| Message ID | ab9c8bec-35be-9e01-a567-bc2e4b2bef87@free.fr (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | WIP: UFS on apq8098 | expand |
On 12/3/2018 8:18 AM, Marc Gonzalez wrote: > Hello, > > I'm trying to enable UFS on apq8098. Just wanted to share my progress > so far, in case someone spots any glaring mistakes. Excellent. This was down on my todo list. I'm glad its getting some attention. > > (WIP patch provided at message's end.) > > rpm_smd_clk_probe() runs successfully, and returns 0. > > qcom_qmp_phy_probe() fails: > > [ 0.913707] qcom-qmp-phy 1da7000.phy: Failed to get clk 'ref': -2 > [ 0.913761] qcom-qmp-phy: probe of 1da7000.phy failed with error -2 > > ufs_qcom_probe() also fails (which may be caused by PHY failure) > > [ 2.368486] ufshcd-qcom 1da4000.ufshc: ufshcd_get_vreg: vdd-hba get failed, err=-517 > [ 2.370673] ufshcd-qcom 1da4000.ufshc: Initialization failed > [ 2.412908] ufshcd-qcom 1da4000.ufshc: ufshcd_pltfrm_init() failed -517 > > I'll investigate the PHY init. > > Regards. > > > diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi > index b4276da1fb0d..ad7542f461af 100644 > --- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi > +++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi > @@ -241,3 +241,26 @@ > }; > }; > }; > + > +&ufshc { > + status = "ok"; > + vdd-hba-supply = <&gcc UFS_GDSC>; > + vdd-hba-fixed-regulator; > + vcc-supply = <&vreg_l20a_2p95>; > + vccq-supply = <&vreg_l26a_1p2>; > + vccq2-supply = <&vreg_s4a_1p8>; > + vcc-max-microamp = <750000>; > + vccq-max-microamp = <560000>; > + vccq2-max-microamp = <750000>; > +}; > + > +&ufsphy { > + status = "ok"; > + vdda-phy-supply = <&vreg_l1a_0p875>; > + vdda-pll-supply = <&vreg_l2a_1p2>; > + vddp-ref-clk-supply = <&vreg_l26a_1p2>; > + vdda-phy-max-microamp = <51400>; > + vdda-pll-max-microamp = <14600>; > + vddp-ref-clk-max-microamp = <100>; > + vddp-ref-clk-always-on; > +}; > diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi > index d291b4713c33..10e7b8a55b8a 100644 > --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi > +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi > @@ -264,6 +264,11 @@ > rpm_requests: rpm-requests { > compatible = "qcom,rpm-msm8998"; > qcom,glink-channels = "rpm_requests"; > + > + rpmcc: qcom,rpmcc { > + compatible = "qcom,rpmcc-msm8998"; > + #clock-cells = <1>; > + }; > }; > }; > > @@ -686,5 +691,79 @@ > redistributor-stride = <0x0 0x20000>; > interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; > }; > + > + ufshc: ufshc@1da4000 { > + compatible = "qcom,msm8998-ufshc", "qcom,ufshc", > + "jedec,ufs-2.0"; > + reg = <0x1da4000 0x2500>; > + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; > + phys = <&ufsphy_lanes>; > + phy-names = "ufsphy"; > + lanes-per-direction = <2>; > + power-domains = <&gcc UFS_GDSC>; > + > + clock-names = > + "core_clk", > + "bus_aggr_clk", > + "iface_clk", > + "core_clk_unipro", > + "core_clk_ice", > + "ref_clk", > + "tx_lane0_sync_clk", > + "rx_lane0_sync_clk", > + "rx_lane1_sync_clk"; > + clocks = > + <&gcc GCC_UFS_AXI_CLK>, > + <&gcc GCC_AGGRE1_UFS_AXI_CLK>, > + <&gcc GCC_UFS_AHB_CLK>, > + <&gcc GCC_UFS_UNIPRO_CORE_CLK>, > + <&gcc GCC_UFS_ICE_CORE_CLK>, > + <&rpmcc 0>, > + <&gcc GCC_UFS_TX_SYMBOL_0_CLK>, > + <&gcc GCC_UFS_RX_SYMBOL_0_CLK>, > + <&gcc GCC_UFS_RX_SYMBOL_1_CLK>; > + freq-table-hz = > + <50000000 200000000>, > + <0 0>, > + <0 0>, > + <37500000 150000000>, > + <75000000 300000000>, > + <0 0>, > + <0 0>, > + <0 0>, > + <0 0>; > + > + resets = <&gcc GCC_UFS_BCR>; I dunno how much this factors into your issues, but the resets defined in gcc-msm8998.c are wrong. I'm posting a patch later today. I know this was a problem for me with USB. > + reset-names = "rst"; > + > + status = "disabled"; > + }; > + > + ufsphy: phy@1da7000 { > + compatible = "qcom,sdm845-qmp-ufs-phy"; > + reg = <0x1da7000 0x18c>; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + clock-names = > + "ref_clk_src", > + "ref_clk", > + "ref_aux_clk"; > + clocks = > + <&rpmcc 0>, > + <&gcc GCC_UFS_CLKREF_CLK>, > + <&gcc GCC_UFS_PHY_AUX_CLK>; > + > + status = "disabled"; > + > + ufsphy_lanes: lanes@1da7400 { > + reg = <0x1da7400 0x108>, > + <0x1da7600 0x1e0>, > + <0x1da7c00 0x1dc>, > + <0x1da7800 0x108>, > + <0x1da7a00 0x1e0>; > + #phy-cells = <0>; > + }; > + }; > }; > }; > diff --git a/drivers/clk/qcom/clk-smd-rpm.c b/drivers/clk/qcom/clk-smd-rpm.c > index 850c02a52248..12a0a2d6ec7b 100644 > --- a/drivers/clk/qcom/clk-smd-rpm.c > +++ b/drivers/clk/qcom/clk-smd-rpm.c > @@ -611,10 +611,25 @@ static const struct rpm_smd_clk_desc rpm_clk_msm8996 = { > .num_clks = ARRAY_SIZE(msm8996_clks), > }; > > +/* msm8998 */ > +#define LN_BB_CLK1_ID 0x1 > +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8998, ln_bb_clk1, ln_bb_a_clk1, LN_BB_CLK1_ID); > + > +static struct clk_smd_rpm *msm8998_clks[] = { > + [0] = &msm8998_ln_bb_clk1, > + [1] = &msm8998_ln_bb_a_clk1, > +}; > + > +static const struct rpm_smd_clk_desc rpm_clk_msm8998 = { > + .clks = msm8998_clks, > + .num_clks = ARRAY_SIZE(msm8998_clks), > +}; > + > static const struct of_device_id rpm_smd_clk_match_table[] = { > { .compatible = "qcom,rpmcc-msm8916", .data = &rpm_clk_msm8916 }, > { .compatible = "qcom,rpmcc-msm8974", .data = &rpm_clk_msm8974 }, > { .compatible = "qcom,rpmcc-msm8996", .data = &rpm_clk_msm8996 }, > + { .compatible = "qcom,rpmcc-msm8998", .data = &rpm_clk_msm8998 }, > { } > }; > MODULE_DEVICE_TABLE(of, rpm_smd_clk_match_table); >
On 12/3/2018 8:27 AM, Jeffrey Hugo wrote: > On 12/3/2018 8:18 AM, Marc Gonzalez wrote: >> Hello, >> >> I'm trying to enable UFS on apq8098. Just wanted to share my progress >> so far, in case someone spots any glaring mistakes. > > Excellent. This was down on my todo list. I'm glad its getting some > attention. > >> >> (WIP patch provided at message's end.) >> >> rpm_smd_clk_probe() runs successfully, and returns 0. >> >> qcom_qmp_phy_probe() fails: >> >> [ 0.913707] qcom-qmp-phy 1da7000.phy: Failed to get clk 'ref': -2 >> [ 0.913761] qcom-qmp-phy: probe of 1da7000.phy failed with error -2 >> >> ufs_qcom_probe() also fails (which may be caused by PHY failure) >> >> [ 2.368486] ufshcd-qcom 1da4000.ufshc: ufshcd_get_vreg: vdd-hba get >> failed, err=-517 >> [ 2.370673] ufshcd-qcom 1da4000.ufshc: Initialization failed >> [ 2.412908] ufshcd-qcom 1da4000.ufshc: ufshcd_pltfrm_init() failed >> -517 >> >> I'll investigate the PHY init. >> >> Regards. >> >> >> diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi >> b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi >> index b4276da1fb0d..ad7542f461af 100644 >> --- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi >> +++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi >> @@ -241,3 +241,26 @@ >> }; >> }; >> }; >> + >> +&ufshc { >> + status = "ok"; >> + vdd-hba-supply = <&gcc UFS_GDSC>; >> + vdd-hba-fixed-regulator; >> + vcc-supply = <&vreg_l20a_2p95>; >> + vccq-supply = <&vreg_l26a_1p2>; >> + vccq2-supply = <&vreg_s4a_1p8>; >> + vcc-max-microamp = <750000>; >> + vccq-max-microamp = <560000>; >> + vccq2-max-microamp = <750000>; >> +}; >> + >> +&ufsphy { >> + status = "ok"; >> + vdda-phy-supply = <&vreg_l1a_0p875>; >> + vdda-pll-supply = <&vreg_l2a_1p2>; >> + vddp-ref-clk-supply = <&vreg_l26a_1p2>; >> + vdda-phy-max-microamp = <51400>; >> + vdda-pll-max-microamp = <14600>; >> + vddp-ref-clk-max-microamp = <100>; >> + vddp-ref-clk-always-on; >> +}; >> diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi >> b/arch/arm64/boot/dts/qcom/msm8998.dtsi >> index d291b4713c33..10e7b8a55b8a 100644 >> --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi >> +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi >> @@ -264,6 +264,11 @@ >> rpm_requests: rpm-requests { >> compatible = "qcom,rpm-msm8998"; >> qcom,glink-channels = "rpm_requests"; >> + >> + rpmcc: qcom,rpmcc { >> + compatible = "qcom,rpmcc-msm8998"; >> + #clock-cells = <1>; >> + }; >> }; >> }; >> @@ -686,5 +691,79 @@ >> redistributor-stride = <0x0 0x20000>; >> interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; >> }; >> + >> + ufshc: ufshc@1da4000 { >> + compatible = "qcom,msm8998-ufshc", "qcom,ufshc", >> + "jedec,ufs-2.0"; >> + reg = <0x1da4000 0x2500>; >> + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; >> + phys = <&ufsphy_lanes>; >> + phy-names = "ufsphy"; >> + lanes-per-direction = <2>; >> + power-domains = <&gcc UFS_GDSC>; >> + >> + clock-names = >> + "core_clk", >> + "bus_aggr_clk", >> + "iface_clk", >> + "core_clk_unipro", >> + "core_clk_ice", >> + "ref_clk", >> + "tx_lane0_sync_clk", >> + "rx_lane0_sync_clk", >> + "rx_lane1_sync_clk"; >> + clocks = >> + <&gcc GCC_UFS_AXI_CLK>, >> + <&gcc GCC_AGGRE1_UFS_AXI_CLK>, >> + <&gcc GCC_UFS_AHB_CLK>, >> + <&gcc GCC_UFS_UNIPRO_CORE_CLK>, >> + <&gcc GCC_UFS_ICE_CORE_CLK>, >> + <&rpmcc 0>, >> + <&gcc GCC_UFS_TX_SYMBOL_0_CLK>, >> + <&gcc GCC_UFS_RX_SYMBOL_0_CLK>, >> + <&gcc GCC_UFS_RX_SYMBOL_1_CLK>; >> + freq-table-hz = >> + <50000000 200000000>, >> + <0 0>, >> + <0 0>, >> + <37500000 150000000>, >> + <75000000 300000000>, >> + <0 0>, >> + <0 0>, >> + <0 0>, >> + <0 0>; >> + >> + resets = <&gcc GCC_UFS_BCR>; > > I dunno how much this factors into your issues, but the resets defined > in gcc-msm8998.c are wrong. I'm posting a patch later today. I know > this was a problem for me with USB. > >> + reset-names = "rst"; >> + >> + status = "disabled"; >> + }; >> + >> + ufsphy: phy@1da7000 { >> + compatible = "qcom,sdm845-qmp-ufs-phy"; >> + reg = <0x1da7000 0x18c>; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + ranges; >> + clock-names = >> + "ref_clk_src", >> + "ref_clk", >> + "ref_aux_clk"; >> + clocks = >> + <&rpmcc 0>, >> + <&gcc GCC_UFS_CLKREF_CLK>, Also, "GCC_UFS_CLKREF_CLK" is not defined in include/dt-bindings/clock/qcom,gcc-msm8998.h which is probably the cause of your -2 error listed above. >> + <&gcc GCC_UFS_PHY_AUX_CLK>; >> + >> + status = "disabled"; >> + >> + ufsphy_lanes: lanes@1da7400 { >> + reg = <0x1da7400 0x108>, >> + <0x1da7600 0x1e0>, >> + <0x1da7c00 0x1dc>, >> + <0x1da7800 0x108>, >> + <0x1da7a00 0x1e0>; >> + #phy-cells = <0>; >> + }; >> + }; >> }; >> }; >> diff --git a/drivers/clk/qcom/clk-smd-rpm.c >> b/drivers/clk/qcom/clk-smd-rpm.c >> index 850c02a52248..12a0a2d6ec7b 100644 >> --- a/drivers/clk/qcom/clk-smd-rpm.c >> +++ b/drivers/clk/qcom/clk-smd-rpm.c >> @@ -611,10 +611,25 @@ static const struct rpm_smd_clk_desc >> rpm_clk_msm8996 = { >> .num_clks = ARRAY_SIZE(msm8996_clks), >> }; >> +/* msm8998 */ >> +#define LN_BB_CLK1_ID 0x1 >> +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8998, ln_bb_clk1, ln_bb_a_clk1, >> LN_BB_CLK1_ID); >> + >> +static struct clk_smd_rpm *msm8998_clks[] = { >> + [0] = &msm8998_ln_bb_clk1, >> + [1] = &msm8998_ln_bb_a_clk1, >> +}; >> + >> +static const struct rpm_smd_clk_desc rpm_clk_msm8998 = { >> + .clks = msm8998_clks, >> + .num_clks = ARRAY_SIZE(msm8998_clks), >> +}; >> + >> static const struct of_device_id rpm_smd_clk_match_table[] = { >> { .compatible = "qcom,rpmcc-msm8916", .data = &rpm_clk_msm8916 }, >> { .compatible = "qcom,rpmcc-msm8974", .data = &rpm_clk_msm8974 }, >> { .compatible = "qcom,rpmcc-msm8996", .data = &rpm_clk_msm8996 }, >> + { .compatible = "qcom,rpmcc-msm8998", .data = &rpm_clk_msm8998 }, >> { } >> }; >> MODULE_DEVICE_TABLE(of, rpm_smd_clk_match_table); >> > >
On 03/12/2018 16:47, Jeffrey Hugo wrote: > On 12/3/2018 8:27 AM, Jeffrey Hugo wrote: > >> On 12/3/2018 8:18 AM, Marc Gonzalez wrote: >> >>> + ufsphy: phy@1da7000 { >>> + compatible = "qcom,sdm845-qmp-ufs-phy"; >>> + reg = <0x1da7000 0x18c>; >>> + #address-cells = <1>; >>> + #size-cells = <1>; >>> + ranges; >>> + clock-names = >>> + "ref_clk_src", >>> + "ref_clk", >>> + "ref_aux_clk"; >>> + clocks = >>> + <&rpmcc 0>, >>> + <&gcc GCC_UFS_CLKREF_CLK>, > > Also, "GCC_UFS_CLKREF_CLK" is not defined in > include/dt-bindings/clock/qcom,gcc-msm8998.h which is probably the cause > of your -2 error listed above. If it were undefined, dtc would have kicked me in the nads :-) $ git grep GCC_UFS_CLKREF_CLK include include/dt-bindings/clock/qcom,gcc-msm8996.h:#define GCC_UFS_CLKREF_CLK 215 include/dt-bindings/clock/qcom,gcc-msm8998.h:#define GCC_UFS_CLKREF_CLK 168 include/dt-bindings/clock/qcom,gcc-sdm660.h:#define GCC_UFS_CLKREF_CLK 81 Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt spells it out: For "qcom,sdm845-qmp-ufs-phy", clock-names must contain "ref", "ref_aux". Regards.
On 12/3/2018 8:53 AM, Marc Gonzalez wrote: > On 03/12/2018 16:47, Jeffrey Hugo wrote: > >> On 12/3/2018 8:27 AM, Jeffrey Hugo wrote: >> >>> On 12/3/2018 8:18 AM, Marc Gonzalez wrote: >>> >>>> + ufsphy: phy@1da7000 { >>>> + compatible = "qcom,sdm845-qmp-ufs-phy"; >>>> + reg = <0x1da7000 0x18c>; >>>> + #address-cells = <1>; >>>> + #size-cells = <1>; >>>> + ranges; >>>> + clock-names = >>>> + "ref_clk_src", >>>> + "ref_clk", >>>> + "ref_aux_clk"; >>>> + clocks = >>>> + <&rpmcc 0>, >>>> + <&gcc GCC_UFS_CLKREF_CLK>, >> >> Also, "GCC_UFS_CLKREF_CLK" is not defined in >> include/dt-bindings/clock/qcom,gcc-msm8998.h which is probably the cause >> of your -2 error listed above. > > If it were undefined, dtc would have kicked me in the nads :-) > > $ git grep GCC_UFS_CLKREF_CLK include > include/dt-bindings/clock/qcom,gcc-msm8996.h:#define GCC_UFS_CLKREF_CLK 215 > include/dt-bindings/clock/qcom,gcc-msm8998.h:#define GCC_UFS_CLKREF_CLK 168 Not present in v4.20-rc5 nor linux-next. Did you add this yourself? If so, did you also update the driver? > include/dt-bindings/clock/qcom,gcc-sdm660.h:#define GCC_UFS_CLKREF_CLK 81 > > Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt spells it out: > For "qcom,sdm845-qmp-ufs-phy", clock-names must contain "ref", "ref_aux".
