| Message ID | a63e38a6c93909fe248ffb52d98d47cb4c16ea81.1543321707.git-series.maxime.ripard@bootlin.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | ARM: dts: sunxi: Cleanup DTC warnings | expand |
On Tue, Nov 27, 2018 at 8:47 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote: > > Some GPIO pinctrl nodes cannot be easily removed, because they would also > change the pin configuration, for example to add a pull resistor or change > the current delivered by the pin. > > Those nodes still have underscores and unit-addresses in their node names > in our DTs, so adjust their name to remove the warnings. Use that occasion > to also fix some poorly chosen node-names. > > Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
diff --git a/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts b/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts index 42726576a6a9..317763069c0a 100644 --- a/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts +++ b/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts @@ -84,7 +84,7 @@ }; &r_pio { - led_pin_d978: led_pin_d978@0 { + led_pin_d978: led-pin { pins = "PL5"; function = "gpio_out"; drive-strength = <20>; diff --git a/arch/arm/boot/dts/sun8i-q8-common.dtsi b/arch/arm/boot/dts/sun8i-q8-common.dtsi index e3ca8a94d690..719ad769b837 100644 --- a/arch/arm/boot/dts/sun8i-q8-common.dtsi +++ b/arch/arm/boot/dts/sun8i-q8-common.dtsi @@ -83,7 +83,7 @@ }; &r_pio { - wifi_pwrseq_pin_q8: wifi_pwrseq_pin@0 { + wifi_pwrseq_pin_q8: wifi-pwrseq-pins { pins = "PL6", "PL7", "PL11"; function = "gpio_in"; bias-pull-up; diff --git a/arch/arm/boot/dts/sun8i-r16-parrot.dts b/arch/arm/boot/dts/sun8i-r16-parrot.dts index 62f53291ff22..85576092f5d9 100644 --- a/arch/arm/boot/dts/sun8i-r16-parrot.dts +++ b/arch/arm/boot/dts/sun8i-r16-parrot.dts @@ -159,7 +159,7 @@ }; &pio { - usb0_id_det: usb0_id_detect_pin@0 { + usb0_id_det: usb0-id-detect-pin { pins = "PD10"; function = "gpio_in"; bias-pull-up; diff --git a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi index 12a2ad67844e..787a3121e179 100644 --- a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi +++ b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi @@ -94,7 +94,7 @@ }; &pio { - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH8"; function = "gpio_in"; bias-pull-up;
Some GPIO pinctrl nodes cannot be easily removed, because they would also change the pin configuration, for example to add a pull resistor or change the current delivered by the pin. Those nodes still have underscores and unit-addresses in their node names in our DTs, so adjust their name to remove the warnings. Use that occasion to also fix some poorly chosen node-names. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> --- arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts | 2 +- arch/arm/boot/dts/sun8i-q8-common.dtsi | 2 +- arch/arm/boot/dts/sun8i-r16-parrot.dts | 2 +- arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-)