@@ -119,6 +119,10 @@ i.MX6q generic board
Required root node properties:
- compatible = "fsl,imx6q";
+i.MX8QXP generic board
+Required root node properties:
+ - compatible = "fsl,imx8qxp";
+
Freescale Vybrid Platform Device Tree Bindings
----------------------------------------------
new file mode 100644
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017~2018 NXP
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/{
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ /* We have 1 clusters with 4 Cortex-A35 cores */
+ A35_0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a35";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ next-level-cache = <&A35_L2>;
+ };
+
+ A35_1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a35";
+ reg = <0x0 0x1>;
+ enable-method = "psci";
+ next-level-cache = <&A35_L2>;
+ };
+
+ A35_2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a35";
+ reg = <0x0 0x2>;
+ enable-method = "psci";
+ next-level-cache = <&A35_L2>;
+ };
+
+ A35_3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a35";
+ reg = <0x0 0x3>;
+ enable-method = "psci";
+ next-level-cache = <&A35_L2>;
+ };
+
+ A35_L2: l2-cache0 {
+ compatible = "cache";
+ };
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+};
new file mode 100644
@@ -0,0 +1,409 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2018 NXP
+ * Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+#include <dt-bindings/clock/imx8qxp-clock.h>
+#include <dt-bindings/firmware/imx/rsrc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/pads-imx8qxp.h>
+
+#include "imx8-ca35.dtsi"
+
+/ {
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ serial0 = &adma_lpuart0;
+ mmc0 = &usdhc1;
+ mmc1 = &usdhc2;
+ mmc2 = &usdhc3;
+ };
+
+ gic: interrupt-controller@51a00000 {
+ compatible = "arm,gic-v3";
+ reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */
+ <0x0 0x51b00000 0 0xc0000>; /* GICR (RD_base + SGI_base) */
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical Non-Secure */
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */
+ };
+
+ xtal32k: clock-xtal32k {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "xtal_32KHz";
+ };
+
+ xtal24m: clock-xtal24m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "xtal_24MHz";
+ };
+
+ scu {
+ compatible = "fsl,imx-scu";
+ mbox-names = "tx0", "tx1", "tx2", "tx3",
+ "rx0", "rx1", "rx2", "rx3";
+ mboxes = <&lsio_mu1 0 0
+ &lsio_mu1 0 1
+ &lsio_mu1 0 2
+ &lsio_mu1 0 3
+ &lsio_mu1 1 0
+ &lsio_mu1 1 1
+ &lsio_mu1 1 2
+ &lsio_mu1 1 3>;
+
+ clk: clock-controller {
+ compatible = "fsl,imx8qxp-clk";
+ #clock-cells = <1>;
+ clocks = <&xtal32k &xtal24m>;
+ clock-names = "xtal_32KHz", "xtal_24Mhz";
+ };
+
+ iomuxc: pinctrl {
+ compatible = "fsl,imx8qxp-iomuxc";
+ };
+
+ pd: imx8qx-pd {
+ compatible = "fsl,imx8qxp-scu-pd";
+ #power-domain-cells = <1>;
+ };
+ };
+
+ adma_subsys: bus@59000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x59000000 0x0 0x59000000 0x2000000>;
+
+ adma_lpcg: clock-controller@59000000 {
+ compatible = "fsl,imx8qxp-lpcg-adma";
+ reg = <0x59000000 0x2000000>;
+ #clock-cells = <1>;
+ };
+
+ adma_lpuart0: serial@5a060000 {
+ compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
+ reg = <0x5a060000 0x1000>;
+ interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ clocks = <&adma_lpcg IMX8QXP_ADMA_LPCG_UART0_BAUD_CLK>;
+ clock-names = "ipg";
+ power-domains = <&pd IMX_SC_R_UART_0>;
+ status = "disabled";
+ };
+
+ adma_i2c0: i2c@5a800000 {
+ compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+ reg = <0x5a800000 0x4000>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ clocks = <&adma_lpcg IMX8QXP_ADMA_LPCG_I2C0_CLK>;
+ clock-names = "per";
+ assigned-clocks = <&clk IMX8QXP_ADMA_I2C0_CLK>;