On Mon 03 Dec 07:47 PST 2018, Jeffrey Hugo wrote: > On 12/3/2018 8:27 AM, Jeffrey Hugo wrote: > > On 12/3/2018 8:18 AM, Marc Gonzalez wrote: > > > Hello, > > > > > > I'm trying to enable UFS on apq8098. Just wanted to share my progress > > > so far, in case someone spots any glaring mistakes. > > > > Excellent. This was down on my todo list. I'm glad its getting some > > attention. > > > > > > > > (WIP patch provided at message's end.) > > > > > > rpm_smd_clk_probe() runs successfully, and returns 0. > > > > > > qcom_qmp_phy_probe() fails: > > > > > > [ 0.913707] qcom-qmp-phy 1da7000.phy: Failed to get clk 'ref': -2 > > > [ 0.913761] qcom-qmp-phy: probe of 1da7000.phy failed with error -2 > > > > > > ufs_qcom_probe() also fails (which may be caused by PHY failure) > > > > > > [ 2.368486] ufshcd-qcom 1da4000.ufshc: ufshcd_get_vreg: vdd-hba > > > get failed, err=-517 > > > [ 2.370673] ufshcd-qcom 1da4000.ufshc: Initialization failed > > > [ 2.412908] ufshcd-qcom 1da4000.ufshc: ufshcd_pltfrm_init() > > > failed -517 > > > > > > I'll investigate the PHY init. > > > > > > Regards. > > > > > > > > > diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi > > > b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi > > > index b4276da1fb0d..ad7542f461af 100644 > > > --- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi > > > +++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi > > > @@ -241,3 +241,26 @@ > > > }; > > > }; > > > }; > > > + > > > +&ufshc { > > > + status = "ok"; > > > + vdd-hba-supply = <&gcc UFS_GDSC>; > > > + vdd-hba-fixed-regulator; > > > + vcc-supply = <&vreg_l20a_2p95>; > > > + vccq-supply = <&vreg_l26a_1p2>; > > > + vccq2-supply = <&vreg_s4a_1p8>; > > > + vcc-max-microamp = <750000>; > > > + vccq-max-microamp = <560000>; > > > + vccq2-max-microamp = <750000>; > > > +}; > > > + > > > +&ufsphy { > > > + status = "ok"; > > > + vdda-phy-supply = <&vreg_l1a_0p875>; > > > + vdda-pll-supply = <&vreg_l2a_1p2>; > > > + vddp-ref-clk-supply = <&vreg_l26a_1p2>; > > > + vdda-phy-max-microamp = <51400>; > > > + vdda-pll-max-microamp = <14600>; > > > + vddp-ref-clk-max-microamp = <100>; > > > + vddp-ref-clk-always-on; > > > +}; > > > diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi > > > b/arch/arm64/boot/dts/qcom/msm8998.dtsi > > > index d291b4713c33..10e7b8a55b8a 100644 > > > --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi > > > +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi > > > @@ -264,6 +264,11 @@ > > > rpm_requests: rpm-requests { > > > compatible = "qcom,rpm-msm8998"; > > > qcom,glink-channels = "rpm_requests"; > > > + > > > + rpmcc: qcom,rpmcc { > > > + compatible = "qcom,rpmcc-msm8998"; > > > + #clock-cells = <1>; > > > + }; > > > }; > > > }; > > > @@ -686,5 +691,79 @@ > > > redistributor-stride = <0x0 0x20000>; > > > interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; > > > }; > > > + > > > + ufshc: ufshc@1da4000 { > > > + compatible = "qcom,msm8998-ufshc", "qcom,ufshc", > > > + "jedec,ufs-2.0"; > > > + reg = <0x1da4000 0x2500>; > > > + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; > > > + phys = <&ufsphy_lanes>; > > > + phy-names = "ufsphy"; > > > + lanes-per-direction = <2>; > > > + power-domains = <&gcc UFS_GDSC>; > > > + > > > + clock-names = > > > + "core_clk", > > > + "bus_aggr_clk", > > > + "iface_clk", > > > + "core_clk_unipro", > > > + "core_clk_ice", > > > + "ref_clk", > > > + "tx_lane0_sync_clk", > > > + "rx_lane0_sync_clk", > > > + "rx_lane1_sync_clk"; > > > + clocks = > > > + <&gcc GCC_UFS_AXI_CLK>, > > > + <&gcc GCC_AGGRE1_UFS_AXI_CLK>, > > > + <&gcc GCC_UFS_AHB_CLK>, > > > + <&gcc GCC_UFS_UNIPRO_CORE_CLK>, > > > + <&gcc GCC_UFS_ICE_CORE_CLK>, > > > + <&rpmcc 0>, > > > + <&gcc GCC_UFS_TX_SYMBOL_0_CLK>, > > > + <&gcc GCC_UFS_RX_SYMBOL_0_CLK>, > > > + <&gcc GCC_UFS_RX_SYMBOL_1_CLK>; > > > + freq-table-hz = > > > + <50000000 200000000>, > > > + <0 0>, > > > + <0 0>, > > > + <37500000 150000000>, > > > + <75000000 300000000>, > > > + <0 0>, > > > + <0 0>, > > > + <0 0>, > > > + <0 0>; > > > + > > > + resets = <&gcc GCC_UFS_BCR>; > > > > I dunno how much this factors into your issues, but the resets defined > > in gcc-msm8998.c are wrong. I'm posting a patch later today. I know > > this was a problem for me with USB. > > > > > + reset-names = "rst"; > > > + > > > + status = "disabled"; > > > + }; > > > + > > > + ufsphy: phy@1da7000 { > > > + compatible = "qcom,sdm845-qmp-ufs-phy"; > > > + reg = <0x1da7000 0x18c>; > > > + #address-cells = <1>; > > > + #size-cells = <1>; > > > + ranges; > > > + clock-names = > > > + "ref_clk_src", > > > + "ref_clk", > > > + "ref_aux_clk"; > > > + clocks = > > > + <&rpmcc 0>, > > > + <&gcc GCC_UFS_CLKREF_CLK>, > > Also, "GCC_UFS_CLKREF_CLK" is not defined in > include/dt-bindings/clock/qcom,gcc-msm8998.h which is probably the cause of > your -2 error listed above. > I agree, this would cause the problem you're seeing. Please find this clock at: https://lore.kernel.org/lkml/20181130065259.26497-4-bjorn.andersson@linaro.org/ I will respin patch 1 and post the series again in a few hours. Regards, Bjorn
On 03/12/2018 17:03, Jeffrey Hugo wrote: > On 12/3/2018 8:53 AM, Marc Gonzalez wrote: > >> On 03/12/2018 16:47, Jeffrey Hugo wrote: >> >>> On 12/3/2018 8:27 AM, Jeffrey Hugo wrote: >>> >>>> On 12/3/2018 8:18 AM, Marc Gonzalez wrote: >>>> >>>>> + ufsphy: phy@1da7000 { >>>>> + compatible = "qcom,sdm845-qmp-ufs-phy"; >>>>> + reg = <0x1da7000 0x18c>; >>>>> + #address-cells = <1>; >>>>> + #size-cells = <1>; >>>>> + ranges; >>>>> + clock-names = >>>>> + "ref_clk_src", >>>>> + "ref_clk", >>>>> + "ref_aux_clk"; >>>>> + clocks = >>>>> + <&rpmcc 0>, >>>>> + <&gcc GCC_UFS_CLKREF_CLK>, >>> >>> Also, "GCC_UFS_CLKREF_CLK" is not defined in >>> include/dt-bindings/clock/qcom,gcc-msm8998.h which is probably the cause >>> of your -2 error listed above. >> >> If it were undefined, dtc would have kicked me in the nads :-) >> >> $ git grep GCC_UFS_CLKREF_CLK include >> include/dt-bindings/clock/qcom,gcc-msm8996.h:#define GCC_UFS_CLKREF_CLK 215 >> include/dt-bindings/clock/qcom,gcc-msm8998.h:#define GCC_UFS_CLKREF_CLK 168 > > Not present in v4.20-rc5 nor linux-next. Did you add this yourself? If > so, did you also update the driver? You're right. I applied Bjorn's patch series. [PATCH 0/3] clk: qcom: gcc-msm8998: Fixes and clkref clocks Regards.
On 12/3/2018 9:13 AM, Marc Gonzalez wrote: > On 03/12/2018 17:03, Jeffrey Hugo wrote: > >> On 12/3/2018 8:53 AM, Marc Gonzalez wrote: >> >>> On 03/12/2018 16:47, Jeffrey Hugo wrote: >>> >>>> On 12/3/2018 8:27 AM, Jeffrey Hugo wrote: >>>> >>>>> On 12/3/2018 8:18 AM, Marc Gonzalez wrote: >>>>> >>>>>> + ufsphy: phy@1da7000 { >>>>>> + compatible = "qcom,sdm845-qmp-ufs-phy"; >>>>>> + reg = <0x1da7000 0x18c>; >>>>>> + #address-cells = <1>; >>>>>> + #size-cells = <1>; >>>>>> + ranges; >>>>>> + clock-names = >>>>>> + "ref_clk_src", >>>>>> + "ref_clk", >>>>>> + "ref_aux_clk"; >>>>>> + clocks = >>>>>> + <&rpmcc 0>, >>>>>> + <&gcc GCC_UFS_CLKREF_CLK>, >>>> >>>> Also, "GCC_UFS_CLKREF_CLK" is not defined in >>>> include/dt-bindings/clock/qcom,gcc-msm8998.h which is probably the cause >>>> of your -2 error listed above. >>> >>> If it were undefined, dtc would have kicked me in the nads :-) >>> >>> $ git grep GCC_UFS_CLKREF_CLK include >>> include/dt-bindings/clock/qcom,gcc-msm8996.h:#define GCC_UFS_CLKREF_CLK 215 >>> include/dt-bindings/clock/qcom,gcc-msm8998.h:#define GCC_UFS_CLKREF_CLK 168 >> >> Not present in v4.20-rc5 nor linux-next. Did you add this yourself? If >> so, did you also update the driver? > > You're right. I applied Bjorn's patch series. > [PATCH 0/3] clk: qcom: gcc-msm8998: Fixes and clkref clocks > Ok. Then its non-obvious to me why you are getting the ref clock error.
On 03/12/2018 17:18, Jeffrey Hugo wrote:
> Ok. Then its non-obvious to me why you are getting the ref clock error.
Sorry for being unclear, the issue was resolved with
(as specified in Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt)
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index 10e7b8a55b8a..b5b2b05bc782 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -745,12 +745,8 @@
#address-cells = <1>;
#size-cells = <1>;
ranges;
- clock-names =
- "ref_clk_src",
- "ref_clk",
- "ref_aux_clk";
+ clock-names = "ref", "ref_aux";
clocks =
- <&rpmcc 0>,
<&gcc GCC_UFS_CLKREF_CLK>,
<&gcc GCC_UFS_PHY_AUX_CLK>;
PHY init seems to work now:
[ 1.000150] qcom-qmp-phy 1da7000.phy: Linked as a consumer to regulator.15
[ 1.000256] qcom-qmp-phy 1da7000.phy: Linked as a consumer to regulator.16
[ 1.000882] qcom-qmp-phy 1da7000.phy: Registered Qcom-QMP phy
Moving on to MAC init errors :-)
[ 2.314303] ufshcd-qcom 1da4000.ufshc: ufshcd_get_vreg: vdd-hba get failed, err=-517
[ 2.314530] ufshcd-qcom 1da4000.ufshc: Initialization failed
[ 2.376216] ufshcd-qcom 1da4000.ufshc: ufshcd_pltfrm_init() failed -517
(I do note that sdm845 does not define the vdd-hba-supply prop.)
Regards.
On 03/12/2018 16:18, Marc Gonzalez wrote: > I'm trying to enable UFS on apq8098. Just wanted to share my progress > so far, in case someone spots any glaring mistakes. > > rpm_smd_clk_probe() runs successfully, and returns 0. > > qcom_qmp_phy_probe() fails: > > [ 0.913707] qcom-qmp-phy 1da7000.phy: Failed to get clk 'ref': -2 > [ 0.913761] qcom-qmp-phy: probe of 1da7000.phy failed with error -2 > > ufs_qcom_probe() also fails (which may be caused by PHY failure) > > [ 2.368486] ufshcd-qcom 1da4000.ufshc: ufshcd_get_vreg: vdd-hba get failed, err=-517 > [ 2.370673] ufshcd-qcom 1da4000.ufshc: Initialization failed > [ 2.412908] ufshcd-qcom 1da4000.ufshc: ufshcd_pltfrm_init() failed -517 Having solved these trivial issues, I hit other issues later on. (Full diff provided below, including code from Bjorn and Jeffrey) Relevant logs: [ 0.970565] qcom-qmp-phy 1da7000.phy: Linked as a consumer to regulator.15 [ 0.970676] qcom-qmp-phy 1da7000.phy: Linked as a consumer to regulator.16 [ 0.971349] qcom-qmp-phy 1da7000.phy: Registered Qcom-QMP phy [ 2.293324] ufshcd-qcom 1da4000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled [ 2.355902] ufshcd-qcom 1da4000.ufshc: Linked as a consumer to regulator.34 [ 2.359197] ufshcd-qcom 1da4000.ufshc: Linked as a consumer to regulator.40 [ 2.365857] ufshcd-qcom 1da4000.ufshc: Linked as a consumer to regulator.5 [ 2.400665] scsi host0: ufshcd [ 2.435181] ufshcd-qcom 1da4000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0 [ 3.968211] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag: Sending flag query for idn 1 failed, err = -11 [ 5.472133] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag: Sending flag query for idn 1 failed, err = -11 [ 6.976114] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag: Sending flag query for idn 1 failed, err = -11 [ 6.976387] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag_retry: query attribute, opcode 6, idn 1, failed with error -11 after 3 retires [ 6.984999] ufshcd-qcom 1da4000.ufshc: ufshcd_complete_dev_init setting fDeviceInit flag failed with error -11 I will investigate :-) Regards. diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi index b4276da1fb0d..cc35086422b4 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi @@ -241,3 +241,26 @@ }; }; }; + +&ufshc { + status = "ok"; +/*** vdd-hba-supply = <&gcc UFS_GDSC>; -EPROBE_DEFER ***/ + vdd-hba-fixed-regulator; + vcc-supply = <&vreg_l20a_2p95>; + vccq-supply = <&vreg_l26a_1p2>; + vccq2-supply = <&vreg_s4a_1p8>; + vcc-max-microamp = <750000>; + vccq-max-microamp = <560000>; + vccq2-max-microamp = <750000>; +}; + +&ufsphy { + status = "ok"; + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l2a_1p2>; + vddp-ref-clk-supply = <&vreg_l26a_1p2>; + vdda-phy-max-microamp = <51400>; + vdda-pll-max-microamp = <14600>; + vddp-ref-clk-max-microamp = <100>; + vddp-ref-clk-always-on; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index d291b4713c33..b5b2b05bc782 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -264,6 +264,11 @@ rpm_requests: rpm-requests { compatible = "qcom,rpm-msm8998"; qcom,glink-channels = "rpm_requests"; + + rpmcc: qcom,rpmcc { + compatible = "qcom,rpmcc-msm8998"; + #clock-cells = <1>; + }; }; }; @@ -686,5 +691,75 @@ redistributor-stride = <0x0 0x20000>; interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; }; + + ufshc: ufshc@1da4000 { + compatible = "qcom,msm8998-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0x1da4000 0x2500>; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + phys = <&ufsphy_lanes>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + power-domains = <&gcc UFS_GDSC>; + + clock-names = + "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "core_clk_ice", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + clocks = + <&gcc GCC_UFS_AXI_CLK>, + <&gcc GCC_AGGRE1_UFS_AXI_CLK>, + <&gcc GCC_UFS_AHB_CLK>, + <&gcc GCC_UFS_UNIPRO_CORE_CLK>, + <&gcc GCC_UFS_ICE_CORE_CLK>, + <&rpmcc 0>, + <&gcc GCC_UFS_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_RX_SYMBOL_1_CLK>; + freq-table-hz = + <50000000 200000000>, + <0 0>, + <0 0>, + <37500000 150000000>, + <75000000 300000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>; + + resets = <&gcc GCC_UFS_BCR>; + reset-names = "rst"; + + status = "disabled"; + }; + + ufsphy: phy@1da7000 { + compatible = "qcom,sdm845-qmp-ufs-phy"; + reg = <0x1da7000 0x18c>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clock-names = "ref", "ref_aux"; + clocks = + <&gcc GCC_UFS_CLKREF_CLK>, + <&gcc GCC_UFS_PHY_AUX_CLK>; + + status = "disabled"; + + ufsphy_lanes: lanes@1da7400 { + reg = <0x1da7400 0x108>, + <0x1da7600 0x1e0>, + <0x1da7c00 0x1dc>, + <0x1da7800 0x108>, + <0x1da7a00 0x1e0>; + #phy-cells = <0>; + }; + }; }; }; diff --git a/drivers/clk/qcom/clk-smd-rpm.c b/drivers/clk/qcom/clk-smd-rpm.c index 850c02a52248..12a0a2d6ec7b 100644 --- a/drivers/clk/qcom/clk-smd-rpm.c +++ b/drivers/clk/qcom/clk-smd-rpm.c @@ -611,10 +611,25 @@ static const struct rpm_smd_clk_desc rpm_clk_msm8996 = { .num_clks = ARRAY_SIZE(msm8996_clks), }; +/* msm8998 */ +#define LN_BB_CLK1_ID 0x1 +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8998, ln_bb_clk1, ln_bb_a_clk1, LN_BB_CLK1_ID); + +static struct clk_smd_rpm *msm8998_clks[] = { + [0] = &msm8998_ln_bb_clk1, + [1] = &msm8998_ln_bb_a_clk1, +}; + +static const struct rpm_smd_clk_desc rpm_clk_msm8998 = { + .clks = msm8998_clks, + .num_clks = ARRAY_SIZE(msm8998_clks), +}; + static const struct of_device_id rpm_smd_clk_match_table[] = { { .compatible = "qcom,rpmcc-msm8916", .data = &rpm_clk_msm8916 }, { .compatible = "qcom,rpmcc-msm8974", .data = &rpm_clk_msm8974 }, { .compatible = "qcom,rpmcc-msm8996", .data = &rpm_clk_msm8996 }, + { .compatible = "qcom,rpmcc-msm8998", .data = &rpm_clk_msm8998 }, { } }; MODULE_DEVICE_TABLE(of, rpm_smd_clk_match_table); diff --git a/drivers/clk/qcom/gcc-msm8998.c b/drivers/clk/qcom/gcc-msm8998.c index 9f0ae403d5f5..4fc1502cab5c 100644 --- a/drivers/clk/qcom/gcc-msm8998.c +++ b/drivers/clk/qcom/gcc-msm8998.c @@ -1972,6 +1972,7 @@ static struct clk_branch gcc_hmss_dvm_bus_clk = { .enable_mask = BIT(0), .hw.init = &(struct clk_init_data){ .name = "gcc_hmss_dvm_bus_clk", + .flags = CLK_IS_CRITICAL, .ops = &clk_branch2_ops, }, }, @@ -2015,6 +2016,7 @@ static struct clk_branch gcc_lpass_at_clk = { .enable_mask = BIT(0), .hw.init = &(struct clk_init_data){ .name = "gcc_lpass_at_clk", + .flags = CLK_IS_CRITICAL, .ops = &clk_branch2_ops, }, }, @@ -2401,7 +2403,7 @@ static struct clk_branch gcc_ufs_phy_aux_clk = { static struct clk_branch gcc_ufs_rx_symbol_0_clk = { .halt_reg = 0x75014, - .halt_check = BRANCH_HALT, + .halt_check = BRANCH_HALT_SKIP, .clkr = { .enable_reg = 0x75014, .enable_mask = BIT(0), @@ -2414,7 +2416,7 @@ static struct clk_branch gcc_ufs_rx_symbol_0_clk = { static struct clk_branch gcc_ufs_rx_symbol_1_clk = { .halt_reg = 0x7605c, - .halt_check = BRANCH_HALT, + .halt_check = BRANCH_HALT_SKIP, .clkr = { .enable_reg = 0x7605c, .enable_mask = BIT(0), @@ -2427,7 +2429,7 @@ static struct clk_branch gcc_ufs_rx_symbol_1_clk = { static struct clk_branch gcc_ufs_tx_symbol_0_clk = { .halt_reg = 0x75010, - .halt_check = BRANCH_HALT, + .halt_check = BRANCH_HALT_SKIP, .clkr = { .enable_reg = 0x75010, .enable_mask = BIT(0), @@ -2541,6 +2543,76 @@ static struct clk_branch gcc_usb_phy_cfg_ahb2phy_clk = { }, }; +static struct clk_branch gcc_hdmi_clkref_clk = { + .halt_reg = 0x88000, + .clkr = { + .enable_reg = 0x88000, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_hdmi_clkref_clk", + .parent_names = (const char *[]){ "xo" }, + .num_parents = 1, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_ufs_clkref_clk = { + .halt_reg = 0x88004, + .clkr = { + .enable_reg = 0x88004, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_clkref_clk", + .parent_names = (const char *[]){ "xo" }, + .num_parents = 1, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_usb3_clkref_clk = { + .halt_reg = 0x88008, + .clkr = { + .enable_reg = 0x88008, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb3_clkref_clk", + .parent_names = (const char *[]){ "xo" }, + .num_parents = 1, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pcie_clkref_clk = { + .halt_reg = 0x8800c, + .clkr = { + .enable_reg = 0x8800c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie_clkref_clk", + .parent_names = (const char *[]){ "xo" }, + .num_parents = 1, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_rx1_usb2_clkref_clk = { + .halt_reg = 0x88014, + .clkr = { + .enable_reg = 0x88014, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_rx1_usb2_clkref_clk", + .parent_names = (const char *[]){ "xo" }, + .num_parents = 1, + .ops = &clk_branch2_ops, + }, + }, +}; + static struct gdsc pcie_0_gdsc = { .gdscr = 0x6b004, .gds_hw_ctrl = 0x0, @@ -2733,6 +2805,11 @@ static struct clk_regmap *gcc_msm8998_clocks[] = { [USB30_MASTER_CLK_SRC] = &usb30_master_clk_src.clkr, [USB30_MOCK_UTMI_CLK_SRC] = &usb30_mock_utmi_clk_src.clkr, [USB3_PHY_AUX_CLK_SRC] = &usb3_phy_aux_clk_src.clkr, + [GCC_HDMI_CLKREF_CLK] = &gcc_hdmi_clkref_clk.clkr, + [GCC_UFS_CLKREF_CLK] = &gcc_ufs_clkref_clk.clkr, + [GCC_USB3_CLKREF_CLK] = &gcc_usb3_clkref_clk.clkr, + [GCC_PCIE_CLKREF_CLK] = &gcc_pcie_clkref_clk.clkr, + [GCC_RX1_USB2_CLKREF_CLK] = &gcc_rx1_usb2_clkref_clk.clkr, }; static struct gdsc *gcc_msm8998_gdscs[] = { @@ -2742,25 +2819,25 @@ static struct gdsc *gcc_msm8998_gdscs[] = { }; static const struct qcom_reset_map gcc_msm8998_resets[] = { - [GCC_BLSP1_QUP1_BCR] = { 0x102400 }, - [GCC_BLSP1_QUP2_BCR] = { 0x110592 }, - [GCC_BLSP1_QUP3_BCR] = { 0x118784 }, - [GCC_BLSP1_QUP4_BCR] = { 0x126976 }, - [GCC_BLSP1_QUP5_BCR] = { 0x135168 }, - [GCC_BLSP1_QUP6_BCR] = { 0x143360 }, - [GCC_BLSP2_QUP1_BCR] = { 0x155648 }, - [GCC_BLSP2_QUP2_BCR] = { 0x163840 }, - [GCC_BLSP2_QUP3_BCR] = { 0x172032 }, - [GCC_BLSP2_QUP4_BCR] = { 0x180224 }, - [GCC_BLSP2_QUP5_BCR] = { 0x188416 }, - [GCC_BLSP2_QUP6_BCR] = { 0x196608 }, - [GCC_PCIE_0_BCR] = { 0x438272 }, - [GCC_PDM_BCR] = { 0x208896 }, - [GCC_SDCC2_BCR] = { 0x81920 }, - [GCC_SDCC4_BCR] = { 0x90112 }, - [GCC_TSIF_BCR] = { 0x221184 }, - [GCC_UFS_BCR] = { 0x479232 }, - [GCC_USB_30_BCR] = { 0x61440 }, + [GCC_BLSP1_QUP1_BCR] = { 0x19000 }, + [GCC_BLSP1_QUP2_BCR] = { 0x1b000 }, + [GCC_BLSP1_QUP3_BCR] = { 0x1d000 }, + [GCC_BLSP1_QUP4_BCR] = { 0x1f000 }, + [GCC_BLSP1_QUP5_BCR] = { 0x21000 }, + [GCC_BLSP1_QUP6_BCR] = { 0x23000 }, + [GCC_BLSP2_QUP1_BCR] = { 0x26000 }, + [GCC_BLSP2_QUP2_BCR] = { 0x28000 }, + [GCC_BLSP2_QUP3_BCR] = { 0x2a000 }, + [GCC_BLSP2_QUP4_BCR] = { 0x2c000 }, + [GCC_BLSP2_QUP5_BCR] = { 0x2e000 }, + [GCC_BLSP2_QUP6_BCR] = { 0x30000 }, + [GCC_PCIE_0_BCR] = { 0x6b000 }, + [GCC_PDM_BCR] = { 0x33000 }, + [GCC_SDCC2_BCR] = { 0x14000 }, + [GCC_SDCC4_BCR] = { 0x16000 }, + [GCC_TSIF_BCR] = { 0x36000 }, + [GCC_UFS_BCR] = { 0x75000 }, + [GCC_USB_30_BCR] = { 0xf000 }, }; static const struct regmap_config gcc_msm8998_regmap_config = { diff --git a/include/dt-bindings/clock/qcom,gcc-msm8998.h b/include/dt-bindings/clock/qcom,gcc-msm8998.h index 58a242e656b1..b3448800980a 100644 --- a/include/dt-bindings/clock/qcom,gcc-msm8998.h +++ b/include/dt-bindings/clock/qcom,gcc-msm8998.h @@ -180,6 +180,11 @@ #define USB30_MASTER_CLK_SRC 163 #define USB30_MOCK_UTMI_CLK_SRC 164 #define USB3_PHY_AUX_CLK_SRC 165 +#define GCC_USB3_CLKREF_CLK 166 +#define GCC_HDMI_CLKREF_CLK 167 +#define GCC_UFS_CLKREF_CLK 168 +#define GCC_PCIE_CLKREF_CLK 169 +#define GCC_RX1_USB2_CLKREF_CLK 170 #define PCIE_0_GDSC 0 #define UFS_GDSC 1
