bpf/bpftool/common.c > >>> index 25af85304ebe..f671a921dec5 100644 > >>> --- a/tools/bpf/bpftool/common.c > >>> +++ b/tools/bpf/bpftool/common.c > >>> @@ -169,34 +169,24 @@ int open_obj_pinned_any(char *path, enum bpf_obj_type exp_type) > >>> return fd; > >>> } > >>> -int do_pin_fd(int fd, const char *name) > >>> +int mount_bpffs_for_pin(const char *name) > >>> { > >>> char err_str[ERR_MAX_LEN]; > >>> char *file; > >>> char *dir; > >>> int err = 0; > >>> - err = bpf_obj_pin(fd, name); > >>> - if (!err) > >>> - goto out; > >>> - > >>> file = malloc(strlen(name) + 1); > >>> strcpy(file, name); > >>> dir = dirname(file); > >>> - if (errno != EPERM || is_bpffs(dir)) { > >>> - p_err("can't pin the object (%s): %s", name, strerror(errno)); > >>> + if (is_bpffs(dir)) { > >>> + /* nothing to do if already mounted */ > >>> goto out_free; > >>> } > >> > >> Nitpick: unnecessary brackets. > > Ack. > > > >>> - /* Attempt to mount bpffs, then retry pinning. */ > >>> err = mnt_bpffs(dir, err_str, ERR_MAX_LEN); > >>> - if (!err) { > >>> - err = bpf_obj_pin(fd, name); > >>> - if (err) > >>> - p_err("can't pin the object (%s): %s", name, > >>> - strerror(errno)); > >>> - } else { > >>> + if (err) { > >>> err_str[ERR_MAX_LEN - 1] = '\0'; > >>> p_err("can't mount BPF file system to pin the object (%s): %s", > >>> name, err_str); > >>> @@ -204,10 +194,20 @@ int do_pin_fd(int fd, const char *name) > >>> out_free: > >>> free(file); > >>> -out: > >>> return err; > >>> } > >>> +int do_pin_fd(int fd, const char *name) > >>> +{ > >>> + int err; > >>> + > >>> + err = mount_bpffs_for_pin(name); > >>> + if (err) > >>> + return err; > >>> + > >>> + return bpf_obj_pin(fd, name); > >>> +} > >>> + > >>> int do_pin_any(int argc, char **argv, int (*get_fd_by_id)(__u32)) > >>> { > >>> unsigned int id; > >>> diff --git a/tools/bpf/bpftool/main.h b/tools/bpf/bpftool/main.h > >>> index 28322ace2856..1383824c9baf 100644 > >>> --- a/tools/bpf/bpftool/main.h > >>> +++ b/tools/bpf/bpftool/main.h > >>> @@ -129,6 +129,7 @@ const char *get_fd_type_name(enum bpf_obj_type type); > >>> char *get_fdinfo(int fd, const char *key); > >>> int open_obj_pinned(char *path); > >>> int open_obj_pinned_any(char *path, enum bpf_obj_type exp_type); > >>> +int mount_bpffs_for_pin(const char *name); > >>> int do_pin_any(int argc, char **argv, int (*get_fd_by_id)(__u32)); > >>> int do_pin_fd(int fd, const char *name); > >>> diff --git a/tools/bpf/bpftool/prog.c b/tools/bpf/bpftool/prog.c > >>> index 5302ee282409..a4346dd673b1 100644 > >>> --- a/tools/bpf/bpftool/prog.c > >>> +++ b/tools/bpf/bpftool/prog.c > >>> @@ -81,6 +81,7 @@ static const char * const attach_type_strings[] = { > >>> [BPF_SK_SKB_STREAM_PARSER] = "stream_parser", > >>> [BPF_SK_SKB_STREAM_VERDICT] = "stream_verdict", > >>> [BPF_SK_MSG_VERDICT] = "msg_verdict", > >>> + [BPF_FLOW_DISSECTOR] = "flow_dissector", > >>> [__MAX_BPF_ATTACH_TYPE] = NULL, > >>> }; > >>> @@ -724,10 +725,11 @@ int map_replace_compar(const void *p1, const void *p2) > >>> static int do_attach(int argc, char **argv) > >>> { > >>> enum bpf_attach_type attach_type; > >>> - int err, mapfd, progfd; > >>> + int err, progfd; > >>> + int mapfd = 0; > >>> - if (!REQ_ARGS(5)) { > >>> - p_err("too few parameters for map attach"); > >>> + if (!REQ_ARGS(3)) { > >>> + p_err("too few parameters for attach"); > >>> return -EINVAL; > >>> } > >>> @@ -740,11 +742,17 @@ static int do_attach(int argc, char **argv) > >>> p_err("invalid attach type"); > >>> return -EINVAL; > >>> } > >>> - NEXT_ARG(); > >>> + if (attach_type != BPF_FLOW_DISSECTOR) { > >>> + NEXT_ARG(); > >>> + if (!REQ_ARGS(2)) { > >>> + p_err("too few parameters for map attach"); > >>> + return -EINVAL; > >>> + } > >>> - mapfd = map_parse_fd(&argc, &argv); > >>> - if (mapfd < 0) > >>> - return mapfd; > >>> + mapfd = map_parse_fd(&argc, &argv); > >>> + if (mapfd < 0) > >>> + return mapfd; > >>> + } > >>> err = bpf_prog_attach(progfd, mapfd, attach_type, 0); > >>> if (err) { > >>> @@ -760,10 +768,11 @@ static int do_attach(int argc, char **argv) > >>> static int do_detach(int argc, char **argv) > >>> { > >>> enum bpf_attach_type attach_type; > >>> - int err, mapfd, progfd; > >>> + int err, progfd; > >>> + int mapfd = 0; > >>> - if (!REQ_ARGS(5)) { > >>> - p_err("too few parameters for map detach"); > >>> + if (!REQ_ARGS(3)) { > >>> + p_err("too few parameters for detach"); > >>> return -EINVAL; > >>> } > >>> @@ -776,11 +785,17 @@ static int do_detach(int argc, char **argv) > >>> p_err("invalid attach type"); > >>> return -EINVAL; > >>> } > >>> - NEXT_ARG(); > >>> + if (attach_type != BPF_FLOW_DISSECTOR) { > >>> + NEXT_ARG(); > >>> + if (!REQ_ARGS(2)) { > >>> + p_err("too few parameters for map detach"); > >>> + return -EINVAL; > >>> + } > >> > >> Would