+ assigned-clock-rates = <24000000>;
+ power-domains = <&pd IMX_SC_R_I2C_0>;
+ status = "disabled";
+ };
+
+ adma_i2c1: i2c@5a810000 {
+ compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+ reg = <0x5a810000 0x4000>;
+ interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ clocks = <&adma_lpcg IMX8QXP_ADMA_LPCG_I2C1_CLK>;
+ clock-names = "per";
+ assigned-clocks = <&clk IMX8QXP_ADMA_I2C1_CLK>;
+ assigned-clock-rates = <24000000>;
+ power-domains = <&pd IMX_SC_R_I2C_1>;
+ status = "disabled";
+ };
+
+ adma_i2c2: i2c@5a820000 {
+ compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+ reg = <0x5a820000 0x4000>;
+ interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ clocks = <&adma_lpcg IMX8QXP_ADMA_LPCG_I2C2_CLK>;
+ clock-names = "per";
+ assigned-clocks = <&clk IMX8QXP_ADMA_I2C2_CLK>;
+ assigned-clock-rates = <24000000>;
+ power-domains = <&pd IMX_SC_R_I2C_2>;
+ status = "disabled";
+ };
+
+ adma_i2c3: i2c@5a830000 {
+ compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+ reg = <0x5a830000 0x4000>;
+ interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ clocks = <&adma_lpcg IMX8QXP_ADMA_LPCG_I2C3_CLK>;
+ clock-names = "per";
+ assigned-clocks = <&clk IMX8QXP_ADMA_I2C3_CLK>;
+ assigned-clock-rates = <24000000>;
+ power-domains = <&pd IMX_SC_R_I2C_3>;
+ status = "disabled";
+ };
+ };
+
+ conn_subsys: bus@5b000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x5b000000 0x0 0x5b000000 0x1000000>;
+
+ conn_lpcg: clock-controller@5b200000 {
+ compatible = "fsl,imx8qxp-lpcg-conn";
+ reg = <0x5b200000 0xb0000>;
+ #clock-cells = <1>;
+ };
+
+ usdhc1: mmc@5b010000 {
+ compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x5b010000 0x10000>;
+ clocks = <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC0_IPG_CLK>,
+ <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC0_PER_CLK>,
+ <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC0_HCLK>;
+ clock-names = "ipg", "per", "ahb";
+ assigned-clocks = <&clk IMX8QXP_CONN_SDHC0_CLK>;
+ assigned-clock-rates = <200000000>;
+ power-domains = <&pd IMX_SC_R_SDHC_0>;
+ status = "disabled";
+ };
+
+ usdhc2: mmc@5b020000 {
+ compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x5b020000 0x10000>;
+ clocks = <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC1_IPG_CLK>,
+ <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC1_PER_CLK>,
+ <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC1_HCLK>;
+ clock-names = "ipg", "per", "ahb";
+ assigned-clocks = <&clk IMX8QXP_CONN_SDHC1_CLK>;
+ assigned-clock-rates = <200000000>;
+ power-domains = <&pd IMX_SC_R_SDHC_1>;
+ fsl,tuning-start-tap = <20>;
+ fsl,tuning-step= <2>;
+ status = "disabled";
+ };
+
+ usdhc3: mmc@5b030000 {
+ compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x5b030000 0x10000>;
+ clocks = <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC2_IPG_CLK>,
+ <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC2_PER_CLK>,
+ <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC2_HCLK>;
+ clock-names = "ipg", "per", "ahb";
+ assigned-clocks = <&clk IMX8QXP_CONN_SDHC2_CLK>;
+ assigned-clock-rates = <200000000>;
+ power-domains = <&pd IMX_SC_R_SDHC_2>;
+ status = "disabled";
+ };
+
+ fec1: ethernet@5b040000 {
+ compatible = "fsl,imx8qxp-fec", "fsl,imx6sx-fec";
+ reg = <0x5b040000 0x10000>;
+ interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&conn_lpcg IMX8QXP_CONN_LPCG_ENET0_IPG_CLK>,
+ <&conn_lpcg IMX8QXP_CONN_LPCG_ENET0_AHB_CLK>,
+ <&conn_lpcg IMX8QXP_CONN_LPCG_ENET0_TX_CLK>,
+ <&conn_lpcg IMX8QXP_CONN_LPCG_ENET0_ROOT_CLK>;
+ clock-names = "ipg", "ahb", "enet_clk_ref", "ptp";
+ fsl,num-tx-queues=<3>;
+ fsl,num-rx-queues=<3>;
+ power-domains = <&pd IMX_SC_R_ENET_0>;
+ status = "disabled";
+ };
+