On 03/12/2018 17:53, Marc Gonzalez wrote: > [ 0.970565] qcom-qmp-phy 1da7000.phy: Linked as a consumer to regulator.15 > [ 0.970676] qcom-qmp-phy 1da7000.phy: Linked as a consumer to regulator.16 > [ 0.971349] qcom-qmp-phy 1da7000.phy: Registered Qcom-QMP phy > [ 2.293324] ufshcd-qcom 1da4000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled > [ 2.355902] ufshcd-qcom 1da4000.ufshc: Linked as a consumer to regulator.34 > [ 2.359197] ufshcd-qcom 1da4000.ufshc: Linked as a consumer to regulator.40 > [ 2.365857] ufshcd-qcom 1da4000.ufshc: Linked as a consumer to regulator.5 > [ 2.400665] scsi host0: ufshcd > [ 2.435181] ufshcd-qcom 1da4000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0 > [ 3.968211] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag: Sending flag query for idn 1 failed, err = -11 > [ 5.472133] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag: Sending flag query for idn 1 failed, err = -11 > [ 6.976114] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag: Sending flag query for idn 1 failed, err = -11 > [ 6.976387] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag_retry: query attribute, opcode 6, idn 1, failed with error -11 after 3 retires > [ 6.984999] ufshcd-qcom 1da4000.ufshc: ufshcd_complete_dev_init setting fDeviceInit flag failed with error -11 The PHY and MAC init *seem* successful, but obviously something goes wrong, since the query times out after 1500 ms, waiting for the completion in ufshcd_wait_for_dev_cmd() #define QUERY_REQ_TIMEOUT 1500 /* 1.5 seconds */ err is set to -ETIMEDOUT (i.e. -110) then the command is cleared for an ulterior retry, and err is set to -EAGAIN (i.e. -11) The question is: why does the command time out? Enabling DEBUG... [ 2.046246] ufshcd-qcom 1da4000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled [ 2.046675] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: core_clk, rate: 198400000 [ 2.056101] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: bus_aggr_clk, rate: 198400000 [ 2.064333] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: iface_clk, rate: 0 [ 2.072820] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: core_clk_unipro, rate: 0 [ 2.080304] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: core_clk_ice, rate: 0 [ 2.088547] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: ref_clk, rate: 0 [ 2.096269] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: tx_lane0_sync_clk, rate: 0 [ 2.103743] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: rx_lane0_sync_clk, rate: 0 [ 2.111812] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: rx_lane1_sync_clk, rate: 0 [ 2.120178] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: core_clk enabled [ 2.128292] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: bus_aggr_clk enabled [ 2.135848] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: iface_clk enabled [ 2.143833] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: core_clk_unipro enabled [ 2.151831] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: core_clk_ice enabled [ 2.160312] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: ref_clk enabled [ 2.167789] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: tx_lane0_sync_clk enabled [ 2.175444] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: rx_lane0_sync_clk enabled [ 2.184043] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: rx_lane1_sync_clk enabled [ 2.201054] ufshcd-qcom 1da4000.ufshc: Linked as a consumer to regulator.34 [ 2.204116] ufshcd-qcom 1da4000.ufshc: Linked as a consumer to regulator.40 [ 2.210800] ufshcd-qcom 1da4000.ufshc: Linked as a consumer to regulator.5 The zero clock rates look suspicious, don't they? [ 2.255243] ufshcd-qcom 1da4000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0 [ 2.256240] ufshcd_wait_for_dev_cmd: time_left=8 [ 2.266734] ufshcd_wait_for_dev_cmd = 0 This command succeeds. [ 3.780315] ufshcd_wait_for_dev_cmd: time_left=0 [ 3.780484] ufshcd-qcom 1da4000.ufshc: ufshcd_wait_for_dev_cmd: dev_cmd request timedout, tag 31 [ 3.784258] ufshcd_wait_for_dev_cmd = -11 [ 3.792949] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag: Sending flag query for idn 1 failed, err = -11 [ 3.796936] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag_retry: failed with error -11, retries 0 [ 3.872239] ufshcd-qcom 1da4000.ufshc: ufshcd_update_uic_error: UIC error flags = 0x00000000 [ 3.935871] ufshcd-qcom 1da4000.ufshc: ufshcd_update_uic_error: UIC error flags = 0x00000000 [ 4.006340] ufshcd-qcom 1da4000.ufshc: ufshcd_update_uic_error: UIC error flags = 0x00000001 [ 5.316263] ufshcd_wait_for_dev_cmd: time_left=0 [ 5.316406] ufshcd-qcom 1da4000.ufshc: ufshcd_wait_for_dev_cmd: dev_cmd request timedout, tag 31 [ 5.320177] ufshcd_wait_for_dev_cmd = -11 [ 5.328838] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag: Sending flag query for idn 1 failed, err = -11 [ 5.332872] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag_retry: failed with error -11, retries 1 [ 6.852272] ufshcd_wait_for_dev_cmd: time_left=0 [ 6.852415] ufshcd-qcom 1da4000.ufshc: ufshcd_wait_for_dev_cmd: dev_cmd request timedout, tag 31 [ 6.856185] ufshcd_wait_for_dev_cmd = -11 [ 6.864846] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag: Sending flag query for idn 1 failed, err = -11 [ 6.868872] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag_retry: failed with error -11, retries 2 [ 6.878415] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag_retry: query attribute, opcode 6, idn 1, failed with error -11 after 3 retires [ 6.887258] ufshcd-qcom 1da4000.ufshc: ufshcd_complete_dev_init setting fDeviceInit flag failed with error -11 [ 6.900929] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: core_clk disabled [ 6.909171] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: bus_aggr_clk disabled [ 6.917054] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: iface_clk disabled [ 6.925112] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: core_clk_unipro disabled [ 6.932849] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: core_clk_ice disabled [ 6.941305] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: ref_clk disabled [ 6.949346] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: tx_lane0_sync_clk disabled [ 6.956721] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: rx_lane0_sync_clk disabled [ 6.965405] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: rx_lane1_sync_clk disabled It's strange that one command succeeds, and the 3 next fail... Maybe they don't speak to the same HW block... Regards.
On 12/4/2018 8:23 AM, Marc Gonzalez wrote: > On 03/12/2018 17:53, Marc Gonzalez wrote: > >> [ 0.970565] qcom-qmp-phy 1da7000.phy: Linked as a consumer to regulator.15 >> [ 0.970676] qcom-qmp-phy 1da7000.phy: Linked as a consumer to regulator.16 >> [ 0.971349] qcom-qmp-phy 1da7000.phy: Registered Qcom-QMP phy >> [ 2.293324] ufshcd-qcom 1da4000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled >> [ 2.355902] ufshcd-qcom 1da4000.ufshc: Linked as a consumer to regulator.34 >> [ 2.359197] ufshcd-qcom 1da4000.ufshc: Linked as a consumer to regulator.40 >> [ 2.365857] ufshcd-qcom 1da4000.ufshc: Linked as a consumer to regulator.5 >> [ 2.400665] scsi host0: ufshcd >> [ 2.435181] ufshcd-qcom 1da4000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0 >> [ 3.968211] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag: Sending flag query for idn 1 failed, err = -11 >> [ 5.472133] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag: Sending flag query for idn 1 failed, err = -11 >> [ 6.976114] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag: Sending flag query for idn 1 failed, err = -11 >> [ 6.976387] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag_retry: query attribute, opcode 6, idn 1, failed with error -11 after 3 retires >> [ 6.984999] ufshcd-qcom 1da4000.ufshc: ufshcd_complete_dev_init setting fDeviceInit flag failed with error -11 > > The PHY and MAC init *seem* successful, but obviously something goes wrong, > since the query times out after 1500 ms, waiting for the completion in > ufshcd_wait_for_dev_cmd() > > #define QUERY_REQ_TIMEOUT 1500 /* 1.5 seconds */ > > err is set to -ETIMEDOUT (i.e. -110) then the command is cleared for an > ulterior retry, and err is set to -EAGAIN (i.e. -11) > > The question is: why does the command time out? > > Enabling DEBUG... > > [ 2.046246] ufshcd-qcom 1da4000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled > [ 2.046675] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: core_clk, rate: 198400000 > [ 2.056101] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: bus_aggr_clk, rate: 198400000 > [ 2.064333] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: iface_clk, rate: 0 > [ 2.072820] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: core_clk_unipro, rate: 0 > [ 2.080304] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: core_clk_ice, rate: 0 > [ 2.088547] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: ref_clk, rate: 0 > [ 2.096269] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: tx_lane0_sync_clk, rate: 0 > [ 2.103743] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: rx_lane0_sync_clk, rate: 0 > [ 2.111812] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: rx_lane1_sync_clk, rate: 0 > [ 2.120178] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: core_clk enabled > [ 2.128292] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: bus_aggr_clk enabled > [ 2.135848] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: iface_clk enabled > [ 2.143833] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: core_clk_unipro enabled > [ 2.151831] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: core_clk_ice enabled > [ 2.160312] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: ref_clk enabled > [ 2.167789] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: tx_lane0_sync_clk enabled > [ 2.175444] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: rx_lane0_sync_clk enabled > [ 2.184043] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: rx_lane1_sync_clk enabled > [ 2.201054] ufshcd-qcom 1da4000.ufshc: Linked as a consumer to regulator.34 > [ 2.204116] ufshcd-qcom 1da4000.ufshc: Linked as a consumer to regulator.40 > [ 2.210800] ufshcd-qcom 1da4000.ufshc: Linked as a consumer to regulator.5 > > The zero clock rates look suspicious, don't they? > > [ 2.255243] ufshcd-qcom 1da4000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0 > [ 2.256240] ufshcd_wait_for_dev_cmd: time_left=8 > [ 2.266734] ufshcd_wait_for_dev_cmd = 0 > > This command succeeds. > > [ 3.780315] ufshcd_wait_for_dev_cmd: time_left=0 > [ 3.780484] ufshcd-qcom 1da4000.ufshc: ufshcd_wait_for_dev_cmd: dev_cmd request timedout, tag 31 > [ 3.784258] ufshcd_wait_for_dev_cmd = -11 > [ 3.792949] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag: Sending flag query for idn 1 failed, err = -11 > [ 3.796936] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag_retry: failed with error -11, retries 0 > [ 3.872239] ufshcd-qcom 1da4000.ufshc: ufshcd_update_uic_error: UIC error flags = 0x00000000 > [ 3.935871] ufshcd-qcom 1da4000.ufshc: ufshcd_update_uic_error: UIC error flags = 0x00000000 > [ 4.006340] ufshcd-qcom 1da4000.ufshc: ufshcd_update_uic_error: UIC error flags = 0x00000001 > [ 5.316263] ufshcd_wait_for_dev_cmd: time_left=0 > [ 5.316406] ufshcd-qcom 1da4000.ufshc: ufshcd_wait_for_dev_cmd: dev_cmd request timedout, tag 31 > [ 5.320177] ufshcd_wait_for_dev_cmd = -11 > [ 5.328838] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag: Sending flag query for idn 1 failed, err = -11 > [ 5.332872] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag_retry: failed with error -11, retries 1 > [ 6.852272] ufshcd_wait_for_dev_cmd: time_left=0 > [ 6.852415] ufshcd-qcom 1da4000.ufshc: ufshcd_wait_for_dev_cmd: dev_cmd request timedout, tag 31 > [ 6.856185] ufshcd_wait_for_dev_cmd = -11 > [ 6.864846] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag: Sending flag query for idn 1 failed, err = -11 > [ 6.868872] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag_retry: failed with error -11, retries 2 > [ 6.878415] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag_retry: query attribute, opcode 6, idn 1, failed with error -11 after 3 retires > [ 6.887258] ufshcd-qcom 1da4000.ufshc: ufshcd_complete_dev_init setting fDeviceInit flag failed with error -11 > [ 6.900929] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: core_clk disabled > [ 6.909171] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: bus_aggr_clk disabled > [ 6.917054] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: iface_clk disabled > [ 6.925112] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: core_clk_unipro disabled > [ 6.932849] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: core_clk_ice disabled > [ 6.941305] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: ref_clk disabled > [ 6.949346] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: tx_lane0_sync_clk disabled > [ 6.956721] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: rx_lane0_sync_clk disabled > [ 6.965405] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: rx_lane1_sync_clk disabled > > It's strange that one command succeeds, and the 3 next fail... > Maybe they don't speak to the same HW block... Throwing something at a wall and seeing if it sticks.... The downstream MTP dtsi has - &ufsphy1 { vdda-phy-supply = <&pm8998_l1>; vdda-pll-supply = <&pm8998_l2>; vddp-ref-clk-supply = <&pm8998_l26>; vdda-phy-max-microamp = <51400>; vdda-pll-max-microamp = <14600>; vddp-ref-clk-max-microamp = <100>; vddp-ref-clk-always-on; status = "ok"; }; &ufs1 { vdd-hba-supply = <&gdsc_ufs>; vdd-hba-fixed-regulator; vcc-supply = <&pm8998_l20>; vccq-supply = <&pm8998_l26>; vccq2-supply = <&pm8998_s4>; vcc-max-microamp = <750000>; vccq-max-microamp = <560000>; vccq2-max-microamp = <750000>; status = "ok"; }; The *-max-microamp fields are basically load values that the downstream driver sets on the regulators to ensure they are in a performance mode before the driver attempts normal operation. On the corresponding regulators in the mtp dtsi, you might try adding regulator-allow-set-load; regulator-system-load = <X>; It might be that the regulators act as pull ups on some of the signal/data lines, and by default they are not being driven hard enough to do that job properly, resulting in the timeouts you see.
On 12/4/2018 8:45 AM, Jeffrey Hugo wrote: > On 12/4/2018 8:23 AM, Marc Gonzalez wrote: >> On 03/12/2018 17:53, Marc Gonzalez wrote: >> >>> [ 0.970565] qcom-qmp-phy 1da7000.phy: Linked as a consumer to >>> regulator.15 >>> [ 0.970676] qcom-qmp-phy 1da7000.phy: Linked as a consumer to >>> regulator.16 >>> [ 0.971349] qcom-qmp-phy 1da7000.phy: Registered Qcom-QMP phy >>> [ 2.293324] ufshcd-qcom 1da4000.ufshc: ufshcd_populate_vreg: >>> Unable to find vdd-hba-supply regulator, assuming enabled >>> [ 2.355902] ufshcd-qcom 1da4000.ufshc: Linked as a consumer to >>> regulator.34 >>> [ 2.359197] ufshcd-qcom 1da4000.ufshc: Linked as a consumer to >>> regulator.40 >>> [ 2.365857] ufshcd-qcom 1da4000.ufshc: Linked as a consumer to >>> regulator.5 >>> [ 2.400665] scsi host0: ufshcd >>> [ 2.435181] ufshcd-qcom 1da4000.ufshc: ufshcd_print_pwr_info:[RX, >>> TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate >>> = 0 >>> [ 3.968211] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag: Sending >>> flag query for idn 1 failed, err = -11 >>> [ 5.472133] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag: Sending >>> flag query for idn 1 failed, err = -11 >>> [ 6.976114] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag: Sending >>> flag query for idn 1 failed, err = -11 >>> [ 6.976387] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag_retry: >>> query attribute, opcode 6, idn 1, failed with error -11 after 3 retires >>> [ 6.984999] ufshcd-qcom 1da4000.ufshc: ufshcd_complete_dev_init >>> setting fDeviceInit flag failed with error -11 >> >> The PHY and MAC init *seem* successful, but obviously something goes >> wrong, >> since the query times out after 1500 ms, waiting for the completion in >> ufshcd_wait_for_dev_cmd() >> >> #define QUERY_REQ_TIMEOUT 1500 /* 1.5 seconds */ >> >> err is set to -ETIMEDOUT (i.e. -110) then the command is cleared for an >> ulterior retry, and err is set to -EAGAIN (i.e. -11) >> >> The question is: why does the command time out? >> >> Enabling DEBUG... >> >> [ 2.046246] ufshcd-qcom 1da4000.ufshc: ufshcd_populate_vreg: Unable >> to find vdd-hba-supply regulator, assuming enabled >> [ 2.046675] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: >> core_clk, rate: 198400000 >> [ 2.056101] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: >> bus_aggr_clk, rate: 198400000 >> [ 2.064333] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: >> iface_clk, rate: 0 >> [ 2.072820] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: >> core_clk_unipro, rate: 0 >> [ 2.080304] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: >> core_clk_ice, rate: 0 >> [ 2.088547] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: >> ref_clk, rate: 0 >> [ 2.096269] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: >> tx_lane0_sync_clk, rate: 0 >> [ 2.103743] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: >> rx_lane0_sync_clk, rate: 0 >> [ 2.111812] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: >> rx_lane1_sync_clk, rate: 0 >> [ 2.120178] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: >> core_clk enabled >> [ 2.128292] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: >> bus_aggr_clk enabled >> [ 2.135848] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: >> iface_clk enabled >> [ 2.143833] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: >> core_clk_unipro enabled >> [ 2.151831] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: >> core_clk_ice enabled >> [ 2.160312] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: >> ref_clk enabled >> [ 2.167789] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: >> tx_lane0_sync_clk enabled >> [ 2.175444] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: >> rx_lane0_sync_clk enabled >> [ 2.184043] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: >> rx_lane1_sync_clk enabled >> [ 2.201054] ufshcd-qcom 1da4000.ufshc: Linked as a consumer to >> regulator.34 >> [ 2.204116] ufshcd-qcom 1da4000.ufshc: Linked as a consumer to >> regulator.40 >> [ 2.210800] ufshcd-qcom 1da4000.ufshc: Linked as a consumer to >> regulator.5 >> >> The zero clock rates look suspicious, don't they? >> >> [ 2.255243] ufshcd-qcom 1da4000.ufshc: ufshcd_print_pwr_info:[RX, >> TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0 >> [ 2.256240] ufshcd_wait_for_dev_cmd: time_left=8 >> [ 2.266734] ufshcd_wait_for_dev_cmd = 0 >> >> This command succeeds. >> >> [ 3.780315] ufshcd_wait_for_dev_cmd: time_left=0 >> [ 3.780484] ufshcd-qcom 1da4000.ufshc: ufshcd_wait_for_dev_cmd: >> dev_cmd request timedout, tag 31 >> [ 3.784258] ufshcd_wait_for_dev_cmd = -11 >> [ 3.792949] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag: Sending >> flag query for idn 1 failed, err = -11 >> [ 3.796936] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag_retry: >> failed with error -11, retries 0 >> [ 3.872239] ufshcd-qcom 1da4000.ufshc: ufshcd_update_uic_error: UIC >> error flags = 0x00000000 >> [ 3.935871] ufshcd-qcom 1da4000.ufshc: ufshcd_update_uic_error: UIC >> error flags = 0x00000000 >> [ 4.006340] ufshcd-qcom 1da4000.ufshc: ufshcd_update_uic_error: UIC >> error flags = 0x00000001 >> [ 5.316263] ufshcd_wait_for_dev_cmd: time_left=0 >> [ 5.316406] ufshcd-qcom 1da4000.ufshc: ufshcd_wait_for_dev_cmd: >> dev_cmd request timedout, tag 31 >> [ 5.320177] ufshcd_wait_for_dev_cmd = -11 >> [ 5.328838] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag: Sending >> flag query for idn 1 failed, err = -11 >> [ 5.332872] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag_retry: >> failed with error -11, retries 1 >> [ 6.852272] ufshcd_wait_for_dev_cmd: time_left=0 >> [ 6.852415] ufshcd-qcom 1da4000.ufshc: ufshcd_wait_for_dev_cmd: >> dev_cmd request timedout, tag 31 >> [ 6.856185] ufshcd_wait_for_dev_cmd = -11 >> [ 6.864846] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag: Sending >> flag query for idn 1 failed, err = -11 >> [ 6.868872] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag_retry: >> failed with error -11, retries 2 >> [ 6.878415] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag_retry: >> query attribute, opcode 6, idn 1, failed with error -11 after 3 retires >> [ 6.887258] ufshcd-qcom 1da4000.ufshc: ufshcd_complete_dev_init >> setting fDeviceInit flag failed with error -11 >> [ 6.900929] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: >> core_clk disabled >> [ 6.909171] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: >> bus_aggr_clk disabled >> [ 6.917054] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: >> iface_clk disabled >> [ 6.925112] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: >> core_clk_unipro disabled >> [ 6.932849] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: >> core_clk_ice disabled >> [ 6.941305] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: >> ref_clk disabled >> [ 6.949346] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: >> tx_lane0_sync_clk disabled >> [ 6.956721] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: >> rx_lane0_sync_clk disabled >> [ 6.965405] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: >> rx_lane1_sync_clk disabled >> >> It's strange that one command succeeds, and the 3 next fail... >> Maybe they don't speak to the same HW block... > > Throwing something at a wall and seeing if it sticks.... > > The downstream MTP dtsi has - > > &ufsphy1 { > vdda-phy-supply = <&pm8998_l1>; > vdda-pll-supply = <&pm8998_l2>; > vddp-ref-clk-supply = <&pm8998_l26>; > vdda-phy-max-microamp = <51400>; > vdda-pll-max-microamp = <14600>; > vddp-ref-clk-max-microamp = <100>; > vddp-ref-clk-always-on; > status = "ok"; > }; > > &ufs1 { > vdd-hba-supply = <&gdsc_ufs>; > vdd-hba-fixed-regulator; > vcc-supply = <&pm8998_l20>; > vccq-supply = <&pm8998_l26>; > vccq2-supply = <&pm8998_s4>; > vcc-max-microamp = <750000>; > vccq-max-microamp = <560000>; > vccq2-max-microamp = <750000>; > status = "ok"; > }; > > > The *-max-microamp fields are basically load values that the downstream > driver sets on the regulators to ensure they are in a performance mode > before the driver attempts normal operation. > > On the corresponding regulators in the mtp dtsi, you might try adding > regulator-allow-set-load; > regulator-system-load = <X>; > > It might be that the regulators act as pull ups on some of the > signal/data lines, and by default they are not being driven hard enough > to do that job properly, resulting in the timeouts you see. > Nevermind, the mainline driver actually does this. Although I suppose out of paranoia, you could double check that the load is being set on the regulator as expected. IIRC, you can do that in sysfs.
