mbox series

[GIT,PULL,v2] Renesas ARM Based SoC DT Updates for v4.21

Message ID cover.1543409901.git.horms+renesas@verge.net.au (mailing list archive)
State Not Applicable
Delegated to: Simon Horman
Headers show
Series [GIT,PULL,v2] Renesas ARM Based SoC DT Updates for v4.21 | expand

Pull-request

https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-arm-dt-for-v4.21

Message

Simon Horman Nov. 28, 2018, 1:02 p.m. UTC
Hi Olof, Hi Kevin, Hi Arnd,

Please consider these Renesas ARM based SoC DT updates for v4.21.

I am sending out this pull-request at this time as there are a number
of patches queued up in my arm (32) DT branch and I hope that this
will ease the burden later on in the development cycle. I expect to
send a follow-up pull-request for this branch at the usual pre-rc6 timing.

Changes since v1:
* Correct garbled Reviewed-by tag in
  "[PATCH 01/16] ARM: dts: r9a06g032: Add pinctrl node"

The following changes since commit 651022382c7f8da46cb4872a545ee1da6d097d2a:

  Linux 4.20-rc1 (2018-11-04 15:37:52 -0800)

are available in the git repository at:

  https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-arm-dt-for-v4.21

for you to fetch changes up to 673df60a880f060e3e94920c7b5f7a9ed8aa65f2:

  ARM: dts: r9a06g032: Correct the GIC DT node name (2018-11-28 13:55:30 +0100)

----------------------------------------------------------------
Renesas ARM Based SoC DT Updates for v4.21

* RZ/N1D (r9a06g032) SoC:
  - Correct GIC DT node name
  - Enable pin controller

* RZ/G1C (r8a77470) iWave g23S single board computer
  - Add QSPI flash support
  - Add pinctl support for EtherAVB
  - Enable CMT0 (Renesas R-Car Compare Match Timer)
  - Enable RWDT (Renesas Watchdog Timer)
  - Enable uSD and eMMC support

* RZ/G1C (r8a77470) SoC:
  - Describe USB-DMAC and I2C devices in DT

* R-Mobile A1 (r8a7740), Emma Mobile EV2 (emev2) and
  SH-Mobile AG5 (sh72a0) SoCs:
  - Include SoC name in DTSI

* R-Car H2 (r8a7790) based lager, and
  R-Car M2-W (r8a7791) based koelsch and porter boards:
  - Disable unconnected LVDS encoders

----------------------------------------------------------------
Biju Das (6):
      ARM: dts: r8a77470: Add watchdog support to SoC dtsi
      ARM: dts: iwg23s-sbc: Enable watchdog support
      ARM: dts: r8a77470: Add USB-DMAC device nodes
      ARM: dts: r8a77470: Add CMT SoC specific support
      ARM: dts: iwg23s-sbc: Enable cmt0
      ARM: dts: iwg23s-sbc: Add pinctl support for EtherAVB

Fabrizio Castro (6):
      ARM: dts: r8a77470: Add I2C[0123] support
      ARM: dts: r8a77470: Add SDHI0 support
      ARM: dts: r8a77470: Add SDHI1 support
      ARM: dts: iwg23s-sbc: Add uSD and eMMC support
      ARM: dts: r8a77470: Add QSPI support
      ARM: dts: iwg23s-sbc: Add QSPI flash support

Laurent Pinchart (1):
      ARM: dts: r8a779[01]: Disable unconnected LVDS encoders

Magnus Damm (1):
      ARM: dts: r8a7740, emev2, sh73a0: Include SoC name in DTSI

Phil Edworthy (2):
      ARM: dts: r9a06g032: Add pinctrl node
      ARM: dts: r9a06g032: Correct the GIC DT node name

 arch/arm/boot/dts/emev2.dtsi              |   2 +-
 arch/arm/boot/dts/r8a7740.dtsi            |   2 +-
 arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts | 119 ++++++++++++++++
 arch/arm/boot/dts/r8a77470.dtsi           | 222 +++++++++++++++++++++++++++++-
 arch/arm/boot/dts/r8a7790-lager.dts       |   2 -
 arch/arm/boot/dts/r8a7791-koelsch.dts     |   2 -
 arch/arm/boot/dts/r8a7791-porter.dts      |   2 -
 arch/arm/boot/dts/r9a06g032.dtsi          |  10 +-
 arch/arm/boot/dts/sh73a0.dtsi             |   2 +-
 9 files changed, 352 insertions(+), 11 deletions(-)

