| Message ID | 23da5b1409c3d509c34391bb82863aaf7ff39478.1543321707.git-series.maxime.ripard@bootlin.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | ARM: dts: sunxi: Cleanup DTC warnings | expand |
On Tue, Nov 27, 2018 at 8:47 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote: > > Some GPIO pinctrl nodes cannot be easily removed, because they would also > change the pin configuration, for example to add a pull resistor or change > the current delivered by the pin. > > Those nodes still have underscores and unit-addresses in their node names > in our DTs, so adjust their name to remove the warnings. Use that occasion > to also fix some poorly chosen node-names. > > Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
On Wed, Nov 28, 2018 at 07:51:05PM +0800, Chen-Yu Tsai wrote: > On Tue, Nov 27, 2018 at 8:47 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote: > > > > Some GPIO pinctrl nodes cannot be easily removed, because they would also > > change the pin configuration, for example to add a pull resistor or change > > the current delivered by the pin. > > > > Those nodes still have underscores and unit-addresses in their node names > > in our DTs, so adjust their name to remove the warnings. Use that occasion > > to also fix some poorly chosen node-names. > > > > Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> > > Acked-by: Chen-Yu Tsai <wens@csie.org> Applied, thanks! Maxime
diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/sun6i-a31-colombus.dts index d7a19664bae9..99f25b2d5189 100644 --- a/arch/arm/boot/dts/sun6i-a31-colombus.dts +++ b/arch/arm/boot/dts/sun6i-a31-colombus.dts @@ -122,7 +122,7 @@ }; &pio { - i2c_lcd_pins: i2c_lcd_pin@0 { + i2c_lcd_pins: i2c-lcd-pins { pins = "PA23", "PA24"; function = "gpio_out"; bias-pull-up; diff --git a/arch/arm/boot/dts/sun6i-a31s-primo81.dts b/arch/arm/boot/dts/sun6i-a31s-primo81.dts index 645d405fcfcc..ba378affd497 100644 --- a/arch/arm/boot/dts/sun6i-a31s-primo81.dts +++ b/arch/arm/boot/dts/sun6i-a31s-primo81.dts @@ -154,7 +154,7 @@ }; &pio { - mma8452_int_primo81: mma8452_int_pin@0 { + mma8452_int_primo81: mma8452-int-pin { pins = "PA9"; function = "gpio_in"; bias-pull-up; diff --git a/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi index a506d740dee3..86143de21c22 100644 --- a/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi +++ b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi @@ -74,7 +74,7 @@ }; &pio { - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PA15"; function = "gpio_in"; bias-pull-up;
Some GPIO pinctrl nodes cannot be easily removed, because they would also change the pin configuration, for example to add a pull resistor or change the current delivered by the pin. Those nodes still have underscores and unit-addresses in their node names in our DTs, so adjust their name to remove the warnings. Use that occasion to also fix some poorly chosen node-names. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> --- arch/arm/boot/dts/sun6i-a31-colombus.dts | 2 +- arch/arm/boot/dts/sun6i-a31s-primo81.dts | 2 +- arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-)