On 04/12/2018 16:23, Marc Gonzalez wrote: > [ 2.046246] ufshcd-qcom 1da4000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled > [ 2.046675] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: core_clk, rate: 198400000 > [ 2.056101] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: bus_aggr_clk, rate: 198400000 > [ 2.064333] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: iface_clk, rate: 0 > [ 2.072820] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: core_clk_unipro, rate: 0 > [ 2.080304] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: core_clk_ice, rate: 0 > [ 2.088547] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: ref_clk, rate: 0 > [ 2.096269] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: tx_lane0_sync_clk, rate: 0 > [ 2.103743] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: rx_lane0_sync_clk, rate: 0 > [ 2.111812] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: rx_lane1_sync_clk, rate: 0 > [ 2.120178] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: core_clk enabled > [ 2.128292] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: bus_aggr_clk enabled > [ 2.135848] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: iface_clk enabled > [ 2.143833] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: core_clk_unipro enabled > [ 2.151831] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: core_clk_ice enabled > [ 2.160312] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: ref_clk enabled > [ 2.167789] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: tx_lane0_sync_clk enabled > [ 2.175444] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: rx_lane0_sync_clk enabled > [ 2.184043] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: rx_lane1_sync_clk enabled > [ 2.201054] ufshcd-qcom 1da4000.ufshc: Linked as a consumer to regulator.34 > [ 2.204116] ufshcd-qcom 1da4000.ufshc: Linked as a consumer to regulator.40 > [ 2.210800] ufshcd-qcom 1da4000.ufshc: Linked as a consumer to regulator.5 > [ 2.255243] ufshcd-qcom 1da4000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0 > [ 2.256240] ufshcd_wait_for_dev_cmd: time_left=8 > [ 2.266734] ufshcd_wait_for_dev_cmd = 0 > [ 3.780315] ufshcd_wait_for_dev_cmd: time_left=0 > [ 3.780484] ufshcd-qcom 1da4000.ufshc: ufshcd_wait_for_dev_cmd: dev_cmd request timedout, tag 31 > [ 3.784258] ufshcd_wait_for_dev_cmd = -11 > [ 3.792949] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag: Sending flag query for idn 1 failed, err = -11 > [ 3.796936] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag_retry: failed with error -11, retries 0 > [ 3.872239] ufshcd-qcom 1da4000.ufshc: ufshcd_update_uic_error: UIC error flags = 0x00000000 > [ 3.935871] ufshcd-qcom 1da4000.ufshc: ufshcd_update_uic_error: UIC error flags = 0x00000000 > [ 4.006340] ufshcd-qcom 1da4000.ufshc: ufshcd_update_uic_error: UIC error flags = 0x00000001 > [ 5.316263] ufshcd_wait_for_dev_cmd: time_left=0 > [ 5.316406] ufshcd-qcom 1da4000.ufshc: ufshcd_wait_for_dev_cmd: dev_cmd request timedout, tag 31 > [ 5.320177] ufshcd_wait_for_dev_cmd = -11 > [ 5.328838] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag: Sending flag query for idn 1 failed, err = -11 > [ 5.332872] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag_retry: failed with error -11, retries 1 > [ 6.852272] ufshcd_wait_for_dev_cmd: time_left=0 > [ 6.852415] ufshcd-qcom 1da4000.ufshc: ufshcd_wait_for_dev_cmd: dev_cmd request timedout, tag 31 > [ 6.856185] ufshcd_wait_for_dev_cmd = -11 > [ 6.864846] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag: Sending flag query for idn 1 failed, err = -11 > [ 6.868872] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag_retry: failed with error -11, retries 2 > [ 6.878415] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag_retry: query attribute, opcode 6, idn 1, failed with error -11 after 3 retires > [ 6.887258] ufshcd-qcom 1da4000.ufshc: ufshcd_complete_dev_init setting fDeviceInit flag failed with error -11 > [ 6.900929] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: core_clk disabled > [ 6.909171] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: bus_aggr_clk disabled > [ 6.917054] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: iface_clk disabled > [ 6.925112] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: core_clk_unipro disabled > [ 6.932849] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: core_clk_ice disabled > [ 6.941305] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: ref_clk disabled > [ 6.949346] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: tx_lane0_sync_clk disabled > [ 6.956721] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: rx_lane0_sync_clk disabled > [ 6.965405] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: rx_lane1_sync_clk disabled I booted a downstream kernel with UFS debug enabled (log provided below) The one difference that jumps out at me is: DOWNSTREAM [ 10.902119] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: core_clk_unipro, rate: 150000000 [ 10.902161] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: core_clk_ice, rate: 300000000 [ 10.902198] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: ref_clk, rate: 1000 UPSTREAM [ 2.072820] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: core_clk_unipro, rate: 0 [ 2.080304] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: core_clk_ice, rate: 0 [ 2.088547] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: ref_clk, rate: 0 Jeffrey, I will check the regulators per your suggestion. I'm all ears if you have suggestions for the clocks as well. Regards. [ 10.902030] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: core_clk, rate: 200000000 [ 10.902057] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: bus_aggr_clk, rate: 200000000 [ 10.902081] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: iface_clk, rate: 0 [ 10.902119] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: core_clk_unipro, rate: 150000000 [ 10.902161] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: core_clk_ice, rate: 300000000 [ 10.902198] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: ref_clk, rate: 1000 [ 10.902237] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: tx_lane0_sync_clk, rate: 0 [ 10.902276] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: rx_lane0_sync_clk, rate: 0 [ 10.902317] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: rx_lane1_sync_clk, rate: 0 [ 10.902346] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: core_clk enabled [ 10.902353] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: bus_aggr_clk enabled [ 10.902359] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: iface_clk enabled [ 10.902367] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: core_clk_unipro enabled [ 10.902376] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: core_clk_ice enabled [ 10.902382] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: ref_clk enabled [ 10.902386] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: tx_lane0_sync_clk enabled [ 10.902391] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: rx_lane0_sync_clk enabled [ 10.902395] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: rx_lane1_sync_clk enabled [ 10.905993] ufshcd-qcom 1da4000.ufshc: ufs_qcom_update_sec_cfg: failed, ret -22 scm_ret 0 [ 10.906001] ufshcd-qcom 1da4000.ufshc: ufs_qcom_update_sec_cfg: ip: restore_sec_cfg 1, op: restore_sec_cfg 0, ret -22 scm_ret 0 [ 10.907535] ufshcd-qcom 1da4000.ufshc: ufs_qcom_parse_reg_info: Unable to find qcom,vddp-ref-clk-supply regulator, assuming enabled [ 10.911697] scsi host0: ufshcd [ 10.918627] qcom_ice 1db0000.ufsice: QC ICE 3.0.65 device found @0xffffff800cde0000 [ 10.949115] ufshcd-qcom 1da4000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0 [ 10.949860] ufshcd_wait_for_dev_cmd: time_left=3 [ 10.949870] ufshcd_wait_for_dev_cmd = 0 [ 11.127287] ufshcd_wait_for_dev_cmd: time_left=132 [ 11.127304] ufshcd_wait_for_dev_cmd = 0 [ 11.127988] ufshcd_wait_for_dev_cmd: time_left=150 [ 11.128000] ufshcd_wait_for_dev_cmd = 0 [ 11.128937] ufshcd_wait_for_dev_cmd: time_left=150 [ 11.128954] ufshcd_wait_for_dev_cmd = 0 [ 11.130130] ufshcd_wait_for_dev_cmd: time_left=149 [ 11.130145] ufshcd_wait_for_dev_cmd = 0 [ 11.131850] ufshcd_wait_for_dev_cmd: time_left=150 [ 11.131863] ufshcd_wait_for_dev_cmd = 0 [ 11.132574] ufshcd_wait_for_dev_cmd: time_left=150 [ 11.132586] ufshcd_wait_for_dev_cmd = 0 [ 11.139512] ufshcd-qcom 1da4000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[2, 2], pwr[FAST MODE, FAST MODE], rate = 2 [ 11.139611] ufshcd_wait_for_dev_cmd: time_left=150 [ 11.139615] ufshcd_wait_for_dev_cmd = 0 [ 11.139663] ufshcd_wait_for_dev_cmd: time_left=150 [ 11.139670] ufshcd_wait_for_dev_cmd = 0 [ 11.139680] ufshcd-qcom 1da4000.ufshc: ufshcd_init_icc_levels: setting icc_level 0xf [ 11.139721] ufshcd_wait_for_dev_cmd: time_left=150 [ 11.139726] ufshcd_wait_for_dev_cmd = 0 [ 11.140594] ufshcd-qcom 1da4000.ufshc: ufshcd_set_queue_depth: activate tcq with queue depth 1 [ 11.145001] ufshcd-qcom 1da4000.ufshc: ufshcd_set_queue_depth: activate tcq with queue depth 1 [ 11.149027] ufshcd_wait_for_dev_cmd: time_left=150 [ 11.149032] ufshcd_wait_for_dev_cmd = 0 [ 11.149044] ufshcd-qcom 1da4000.ufshc: ufshcd_set_queue_depth: activate tcq with queue depth 32 [ 11.154304] ufshcd_wait_for_dev_cmd: time_left=150 [ 11.154310] ufshcd_wait_for_dev_cmd = 0 [ 11.154324] ufshcd-qcom 1da4000.ufshc: ufshcd_set_queue_depth: activate tcq with queue depth 32 [ 11.157775] ufshcd_wait_for_dev_cmd: time_left=150 [ 11.157780] ufshcd_wait_for_dev_cmd = 0 [ 11.157793] ufshcd-qcom 1da4000.ufshc: ufshcd_set_queue_depth: activate tcq with queue depth 32 [ 11.161038] ufshcd_wait_for_dev_cmd: time_left=150 [ 11.161044] ufshcd_wait_for_dev_cmd = 0 [ 11.161058] ufshcd-qcom 1da4000.ufshc: ufshcd_set_queue_depth: activate tcq with queue depth 32 [ 11.164347] ufshcd_wait_for_dev_cmd: time_left=150 [ 11.164353] ufshcd_wait_for_dev_cmd = 0 [ 11.164367] ufshcd-qcom 1da4000.ufshc: ufshcd_set_queue_depth: activate tcq with queue depth 32 [ 11.167598] ufshcd_wait_for_dev_cmd: time_left=150 [ 11.167604] ufshcd_wait_for_dev_cmd = 0 [ 11.167618] ufshcd-qcom 1da4000.ufshc: ufshcd_set_queue_depth: activate tcq with queue depth 32 [ 11.170837] ufshcd_wait_for_dev_cmd: time_left=150 [ 11.170842] ufshcd_wait_for_dev_cmd = 0 [ 11.170855] ufshcd-qcom 1da4000.ufshc: ufshcd_set_queue_depth: activate tcq with queue depth 32 [ 11.198008] ufshcd-qcom 1da4000.ufshc: __ufshcd_uic_hibern8_enter: Hibern8 Enter at 11197983 us [ 11.198098] ufshcd-qcom 1da4000.ufshc: ufshcd_set_clk_freq: clk: core_clk, rate: 50000000 [ 11.198105] ufshcd-qcom 1da4000.ufshc: ufshcd_set_clk_freq: clk: bus_aggr_clk, rate: 50000000 [ 11.198111] ufshcd-qcom 1da4000.ufshc: ufshcd_set_clk_freq: clk: iface_clk, rate: 0 [ 11.198150] ufshcd-qcom 1da4000.ufshc: ufshcd_set_clk_freq: clk: core_clk_unipro, rate: 37500000 [ 11.198184] ufshcd-qcom 1da4000.ufshc: ufshcd_set_clk_freq: clk: core_clk_ice, rate: 75000000 [ 11.198193] ufshcd-qcom 1da4000.ufshc: ufshcd_set_clk_freq: clk: ref_clk, rate: 1000 [ 11.198199] ufshcd-qcom 1da4000.ufshc: ufshcd_set_clk_freq: clk: tx_lane0_sync_clk, rate: 0 [ 11.198205] ufshcd-qcom 1da4000.ufshc: ufshcd_set_clk_freq: clk: rx_lane0_sync_clk, rate: 0 [ 11.198210] ufshcd-qcom 1da4000.ufshc: ufshcd_set_clk_freq: clk: rx_lane1_sync_clk, rate: 0 [ 11.198879] ufshcd-qcom 1da4000.ufshc: ufshcd_uic_hibern8_exit: Hibern8 Exit at 11198863 us [ 11.227539] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: core_clk disabled [ 11.227546] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: bus_aggr_clk disabled [ 11.227554] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: iface_clk disabled [ 11.227563] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: core_clk_unipro disabled [ 11.227569] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: core_clk_ice disabled [ 11.227575] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: ref_clk disabled [ 11.227578] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: tx_lane0_sync_clk disabled [ 11.227582] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: rx_lane0_sync_clk disabled [ 11.227586] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: rx_lane1_sync_clk disabled [ 11.242041] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: core_clk enabled [ 11.242053] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: bus_aggr_clk enabled [ 11.242065] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: iface_clk enabled [ 11.242087] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: core_clk_unipro enabled [ 11.242109] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: core_clk_ice enabled [ 11.242122] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: ref_clk enabled [ 11.242132] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: tx_lane0_sync_clk enabled [ 11.242143] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: rx_lane0_sync_clk enabled [ 11.242155] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: rx_lane1_sync_clk enabled [ 11.256394] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: core_clk disabled [ 11.256402] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: bus_aggr_clk disabled [ 11.256408] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: iface_clk disabled [ 11.256420] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: core_clk_unipro disabled [ 11.256432] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: core_clk_ice disabled [ 11.256438] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: ref_clk disabled [ 11.256447] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: tx_lane0_sync_clk disabled [ 11.256452] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: rx_lane0_sync_clk disabled [ 11.256459] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: rx_lane1_sync_clk disabled [ 14.194451] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: core_clk enabled [ 14.194489] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: bus_aggr_clk enabled [ 14.200933] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: iface_clk enabled [ 14.208734] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: core_clk_unipro enabled [ 14.216210] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: core_clk_ice enabled [ 14.224450] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: ref_clk enabled [ 14.232171] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: tx_lane0_sync_clk enabled [ 14.239633] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: rx_lane0_sync_clk enabled [ 14.247713] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: rx_lane1_sync_clk enabled [ 14.269093] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: core_clk disabled [ 14.271502] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: bus_aggr_clk disabled [ 14.287195] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: iface_clk disabled [ 14.291435] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: core_clk_unipro disabled [ 14.298666] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: core_clk_ice disabled [ 14.307033] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: ref_clk disabled [ 14.314820] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: tx_lane0_sync_clk disabled [ 14.322484] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: rx_lane0_sync_clk disabled [ 14.330536] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: rx_lane1_sync_clk disabled [ 14.725012] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: core_clk enabled [ 14.725066] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: bus_aggr_clk enabled [ 14.731732] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: iface_clk enabled [ 14.739323] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: core_clk_unipro enabled [ 14.747247] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: core_clk_ice enabled [ 14.755486] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: ref_clk enabled [ 14.770343] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: tx_lane0_sync_clk enabled [ 14.793188] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: rx_lane0_sync_clk enabled [ 14.801080] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: rx_lane1_sync_clk enabled [ 14.815579] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 14.815644] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 14.816320] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 14.816419] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 14.816466] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 14.816596] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 14.840620] ufshcd-qcom 1da4000.ufshc: __ufshcd_uic_hibern8_enter: Hibern8 Enter at 14840602 us [ 14.840834] ufshcd-qcom 1da4000.ufshc: ufshcd_set_clk_freq: clk: core_clk, rate: 200000000 [ 14.840837] ufshcd-qcom 1da4000.ufshc: ufshcd_set_clk_freq: clk: bus_aggr_clk, rate: 200000000 [ 14.840840] ufshcd-qcom 1da4000.ufshc: ufshcd_set_clk_freq: clk: iface_clk, rate: 0 [ 14.840851] ufshcd-qcom 1da4000.ufshc: ufshcd_set_clk_freq: clk: core_clk_unipro, rate: 150000000 [ 14.840861] ufshcd-qcom 1da4000.ufshc: ufshcd_set_clk_freq: clk: core_clk_ice, rate: 300000000 [ 14.840864] ufshcd-qcom 1da4000.ufshc: ufshcd_set_clk_freq: clk: ref_clk, rate: 1000 [ 14.840866] ufshcd-qcom 1da4000.ufshc: ufshcd_set_clk_freq: clk: tx_lane0_sync_clk, rate: 0 [ 14.840868] ufshcd-qcom 1da4000.ufshc: ufshcd_set_clk_freq: clk: rx_lane0_sync_clk, rate: 0 [ 14.840870] ufshcd-qcom 1da4000.ufshc: ufshcd_set_clk_freq: clk: rx_lane1_sync_clk, rate: 0 [ 14.841385] ufshcd-qcom 1da4000.ufshc: ufshcd_uic_hibern8_exit: Hibern8 Exit at 14841370 us [ 14.867089] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 14.867950] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 14.869532] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 14.869857] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 14.875615] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 14.880551] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 14.890984] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 14.892353] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 14.894644] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 14.894988] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 14.895910] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 14.911272] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 14.919013] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 14.970413] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: core_clk disabled [ 14.970426] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: bus_aggr_clk disabled [ 14.970434] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: iface_clk disabled [ 14.970446] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: core_clk_unipro disabled [ 14.970610] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: core_clk_ice disabled [ 14.970615] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: ref_clk disabled [ 14.970622] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: tx_lane0_sync_clk disabled [ 14.970628] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: rx_lane0_sync_clk disabled [ 14.970635] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: rx_lane1_sync_clk disabled [ 15.108525] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: core_clk enabled [ 15.109274] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: bus_aggr_clk enabled [ 15.116973] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: iface_clk enabled [ 15.125152] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: core_clk_unipro enabled [ 15.132215] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: core_clk_ice enabled [ 15.140499] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: ref_clk enabled [ 15.148158] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: tx_lane0_sync_clk enabled [ 15.155642] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: rx_lane0_sync_clk enabled [ 15.163708] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: rx_lane1_sync_clk enabled [ 15.215754] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 15.220335] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 15.220910] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 15.233205] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 15.241491] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 15.263730] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 15.277648] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 15.291173] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 15.292187] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 