that make sense to factor argument checks or parsing for do_attach() > >> and do_detach() to some extent? In order to reduce the number of > >> attach-type-based exceptions to add in the code if we have other attach > >> types that do not take maps in the future. > > I can move all argument parsing into a new function and use it from both > > do_attach and do_detach. > > Sounds good to me, thanks! > > >>> - mapfd = map_parse_fd(&argc, &argv); > >>> - if (mapfd < 0) > >>> - return mapfd; > >>> + mapfd = map_parse_fd(&argc, &argv); > >>> + if (mapfd < 0) > >>> + return mapfd; > >>> + } > >>> err = bpf_prog_detach2(progfd, mapfd, attach_type); > >>> if (err) { > >>> @@ -792,15 +807,16 @@ static int do_detach(int argc, char **argv) > >>> jsonw_null(json_wtr); > >>> return 0; > >>> } > >>> -static int do_load(int argc, char **argv) > >>> + > >>> +static int load_with_options(int argc, char **argv, bool first_prog_only) > >>> { > >>> enum bpf_attach_type expected_attach_type; > >>> struct bpf_object_open_attr attr = { > >>> .prog_type = BPF_PROG_TYPE_UNSPEC, > >>> }; > >>> struct map_replace *map_replace = NULL; > >>> + struct bpf_program *prog = NULL, *pos; > >>> unsigned int old_map_fds = 0; > >>> - struct bpf_program *prog; > >>> struct bpf_object *obj; > >>> struct bpf_map *map; > >>> const char *pinfile; > >>> @@ -918,14 +934,20 @@ static int do_load(int argc, char **argv) > >>> goto err_free_reuse_maps; > >>> } > >>> - prog = bpf_program__next(NULL, obj); > >>> - if (!prog) { > >>> - p_err("object file doesn't contain any bpf program"); > >>> - goto err_close_obj; > >>> + if (first_prog_only) { > >>> + prog = bpf_program__next(NULL, obj); > >>> + if (!prog) { > >>> + p_err("object file doesn't contain any bpf program"); > >>> + goto err_close_obj; > >>> + } > >>> } > >>> - bpf_program__set_ifindex(prog, ifindex); > >>> if (attr.prog_type == BPF_PROG_TYPE_UNSPEC) { > >>> + if (!prog) { > >>> + p_err("can not guess program type when loading all programs\n"); > >>> + goto err_close_obj; > >>> + } > >>> + > >>> const char *sec_name = bpf_program__title(prog, false); > >>> err = libbpf_prog_type_by_name(sec_name, &attr.prog_type, > >>> @@ -936,8 +958,13 @@ static int do_load(int argc, char **argv) > >>> goto err_close_obj; > >>> } > >>> } > >>> - bpf_program__set_type(prog, attr.prog_type); > >>> - bpf_program__set_expected_attach_type(prog, expected_attach_type); > >>> + > >>> + bpf_object__for_each_program(pos, obj) { > >>> + bpf_program__set_ifindex(pos, ifindex); > >>> + bpf_program__set_type(pos, attr.prog_type); > >>> + bpf_program__set_expected_attach_type(pos, > >>> + expected_attach_type); > >>> + } > >> > >> I still believe you can have programs of different types here, and be able > >> to load them. I tried it and managed to have it working fine. If no type is > >> provided from command line we can retrieve types for each program from its > >> section name. If a type is provided on the command line, we can do the same, > >> but I am not sure we should do it, or impose that type for all programs > >> instead. > > I can move auto-detection into this new bpf_object__for_each_program > > loop. So if no type is specified, try to infer the type from each prog > > section name, otherwise, use the provided one for all progs. Do we want > > something like that? > > This is what I have in mind. But others may disagree. Hm, I did another look and here is the problem. Current **load** implementation actually loads all progs (and maps) from the file: do_load -> bpf_object__load -> bpf_object__load_progs. It pins only the first prog, but loads them all. That's why I don't understand how multiprog loading can work currently (because we don't set correct prog_type/expected_attach_type for all progs, only the first one). Should we have the following functionality instead: Both **load** and **loadall** load all maps and programs from the *OBJ* and differ only in pinning. **load** pins only the first program from the *OBJ* as *FILE*. **loadall** pins all programs and maps from the *OBJ* under *FILE* directory. If we want **load** to load only the first prog, we should probably amend bpf_object__load to be able to filter the progs we (don't) want. Thoughts? > > Btw, do you have some existing real life example of where it's needed so > > I can test this new implementation? (maybe something under samples/ ?) > > I thought about an ELF file containing both an XDP and a TC classifier > program for example. XDP can mark programs for TC, then TC process them > with all the facilities we have for skbs. It does not _have_ to be in > the same ELF file, but could be. > > I haven't searched samples/bpf/ in depth, but a grep on SEC shows a > couple of files with several types (kprobe/kretprobe, classifier/xdp). > samples/bpf/xdp2skb_meta_kern.c looks like a good candidate. Or actually > for testing purposes, I simply used the following: > > #define SEC(NAME) __attribute__((section(NAME), used)) > > int _version SEC("version") = 1; > > SEC("classifier") > int func() > { > return 1; > } > > SEC("xdp") > int funcbar() > { > return 0; > } Thanks, I just found socket_cookie_prog.c in selftests which has cgroup/connect6 and sockops sections, I can probably use that for testing. > >>> qsort(map_replace, old_map_fds, sizeof(*map_replace), > >>> map_replace_compar); > >>> @@ -1001,9 +1028,25 @@ static int do_load(int argc, char **argv) > >>> goto err_close_obj; > >>> } > >>> - if (do_pin_fd(bpf_program__fd(prog), pinfile)) > >>> + err = mount_bpffs_for_pin(pinfile); > >>> + if (err) > >>> goto err_close_obj; > >>> + if (prog) { > >> > >> Nit: Maybe "if (first_prog_only) {" instead? If I understand correctly, at > >> this stage it should be equivalent, but in my opinion it would make it > >> easier to understand why we have two cases here. > > Sure, I can do that if you think that's more readable, I don't have a > > preference. > > Thanks! > Quentin >
On Thu, 8 Nov 2018 18:21:24 +0000, Quentin Monnet wrote: > >>> @@ -79,8 +82,11 @@ DESCRIPTION > >>> contain a dot character ('.'), which is reserved for future > >>> extensions of *bpffs*. > >>> - **bpftool prog load** *OBJ* *FILE* [**type** *TYPE*] [**map** {**idx** *IDX* | **name** *NAME*} *MAP*] [**dev** *NAME*] > >>> + **bpftool prog { load | loadall }** *OBJ* *FILE* [**type** *TYPE*] [**map** {**idx** *IDX* | **name** *NAME*} *MAP*] [**dev** *NAME*] > >>> Load bpf program from binary *OBJ* and pin as *FILE*. > >>> + **bpftool prog load** will pin only the first bpf program > >>> + from the *OBJ*, **bpftool prog loadall** will pin all maps > >>> + and programs from the *OBJ*. > >> > >> This could be improved regarding maps: with "bpftool prog load" I think we > >> also load and pin all maps, but your description implies this is only the > >> case with "loadall" > > I don't think we pin any maps with `bpftool prog load`, we certainly load > > them, but we don't pin any afaict. Can you point me to the code where we > > pin the maps? > > > > My bad. I read "pin" but thought "load". It does not pin them indeed, > sorry about that. Right, but I don't see much reason why prog loadall should pin maps. The reason to pin program(s) is to hold some reference and to be able to find them. Since we have the programs pinned we should be able to find their maps with relative ease. $ bpftool prog show pinned /sys/fs/bpf/prog 7: cgroup_skb tag 2a142ef67aaad174 gpl loaded_at 2018-11-08T11:02:25-0800 uid 0 xlated 296B jited 229B memlock 4096B map_ids 6,7 possibly: $ bpftool -j prog show pinned /sys/fs/bpf/prog | jq '.map_ids[0]' 6 Moreover, I think program and map names may collide making ELFs unloadable..
On Thu, 8 Nov 2018 11:16:43 +0000, Quentin Monnet wrote: > > - bpf_program__set_ifindex(prog, ifindex); > > if (attr.prog_type == BPF_PROG_TYPE_UNSPEC) { > > + if (!prog) { > > + p_err("can not guess program type when loading all programs\n"); No new lines in p_err(), beaks JSON. > > + goto err_close_obj; > > + } > > + > > const char *sec_name = bpf_program__title(prog, false); > > > > err = libbpf_prog_type_by_name(sec_name, &attr.prog_type, > > @@ -936,8 +958,13 @@ static int do_load(int argc, char **argv) > > goto err_close_obj; > > } > > } > > - bpf_program__set_type(prog, attr.prog_type); > > - bpf_program__set_expected_attach_type(prog, expected_attach_type); > > + > > + bpf_object__for_each_program(pos, obj) { > > + bpf_program__set_ifindex(pos, ifindex); > > + bpf_program__set_type(pos, attr.prog_type); > > + bpf_program__set_expected_attach_type(pos, > > + expected_attach_type); > > + } > > I still believe you can have programs of different types here, and be > able to load them. I tried it and managed to have it working fine. If no > type is provided from command line we can retrieve types for each > program from its section name. If a type is provided on the command > line, we can do the same, but I am not sure we should do it, or impose > that type for all programs instead. attr->prog_type is one per object, though. How do we set that one?
On Wed, 7 Nov 2018 21:39:57 -0800, Stanislav Fomichev wrote: > This commit adds support for loading/attaching/detaching flow > dissector program. The structure of the flow dissector program is > assumed to be the same as in the selftests: > > * flow_dissector section with the main entry point > * a bunch of tail call progs > * a jmp_table map that is populated with the tail call progs Could you split the loadall changes and the flow_dissector changes into two separate patches?