+ fec2: ethernet@5b050000 {
+ compatible = "fsl,imx8qxp-fec", "fsl,imx6sx-fec";
+ reg = <0x5b050000 0x10000>;
+ interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&conn_lpcg IMX8QXP_CONN_LPCG_ENET1_IPG_CLK>,
+ <&conn_lpcg IMX8QXP_CONN_LPCG_ENET1_AHB_CLK>,
+ <&conn_lpcg IMX8QXP_CONN_LPCG_ENET1_TX_CLK>,
+ <&conn_lpcg IMX8QXP_CONN_LPCG_ENET1_ROOT_CLK>;
+ clock-names = "ipg", "ahb", "enet_clk_ref", "ptp";
+ fsl,num-tx-queues=<3>;
+ fsl,num-rx-queues=<3>;
+ power-domains = <&pd IMX_SC_R_ENET_1>;
+ status = "disabled";
+ };
+ };
+
+ db_subsys: bus@5c000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x5c000000 0x0 0x5c000000 0x1000000>;
+
+ ddr_pmu0: pmu@5c020000 {
+ reg = <0x5c020000 0x10000>;
+ };
+ };
+
+ lsio_subsys: bus@5d000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x5d000000 0x0 0x5d000000 0x1000000>;
+
+ lsio_lpcg: clock-controller@5d400000 {
+ compatible = "fsl,imx8qxp-lpcg-lsio";
+ reg = <0x5d400000 0x400000>;
+ #clock-cells = <1>;
+ };
+
+ lsio_mu0: mailbox@5d1b0000 {
+ compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+ reg = <0x5d1b0000 0x10000>;
+ interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <0>;
+ status = "disabled";
+ };
+
+ lsio_mu1: mailbox@5d1c0000 {
+ compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+ reg = <0x5d1c0000 0x10000>;
+ interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <2>;
+ };
+
+ lsio_mu3: mailbox@5d1e0000 {
+ compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+ reg = <0x5d1e0000 0x10000>;
+ interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <0>;
+ status = "disabled";
+ };
+
+ lsio_mu4: mailbox@5d1f0000 {
+ compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+ reg = <0x5d1f0000 0x10000>;
+ interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <0>;
+ status = "disabled";
+ };
+
+ lsio_gpio0: gpio@5d080000 {
+ compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
+ reg = <0x5d080000 0x10000>;
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ power-domains = <&pd IMX_SC_R_GPIO_0>;
+ };
+
+ lsio_gpio1: gpio@5d090000 {
+ compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
+ reg = <0x5d090000 0x10000>;
+ interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ power-domains = <&pd IMX_SC_R_GPIO_1>;
+ };
+
+ lsio_gpio2: gpio@5d0a0000 {
+ compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
+ reg = <0x5d0a0000 0x10000>;
+ interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ power-domains = <&pd IMX_SC_R_GPIO_2>;
+ };
+
+ lsio_gpio3: gpio@5d0b0000 {
+ compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
+ reg = <0x5d0b0000 0x10000>;
+ interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ power-domains = <&pd IMX_SC_R_GPIO_3>;
+ };
+
+ lsio_gpio4: gpio@5d0c0000 {
+ compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
+ reg = <0x5d0c0000 0x10000>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ power-domains = <&pd IMX_SC_R_GPIO_4>;
+ };
+
+ lsio_gpio5: gpio@5d0d0000 {
+ compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
+ reg = <0x5d0d0000 0x10000>;
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ power-domains = <&pd IMX_SC_R_GPIO_5>;
+ };
+
+ lsio_gpio6: gpio@5d0e0000 {
+ compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
+ reg = <0x5d0e0000 0x10000>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ power-domains = <&pd IMX_SC_R_GPIO_6>;
+ };
+
+ lsio_gpio7: gpio@5d0f0000 {
+ compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
+ reg = <0x5d0f0000 0x10000>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ power-domains = <&pd IMX_SC_R_GPIO_7>;
+ };
+ };
+
+ hsio_subsys: bus@5f000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x5f000000 0x0 0x5f000000 0x1000000>;
+ };
+};