15.297278] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 15.297737] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 15.300772] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 15.303989] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 15.309161] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 15.320267] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 15.324303] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 15.324971] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 15.334552] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 15.345729] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 15.355783] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 15.364341] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 15.370772] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 15.387535] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 15.394784] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 15.395099] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 15.395367] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 15.412905] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 15.414516] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 15.416494] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 15.422052] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 15.425196] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 15.434301] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 15.434421] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 15.442507] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 15.446766] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 15.450458] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 15.455773] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 15.468107] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 15.471003] ufshcd-qcom 1da4000.ufshc: ufshcd_ioctl: User buffer is NULL! [ 15.519085] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: core_clk disabled [ 15.519131] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: bus_aggr_clk disabled [ 15.525798] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: iface_clk disabled [ 15.533741] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: core_clk_unipro disabled [ 15.541088] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: core_clk_ice disabled [ 15.557222] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: ref_clk disabled [ 15.563667] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: tx_lane0_sync_clk disabled [ 15.571143] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: rx_lane0_sync_clk disabled [ 15.579338] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: rx_lane1_sync_clk disabled [ 17.939055] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: core_clk enabled [ 17.939105] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: bus_aggr_clk enabled [ 17.946146] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: iface_clk enabled [ 17.953435] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: core_clk_unipro enabled [ 17.960861] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: core_clk_ice enabled [ 17.969103] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: ref_clk enabled [ 17.976821] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: tx_lane0_sync_clk enabled [ 17.984314] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: rx_lane0_sync_clk enabled [ 17.992406] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: rx_lane1_sync_clk enabled [ 18.075579] ufshcd-qcom 1da4000.ufshc: __ufshcd_uic_hibern8_enter: Hibern8 Enter at 18075560 us [ 18.075637] ufshcd-qcom 1da4000.ufshc: ufshcd_set_clk_freq: clk: core_clk, rate: 50000000 [ 18.083140] ufshcd-qcom 1da4000.ufshc: ufshcd_set_clk_freq: clk: bus_aggr_clk, rate: 50000000 [ 18.091486] ufshcd-qcom 1da4000.ufshc: ufshcd_set_clk_freq: clk: iface_clk, rate: 0 [ 18.099936] ufshcd-qcom 1da4000.ufshc: ufshcd_set_clk_freq: clk: core_clk_unipro, rate: 37500000 [ 18.107463] ufshcd-qcom 1da4000.ufshc: ufshcd_set_clk_freq: clk: core_clk_ice, rate: 75000000 [ 18.116439] ufshcd-qcom 1da4000.ufshc: ufshcd_set_clk_freq: clk: ref_clk, rate: 1000 [ 18.124859] ufshcd-qcom 1da4000.ufshc: ufshcd_set_clk_freq: clk: tx_lane0_sync_clk, rate: 0 [ 18.132665] ufshcd-qcom 1da4000.ufshc: ufshcd_set_clk_freq: clk: rx_lane0_sync_clk, rate: 0 [ 18.140928] ufshcd-qcom 1da4000.ufshc: ufshcd_set_clk_freq: clk: rx_lane1_sync_clk, rate: 0 [ 18.152292] ufshcd-qcom 1da4000.ufshc: ufshcd_uic_hibern8_exit: Hibern8 Exit at 18152274 us [ 18.168689] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: core_clk disabled [ 18.168743] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: bus_aggr_clk disabled [ 18.175526] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: iface_clk disabled [ 18.184057] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: core_clk_unipro disabled [ 18.190639] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: core_clk_ice disabled [ 18.198949] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: ref_clk disabled [ 18.206797] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: tx_lane0_sync_clk disabled [ 18.214324] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: rx_lane0_sync_clk disabled [ 18.222492] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: rx_lane1_sync_clk disabled [ 18.868493] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: core_clk enabled [ 18.868543] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: bus_aggr_clk enabled [ 18.875510] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: iface_clk enabled [ 18.883318] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: core_clk_unipro enabled [ 18.890270] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: core_clk_ice enabled [ 18.898541] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: ref_clk enabled [ 18.906244] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: tx_lane0_sync_clk enabled [ 18.913690] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: rx_lane0_sync_clk enabled [ 18.921923] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: rx_lane1_sync_clk enabled [ 18.931224] ufshcd_wait_for_dev_cmd: time_left=150 [ 18.938236] ufshcd_wait_for_dev_cmd = 0 [ 18.945163] ufshcd-qcom 1da4000.ufshc: __ufshcd_uic_hibern8_enter: Hibern8 Enter at 18945144 us [ 18.949218] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: core_clk disabled [ 18.955483] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: bus_aggr_clk disabled [ 18.963097] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: iface_clk disabled [ 18.970992] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: core_clk_unipro disabled [ 18.978531] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: core_clk_ice disabled [ 18.986876] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: ref_clk disabled [ 18.995192] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: tx_lane0_sync_clk disabled [ 19.002740] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: rx_lane0_sync_clk disabled [ 19.010895] ufshcd-qcom 1da4000.ufshc: ufshcd_setup_clocks: clk: rx_lane1_sync_clk disabled
On 12/4/2018 9:17 AM, Marc Gonzalez wrote: > > I booted a downstream kernel with UFS debug enabled (log provided below) > > The one difference that jumps out at me is: > > DOWNSTREAM > [ 10.902119] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: core_clk_unipro, rate: 150000000 > [ 10.902161] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: core_clk_ice, rate: 300000000 > [ 10.902198] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: ref_clk, rate: 1000 > > UPSTREAM > [ 2.072820] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: core_clk_unipro, rate: 0 > [ 2.080304] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: core_clk_ice, rate: 0 > [ 2.088547] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: ref_clk, rate: 0 > > > Jeffrey, I will check the regulators per your suggestion. > I'm all ears if you have suggestions for the clocks as well. > Hmm, this is interesting. I know you mentioned before that the clock rates were 0. Even with the downstream kernel, I've seen clock rates be zero (for other usecases). Since we have a delta between downstream and upstream, that seems significant. When I've seen a clock keep its rate 0 like this, its been because of a bad parent. You can check this in upstream via debugfs - <debugfs>/clk/clk_summary In downstream, I recall having to go into the individual clock sub directory, and reading the parent file. However, maybe a simple solution. Do you have https://patchwork.codeaurora.org/patch/657871/ ?
On 04/12/2018 17:35, Jeffrey Hugo wrote: > On 12/4/2018 9:17 AM, Marc Gonzalez wrote: > >> I booted a downstream kernel with UFS debug enabled (log provided below) >> >> The one difference that jumps out at me is: >> >> DOWNSTREAM >> [ 10.902119] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: core_clk_unipro, rate: 150000000 >> [ 10.902161] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: core_clk_ice, rate: 300000000 >> [ 10.902198] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: ref_clk, rate: 1000 >> >> UPSTREAM >> [ 2.072820] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: core_clk_unipro, rate: 0 >> [ 2.080304] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: core_clk_ice, rate: 0 >> [ 2.088547] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: ref_clk, rate: 0 >> >> >> Jeffrey, I will check the regulators per your suggestion. >> I'm all ears if you have suggestions for the clocks as well. > > Hmm, this is interesting. > > I know you mentioned before that the clock rates were 0. Even with the > downstream kernel, I've seen clock rates be zero (for other use-cases). > > Since we have a delta between downstream and upstream, that seems > significant. > > When I've seen a clock keep its rate 0 like this, its been because of a > bad parent. You can check this in upstream via debugfs - > <debugfs>/clk/clk_summary > In downstream, I recall having to go into the individual clock sub > directory, and reading the parent file. > > However, maybe a simple solution. Do you have > https://patchwork.codeaurora.org/patch/657871/ ? Yep! $ git show --pretty=fuller 79bf268a13bf commit 79bf268a13bf24e46db54fd836807fdfccaf7d59 Author: Jeffrey Hugo <jhugo@codeaurora.org> AuthorDate: Thu Nov 15 13:44:53 2018 -0700 Commit: Marc Gonzalez <marc.w.gonzalez@free.fr> CommitDate: Thu Nov 29 10:03:33 2018 +0100 arm64: dts: qcom: msm8998: correct xo clock name Not sure I have the clk debug config knob, /sys/kernel/debug is empty. I'm off to tweak :-) Regards.
On 12/4/2018 10:03 AM, Marc Gonzalez wrote: > On 04/12/2018 17:35, Jeffrey Hugo wrote: > >> On 12/4/2018 9:17 AM, Marc Gonzalez wrote: >> >>> I booted a downstream kernel with UFS debug enabled (log provided below) >>> >>> The one difference that jumps out at me is: >>> >>> DOWNSTREAM >>> [ 10.902119] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: core_clk_unipro, rate: 150000000 >>> [ 10.902161] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: core_clk_ice, rate: 300000000 >>> [ 10.902198] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: ref_clk, rate: 1000 >>> >>> UPSTREAM >>> [ 2.072820] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: core_clk_unipro, rate: 0 >>> [ 2.080304] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: core_clk_ice, rate: 0 >>> [ 2.088547] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: ref_clk, rate: 0 >>> >>> >>> Jeffrey, I will check the regulators per your suggestion. >>> I'm all ears if you have suggestions for the clocks as well. >> >> Hmm, this is interesting. >> >> I know you mentioned before that the clock rates were 0. Even with the >> downstream kernel, I've seen clock rates be zero (for other use-cases). >> >> Since we have a delta between downstream and upstream, that seems >> significant. >> >> When I've seen a clock keep its rate 0 like this, its been because of a >> bad parent. You can check this in upstream via debugfs - >> <debugfs>/clk/clk_summary >> In downstream, I recall having to go into the individual clock sub >> directory, and reading the parent file. >> >> However, maybe a simple solution. Do you have >> https://patchwork.codeaurora.org/patch/657871/ ? > > Yep! > > $ git show --pretty=fuller 79bf268a13bf > commit 79bf268a13bf24e46db54fd836807fdfccaf7d59 > Author: Jeffrey Hugo <jhugo@codeaurora.org> > AuthorDate: Thu Nov 15 13:44:53 2018 -0700 > Commit: Marc Gonzalez <marc.w.gonzalez@free.fr> > CommitDate: Thu Nov 29 10:03:33 2018 +0100 > > arm64: dts: qcom: msm8998: correct xo clock name > > > Not sure I have the clk debug config knob, /sys/kernel/debug is empty. > I'm off to tweak :-) mount -t debugfs none /sys/kernel/debug
On 04/12/2018 18:05, Jeffrey Hugo wrote:
> mount -t debugfs none /sys/kernel/debug
Doh!
# cat /sys/kernel/debug/clk/clk_summary
enable prepare protect duty
clock count count count rate accuracy phase cycle
---------------------------------------------------------------------------------------------
gcc_usb_phy_cfg_ahb2phy_clk 0 0 0 0 0 0 50000
gcc_usb3_phy_pipe_clk 0 0 0 0 0 0 50000
gcc_usb30_sleep_clk 0 0 0 0 0 0 50000
gcc_ufs_unipro_core_clk 0 0 0 0 0 0 50000
gcc_ufs_tx_symbol_0_clk 0 0 0 0 0 0 50000
gcc_ufs_rx_symbol_1_clk 0 0 0 0 0 0 50000
gcc_ufs_rx_symbol_0_clk 0 0 0 0 0 0 50000
gcc_ufs_phy_aux_clk 0 0 0 0 0 0 50000
gcc_ufs_ice_core_clk 0 0 0 0 0 0 50000
gcc_ufs_ahb_clk 0 0 0 0 0 0 50000
gcc_tsif_inactivity_timers_clk 0 0 0 0 0 0 50000
gcc_tsif_ahb_clk 0 0 0 0 0 0 50000
gcc_sdcc4_ahb_clk 0 0 0 0 0 0 50000
gcc_sdcc2_ahb_clk 0 0 0 0 0 0 50000
gcc_prng_ahb_clk 0 0 0 0 0 0 50000
gcc_pdm_xo4_clk 0 0 0 0 0 0 50000
gcc_pdm_ahb_clk 0 0 0 0 0 0 50000
gcc_pcie_0_slv_axi_clk 0 0 0 0 0 0 50000
gcc_pcie_0_pipe_clk 0 0 0 0 0 0 50000
gcc_pcie_0_mstr_axi_clk 0 0 0 0 0 0 50000
gcc_pcie_0_cfg_ahb_clk 0 0 0 0 0 0 50000
gcc_mss_at_clk 0 0 0 0 0 0 50000
gcc_mmss_sys_noc_axi_clk 0 0 0 0 0 0 50000
gcc_mmss_qm_core_clk 0 0 0 0 0 0 50000
gcc_mmss_qm_ahb_clk 0 0 0 0 0 0 50000
gcc_mmss_noc_cfg_ahb_clk 0 0 0 0 0 0 50000
gcc_lpass_trig_clk 0 0 0 0 0 0 50000
gcc_lpass_at_clk 1 1 0 0 0 0 50000
gcc_hmss_trig_clk 0 0 0 0 0 0 50000
gcc_hmss_dvm_bus_clk 1 1 0 0 0 0 50000
gcc_hmss_at_clk 0 0 0 0 0 0 50000
gcc_gpu_snoc_dvm_gfx_clk 0 0 0 0 0 0 50000
gcc_gpu_cfg_ahb_clk 0 0 0 0 0 0 50000
gcc_gpu_bimc_gfx_src_clk 0 0 0 0 0 0 50000
gcc_gpu_bimc_gfx_clk 0 0 0 0 0 0 50000
gcc_blsp2_sleep_clk 0 0 0 0 0 0 50000
gcc_blsp2_ahb_clk 3 3 0 0 0 0 50000
gcc_blsp1_sleep_clk 0 0 0 0 0 0 50000
gcc_blsp1_ahb_clk 0 0 0 0 0 0 50000
gcc_bimc_mss_q6_axi_clk 0 0 0 0 0 0 50000
gcc_bimc_hmss_axi_clk 0 0 0 0 0 0 50000
gcc_apss_qdss_tsctr_div8_clk 0 0 0 0 0 0 50000
gcc_apss_qdss_tsctr_div2_clk 0 0 0 0 0 0 50000
gcc_aggre1_noc_xo_clk 0 0 0 0 0 0 50000
sleep_clk 0 0 0 32764 0 0 50000
xo 1 1 0 19200000 0 0 50000
gcc_rx1_usb2_clkref_clk 0 0 0 19200000 0 0 50000
gcc_pcie_clkref_clk 0 0 0 19200000 0 0 50000
gcc_ufs_clkref_clk 0 0 0 19200000 0 0 50000
gcc_hdmi_clkref_clk 0 0 0 19200000 0 0 50000
gcc_usb3_clkref_clk 0 0 0 19200000 0 0 50000
usb3_phy_aux_clk_src 0 0 0 1200000 0 0 50000
gcc_usb3_phy_aux_clk 0 0 0 1200000 0 0 50000
usb30_mock_utmi_clk_src 0 0 0 19200000 0 0 50000
gcc_usb30_mock_utmi_clk 0 0 0 19200000 0 0 50000
tsif_ref_clk_src 0 0 0 19200000 0 0 50000
gcc_tsif_ref_clk 0 0 0 19200000 0 0 50000
sdcc4_apps_clk_src 0 0 0 19200000 0 0 50000
gcc_sdcc4_apps_clk 0 0 0 19200000 0 0 50000
sdcc2_apps_clk_src 0 0 0 19200000 0 0 50000
gcc_sdcc2_apps_clk 0 0 0 19200000 0 0 50000
pdm2_clk_src 0 0 0 19200000 0 0 50000
gcc_pdm2_clk 0 0 0 19200000 0 0 50000
pcie_aux_clk_src 0 0 0 19200000 0 0 50000
gcc_pcie_0_aux_clk 0 0 0 19200000 0 0 50000
gcc_pcie_phy_aux_clk 0 0 0 19200000 0 0 50000
hmss_rbcpr_clk_src 0 0 0 19200000 0 0 50000
gcc_hmss_rbcpr_clk 0 0 0 19200000 0 0 50000
hmss_ahb_clk_src 0 0 0 19200000 0 0 50000
gcc_hmss_ahb_clk 0 0 0 19200000 0 0 50000
gpll4 0 0 0 384000000 0 0 50000
gpll4_out_test 0 0 0 384000000 0 0 50000
gpll4_out_odd 0 0 0 384000000 0 0 50000
gpll4_out_main 0 0 0 384000000 0 0 50000
gpll4_out_even 0 0 0 384000000 0 0 50000
gpll3 0 0 0 921600000 0 0 50000
gpll3_out_test 0 0 0 921600000 0 0 50000
gpll3_out_odd 0 0 0 921600000 0 0 50000
gpll3_out_main 0 0 0 921600000 0 0 50000
gpll3_out_even 0 0 0 921600000 0 0 50000
gpll2 0 0 0 1286400000 0 0 50000
gpll2_out_test 0 0 0 1286400000 0 0 50000
gpll2_out_odd 0 0 0 1286400000 0 0 50000
gpll2_out_main 0 0 0 1286400000 0 0 50000
gpll2_out_even 0 0 0 1286400000 0 0 50000
gpll1 0 0 0 1056000000 0 0 50000
gpll1_out_test 0 0 0 1056000000 0 0 50000
gpll1_out_odd 0 0 0 1056000000 0 0 50000
gpll1_out_main 0 0 0 1056000000 0 0 50000
gpll1_out_even 0 0 0 1056000000 0 0 50000
gpll0 0 0 0 595200000 0 0 50000
gpll0_out_test 0 0 0 595200000 0 0 50000
gpll0_out_odd 0 0 0 595200000 0 0 50000
gpll0_out_main 0 0 0 595200000 0 0 50000
usb30_master_clk_src 0 0 0 119040000 0 0 50000
gcc_aggre1_usb3_axi_clk 0 0 0 119040000 0 0 50000
gcc_cfg_noc_usb3_axi_clk 0 0 0 119040000 0 0 50000
gcc_usb30_master_clk 0 0 0 119040000 0 0 50000
ufs_axi_clk_src 0 0 0 198400000 0 0 50000
gcc_aggre1_ufs_axi_clk 0 0 0 198400000 0 0 50000
gcc_ufs_axi_clk 0 0 0 198400000 0 0 50000
gpll0_out_even 0 0 0 595200000 0 0 50000
gp3_clk_src 0 0 0 19200000 0 0 50000
gcc_gp3_clk 0 0 0 19200000 0 0 50000
gp2_clk_src 0 0 0 19200000 0 0 50000
gcc_gp2_clk 0 0 0 19200000 0 0 50000
gp1_clk_src 0 0 0 19200000 0 0 50000
gcc_gp1_clk 0 0 0 19200000 0 0 50000
blsp2_uart3_apps_clk_src 0 0 0 19200000 0 0 50000
gcc_blsp2_uart3_apps_clk 0 0 0 19200000 0 0 50000
blsp2_uart2_apps_clk_src 1 1 0 1843200 0 0 50000
gcc_blsp2_uart2_apps_clk 3 3 0 1843200 0 0 50000
blsp2_uart1_apps_clk_src 0 0 0 19200000 0 0 50000
gcc_blsp2_uart1_apps_clk 0 0 0 19200000 0 0 50000
blsp2_qup6_spi_apps_clk_src 0 0 0 19200000 0 0 50000
gcc_blsp2_qup6_spi_apps_clk 0 0 0 19200000 0 0 50000
blsp2_qup6_i2c_apps_clk_src 0 0 0 19200000 0 0 50000
gcc_blsp2_qup6_i2c_apps_clk 0 0 0 19200000 0 0 50000
blsp2_qup5_spi_apps_clk_src 0 0 0 19200000 0 0 50000
gcc_blsp2_qup5_spi_apps_clk 0 0 0 19200000 0 0 50000
blsp2_qup5_i2c_apps_clk_src 0 0 0 19200000 0 0 50000
gcc_blsp2_qup5_i2c_apps_clk 0 0 0 19200000 0 0 50000
blsp2_qup4_spi_apps_clk_src 0 0 0 19200000 0 0 50000
gcc_blsp2_qup4_spi_apps_clk 0 0 0 19200000 0 0 50000
blsp2_qup4_i2c_apps_clk_src 0 0 0 19200000 0 0 50000
gcc_blsp2_qup4_i2c_apps_clk 0 0 0 19200000 0 0 50000
blsp2_qup3_spi_apps_clk_src 0 0 0 19200000 0 0 50000
gcc_blsp2_qup3_spi_apps_clk 0 0 0 19200000 0 0 50000
blsp2_qup3_i2c_apps_clk_src 0 0 0 19200000 0 0 50000
gcc_blsp2_qup3_i2c_apps_clk 0 0 0 19200000 0 0 50000
blsp2_qup2_spi_apps_clk_src 0 0 0 19200000 0 0 50000
gcc_blsp2_qup2_spi_apps_clk 0 0 0 19200000 0 0 50000
blsp2_qup2_i2c_apps_clk_src 0 0 0 19200000 0 0 50000
gcc_blsp2_qup2_i2c_apps_clk 0 0 0 19200000 0 0 50000
blsp2_qup1_spi_apps_clk_src 0 0 0 19200000 0 0 50000
gcc_blsp2_qup1_spi_apps_clk 0 0 0 19200000 0 0 50000
blsp2_qup1_i2c_apps_clk_src 0 0 0 19200000 0 0 50000
gcc_blsp2_qup1_i2c_apps_clk 0 0 0 19200000 0 0 50000
blsp1_uart3_apps_clk_src 0 0 0 19200000 0 0 50000
gcc_blsp1_uart3_apps_clk 0 0 0 19200000 0 0 50000
blsp1_uart2_apps_clk_src 0 0 0 19200000 0 0 50000
gcc_blsp1_uart2_apps_clk 0 0 0 19200000 0 0 50000
blsp1_uart1_apps_clk_src 0 0 0 19200000 0 0 50000
gcc_blsp1_uart1_apps_clk 0 0 0 19200000 0 0 50000
blsp1_qup6_spi_apps_clk_src 0 0 0 19200000 0 0 50000
gcc_blsp1_qup6_spi_apps_clk 0 0 0 19200000 0 0 50000
blsp1_qup6_i2c_apps_clk_src 0 0 0 19200000 0 0 50000
gcc_blsp1_qup6_i2c_apps_clk 0 0 0 19200000 0 0 50000
blsp1_qup5_spi_apps_clk_src 0 0 0 19200000 0 0 50000
gcc_blsp1_qup5_spi_apps_clk 0 0 0 19200000 0 0 50000
blsp1_qup5_i2c_apps_clk_src 0 0 0 19200000 0 0 50000
gcc_blsp1_qup5_i2c_apps_clk 0 0 0 19200000 0 0 50000
blsp1_qup4_spi_apps_clk_src 0 0 0 19200000 0 0 50000
gcc_blsp1_qup4_spi_apps_clk 0 0 0 19200000 0 0 50000
blsp1_qup4_i2c_apps_clk_src 0 0 0 19200000 0 0 50000
gcc_blsp1_qup4_i2c_apps_clk 0 0 0 19200000 0 0 50000
blsp1_qup3_spi_apps_clk_src 0 0 0 19200000 0 0 50000
gcc_blsp1_qup3_spi_apps_clk 0 0 0 19200000 0 0 50000
blsp1_qup3_i2c_apps_clk_src 0 0 0 19200000 0 0 50000
gcc_blsp1_qup3_i2c_apps_clk 0 0 0 19200000 0 0 50000
blsp1_qup2_spi_apps_clk_src 0 0 0 19200000 0 0 50000
gcc_blsp1_qup2_spi_apps_clk 0 0 0 19200000 0 0 50000
blsp1_qup2_i2c_apps_clk_src 0 0 0 19200000 0 0 50000
gcc_blsp1_qup2_i2c_apps_clk 0 0 0 19200000 0 0 50000
blsp1_qup1_spi_apps_clk_src 0 0 0 19200000 0 0 50000
gcc_blsp1_qup1_spi_apps_clk 0 0 0 19200000 0 0 50000
blsp1_qup1_i2c_apps_clk_src 0 0 0 19200000 0 0 50000
gcc_blsp1_qup1_i2c_apps_clk 0 0 0 19200000 0 0 50000
ln_bb_a_clk1 0 0 0 0 0 0 50000
ln_bb_clk1 0 0 0 0 0 0 50000
There is no clock summary in 4.4 to compare the downstream kernel?