On 11/08, Jakub Kicinski wrote: > On Thu, 8 Nov 2018 18:21:24 +0000, Quentin Monnet wrote: > > >>> @@ -79,8 +82,11 @@ DESCRIPTION > > >>> contain a dot character ('.'), which is reserved for future > > >>> extensions of *bpffs*. > > >>> - **bpftool prog load** *OBJ* *FILE* [**type** *TYPE*] [**map** {**idx** *IDX* | **name** *NAME*} *MAP*] [**dev** *NAME*] > > >>> + **bpftool prog { load | loadall }** *OBJ* *FILE* [**type** *TYPE*] [**map** {**idx** *IDX* | **name** *NAME*} *MAP*] [**dev** *NAME*] > > >>> Load bpf program from binary *OBJ* and pin as *FILE*. > > >>> + **bpftool prog load** will pin only the first bpf program > > >>> + from the *OBJ*, **bpftool prog loadall** will pin all maps > > >>> + and programs from the *OBJ*. > > >> > > >> This could be improved regarding maps: with "bpftool prog load" I think we > > >> also load and pin all maps, but your description implies this is only the > > >> case with "loadall" > > > I don't think we pin any maps with `bpftool prog load`, we certainly load > > > them, but we don't pin any afaict. Can you point me to the code where we > > > pin the maps? > > > > > > > My bad. I read "pin" but thought "load". It does not pin them indeed, > > sorry about that. > > Right, but I don't see much reason why prog loadall should pin maps. It does seem convenient to have an option to pin everything, so we don't require anything else to find the ids of the maps. If we are pinning all progs, might as well pin the maps, why not? See my example in the commit message, for example, where I just hard code the expected map name. Convenient :-) > The reason to pin program(s) is to hold some reference and to be able > to find them. Since we have the programs pinned we should be able to > find their maps with relative ease. > > $ bpftool prog show pinned /sys/fs/bpf/prog > 7: cgroup_skb tag 2a142ef67aaad174 gpl > loaded_at 2018-11-08T11:02:25-0800 uid 0 > xlated 296B jited 229B memlock 4096B map_ids 6,7 > > possibly: > > $ bpftool -j prog show pinned /sys/fs/bpf/prog | jq '.map_ids[0]' > 6 > > Moreover, I think program and map names may collide making ELFs > unloadable.. It doesn't sound like a big problem, sounds like a constraint we can live with.
On 11/08, Jakub Kicinski wrote: > On Thu, 8 Nov 2018 11:16:43 +0000, Quentin Monnet wrote: > > > - bpf_program__set_ifindex(prog, ifindex); > > > if (attr.prog_type == BPF_PROG_TYPE_UNSPEC) { > > > + if (!prog) { > > > + p_err("can not guess program type when loading all programs\n"); > > No new lines in p_err(), beaks JSON. Thanks, I'll probably remove that altogether and do auto inference of prog_type from the section name here. > > > + goto err_close_obj; > > > + } > > > + > > > const char *sec_name = bpf_program__title(prog, false); > > > > > > err = libbpf_prog_type_by_name(sec_name, &attr.prog_type, > > > @@ -936,8 +958,13 @@ static int do_load(int argc, char **argv) > > > goto err_close_obj; > > > } > > > } > > > - bpf_program__set_type(prog, attr.prog_type); > > > - bpf_program__set_expected_attach_type(prog, expected_attach_type); > > > + > > > + bpf_object__for_each_program(pos, obj) { > > > + bpf_program__set_ifindex(pos, ifindex); > > > + bpf_program__set_type(pos, attr.prog_type); > > > + bpf_program__set_expected_attach_type(pos, > > > + expected_attach_type); > > > + } > > > > I still believe you can have programs of different types here, and be > > able to load them. I tried it and managed to have it working fine. If no > > type is provided from command line we can retrieve types for each > > program from its section name. If a type is provided on the command > > line, we can do the same, but I am not sure we should do it, or impose > > that type for all programs instead. > > attr->prog_type is one per object, though. How do we set that one? Isn't it used only in __bpf_object__open_xattr to require/not-require kernel version in the bpf prog? It will probably work quite nicely for both of our options: * type not specified: prog_type = BPF_PROG_TYPE_UNSPEC, need kernel version (over cautious?) * type specified (and applied to all progs): using bpf_prog_type__needs_kver to require/not requqire kernel version
On 11/08, Jakub Kicinski wrote: > On Wed, 7 Nov 2018 21:39:57 -0800, Stanislav Fomichev wrote: > > This commit adds support for loading/attaching/detaching flow > > dissector program. The structure of the flow dissector program is > > assumed to be the same as in the selftests: > > > > * flow_dissector section with the main entry point > > * a bunch of tail call progs > > * a jmp_table map that is populated with the tail call progs > > Could you split the loadall changes and the flow_dissector changes into > two separate patches? Sure, will do, but let's first agree on the semantical differences of load vs loadall. So far *load* actually loads _all_ progs (via bpf_object__load), but pins only the first program. Is that what we want? I wonder whether the assumption there was that there is only single program in the object. Should we load only the first program in *load*? If we add *loadall*, then the difference would be: *load*: * loads all maps and only the first program, pins only the first program *loadall*: * loads all maps and all programs, pins everything (maps and programs) Is this the expected behavior?
