diff mbox series

[v2,3/3] ARM: dts: iwg23s-sbc: Add QSPI flash support

Message ID 1541696684-21235-4-git-send-email-fabrizio.castro@bp.renesas.com (mailing list archive)
State New, archived
Headers show
Series Add QSPI flash support to iwg23s | expand

Commit Message

Fabrizio Castro Nov. 8, 2018, 5:04 p.m. UTC
This commit adds QSPI flash support to the iwg23s board specific
device tree.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>

---
v1->v2:
* No Change

 arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

Comments

Simon Horman Nov. 9, 2018, 10:06 a.m. UTC | #1
On Thu, Nov 08, 2018 at 05:04:43PM +0000, Fabrizio Castro wrote:
> This commit adds QSPI flash support to the iwg23s board specific
> device tree.
> 
> Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>

Thanks,

This looks fine to me but I will wait to see if there are other reviews
before applying.

Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman Nov. 13, 2018, 2:35 p.m. UTC | #2
On Fri, Nov 09, 2018 at 11:06:07AM +0100, Simon Horman wrote:
> On Thu, Nov 08, 2018 at 05:04:43PM +0000, Fabrizio Castro wrote:
> > This commit adds QSPI flash support to the iwg23s board specific
> > device tree.
> > 
> > Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> 
> Thanks,
> 
> This looks fine to me but I will wait to see if there are other reviews
> before applying.

Thanks again,

applied for v4.21.
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
index 52f23b8..40b7f98 100644
--- a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
+++ b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
@@ -96,6 +96,11 @@ 
 		power-source = <1800>;
 	};
 
+	qspi0_pins: qspi0 {
+		groups = "qspi0_ctrl", "qspi0_data2";
+		function = "qspi0";
+	};
+
 	scif1_pins: scif1 {
 		groups = "scif1_data_b";
 		function = "scif1";
@@ -114,6 +119,27 @@ 
 	};
 };
 
+&qspi0 {
+	pinctrl-0 = <&qspi0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	/* WARNING - This device contains the bootloader. Handle with care. */
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "issi,is25lp016d", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <133000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <1>;
+		m25p,fast-read;
+		spi-cpol;
+		spi-cpha;
+	};
+};
+
 &rwdt {
 	timeout-sec = <60>;
 	status = "okay";