Regards.
On 12/4/2018 10:11 AM, Marc Gonzalez wrote: > On 04/12/2018 18:05, Jeffrey Hugo wrote: > >> mount -t debugfs none /sys/kernel/debug > > Doh! > > # cat /sys/kernel/debug/clk/clk_summary > enable prepare protect duty > clock count count count rate accuracy phase cycle > --------------------------------------------------------------------------------------------- > gcc_usb_phy_cfg_ahb2phy_clk 0 0 0 0 0 0 50000 > gcc_usb3_phy_pipe_clk 0 0 0 0 0 0 50000 > gcc_usb30_sleep_clk 0 0 0 0 0 0 50000 > gcc_ufs_unipro_core_clk 0 0 0 0 0 0 50000 Yeah, this clock has no parent, and is one of the ones that is a delta from the downsteam per your logs. > gcc_ufs_tx_symbol_0_clk 0 0 0 0 0 0 50000 > gcc_ufs_rx_symbol_1_clk 0 0 0 0 0 0 50000 > gcc_ufs_rx_symbol_0_clk 0 0 0 0 0 0 50000 > gcc_ufs_phy_aux_clk 0 0 0 0 0 0 50000 > gcc_ufs_ice_core_clk 0 0 0 0 0 0 50000 > gcc_ufs_ahb_clk 0 0 0 0 0 0 50000 > gcc_tsif_inactivity_timers_clk 0 0 0 0 0 0 50000 > gcc_tsif_ahb_clk 0 0 0 0 0 0 50000 > gcc_sdcc4_ahb_clk 0 0 0 0 0 0 50000 > gcc_sdcc2_ahb_clk 0 0 0 0 0 0 50000 > gcc_prng_ahb_clk 0 0 0 0 0 0 50000 > gcc_pdm_xo4_clk 0 0 0 0 0 0 50000 > gcc_pdm_ahb_clk 0 0 0 0 0 0 50000 > gcc_pcie_0_slv_axi_clk 0 0 0 0 0 0 50000 > gcc_pcie_0_pipe_clk 0 0 0 0 0 0 50000 > gcc_pcie_0_mstr_axi_clk 0 0 0 0 0 0 50000 > gcc_pcie_0_cfg_ahb_clk 0 0 0 0 0 0 50000 > gcc_mss_at_clk 0 0 0 0 0 0 50000 > gcc_mmss_sys_noc_axi_clk 0 0 0 0 0 0 50000 > gcc_mmss_qm_core_clk 0 0 0 0 0 0 50000 > gcc_mmss_qm_ahb_clk 0 0 0 0 0 0 50000 > gcc_mmss_noc_cfg_ahb_clk 0 0 0 0 0 0 50000 > gcc_lpass_trig_clk 0 0 0 0 0 0 50000 > gcc_lpass_at_clk 1 1 0 0 0 0 50000 > gcc_hmss_trig_clk 0 0 0 0 0 0 50000 > gcc_hmss_dvm_bus_clk 1 1 0 0 0 0 50000 > gcc_hmss_at_clk 0 0 0 0 0 0 50000 > gcc_gpu_snoc_dvm_gfx_clk 0 0 0 0 0 0 50000 > gcc_gpu_cfg_ahb_clk 0 0 0 0 0 0 50000 > gcc_gpu_bimc_gfx_src_clk 0 0 0 0 0 0 50000 > gcc_gpu_bimc_gfx_clk 0 0 0 0 0 0 50000 > gcc_blsp2_sleep_clk 0 0 0 0 0 0 50000 > gcc_blsp2_ahb_clk 3 3 0 0 0 0 50000 > gcc_blsp1_sleep_clk 0 0 0 0 0 0 50000 > gcc_blsp1_ahb_clk 0 0 0 0 0 0 50000 > gcc_bimc_mss_q6_axi_clk 0 0 0 0 0 0 50000 > gcc_bimc_hmss_axi_clk 0 0 0 0 0 0 50000 > gcc_apss_qdss_tsctr_div8_clk 0 0 0 0 0 0 50000 > gcc_apss_qdss_tsctr_div2_clk 0 0 0 0 0 0 50000 > gcc_aggre1_noc_xo_clk 0 0 0 0 0 0 50000 > sleep_clk 0 0 0 32764 0 0 50000 > xo 1 1 0 19200000 0 0 50000 > gcc_rx1_usb2_clkref_clk 0 0 0 19200000 0 0 50000 > gcc_pcie_clkref_clk 0 0 0 19200000 0 0 50000 > gcc_ufs_clkref_clk 0 0 0 19200000 0 0 50000 > gcc_hdmi_clkref_clk 0 0 0 19200000 0 0 50000 > gcc_usb3_clkref_clk 0 0 0 19200000 0 0 50000 > usb3_phy_aux_clk_src 0 0 0 1200000 0 0 50000 > gcc_usb3_phy_aux_clk 0 0 0 1200000 0 0 50000 > usb30_mock_utmi_clk_src 0 0 0 19200000 0 0 50000 > gcc_usb30_mock_utmi_clk 0 0 0 19200000 0 0 50000 > tsif_ref_clk_src 0 0 0 19200000 0 0 50000 > gcc_tsif_ref_clk 0 0 0 19200000 0 0 50000 > sdcc4_apps_clk_src 0 0 0 19200000 0 0 50000 > gcc_sdcc4_apps_clk 0 0 0 19200000 0 0 50000 > sdcc2_apps_clk_src 0 0 0 19200000 0 0 50000 > gcc_sdcc2_apps_clk 0 0 0 19200000 0 0 50000 > pdm2_clk_src 0 0 0 19200000 0 0 50000 > gcc_pdm2_clk 0 0 0 19200000 0 0 50000 > pcie_aux_clk_src 0 0 0 19200000 0 0 50000 > gcc_pcie_0_aux_clk 0 0 0 19200000 0 0 50000 > gcc_pcie_phy_aux_clk 0 0 0 19200000 0 0 50000 > hmss_rbcpr_clk_src 0 0 0 19200000 0 0 50000 > gcc_hmss_rbcpr_clk 0 0 0 19200000 0 0 50000 > hmss_ahb_clk_src 0 0 0 19200000 0 0 50000 > gcc_hmss_ahb_clk 0 0 0 19200000 0 0 50000 > gpll4 0 0 0 384000000 0 0 50000 > gpll4_out_test 0 0 0 384000000 0 0 50000 > gpll4_out_odd 0 0 0 384000000 0 0 50000 > gpll4_out_main 0 0 0 384000000 0 0 50000 > gpll4_out_even 0 0 0 384000000 0 0 50000 > gpll3 0 0 0 921600000 0 0 50000 > gpll3_out_test 0 0 0 921600000 0 0 50000 > gpll3_out_odd 0 0 0 921600000 0 0 50000 > gpll3_out_main 0 0 0 921600000 0 0 50000 > gpll3_out_even 0 0 0 921600000 0 0 50000 > gpll2 0 0 0 1286400000 0 0 50000 > gpll2_out_test 0 0 0 1286400000 0 0 50000 > gpll2_out_odd 0 0 0 1286400000 0 0 50000 > gpll2_out_main 0 0 0 1286400000 0 0 50000 > gpll2_out_even 0 0 0 1286400000 0 0 50000 > gpll1 0 0 0 1056000000 0 0 50000 > gpll1_out_test 0 0 0 1056000000 0 0 50000 > gpll1_out_odd 0 0 0 1056000000 0 0 50000 > gpll1_out_main 0 0 0 1056000000 0 0 50000 > gpll1_out_even 0 0 0 1056000000 0 0 50000 > gpll0 0 0 0 595200000 0 0 50000 > gpll0_out_test 0 0 0 595200000 0 0 50000 > gpll0_out_odd 0 0 0 595200000 0 0 50000 > gpll0_out_main 0 0 0 595200000 0 0 50000 > usb30_master_clk_src 0 0 0 119040000 0 0 50000 > gcc_aggre1_usb3_axi_clk 0 0 0 119040000 0 0 50000 > gcc_cfg_noc_usb3_axi_clk 0 0 0 119040000 0 0 50000 > gcc_usb30_master_clk 0 0 0 119040000 0 0 50000 > ufs_axi_clk_src 0 0 0 198400000 0 0 50000 > gcc_aggre1_ufs_axi_clk 0 0 0 198400000 0 0 50000 > gcc_ufs_axi_clk 0 0 0 198400000 0 0 50000 > gpll0_out_even 0 0 0 595200000 0 0 50000 > gp3_clk_src 0 0 0 19200000 0 0 50000 > gcc_gp3_clk 0 0 0 19200000 0 0 50000 > gp2_clk_src 0 0 0 19200000 0 0 50000 > gcc_gp2_clk 0 0 0 19200000 0 0 50000 > gp1_clk_src 0 0 0 19200000 0 0 50000 > gcc_gp1_clk 0 0 0 19200000 0 0 50000 > blsp2_uart3_apps_clk_src 0 0 0 19200000 0 0 50000 > gcc_blsp2_uart3_apps_clk 0 0 0 19200000 0 0 50000 > blsp2_uart2_apps_clk_src 1 1 0 1843200 0 0 50000 > gcc_blsp2_uart2_apps_clk 3 3 0 1843200 0 0 50000 > blsp2_uart1_apps_clk_src 0 0 0 19200000 0 0 50000 > gcc_blsp2_uart1_apps_clk 0 0 0 19200000 0 0 50000 > blsp2_qup6_spi_apps_clk_src 0 0 0 19200000 0 0 50000 > gcc_blsp2_qup6_spi_apps_clk 0 0 0 19200000 0 0 50000 > blsp2_qup6_i2c_apps_clk_src 0 0 0 19200000 0 0 50000 > gcc_blsp2_qup6_i2c_apps_clk 0 0 0 19200000 0 0 50000 > blsp2_qup5_spi_apps_clk_src 0 0 0 19200000 0 0 50000 > gcc_blsp2_qup5_spi_apps_clk 0 0 0 19200000 0 0 50000 > blsp2_qup5_i2c_apps_clk_src 0 0 0 19200000 0 0 50000 > gcc_blsp2_qup5_i2c_apps_clk 0 0 0 19200000 0 0 50000 > blsp2_qup4_spi_apps_clk_src 0 0 0 19200000 0 0 50000 > gcc_blsp2_qup4_spi_apps_clk 0 0 0 19200000 0 0 50000 > blsp2_qup4_i2c_apps_clk_src 0 0 0 19200000 0 0 50000 > gcc_blsp2_qup4_i2c_apps_clk 0 0 0 19200000 0 0 50000 > blsp2_qup3_spi_apps_clk_src 0 0 0 19200000 0 0 50000 > gcc_blsp2_qup3_spi_apps_clk 0 0 0 19200000 0 0 50000 > blsp2_qup3_i2c_apps_clk_src 0 0 0 19200000 0 0 50000 > gcc_blsp2_qup3_i2c_apps_clk 0 0 0 19200000 0 0 50000 > blsp2_qup2_spi_apps_clk_src 0 0 0 19200000 0 0 50000 > gcc_blsp2_qup2_spi_apps_clk 0 0 0 19200000 0 0 50000 > blsp2_qup2_i2c_apps_clk_src 0 0 0 19200000 0 0 50000 > gcc_blsp2_qup2_i2c_apps_clk 0 0 0 19200000 0 0 50000 > blsp2_qup1_spi_apps_clk_src 0 0 0 19200000 0 0 50000 > gcc_blsp2_qup1_spi_apps_clk 0 0 0 19200000 0 0 50000 > blsp2_qup1_i2c_apps_clk_src 0 0 0 19200000 0 0 50000 > gcc_blsp2_qup1_i2c_apps_clk 0 0 0 19200000 0 0 50000 > blsp1_uart3_apps_clk_src 0 0 0 19200000 0 0 50000 > gcc_blsp1_uart3_apps_clk 0 0 0 19200000 0 0 50000 > blsp1_uart2_apps_clk_src 0 0 0 19200000 0 0 50000 > gcc_blsp1_uart2_apps_clk 0 0 0 19200000 0 0 50000 > blsp1_uart1_apps_clk_src 0 0 0 19200000 0 0 50000 > gcc_blsp1_uart1_apps_clk 0 0 0 19200000 0 0 50000 > blsp1_qup6_spi_apps_clk_src 0 0 0 19200000 0 0 50000 > gcc_blsp1_qup6_spi_apps_clk 0 0 0 19200000 0 0 50000 > blsp1_qup6_i2c_apps_clk_src 0 0 0 19200000 0 0 50000 > gcc_blsp1_qup6_i2c_apps_clk 0 0 0 19200000 0 0 50000 > blsp1_qup5_spi_apps_clk_src 0 0 0 19200000 0 0 50000 > gcc_blsp1_qup5_spi_apps_clk 0 0 0 19200000 0 0 50000 > blsp1_qup5_i2c_apps_clk_src 0 0 0 19200000 0 0 50000 > gcc_blsp1_qup5_i2c_apps_clk 0 0 0 19200000 0 0 50000 > blsp1_qup4_spi_apps_clk_src 0 0 0 19200000 0 0 50000 > gcc_blsp1_qup4_spi_apps_clk 0 0 0 19200000 0 0 50000 > blsp1_qup4_i2c_apps_clk_src 0 0 0 19200000 0 0 50000 > gcc_blsp1_qup4_i2c_apps_clk 0 0 0 19200000 0 0 50000 > blsp1_qup3_spi_apps_clk_src 0 0 0 19200000 0 0 50000 > gcc_blsp1_qup3_spi_apps_clk 0 0 0 19200000 0 0 50000 > blsp1_qup3_i2c_apps_clk_src 0 0 0 19200000 0 0 50000 > gcc_blsp1_qup3_i2c_apps_clk 0 0 0 19200000 0 0 50000 > blsp1_qup2_spi_apps_clk_src 0 0 0 19200000 0 0 50000 > gcc_blsp1_qup2_spi_apps_clk 0 0 0 19200000 0 0 50000 > blsp1_qup2_i2c_apps_clk_src 0 0 0 19200000 0 0 50000 > gcc_blsp1_qup2_i2c_apps_clk 0 0 0 19200000 0 0 50000 > blsp1_qup1_spi_apps_clk_src 0 0 0 19200000 0 0 50000 > gcc_blsp1_qup1_spi_apps_clk 0 0 0 19200000 0 0 50000 > blsp1_qup1_i2c_apps_clk_src 0 0 0 19200000 0 0 50000 > gcc_blsp1_qup1_i2c_apps_clk 0 0 0 19200000 0 0 50000 > ln_bb_a_clk1 0 0 0 0 0 0 50000 > ln_bb_clk1 0 0 0 0 0 0 50000 > > > There is no clock summary in 4.4 to compare the downstream kernel? Not that I've seen. You can check each clock individually, but I realize that is tedious.
On 12/4/2018 10:21 AM, Jeffrey Hugo wrote: > On 12/4/2018 10:11 AM, Marc Gonzalez wrote: >> On 04/12/2018 18:05, Jeffrey Hugo wrote: >> >>> mount -t debugfs none /sys/kernel/debug >> >> Doh! >> >> # cat /sys/kernel/debug/clk/clk_summary >> enable prepare >> protect duty >> clock count count count >> rate accuracy phase cycle >> --------------------------------------------------------------------------------------------- >> >> gcc_usb_phy_cfg_ahb2phy_clk 0 0 0 >> 0 0 0 50000 >> gcc_usb3_phy_pipe_clk 0 0 0 >> 0 0 0 50000 >> gcc_usb30_sleep_clk 0 0 0 >> 0 0 0 50000 >> gcc_ufs_unipro_core_clk 0 0 0 >> 0 0 0 50000 > > Yeah, this clock has no parent, and is one of the ones that is a delta > from the downsteam per your logs. From what I can tell from the documentation, this is sourced from ufs_unipro_core_clk_src, which is inturn sourced from gpll0_out_main. I'm guessing gcc-msm8998.c needs to be updated to reflect this. It would also be good to check this against the downstream kernel. Let me know if you want me to have a look at any other specific clocks.