On Thu, 8 Nov 2018 13:20:12 -0800, Stanislav Fomichev wrote: > On 11/08, Jakub Kicinski wrote: > > On Thu, 8 Nov 2018 18:21:24 +0000, Quentin Monnet wrote: > > > >>> @@ -79,8 +82,11 @@ DESCRIPTION > > > >>> contain a dot character ('.'), which is reserved for future > > > >>> extensions of *bpffs*. > > > >>> - **bpftool prog load** *OBJ* *FILE* [**type** *TYPE*] [**map** {**idx** *IDX* | **name** *NAME*} *MAP*] [**dev** *NAME*] > > > >>> + **bpftool prog { load | loadall }** *OBJ* *FILE* [**type** *TYPE*] [**map** {**idx** *IDX* | **name** *NAME*} *MAP*] [**dev** *NAME*] > > > >>> Load bpf program from binary *OBJ* and pin as *FILE*. > > > >>> + **bpftool prog load** will pin only the first bpf program > > > >>> + from the *OBJ*, **bpftool prog loadall** will pin all maps > > > >>> + and programs from the *OBJ*. > > > >> > > > >> This could be improved regarding maps: with "bpftool prog load" I think we > > > >> also load and pin all maps, but your description implies this is only the > > > >> case with "loadall" > > > > I don't think we pin any maps with `bpftool prog load`, we certainly load > > > > them, but we don't pin any afaict. Can you point me to the code where we > > > > pin the maps? > > > > > > > > > > My bad. I read "pin" but thought "load". It does not pin them indeed, > > > sorry about that. > > > > Right, but I don't see much reason why prog loadall should pin maps. > It does seem convenient to have an option to pin everything, so we > don't require anything else to find the ids of the maps. > If we are pinning all progs, might as well pin the maps, why not? See > my example in the commit message, for example, where I just hard code > the expected map name. Convenient :-) Sure. I can see how its convenient to your use case. A lot of people will be very used to finding out the maps because if program is loaded with iproute2 tools neither programs nor maps get pinned. Please add a "pinmaps MAP_DIR" optional parameter as a separate patch. > > The reason to pin program(s) is to hold some reference and to be able > > to find them. Since we have the programs pinned we should be able to > > find their maps with relative ease. > > > > $ bpftool prog show pinned /sys/fs/bpf/prog > > 7: cgroup_skb tag 2a142ef67aaad174 gpl > > loaded_at 2018-11-08T11:02:25-0800 uid 0 > > xlated 296B jited 229B memlock 4096B map_ids 6,7 > > > > possibly: > > > > $ bpftool -j prog show pinned /sys/fs/bpf/prog | jq '.map_ids[0]' > > 6 > > > > Moreover, I think program and map names may collide making ELFs > > unloadable.. > It doesn't sound like a big problem, sounds like a constraint we can live > with.
On Thu, 8 Nov 2018 13:25:39 -0800, Stanislav Fomichev wrote: > > > > + goto err_close_obj; > > > > + } > > > > + > > > > const char *sec_name = bpf_program__title(prog, false); > > > > > > > > err = libbpf_prog_type_by_name(sec_name, &attr.prog_type, > > > > @@ -936,8 +958,13 @@ static int do_load(int argc, char **argv) > > > > goto err_close_obj; > > > > } > > > > } > > > > - bpf_program__set_type(prog, attr.prog_type); > > > > - bpf_program__set_expected_attach_type(prog, expected_attach_type); > > > > + > > > > + bpf_object__for_each_program(pos, obj) { > > > > + bpf_program__set_ifindex(pos, ifindex); > > > > + bpf_program__set_type(pos, attr.prog_type); > > > > + bpf_program__set_expected_attach_type(pos, > > > > + expected_attach_type); > > > > + } > > > > > > I still believe you can have programs of different types here, and be > > > able to load them. I tried it and managed to have it working fine. If no > > > type is provided from command line we can retrieve types for each > > > program from its section name. If a type is provided on the command > > > line, we can do the same, but I am not sure we should do it, or impose > > > that type for all programs instead. > > > > attr->prog_type is one per object, though. How do we set that one? > Isn't it used only in __bpf_object__open_xattr to require/not-require kernel > version in the bpf prog? > > It will probably work quite nicely for both of our options: > > * type not specified: prog_type = BPF_PROG_TYPE_UNSPEC, need kernel > version (over cautious?) > * type specified (and applied to all progs): using bpf_prog_type__needs_kver > to require/not requqire kernel version Right, but they you can't infer it from the program name, since there's multiple.
On Thu, 8 Nov 2018 13:29:40 -0800, Stanislav Fomichev wrote: > On 11/08, Jakub Kicinski wrote: > > On Wed, 7 Nov 2018 21:39:57 -0800, Stanislav Fomichev wrote: > > > This commit adds support for loading/attaching/detaching flow > > > dissector program. The structure of the flow dissector program is > > > assumed to be the same as in the selftests: > > > > > > * flow_dissector section with the main entry point > > > * a bunch of tail call progs > > > * a jmp_table map that is populated with the tail call progs > > > > Could you split the loadall changes and the flow_dissector changes into > > two separate patches? > Sure, will do, but let's first agree on the semantical differences of > load vs loadall. > > So far *load* actually loads _all_ progs (via bpf_object__load), but pins > only the first program. Is that what we want? I wonder whether the > assumption there was that there is only single program in the object. > Should we load only the first program in *load*? > > If we add *loadall*, then the difference would be: > *load*: > * loads all maps and only the first program, pins only the first > program > *loadall*: > * loads all maps and all programs, pins everything (maps and programs) > > Is this the expected behavior? Loading all programs and maps for "load" is just a libbpf limitation we can remove at some point.