Comments

Olof Johansson Nov. 30, 2018, 11:08 p.m. UTC | #1
On Wed, Nov 28, 2018 at 02:02:12PM +0100, Simon Horman wrote:
> Hi Olof, Hi Kevin, Hi Arnd,
> 
> Please consider these Renesas ARM based SoC DT updates for v4.21.
> 
> I am sending out this pull-request at this time as there are a number
> of patches queued up in my arm (32) DT branch and I hope that this
> will ease the burden later on in the development cycle. I expect to
> send a follow-up pull-request for this branch at the usual pre-rc6 timing.
> 
> Changes since v1:
> * Correct garbled Reviewed-by tag in
>   "[PATCH 01/16] ARM: dts: r9a06g032: Add pinctrl node"
> 
> The following changes since commit 651022382c7f8da46cb4872a545ee1da6d097d2a:
> 
>   Linux 4.20-rc1 (2018-11-04 15:37:52 -0800)
> 
> are available in the git repository at:
> 
>   https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-arm-dt-for-v4.21
> 
> for you to fetch changes up to 673df60a880f060e3e94920c7b5f7a9ed8aa65f2:
>   ARM: dts: r9a06g032: Correct the GIC DT node name (2018-11-28 13:55:30 +0100)
> 
> ----------------------------------------------------------------
> Renesas ARM Based SoC DT Updates for v4.21
> 
> * RZ/N1D (r9a06g032) SoC:
>   - Correct GIC DT node name
>   - Enable pin controller
> 
> * RZ/G1C (r8a77470) iWave g23S single board computer
>   - Add QSPI flash support
>   - Add pinctl support for EtherAVB
>   - Enable CMT0 (Renesas R-Car Compare Match Timer)
>   - Enable RWDT (Renesas Watchdog Timer)
>   - Enable uSD and eMMC support
> 
> * RZ/G1C (r8a77470) SoC:
>   - Describe USB-DMAC and I2C devices in DT
> 
> * R-Mobile A1 (r8a7740), Emma Mobile EV2 (emev2) and
>   SH-Mobile AG5 (sh72a0) SoCs:
>   - Include SoC name in DTSI
> 
> * R-Car H2 (r8a7790) based lager, and
>   R-Car M2-W (r8a7791) based koelsch and porter boards:
>   - Disable unconnected LVDS encoders

Hi,

If you revise a previous pull request, please do it as a new tag (and
delete the old one so our pull will fail), or at least please reply to
it so I see a "please don't pull this, I've respun a v2" threaded reply.

No harm done in this case, since you rewrote with the previous tag,
but it made me scratch my head when I saw the previous one and the hash
didn't match the email. ;)


-Olof
Simon Horman Dec. 4, 2018, 1:37 p.m. UTC | #2
On Fri, Nov 30, 2018 at 03:08:26PM -0800, Olof Johansson wrote:
> On Wed, Nov 28, 2018 at 02:02:12PM +0100, Simon Horman wrote:
> > Hi Olof, Hi Kevin, Hi Arnd,
> > 
> > Please consider these Renesas ARM based SoC DT updates for v4.21.
> > 
> > I am sending out this pull-request at this time as there are a number
> > of patches queued up in my arm (32) DT branch and I hope that this
> > will ease the burden later on in the development cycle. I expect to
> > send a follow-up pull-request for this branch at the usual pre-rc6 timing.
> > 
> > Changes since v1:
> > * Correct garbled Reviewed-by tag in
> >   "[PATCH 01/16] ARM: dts: r9a06g032: Add pinctrl node"
> > 
> > The following changes since commit 651022382c7f8da46cb4872a545ee1da6d097d2a:
> > 
> >   Linux 4.20-rc1 (2018-11-04 15:37:52 -0800)
> > 
> > are available in the git repository at:
> > 
> >   https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-arm-dt-for-v4.21
> > 
> > for you to fetch changes up to 673df60a880f060e3e94920c7b5f7a9ed8aa65f2:
> >   ARM: dts: r9a06g032: Correct the GIC DT node name (2018-11-28 13:55:30 +0100)
> > 
> > ----------------------------------------------------------------
> > Renesas ARM Based SoC DT Updates for v4.21
> > 
> > * RZ/N1D (r9a06g032) SoC:
> >   - Correct GIC DT node name
> >   - Enable pin controller
> > 
> > * RZ/G1C (r8a77470) iWave g23S single board computer
> >   - Add QSPI flash support
> >   - Add pinctl support for EtherAVB
> >   - Enable CMT0 (Renesas R-Car Compare Match Timer)
> >   - Enable RWDT (Renesas Watchdog Timer)
> >   - Enable uSD and eMMC support
> > 
> > * RZ/G1C (r8a77470) SoC:
> >   - Describe USB-DMAC and I2C devices in DT
> > 
> > * R-Mobile A1 (r8a7740), Emma Mobile EV2 (emev2) and
> >   SH-Mobile AG5 (sh72a0) SoCs:
> >   - Include SoC name in DTSI
> > 
> > * R-Car H2 (r8a7790) based lager, and
> >   R-Car M2-W (r8a7791) based koelsch and porter boards:
> >   - Disable unconnected LVDS encoders
> 
> Hi,
> 
> If you revise a previous pull request, please do it as a new tag (and
> delete the old one so our pull will fail), or at least please reply to
> it so I see a "please don't pull this, I've respun a v2" threaded reply.
> 
> No harm done in this case, since you rewrote with the previous tag,
> but it made me scratch my head when I saw the previous one and the hash
> didn't match the email. ;)

Thanks Olof,

next time I'll create a new tag.