On 04/12/2018 18:31, Jeffrey Hugo wrote: > From what I can tell from the documentation, this is sourced from > ufs_unipro_core_clk_src, which is inturn sourced from gpll0_out_main. > I'm guessing gcc-msm8998.c needs to be updated to reflect this. It > would also be good to check this against the downstream kernel. With Stephen's "define xo clock" patch applied: # cat clk_summary enable prepare protect duty clock count count count rate accuracy phase cycle --------------------------------------------------------------------------------------------- gcc_usb_phy_cfg_ahb2phy_clk 0 0 0 0 0 0 50000 gcc_usb3_phy_pipe_clk 0 0 0 0 0 0 50000 gcc_usb30_sleep_clk 0 0 0 0 0 0 50000 gcc_ufs_tx_symbol_0_clk 0 0 0 0 0 0 50000 gcc_ufs_rx_symbol_1_clk 0 0 0 0 0 0 50000 gcc_ufs_rx_symbol_0_clk 0 0 0 0 0 0 50000 gcc_ufs_phy_aux_clk 0 0 0 0 0 0 50000 gcc_ufs_ice_core_clk 0 0 0 0 0 0 50000 gcc_ufs_ahb_clk 0 0 0 0 0 0 50000 gcc_tsif_inactivity_timers_clk 0 0 0 0 0 0 50000 gcc_tsif_ahb_clk 0 0 0 0 0 0 50000 gcc_sdcc4_ahb_clk 0 0 0 0 0 0 50000 gcc_sdcc2_ahb_clk 0 0 0 0 0 0 50000 gcc_prng_ahb_clk 0 0 0 0 0 0 50000 gcc_pdm_xo4_clk 0 0 0 0 0 0 50000 gcc_pdm_ahb_clk 0 0 0 0 0 0 50000 gcc_pcie_0_slv_axi_clk 0 0 0 0 0 0 50000 gcc_pcie_0_pipe_clk 0 0 0 0 0 0 50000 gcc_pcie_0_mstr_axi_clk 0 0 0 0 0 0 50000 gcc_pcie_0_cfg_ahb_clk 0 0 0 0 0 0 50000 gcc_mss_at_clk 0 0 0 0 0 0 50000 gcc_mmss_sys_noc_axi_clk 0 0 0 0 0 0 50000 gcc_mmss_qm_core_clk 0 0 0 0 0 0 50000 gcc_mmss_qm_ahb_clk 0 0 0 0 0 0 50000 gcc_mmss_noc_cfg_ahb_clk 0 0 0 0 0 0 50000 gcc_lpass_trig_clk 0 0 0 0 0 0 50000 gcc_lpass_at_clk 1 1 0 0 0 0 50000 gcc_hmss_trig_clk 0 0 0 0 0 0 50000 gcc_hmss_dvm_bus_clk 1 1 0 0 0 0 50000 gcc_hmss_at_clk 0 0 0 0 0 0 50000 gcc_gpu_snoc_dvm_gfx_clk 0 0 0 0 0 0 50000 gcc_gpu_cfg_ahb_clk 0 0 0 0 0 0 50000 gcc_gpu_bimc_gfx_src_clk 0 0 0 0 0 0 50000 gcc_gpu_bimc_gfx_clk 0 0 0 0 0 0 50000 gcc_blsp2_sleep_clk 0 0 0 0 0 0 50000 gcc_blsp2_ahb_clk 3 3 0 0 0 0 50000 gcc_blsp1_sleep_clk 0 0 0 0 0 0 50000 gcc_blsp1_ahb_clk 0 0 0 0 0 0 50000 gcc_bimc_mss_q6_axi_clk 0 0 0 0 0 0 50000 gcc_bimc_hmss_axi_clk 0 0 0 0 0 0 50000 gcc_apss_qdss_tsctr_div8_clk 0 0 0 0 0 0 50000 gcc_apss_qdss_tsctr_div2_clk 0 0 0 0 0 0 50000 gcc_aggre1_noc_xo_clk 0 0 0 0 0 0 50000 sleep_clk 0 0 0 32764 0 0 50000 xo_board 1 1 0 19200000 0 0 50000 ln_bb_a_clk1 0 0 0 19200000 0 0 50000 ln_bb_clk1 0 0 0 19200000 0 0 50000 xo 1 1 0 19200000 0 0 50000 gcc_rx1_usb2_clkref_clk 0 0 0 19200000 0 0 50000 gcc_pcie_clkref_clk 0 0 0 19200000 0 0 50000 gcc_ufs_clkref_clk 0 0 0 19200000 0 0 50000 gcc_hdmi_clkref_clk 0 0 0 19200000 0 0 50000 gcc_usb3_clkref_clk 0 0 0 19200000 0 0 50000 usb3_phy_aux_clk_src 0 0 0 1200000 0 0 50000 gcc_usb3_phy_aux_clk 0 0 0 1200000 0 0 50000 usb30_mock_utmi_clk_src 0 0 0 19200000 0 0 50000 gcc_usb30_mock_utmi_clk 0 0 0 19200000 0 0 50000 tsif_ref_clk_src 0 0 0 19200000 0 0 50000 gcc_tsif_ref_clk 0 0 0 19200000 0 0 50000 sdcc4_apps_clk_src 0 0 0 19200000 0 0 50000 gcc_sdcc4_apps_clk 0 0 0 19200000 0 0 50000 sdcc2_apps_clk_src 0 0 0 19200000 0 0 50000 gcc_sdcc2_apps_clk 0 0 0 19200000 0 0 50000 pdm2_clk_src 0 0 0 19200000 0 0 50000 gcc_pdm2_clk 0 0 0 19200000 0 0 50000 pcie_aux_clk_src 0 0 0 19200000 0 0 50000 gcc_pcie_0_aux_clk 0 0 0 19200000 0 0 50000 gcc_pcie_phy_aux_clk 0 0 0 19200000 0 0 50000 hmss_rbcpr_clk_src 0 0 0 19200000 0 0 50000 gcc_hmss_rbcpr_clk 0 0 0 19200000 0 0 50000 hmss_ahb_clk_src 0 0 0 19200000 0 0 50000 gcc_hmss_ahb_clk 0 0 0 19200000 0 0 50000 gpll4 0 0 0 384000000 0 0 50000 gpll4_out_test 0 0 0 384000000 0 0 50000 gpll4_out_odd 0 0 0 384000000 0 0 50000 gpll4_out_main 0 0 0 384000000 0 0 50000 gpll4_out_even 0 0 0 384000000 0 0 50000 gpll3 0 0 0 921600000 0 0 50000 gpll3_out_test 0 0 0 921600000 0 0 50000 gpll3_out_odd 0 0 0 921600000 0 0 50000 gpll3_out_main 0 0 0 921600000 0 0 50000 gpll3_out_even 0 0 0 921600000 0 0 50000 gpll2 0 0 0 1286400000 0 0 50000 gpll2_out_test 0 0 0 1286400000 0 0 50000 gpll2_out_odd 0 0 0 1286400000 0 0 50000 gpll2_out_main 0 0 0 1286400000 0 0 50000 gpll2_out_even 0 0 0 1286400000 0 0 50000 gpll1 0 0 0 1056000000 0 0 50000 gpll1_out_test 0 0 0 1056000000 0 0 50000 gpll1_out_odd 0 0 0 1056000000 0 0 50000 gpll1_out_main 0 0 0 1056000000 0 0 50000 gpll1_out_even 0 0 0 1056000000 0 0 50000 gpll0 0 0 0 595200000 0 0 50000 gpll0_out_test 0 0 0 595200000 0 0 50000 gpll0_out_odd 0 0 0 595200000 0 0 50000 gpll0_out_main 0 0 0 595200000 0 0 50000 ufs_unipro_core_clk_src 0 0 0 148800000 0 0 50000 gcc_ufs_unipro_core_clk 0 0 0 148800000 0 0 50000 usb30_master_clk_src 0 0 0 119040000 0 0 50000 gcc_aggre1_usb3_axi_clk 0 0 0 119040000 0 0 50000 gcc_cfg_noc_usb3_axi_clk 0 0 0 119040000 0 0 50000 gcc_usb30_master_clk 0 0 0 119040000 0 0 50000 ufs_axi_clk_src 0 0 0 198400000 0 0 50000 gcc_aggre1_ufs_axi_clk 0 0 0 198400000 0 0 50000 gcc_ufs_axi_clk 0 0 0 198400000 0 0 50000 gpll0_out_even 0 0 0 595200000 0 0 50000 gp3_clk_src 0 0 0 19200000 0 0 50000 gcc_gp3_clk 0 0 0 19200000 0 0 50000 gp2_clk_src 0 0 0 19200000 0 0 50000 gcc_gp2_clk 0 0 0 19200000 0 0 50000 gp1_clk_src 0 0 0 19200000 0 0 50000 gcc_gp1_clk 0 0 0 19200000 0 0 50000 blsp2_uart3_apps_clk_src 0 0 0 19200000 0 0 50000 gcc_blsp2_uart3_apps_clk 0 0 0 19200000 0 0 50000 blsp2_uart2_apps_clk_src 1 1 0 1843200 0 0 50000 gcc_blsp2_uart2_apps_clk 3 3 0 1843200 0 0 50000 blsp2_uart1_apps_clk_src 0 0 0 19200000 0 0 50000 gcc_blsp2_uart1_apps_clk 0 0 0 19200000 0 0 50000 blsp2_qup6_spi_apps_clk_src 0 0 0 19200000 0 0 50000 gcc_blsp2_qup6_spi_apps_clk 0 0 0 19200000 0 0 50000 blsp2_qup6_i2c_apps_clk_src 0 0 0 19200000 0 0 50000 gcc_blsp2_qup6_i2c_apps_clk 0 0 0 19200000 0 0 50000 blsp2_qup5_spi_apps_clk_src 0 0 0 19200000 0 0 50000 gcc_blsp2_qup5_spi_apps_clk 0 0 0 19200000 0 0 50000 blsp2_qup5_i2c_apps_clk_src 0 0 0 19200000 0 0 50000 gcc_blsp2_qup5_i2c_apps_clk 0 0 0 19200000 0 0 50000 blsp2_qup4_spi_apps_clk_src 0 0 0 19200000 0 0 50000 gcc_blsp2_qup4_spi_apps_clk 0 0 0 19200000 0 0 50000 blsp2_qup4_i2c_apps_clk_src 0 0 0 19200000 0 0 50000 gcc_blsp2_qup4_i2c_apps_clk 0 0 0 19200000 0 0 50000 blsp2_qup3_spi_apps_clk_src 0 0 0 19200000 0 0 50000 gcc_blsp2_qup3_spi_apps_clk 0 0 0 19200000 0 0 50000 blsp2_qup3_i2c_apps_clk_src 0 0 0 19200000 0 0 50000 gcc_blsp2_qup3_i2c_apps_clk 0 0 0 19200000 0 0 50000 blsp2_qup2_spi_apps_clk_src 0 0 0 19200000 0 0 50000 gcc_blsp2_qup2_spi_apps_clk 0 0 0 19200000 0 0 50000 blsp2_qup2_i2c_apps_clk_src 0 0 0 19200000 0 0 50000 gcc_blsp2_qup2_i2c_apps_clk 0 0 0 19200000 0 0 50000 blsp2_qup1_spi_apps_clk_src 0 0 0 19200000 0 0 50000 gcc_blsp2_qup1_spi_apps_clk 0 0 0 19200000 0 0 50000 blsp2_qup1_i2c_apps_clk_src 0 0 0 19200000 0 0 50000 gcc_blsp2_qup1_i2c_apps_clk 0 0 0 19200000 0 0 50000 blsp1_uart3_apps_clk_src 0 0 0 19200000 0 0 50000 gcc_blsp1_uart3_apps_clk 0 0 0 19200000 0 0 50000 blsp1_uart2_apps_clk_src 0 0 0 19200000 0 0 50000 gcc_blsp1_uart2_apps_clk 0 0 0 19200000 0 0 50000 blsp1_uart1_apps_clk_src 0 0 0 19200000 0 0 50000 gcc_blsp1_uart1_apps_clk 0 0 0 19200000 0 0 50000 blsp1_qup6_spi_apps_clk_src 0 0 0 19200000 0 0 50000 gcc_blsp1_qup6_spi_apps_clk 0 0 0 19200000 0 0 50000 blsp1_qup6_i2c_apps_clk_src 0 0 0 19200000 0 0 50000 gcc_blsp1_qup6_i2c_apps_clk 0 0 0 19200000 0 0 50000 blsp1_qup5_spi_apps_clk_src 0 0 0 19200000 0 0 50000 gcc_blsp1_qup5_spi_apps_clk 0 0 0 19200000 0 0 50000 blsp1_qup5_i2c_apps_clk_src 0 0 0 19200000 0 0 50000 gcc_blsp1_qup5_i2c_apps_clk 0 0 0 19200000 0 0 50000 blsp1_qup4_spi_apps_clk_src 0 0 0 19200000 0 0 50000 gcc_blsp1_qup4_spi_apps_clk 0 0 0 19200000 0 0 50000 blsp1_qup4_i2c_apps_clk_src 0 0 0 19200000 0 0 50000 gcc_blsp1_qup4_i2c_apps_clk 0 0 0 19200000 0 0 50000 blsp1_qup3_spi_apps_clk_src 0 0 0 19200000 0 0 50000 gcc_blsp1_qup3_spi_apps_clk 0 0 0 19200000 0 0 50000 blsp1_qup3_i2c_apps_clk_src 0 0 0 19200000 0 0 50000 gcc_blsp1_qup3_i2c_apps_clk 0 0 0 19200000 0 0 50000 blsp1_qup2_spi_apps_clk_src 0 0 0 19200000 0 0 50000 gcc_blsp1_qup2_spi_apps_clk 0 0 0 19200000 0 0 50000 blsp1_qup2_i2c_apps_clk_src 0 0 0 19200000 0 0 50000 gcc_blsp1_qup2_i2c_apps_clk 0 0 0 19200000 0 0 50000 blsp1_qup1_spi_apps_clk_src 0 0 0 19200000 0 0 50000 gcc_blsp1_qup1_spi_apps_clk 0 0 0 19200000 0 0 50000 blsp1_qup1_i2c_apps_clk_src 0 0 0 19200000 0 0 50000 gcc_blsp1_qup1_i2c_apps_clk 0 0 0 19200000 0 0 50000 # grep ufs clk_summary gcc_ufs_tx_symbol_0_clk 0 0 0 0 0 0 50000 gcc_ufs_rx_symbol_1_clk 0 0 0 0 0 0 50000 gcc_ufs_rx_symbol_0_clk 0 0 0 0 0 0 50000 gcc_ufs_phy_aux_clk 0 0 0 0 0 0 50000 gcc_ufs_ice_core_clk 0 0 0 0 0 0 50000 gcc_ufs_ahb_clk 0 0 0 0 0 0 50000 gcc_ufs_clkref_clk 0 0 0 19200000 0 0 50000 ufs_unipro_core_clk_src 0 0 0 148800000 0 0 50000 gcc_ufs_unipro_core_clk 0 0 0 148800000 0 0 50000 ufs_axi_clk_src 0 0 0 198400000 0 0 50000 gcc_aggre1_ufs_axi_clk 0 0 0 198400000 0 0 50000 gcc_ufs_axi_clk 0 0 0 198400000 0 0 50000 I find it surprising that many ufs-related clocks are unparented, have no rate, and have never been enabled. But that's probably a red-herring. As Bjorn mentioned, the bootloader probably leaves all the UFS clocks in the correct state, so the problem must be elsewhere... Will check the init sequence. Just for completeness sake, here are the clock parents downstream: CLOCK=gcc_ufs_ahb_clk PARENT=None CLOCK=gcc_ufs_clkref_clk PARENT=None CLOCK=gcc_ufs_rx_symbol_0_clk PARENT=None CLOCK=gcc_ufs_rx_symbol_1_clk PARENT=None CLOCK=gcc_ufs_tx_symbol_0_clk PARENT=None CLOCK=gcc_aggre1_ufs_axi_clk PARENT=ufs_axi_clk_src CLOCK=gcc_aggre1_ufs_axi_hw_ctl_clk PARENT=gcc_aggre1_ufs_axi_clk CLOCK=gcc_ufs_axi_clk PARENT=ufs_axi_clk_src CLOCK=gcc_ufs_axi_hw_ctl_clk PARENT=gcc_ufs_axi_clk CLOCK=gcc_ufs_ice_core_clk PARENT=ufs_ice_core_clk_src CLOCK=gcc_ufs_ice_core_hw_ctl_clk PARENT=gcc_ufs_ice_core_clk CLOCK=gcc_ufs_phy_aux_clk PARENT=ufs_phy_aux_clk_src CLOCK=gcc_ufs_phy_aux_hw_ctl_clk PARENT=gcc_ufs_phy_aux_clk CLOCK=gcc_ufs_unipro_core_clk PARENT=ufs_unipro_core_clk_src CLOCK=gcc_ufs_unipro_core_hw_ctl_clk PARENT=gcc_ufs_unipro_core_clk CLOCK=ufs_axi_clk_src PARENT=gpll0_out_main CLOCK=ufs_ice_core_clk_src PARENT=gpll0_out_main CLOCK=ufs_phy_aux_clk_src PARENT=cxo_clk_src CLOCK=ufs_unipro_core_clk_src PARENT=gpll0_out_main Regards.
On Thu, Dec 6, 2018 at 8:18 AM Marc Gonzalez <marc.w.gonzalez@free.fr> wrote: > > On 04/12/2018 18:31, Jeffrey Hugo wrote: > I'll throw my random thought into the hopper here. With one particular brand of UFS part on SDM845 we needed to make sure we banged on the ufs_reset pin before the device would re-initialize fully. My hunch says this is not your issue, but it can't hurt to make sure this is happening. -Evan
On 06/12/2018 17:45, Evan Green wrote: > I'll throw my random thought into the hopper here. With one particular > brand of UFS part on SDM845 we needed to make sure we banged on the > ufs_reset pin before the device would re-initialize fully. My hunch > says this is not your issue, but it can't hurt to make sure this is > happening. First of all, thanks for chiming in. I feel I'm close to making this work. My UFSHC DT node defines: resets = <&gcc GCC_UFS_BCR>; reset-names = "rst"; If I'm not mistaken, the uhfhc driver should tickle the reset register? Is the ufs_reset pin something different? Regards.
On 07/12/2018 09:57, Marc Gonzalez wrote: > On 06/12/2018 17:45, Evan Green wrote: > >> I'll throw my random thought into the hopper here. With one particular >> brand of UFS part on SDM845 we needed to make sure we banged on the >> ufs_reset pin before the device would re-initialize fully. My hunch >> says this is not your issue, but it can't hurt to make sure this is >> happening. > > First of all, thanks for chiming in. I feel I'm close to making this work. > > My UFSHC DT node defines: > > resets = <&gcc GCC_UFS_BCR>; > reset-names = "rst"; > > If I'm not mistaken, the uhfhc driver should tickle the reset register? > Is the ufs_reset pin something different? In fact, I based my UFS stuff on your UFS stuff. [PATCH v5 0/5] arm64: dts: qcom: sdm845: Add UFS DT nodes I read the comments in that series, including the fact that the "resets" property is ignored by the ufshc driver. Grepping for ufs_reset downstream, I see: $ git grep -i ufs_reset vendor vendor:arch/arm/boot/dts/qcom/msm8998-pinctrl.dtsi: pins = "ufs_reset"; vendor:arch/arm/boot/dts/qcom/msm8998-pinctrl.dtsi: * UFS_RESET driver strengths are having vendor:arch/arm/boot/dts/qcom/msm8998-pinctrl.dtsi: * HDRV value | UFS_RESET | Typical GPIO vendor:arch/arm/boot/dts/qcom/msm8998-pinctrl.dtsi: * POR value for UFS_RESET HDRV is 3 which means vendor:arch/arm/boot/dts/qcom/msm8998-pinctrl.dtsi: pins = "ufs_reset"; vendor:arch/arm/boot/dts/qcom/msm8998-svr20-pinctrl.dtsi: pins = "ufs_reset"; vendor:arch/arm/boot/dts/qcom/msm8998-svr20-pinctrl.dtsi: * UFS_RESET driver strengths are having vendor:arch/arm/boot/dts/qcom/msm8998-svr20-pinctrl.dtsi: * HDRV value | UFS_RESET | Typical GPIO vendor:arch/arm/boot/dts/qcom/msm8998-svr20-pinctrl.dtsi: * POR value for UFS_RESET HDRV is 3 which means vendor:arch/arm/boot/dts/qcom/msm8998-svr20-pinctrl.dtsi: pins = "ufs_reset"; vendor:drivers/phy/phy-qcom-ufs-qrbtc-v2.c: writel_relaxed(0x15f, qrbtc_phy->u11_regs + U11_UFS_RESET_REG_OFFSET); vendor:drivers/phy/phy-qcom-ufs-qrbtc-v2.c: writel_relaxed(0x0, qrbtc_phy->u11_regs + U11_UFS_RESET_REG_OFFSET); vendor:drivers/phy/phy-qcom-ufs-qrbtc-v2.h:#define U11_UFS_RESET_REG_OFFSET PHY_USR(0x4) vendor:drivers/pinctrl/qcom/pinctrl-msm8998.c:#define UFS_RESET(pg_name, offset) \ vendor:drivers/pinctrl/qcom/pinctrl-msm8998.c: PINCTRL_PIN(153, "UFS_RESET"), vendor:drivers/pinctrl/qcom/pinctrl-msm8998.c:static const unsigned int ufs_reset_pins[] = { 153 }; vendor:drivers/pinctrl/qcom/pinctrl-msm8998.c: UFS_RESET(ufs_reset, 0x19d000), Upstream: $ git grep -i ufs_reset master master:Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.txt: ufs_reset master:Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.txt: ufs_reset master:drivers/pinctrl/qcom/pinctrl-msm8998.c:#define UFS_RESET(pg_name, offset) \ master:drivers/pinctrl/qcom/pinctrl-msm8998.c: PINCTRL_PIN(153, "UFS_RESET"), master:drivers/pinctrl/qcom/pinctrl-msm8998.c:static const unsigned int ufs_reset_pins[] = { 153 }; master:drivers/pinctrl/qcom/pinctrl-msm8998.c: UFS_RESET(ufs_reset, 0x19d000), master:drivers/pinctrl/qcom/pinctrl-qcs404.c:#define UFS_RESET(pg_name, offset) \ master:drivers/pinctrl/qcom/pinctrl-sdm845.c:#define UFS_RESET(pg_name, offset) \ master:drivers/pinctrl/qcom/pinctrl-sdm845.c: PINCTRL_PIN(153, "UFS_RESET"), master:drivers/pinctrl/qcom/pinctrl-sdm845.c:static const unsigned int ufs_reset_pins[] = { 153 }; master:drivers/pinctrl/qcom/pinctrl-sdm845.c: UFS_RESET(ufs_reset, 0x99f000), I need to find the way to make Linux tickle/toggle the ufs_reset pin. Regards.