diff --git a/tools/bpf/bpftool/Documentation/bpftool-prog.rst b/tools/bpf/bpftool/Documentation/bpftool-prog.rst index ac4e904b10fb..0374634c3087 100644 --- a/tools/bpf/bpftool/Documentation/bpftool-prog.rst +++ b/tools/bpf/bpftool/Documentation/bpftool-prog.rst @@ -15,7 +15,8 @@ SYNOPSIS *OPTIONS* := { { **-j** | **--json** } [{ **-p** | **--pretty** }] | { **-f** | **--bpffs** } } *COMMANDS* := - { **show** | **list** | **dump xlated** | **dump jited** | **pin** | **load** | **help** } + { **show** | **list** | **dump xlated** | **dump jited** | **pin** | **load** + | **loadall** | **help** } MAP COMMANDS ============= @@ -24,9 +25,9 @@ MAP COMMANDS | **bpftool** **prog dump xlated** *PROG* [{**file** *FILE* | **opcodes** | **visual**}] | **bpftool** **prog dump jited** *PROG* [{**file** *FILE* | **opcodes**}] | **bpftool** **prog pin** *PROG* *FILE* -| **bpftool** **prog load** *OBJ* *FILE* [**type** *TYPE*] [**map** {**idx** *IDX* | **name** *NAME*} *MAP*] [**dev** *NAME*] -| **bpftool** **prog attach** *PROG* *ATTACH_TYPE* *MAP* -| **bpftool** **prog detach** *PROG* *ATTACH_TYPE* *MAP* +| **bpftool** **prog { load | loadall }** *OBJ* *FILE* [**type** *TYPE*] [**map** {**idx** *IDX* | **name** *NAME*} *MAP*] [**dev** *NAME*] +| **bpftool** **prog attach** *PROG* *ATTACH_TYPE* [*MAP*] +| **bpftool** **prog detach** *PROG* *ATTACH_TYPE* [*MAP*] | **bpftool** **prog help** | | *MAP* := { **id** *MAP_ID* | **pinned** *FILE* } @@ -39,7 +40,9 @@ MAP COMMANDS | **cgroup/bind4** | **cgroup/bind6** | **cgroup/post_bind4** | **cgroup/post_bind6** | | **cgroup/connect4** | **cgroup/connect6** | **cgroup/sendmsg4** | **cgroup/sendmsg6** | } -| *ATTACH_TYPE* := { **msg_verdict** | **skb_verdict** | **skb_parse** } +| *ATTACH_TYPE* := { +| **msg_verdict** | **skb_verdict** | **skb_parse** | **flow_dissector** +| } DESCRIPTION @@ -79,8 +82,11 @@ DESCRIPTION contain a dot character ('.'), which is reserved for future extensions of *bpffs*. - **bpftool prog load** *OBJ* *FILE* [**type** *TYPE*] [**map** {**idx** *IDX* | **name** *NAME*} *MAP*] [**dev** *NAME*] + **bpftool prog { load | loadall }** *OBJ* *FILE* [**type** *TYPE*] [**map** {**idx** *IDX* | **name** *NAME*} *MAP*] [**dev** *NAME*] Load bpf program from binary *OBJ* and pin as *FILE*. + **bpftool prog load** will pin only the first bpf program + from the *OBJ*, **bpftool prog loadall** will pin all maps + and programs from the *OBJ*. **type** is optional, if not specified program type will be inferred from section names. By default bpftool will create new maps as declared in the ELF @@ -97,13 +103,17 @@ DESCRIPTION contain a dot character ('.'), which is reserved for future extensions of *bpffs*. - **bpftool prog attach** *PROG* *ATTACH_TYPE* *MAP* - Attach bpf program *PROG* (with type specified by *ATTACH_TYPE*) - to the map *MAP*. - - **bpftool prog detach** *PROG* *ATTACH_TYPE* *MAP* - Detach bpf program *PROG* (with type specified by *ATTACH_TYPE*) - from the map *MAP*. + **bpftool prog attach** *PROG* *ATTACH_TYPE* [*MAP*] + Attach bpf program *PROG* (with type specified by + *ATTACH_TYPE*). Most *ATTACH_TYPEs* require a *MAP* + parameter, with the exception of *flow_dissector* which is + attached to current networking name space. + + **bpftool prog detach** *PROG* *ATTACH_TYPE* [*MAP*] + Detach bpf program *PROG* (with type specified by + *ATTACH_TYPE*). Most *ATTACH_TYPEs* require a *MAP* + parameter, with the exception of *flow_dissector* which is + detached from the current networking name space. **bpftool prog help** Print short help message. diff --git a/tools/bpf/bpftool/bash-completion/bpftool b/tools/bpf/bpftool/bash-completion/bpftool index 3f78e6404589..ad0fc919f7ec 100644 --- a/tools/bpf/bpftool/bash-completion/bpftool +++ b/tools/bpf/bpftool/bash-completion/bpftool @@ -243,7 +243,7 @@ _bpftool() # Completion depends on object and command in use case $object in prog) - if [[ $command != "load" ]]; then + if [[ $command != "load" && $command != "loadall" ]]; then case $prev in id) _bpftool_get_prog_ids @@ -299,7 +299,7 @@ _bpftool() fi if [[ ${#words[@]} == 6 ]]; then - COMPREPLY=( $( compgen -W "msg_verdict skb_verdict skb_parse" -- "$cur" ) ) + COMPREPLY=( $( compgen -W "msg_verdict skb_verdict skb_parse flow_dissector" -- "$cur" ) ) return 0 fi @@ -309,7 +309,7 @@ _bpftool() fi return 0 ;; - load) + load|loadall) local obj if [[ ${#words[@]} -lt 6 ]]; then diff --git a/tools/bpf/bpftool/common.c b/tools/bpf/bpftool/common.c index 25af85304ebe..f671a921dec5 100644 --- a/tools/bpf/bpftool/common.c +++ b/tools/bpf/bpftool/common.c @@ -169,34 +169,24 @@ int open_obj_pinned_any(char *path, enum bpf_obj_type exp_type) return fd; } -int do_pin_fd(int fd, const char *name) +int mount_bpffs_for_pin(const char *name) { char err_str[ERR_MAX_LEN]; char *file; char *dir; int err = 0; - err = bpf_obj_pin(fd, name); - if (!err) - goto out; - file = malloc(strlen(name) + 1); strcpy(file, name); dir = dirname(file); - if (errno != EPERM || is_bpffs(dir)) { - p_err("can't pin the object (%s): %s", name, strerror(errno)); + if (is_bpffs(dir)) { + /* nothing to do if already mounted */ goto out_free; } - /* Attempt to mount bpffs, then retry pinning. */ err = mnt_bpffs(dir, err_str, ERR_MAX_LEN); - if (!err) { - err = bpf_obj_pin(fd, name); - if (err) - p_err("can't pin the object (%s): %s", name, - strerror(errno)); - } else { + if (err) { err_str[ERR_MAX_LEN - 1] = '\0'; p_err("can't mount BPF file system to pin the object (%s): %s", name, err_str); @@ -204,10 +194,20 @@ int do_pin_fd(int fd, const char *name) out_free: free(file); -out: return err; } +int do_pin_fd(int fd, const char *name) +{ + int err; + + err = mount_bpffs_for_pin(name); + if (err) + return err; + + return bpf_obj_pin(fd, name); +} + int do_pin_any(int argc, char **argv, int (*get_fd_by_id)(__u32)) { unsigned int id; diff --git a/tools/bpf/bpftool/main.h b/tools/bpf/bpftool/main.h index 28322ace2856..1383824c9baf 100644 --- a/tools/bpf/bpftool/main.h +++ b/tools/bpf/bpftool/main.h @@ -129,6 +129,7 @@ const char *get_fd_type_name(enum bpf_obj_type type); char *get_fdinfo(int fd, const char *key); int open_obj_pinned(char *path); int open_obj_pinned_any(char *path, enum bpf_obj_type exp_type); +int mount_bpffs_for_pin(const char *name); int do_pin_any(int argc, char **argv, int (*get_fd_by_id)(__u32)); int do_pin_fd(int fd, const char *name); diff --git a/tools/bpf/bpftool/prog.c b/tools/bpf/bpftool/prog.c index 5302ee282409..a4346dd673b1 100644 --- a/tools/bpf/bpftool/prog.c +++ b/tools/bpf/bpftool/prog.c @@ -81,6 +81,7 @@ static const char * const attach_type_strings[] = { [BPF_SK_SKB_STREAM_PARSER] = "stream_parser", [BPF_SK_SKB_STREAM_VERDICT] = "stream_verdict", [BPF_SK_MSG_VERDICT] = "msg_verdict", + [BPF_FLOW_DISSECTOR] = "flow_dissector", [__MAX_BPF_ATTACH_TYPE] = NULL, }; @@ -724,10 +725,11 @@ int map_replace_compar(const void *p1, const void *p2) static int do_attach(int argc, char **argv) { enum bpf_attach_type attach_type; - int err, mapfd, progfd; + int err, progfd; + int mapfd = 0; - if (!REQ_ARGS(5)) { - p_err("too few parameters for map attach"); + if (!REQ_ARGS(3)) { + p_err("too few parameters for attach"); return -EINVAL; } @@ -740,11 +742,17 @@ static int do_attach(int argc, char **argv) p_err("invalid attach type"); return -EINVAL; } - NEXT_ARG(); + if (attach_type != BPF_FLOW_DISSECTOR) { + NEXT_ARG(); + if (!REQ_ARGS(2)) { + p_err("too few parameters for map attach"); + return -EINVAL; + } - mapfd = map_parse_fd(&argc, &argv); - if (mapfd < 0) - return mapfd; + mapfd = map_parse_fd(&argc, &argv); + if (mapfd < 0) + return mapfd; + } err = bpf_prog_attach(progfd, mapfd, attach_type, 0); if (err) { @@ -760,10 +768,11 @@ static int do_attach(int argc, char **argv) static int do_detach(int argc, char **argv) { enum bpf_attach_type attach_type; - int err, mapfd, progfd; + int err, progfd; + int mapfd = 0; - if (!REQ_ARGS(5)) { - p_err("too few parameters for map detach"); + if (!REQ_ARGS(3)) { + p_err("too few parameters for detach"); return -EINVAL; } @@ -776,11 +785,17 @@ static int do_detach(int argc, char **argv) p_err("invalid attach type"); return -EINVAL; } - NEXT_ARG(); + if (attach_type != BPF_FLOW_DISSECTOR) { + NEXT_ARG(); + if (!REQ_ARGS(2)) { + p_err("too few parameters for map detach"); + return -EINVAL; + } - mapfd = map_parse_fd(&argc, &argv); - if (mapfd < 0) - return mapfd; + mapfd = map_parse_fd(&argc, &argv); + if (mapfd < 0) + return mapfd; + } err = bpf_prog_detach2(progfd, mapfd, attach_type); if (err) { @@ -792,15 +807,16 @@ static int do_detach(int argc, char **argv) jsonw_null(json_wtr); return 0; } -static int do_load(int argc, char **argv) + +static int load_with_options(int argc, char **argv, bool first_prog_only) { enum bpf_attach_type expected_attach_type; struct bpf_object_open_attr attr = { .prog_type = BPF_PROG_TYPE_UNSPEC, }; struct map_replace *map_replace = NULL; + struct bpf_program *prog = NULL, *pos; unsigned int old_map_fds = 0; - struct bpf_program *prog; struct bpf_object *obj; struct bpf_map *map; const char *pinfile; @@ -918,14 +934,20 @@ static int do_load(int argc, char **argv) goto err_free_reuse_maps; } - prog = bpf_program__next(NULL, obj); - if (!prog) { - p_err("object file doesn't contain any bpf program"); - goto err_close_obj; + if (first_prog_only) { + prog = bpf_program__next(NULL, obj); + if (!prog) { + p_err("object file doesn't contain any bpf program"); + goto err_close_obj; + } } - bpf_program__set_ifindex(prog, ifindex); if (attr.prog_type == BPF_PROG_TYPE_UNSPEC) { + if (!prog) { + p_err("can not guess program type when loading all programs\n"); + goto err_close_obj; + } + const char *sec_name = bpf_program__title(prog, false); err = libbpf_prog_type_by_name(sec_name, &attr.prog_type, @@ -936,8 +958,13 @@ static int do_load(int argc, char **argv) goto err_close_obj; } } - bpf_program__set_type(prog, attr.prog_type); - bpf_program__set_expected_attach_type(prog, expected_attach_type); + + bpf_object__for_each_program(pos, obj) { + bpf_program__set_ifindex(pos, ifindex); + bpf_program__set_type(pos, attr.prog_type); + bpf_program__set_expected_attach_type(pos, + expected_attach_type); + } qsort(map_replace, old_map_fds, sizeof(*map_replace), map_replace_compar); @@ -1001,9 +1028,25 @@ static int do_load(int argc, char **argv) goto err_close_obj; } - if (do_pin_fd(bpf_program__fd(prog), pinfile)) + err = mount_bpffs_for_pin(pinfile); + if (err) goto err_close_obj; + if (prog) { + err = bpf_obj_pin(bpf_program__fd(prog), pinfile); + if (err) { + p_err("failed to pin program %s", + bpf_program__title(prog, false)); + goto err_close_obj; + } + } else { + err = bpf_object__pin(obj, pinfile); + if (err) { + p_err("failed to pin all programs"); + goto err_close_obj; + } + } + if (json_output) jsonw_null(json_wtr); @@ -1023,6 +1066,16 @@ static int do_load(int argc, char **argv) return -1; } +static int do_load(int argc, char **argv) +{ + return load_with_options(argc, argv, true); +} + +static int do_loadall(int argc, char **argv) +{ + return load_with_options(argc, argv, false); +} + static int do_help(int argc, char **argv) { if (json_output) { @@ -1035,10 +1088,11 @@ static int do_help(int argc, char **argv) " %s %s dump xlated PROG [{ file FILE | opcodes | visual }]\n" " %s %s dump jited PROG [{ file FILE | opcodes }]\n" " %s %s pin PROG FILE\n" - " %s %s load OBJ FILE [type TYPE] [dev NAME] \\\n" + " %s %s { load | loadall } OBJ FILE \\\n" + " [type TYPE] [dev NAME] \\\n" " [map { idx IDX | name NAME } MAP]\n" - " %s %s attach PROG ATTACH_TYPE MAP\n" - " %s %s detach PROG ATTACH_TYPE MAP\n" + " %s %s attach PROG ATTACH_TYPE [MAP]\n" + " %s %s detach PROG ATTACH_TYPE [MAP]\n" " %s %s help\n" "\n" " " HELP_SPEC_MAP "\n" @@ -1050,7 +1104,8 @@ static int do_help(int argc, char **argv) " cgroup/bind4 | cgroup/bind6 | cgroup/post_bind4 |\n" " cgroup/post_bind6 | cgroup/connect4 | cgroup/connect6 |\n" " cgroup/sendmsg4 | cgroup/sendmsg6 }\n" - " ATTACH_TYPE := { msg_verdict | skb_verdict | skb_parse }\n" + " ATTACH_TYPE := { msg_verdict | skb_verdict | skb_parse |\n" + " flow_dissector }\n" " " HELP_SPEC_OPTIONS "\n" "", bin_name, argv[-2], bin_name, argv[-2], bin_name, argv[-2], @@ -1067,6 +1122,7 @@ static const struct cmd cmds[] = { { "dump", do_dump }, { "pin", do_pin }, { "load", do_load }, + { "loadall", do_loadall }, { "attach", do_attach }, { "detach", do_detach }, { 0 }
This commit adds support for loading/attaching/detaching flow dissector program. The structure of the flow dissector program is assumed to be the same as in the selftests: * flow_dissector section with the main entry point * a bunch of tail call progs * a jmp_table map that is populated with the tail call progs When `bpftool load` is called with a flow_dissector prog (i.e. when the first section is flow_dissector of 'type flow_dissector' argument is passed), we load and pin all the programs/maps. User is responsible to construct the jump table for the tail calls. The last argument of `bpftool attach` is made optional for this use case. Example: bpftool prog load tools/testing/selftests/bpf/bpf_flow.o \ /sys/fs/bpf/flow type flow_dissector bpftool map update pinned /sys/fs/bpf/flow/jmp_table \ key 0 0 0 0 \ value pinned /sys/fs/bpf/flow/IP bpftool map update pinned /sys/fs/bpf/flow/jmp_table \ key 1 0 0 0 \ value pinned /sys/fs/bpf/flow/IPV6 bpftool map update pinned /sys/fs/bpf/flow/jmp_table \ key 2 0 0 0 \ value pinned /sys/fs/bpf/flow/IPV6OP bpftool map update pinned /sys/fs/bpf/flow/jmp_table \ key 3 0 0 0 \ value pinned /sys/fs/bpf/flow/IPV6FR bpftool map update pinned /sys/fs/bpf/flow/jmp_table \ key 4 0 0 0 \ value pinned /sys/fs/bpf/flow/MPLS bpftool map update pinned /sys/fs/bpf/flow/jmp_table \ key 5 0 0 0 \ value pinned /sys/fs/bpf/flow/VLAN bpftool prog attach pinned /sys/fs/bpf/flow/flow_dissector flow_dissector Tested by using the above lines to load the prog in the test_flow_dissector.sh selftest. Signed-off-by: Stanislav Fomichev <sdf@google.com> --- .../bpftool/Documentation/bpftool-prog.rst | 36 ++++-- tools/bpf/bpftool/bash-completion/bpftool | 6 +- tools/bpf/bpftool/common.c | 30 ++--- tools/bpf/bpftool/main.h | 1 + tools/bpf/bpftool/prog.c | 112 +++++++++++++----- 5 files changed, 126 insertions(+), 59 deletions(-)