On 06/12/2018 17:45, Evan Green wrote: > I'll throw my random thought into the hopper here. With one particular > brand of UFS part on SDM845 we needed to make sure we banged on the > ufs_reset pin before the device would re-initialize fully. My hunch > says this is not your issue, but it can't hurt to make sure this is > happening. You might be on to something. Downstream handles the pinctrl nodes, while upstream doesn't. $ git grep pinc vendor -- drivers/scsi/ufs/ vendor:drivers/scsi/ufs/ufshcd-pltfrm.c:static int ufshcd_parse_pinctrl_info(struct ufs_hba *hba) vendor:drivers/scsi/ufs/ufshcd-pltfrm.c: /* Try to obtain pinctrl handle */ vendor:drivers/scsi/ufs/ufshcd-pltfrm.c: hba->pctrl = devm_pinctrl_get(hba->dev); vendor:drivers/scsi/ufs/ufshcd-pltfrm.c: err = ufshcd_parse_pinctrl_info(hba); vendor:drivers/scsi/ufs/ufshcd-pltfrm.c: dev_dbg(&pdev->dev, "%s: unable to parse pinctrl data %d\n", vendor:drivers/scsi/ufs/ufshcd.c: ret = pinctrl_select_state(hba->pctrl, vendor:drivers/scsi/ufs/ufshcd.c: pinctrl_lookup_state(hba->pctrl, "dev-reset-assert")); vendor:drivers/scsi/ufs/ufshcd.c: ret = pinctrl_select_state(hba->pctrl, vendor:drivers/scsi/ufs/ufshcd.c: pinctrl_lookup_state(hba->pctrl, "dev-reset-deassert")); vendor:drivers/scsi/ufs/ufshcd.h: struct pinctrl *pctrl; $ git grep pinc master -- drivers/scsi/ufs/ /* NOTHING */
On Fri, Dec 7, 2018 at 4:10 AM Marc Gonzalez <marc.w.gonzalez@free.fr> wrote: > > On 06/12/2018 17:45, Evan Green wrote: > > > I'll throw my random thought into the hopper here. With one particular > > brand of UFS part on SDM845 we needed to make sure we banged on the > > ufs_reset pin before the device would re-initialize fully. My hunch > > says this is not your issue, but it can't hurt to make sure this is > > happening. > > You might be on to something. > > Downstream handles the pinctrl nodes, while upstream doesn't. > > $ git grep pinc vendor -- drivers/scsi/ufs/ > vendor:drivers/scsi/ufs/ufshcd-pltfrm.c:static int ufshcd_parse_pinctrl_info(struct ufs_hba *hba) > vendor:drivers/scsi/ufs/ufshcd-pltfrm.c: /* Try to obtain pinctrl handle */ > vendor:drivers/scsi/ufs/ufshcd-pltfrm.c: hba->pctrl = devm_pinctrl_get(hba->dev); > vendor:drivers/scsi/ufs/ufshcd-pltfrm.c: err = ufshcd_parse_pinctrl_info(hba); > vendor:drivers/scsi/ufs/ufshcd-pltfrm.c: dev_dbg(&pdev->dev, "%s: unable to parse pinctrl data %d\n", > vendor:drivers/scsi/ufs/ufshcd.c: ret = pinctrl_select_state(hba->pctrl, > vendor:drivers/scsi/ufs/ufshcd.c: pinctrl_lookup_state(hba->pctrl, "dev-reset-assert")); > vendor:drivers/scsi/ufs/ufshcd.c: ret = pinctrl_select_state(hba->pctrl, > vendor:drivers/scsi/ufs/ufshcd.c: pinctrl_lookup_state(hba->pctrl, "dev-reset-deassert")); > vendor:drivers/scsi/ufs/ufshcd.h: struct pinctrl *pctrl; > > $ git grep pinc master -- drivers/scsi/ufs/ > /* NOTHING */ We did this by abusing the "init" pinctrl state, which I think gets handled automagically. In our board file we have something like this (forgive the paste butchering): &ufshc1 { status = "okay"; pinctrl-names = "init", "default"; pinctrl-0 = <&ufs_dev_reset_assert>; pinctrl-1 = <&ufs_dev_reset_deassert>; vcc-supply = <&src_pp2950_l20a>; vcc-max-microamp = <600000>; }; &tlmm { ufs_dev_reset_assert: ufs_dev_reset_assert { config { pins = "ufs_reset"; bias-pull-down; /* default: pull down */ drive-strength = <8>; /* default: 3.1 mA */ output-low; /* active low reset */ }; }; ufs_dev_reset_deassert: ufs_dev_reset_deassert { config { pins = "ufs_reset"; bias-pull-down; /* default: pull down */ drive-strength = <8>; output-high; /* active low reset */ }; }; };
On 03/12/2018 16:18, Marc Gonzalez wrote: > I'm trying to enable UFS on apq8098. Just wanted to share my progress > so far, in case someone spots any glaring mistakes. I feel I'm close, but I'm still missing something. Full boot log and complete diff provided below, for reference. I'm open to suggestions :-) (Maybe I went overboard with the defconfig changes, I'll try reverting to the default one.) [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x51af8014] [ 0.000000] Linux version 4.20.0-rc4 (mgonzalez@venus) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05)) #21 SMP PREEMPT Wed Dec 12 17:58:29 CET 2018 [ 0.000000] Machine model: Qualcomm Technologies, Inc. MSM8998 v1 MTP [ 0.000000] printk: debug: ignoring loglevel setting. [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 32 MiB at 0x00000000fe000000 [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x000000017e3bffff] [ 0.000000] NUMA: NODE_DATA [mem 0x17e395840-0x17e396fff] [ 0.000000] Zone ranges: [ 0.000000] DMA32 [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000017e3bffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000857fffff] [ 0.000000] node 0: [mem 0x0000000088800000-0x00000000a1dfffff] [ 0.000000] node 0: [mem 0x00000000a2000000-0x000000017e3bffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000017e3bffff] [ 0.000000] On node 0 totalpages: 1028544 [ 0.000000] DMA32 zone: 8192 pages used for memmap [ 0.000000] DMA32 zone: 0 pages reserved [ 0.000000] DMA32 zone: 511488 pages, LIFO batch:63 [ 0.000000] Normal zone: 8079 pages used for memmap [ 0.000000] Normal zone: 517056 pages, LIFO batch:63 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.0 [ 0.000000] random: get_random_bytes called from start_kernel+0xac/0x408 with crng_init=0 [ 0.000000] percpu: Embedded 22 pages/cpu @(____ptrval____) s50456 r8192 d31464 u90112 [ 0.000000] pcpu-alloc: s50456 r8192 d31464 u90112 alloc=22*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1012273 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: console=ttyMSM0,115200,n8 ignore_loglevel androidboot.bootdevice=1da4000.ufshc androidboot.serialno=53733c35 androidboot.baseband=apq mdss_mdp.panel=1:hdmi:16 [ 0.000000] software IO TLB: mapped [mem 0xf9fff000-0xfdfff000] (64MB) [ 0.000000] Memory: 3930600K/4114176K available (6076K kernel code, 666K rwdata, 2540K rodata, 8320K init, 295K bss, 150808K reserved, 32768K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] GICv3: no VLPI support, no direct LPI support [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000017b00000 [ 0.000000] ITS: No ITS available, not enabling LPIs [ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000002] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000092] Console: colour dummy device 80x25 [ 0.000138] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) [ 0.000146] pid_max: default: 32768 minimum: 301 [ 0.000202] LSM: Security Framework initializing [ 0.001077] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.001507] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.001538] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.001562] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.023898] ASID allocator initialised with 32768 entries [ 0.031898] rcu: Hierarchical SRCU implementation. [ 0.040058] EFI services will not be available. [ 0.047921] smp: Bringing up secondary CPUs ... [ 0.082052] Detected VIPT I-cache on CPU1 [ 0.082080] GICv3: CPU1: found redistributor 1 region 0:0x0000000017b20000 [ 0.082124] CPU1: Booted secondary processor 0x0000000001 [0x51af8014] [ 0.114143] Detected VIPT I-cache on CPU2 [ 0.114164] GICv3: CPU2: found redistributor 2 region 0:0x0000000017b40000 [ 0.114204] CPU2: Booted secondary processor 0x0000000002 [0x51af8014] [ 0.146436] Detected VIPT I-cache on CPU3 [ 0.146460] GICv3: CPU3: found redistributor 3 region 0:0x0000000017b60000 [ 0.146498] CPU3: Booted secondary processor 0x0000000003 [0x51af8014] [ 0.179024] Detected VIPT I-cache on CPU4 [ 0.179051] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU4: 0x00000000101122 [ 0.179074] CPU features: Unsupported CPU feature variation detected. [ 0.179107] GICv3: CPU4: found redistributor 100 region 0:0x0000000017b80000 [ 0.179178] CPU4: Booted secondary processor 0x0000000100 [0x51af8001] [ 0.211120] Detected VIPT I-cache on CPU5 [ 0.211144] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU5: 0x00000000101122 [ 0.211196] GICv3: CPU5: found redistributor 101 region 0:0x0000000017ba0000 [ 0.211264] CPU5: Booted secondary processor 0x0000000101 [0x51af8001] [ 0.243449] Detected VIPT I-cache on CPU6 [ 0.243473] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU6: 0x00000000101122 [ 0.243526] GICv3: CPU6: found redistributor 102 region 0:0x0000000017bc0000 [ 0.243594] CPU6: Booted secondary processor 0x0000000102 [0x51af8001] [ 0.275776] Detected VIPT I-cache on CPU7 [ 0.275801] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU7: 0x00000000101122 [ 0.275857] GICv3: CPU7: found redistributor 103 region 0:0x0000000017be0000 [ 0.275925] CPU7: Booted secondary processor 0x0000000103 [0x51af8001] [ 0.276077] smp: Brought up 1 node, 8 CPUs [ 0.276122] SMP: Total of 8 processors activated. [ 0.276127] CPU features: detected: GIC system register CPU interface [ 0.276132] CPU features: detected: 32-bit EL0 Support [ 0.276137] CPU features: detected: CRC32 instructions [ 0.281429] CPU: All CPU(s) started at EL1 [ 0.281470] alternatives: patching kernel code [ 0.282439] devtmpfs: initialized [ 0.284896] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.284927] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.285779] pinctrl core: initialized pinctrl subsystem [ 0.286377] DMI not present or invalid. [ 0.287218] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____)) [ 0.287224] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.288088] DMA: preallocated 256 KiB pool for atomic allocations [ 0.288299] Serial: AMBA PL011 UART driver [ 0.305646] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.306104] cryptd: max_cpu_qlen set to 1000 [ 0.307280] vgaarb: loaded [ 0.307461] SCSI subsystem initialized [ 0.307576] pps_core: LinuxPPS API ver. 1 registered [ 0.307581] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.307660] EDAC MC: Ver: 3.0.0 [ 0.308606] clocksource: Switched to clocksource arch_sys_counter [ 0.308704] VFS: Disk quotas dquot_6.6.0 [ 0.308738] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.313884] PCI: CLS 0 bytes, default 64 [ 0.317814] s1: supplied by vph_pwr [ 0.318299] s2: supplied by vph_pwr [ 0.318548] s3: supplied by vph_pwr [ 0.318613] s3: Bringing 0uV into 1352000-1352000uV [ 0.319113] s4: supplied by vph_pwr [ 0.319172] s4: Bringing 0uV into 1800000-1800000uV [ 0.319463] s5: supplied by vph_pwr [ 0.319511] s5: Bringing 0uV into 1904000-1904000uV [ 0.319827] s6: supplied by vph_pwr [ 0.320150] s7: supplied by vph_pwr [ 0.320198] s7: Bringing 0uV into 900000-900000uV [ 0.320426] s8: supplied by vph_pwr [ 0.320690] s9: supplied by vph_pwr [ 0.320912] s10: supplied by vph_pwr [ 0.321197] s11: supplied by vph_pwr [ 0.321401] s12: supplied by vph_pwr [ 0.321611] s13: supplied by vph_pwr [ 0.321931] l1: supplied by s7 [ 0.321985] l1: Bringing 0uV into 880000-880000uV [ 0.322228] l2: supplied by s3 [ 0.322277] l2: Bringing 0uV into 1200000-1200000uV [ 0.322516] l3: supplied by s7 [ 0.322652] l3: Bringing 0uV into 1000000-1000000uV [ 0.322922] l4: supplied by s7 [ 0.323107] l5: supplied by s7 [ 0.323161] l5: Bringing 0uV into 800000-800000uV [ 0.323440] l6: supplied by s5 [ 0.323591] l6: Bringing 0uV into 1808000-1808000uV [ 0.323884] l7: supplied by s5 [ 0.323931] l7: Bringing 0uV into 1800000-1800000uV [ 0.324210] l8: supplied by s3 [ 0.324254] l8: Bringing 0uV into 1200000-1200000uV [ 0.324514] l9: Bringing 0uV into 1808000-1808000uV [ 0.324897] l10: Bringing 0uV into 1808000-1808000uV [ 0.325302] l11: supplied by s7 [ 0.325360] l11: Bringing 0uV into 1000000-1000000uV [ 0.325640] l12: supplied by s5 [ 0.325709] l12: Bringing 0uV into 1800000-1800000uV [ 0.325982] l13: Bringing 0uV into 1808000-1808000uV [ 0.326310] l14: supplied by s5 [ 0.326449] l14: Bringing 0uV into 1880000-1880000uV [ 0.326738] l15: supplied by s5 [ 0.326792] l15: Bringing 0uV into 1800000-1800000uV [ 0.327078] l16: Bringing 0uV into 2704000-2704000uV [ 0.327375] l17: supplied by s3 [ 0.327447] l17: Bringing 0uV into 1304000-1304000uV [ 0.327858] l18: Bringing 0uV into 2704000-2704000uV [ 0.328191] l19: Bringing 0uV into 3008000-3008000uV [ 0.328497] l20: Bringing 0uV into 2960000-2960000uV [ 0.328934] l21: Bringing 0uV into 2960000-2960000uV [ 0.329293] l22: Bringing 0uV into 2864000-2864000uV [ 0.329638] l23: Bringing 0uV into 3312000-3312000uV [ 0.329989] l24: Bringing 0uV into 3088000-3088000uV [ 0.330502] l25: Bringing 0uV into 3104000-3104000uV [ 0.330949] l26: supplied by s3 [ 0.331004] l26: Bringing 0uV into 1200000-1200000uV [ 0.331404] l27: supplied by s7 [ 0.331748] l28: Bringing 0uV into 3008000-3008000uV [ 0.332157] lvs1: supplied by s4 [ 0.333678] lvs2: supplied by s4 [ 0.334967] bob: supplied by vph_pwr [ 0.335041] bob: Bringing 0uV into 3312000-3312000uV [ 0.856203] Initialise system trusted keyrings [ 0.856623] workingset: timestamp_bits=44 max_order=20 bucket_order=0 [ 0.950470] Key type asymmetric registered [ 0.950527] Asymmetric key parser 'x509' registered [ 0.950838] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.950865] io scheduler noop registered [ 0.950874] io scheduler deadline registered [ 0.951442] io scheduler cfq registered (default) [ 0.951457] io scheduler mq-deadline registered [ 0.951465] io scheduler kyber registered [ 0.954299] qcom-qmp-phy 1da7000.phy: Linked as a consumer to regulator.15 [ 0.954431] qcom-qmp-phy 1da7000.phy: Linked as a consumer to regulator.16 [ 0.955131] qcom-qmp-phy 1da7000.phy: Registered Qcom-QMP phy [ 0.966031] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.968531] msm_serial c1b0000.serial: msm_serial: detected port #0 [ 0.968642] msm_serial c1b0000.serial: uartclk = 1843200 [ 0.968802] c1b0000.serial: ttyMSM0 at MMIO 0xc1b0000 (irq = 13, base_baud = 115200) is a MSM [ 0.968922] msm_serial: console setup on port #0 [ 2.051671] printk: console [ttyMSM0] enabled [ 2.056705] msm_serial: driver initialized [ 2.080393] loop: module loaded [ 2.083564] ufshcd-qcom 1da4000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled [ 2.083793] MYDEBUG: ufshcd_parse_pinctrl_info=0 [ 2.093295] ufshcd_init_clocks: core_clk max=200000000 [ 2.098008] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: core_clk, rate: 198400000 [ 2.102953] ufshcd_init_clocks: bus_aggr_clk max=0 [ 2.111164] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: bus_aggr_clk, rate: 198400000 [ 2.115881] ufshcd_init_clocks: iface_clk max=0 [ 2.124443] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: iface_clk, rate: 0 [ 2.128812] ufshcd_init_clocks: core_clk_unipro max=150000000 [ 2.136439] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: core_clk_unipro, rate: 148800000 [ 2.142280] ufshcd_init_clocks: core_clk_ice max=300000000 [ 2.151106] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: core_clk_ice, rate: 0 [ 2.156425] ufshcd_init_clocks: ref_clk max=0 [ 2.164288] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: ref_clk, rate: 19200000 [ 2.168661] ufshcd_init_clocks: tx_lane0_sync_clk max=0 [ 2.176449] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: tx_lane0_sync_clk, rate: 0 [ 2.181691] ufshcd_init_clocks: rx_lane0_sync_clk max=0 [ 2.189988] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: rx_lane0_sync_clk, rate: 0 [ 2.195135] ufshcd_init_clocks: rx_lane1_sync_clk max=0 [ 2.203443] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: rx_lane1_sync_clk, rate: 0 [ 2.208761] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: core_clk enabled [ 2.216923] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: bus_aggr_clk enabled [ 2.224471] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: iface_clk enabled [ 2.232457] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: core_clk_unipro enabled [ 2.240441] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: core_clk_ice enabled [ 2.248840] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: ref_clk enabled [ 2.256426] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: tx_lane0_sync_clk enabled [ 2.264064] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: rx_lane0_sync_clk enabled [ 2.272654] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: rx_lane1_sync_clk enabled [ 2.281262] l20: supplied by bob [ 2.289650] ufshcd-qcom 1da4000.ufshc: Linked as a consumer to regulator.34 [ 2.292778] ufshcd-qcom 1da4000.ufshc: Linked as a consumer to regulator.40 [ 2.299441] ufshcd-qcom 1da4000.ufshc: Linked as a consumer to regulator.5 [ 2.309977] scsi host0: ufshcd [ 2.314021] MYDEBUG: ufshcd_assert_device_reset [ 2.316332] MYDEBUG: ufshcd_deassert_device_reset [ 2.334733] spmi spmi-0: PMIC arbiter version v3 (0x30000000) [ 2.347478] ufshcd-qcom 1da4000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0 [ 2.347827] VFIO - User Level meta-driver version: 0.3 [ 2.348407] ufshcd_wait_for_dev_cmd: time_left=8 [ 2.359735] i2c /dev entries driver [ 2.364079] ufshcd_wait_for_dev_cmd = 0 [ 2.370940] input: pm8941_pwrkey as /devices/platform/soc/800f000.spmi/spmi-0/0-00/800f000.spmi:pmic@0:pon@800/800f000.spmi:pmic@0:pon@800:pwrkey/input/input0 [ 2.382326] Loading compiled-in X.509 certificates [ 2.418526] l9: supplied by bob [ 2.418737] l10: supplied by bob [ 2.420720] l13: supplied by bob [ 2.424065] l16: supplied by bob [ 2.427305] l18: supplied by bob [ 2.430508] l19: supplied by bob [ 2.433722] l21: supplied by bob [ 2.437023] l22: supplied by bob [ 2.440135] l23: supplied by bob [ 2.443358] l24: supplied by bob [ 2.446563] l25: supplied by bob [ 2.449774] l28: supplied by bob [ 3.872668] ufshcd_wait_for_dev_cmd: time_left=0 [ 3.872757] ufshcd-qcom 1da4000.ufshc: ufshcd_wait_for_dev_cmd: dev_cmd request timedout, tag 31 [ 3.876423] ufshcd_wait_for_dev_cmd = -11 [ 3.885185] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag: Sending flag query for idn 1 failed, err = -11 [ 3.889102] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag_retry: failed with error -11, retries 0 [ 3.964264] ufshcd-qcom 1da4000.ufshc: ufshcd_update_uic_error: UIC error flags = 0x00000000 [ 4.027895] ufshcd-qcom 1da4000.ufshc: ufshcd_update_uic_error: UIC error flags = 0x00000000 [ 4.098358] ufshcd-qcom 1da4000.ufshc: ufshcd_update_uic_error: UIC error flags = 0x00000001 [ 5.408617] ufshcd_wait_for_dev_cmd: time_left=0 [ 5.408666] ufshcd-qcom 1da4000.ufshc: ufshcd_wait_for_dev_cmd: dev_cmd request timedout, tag 31 [ 5.412355] ufshcd_wait_for_dev_cmd = -11 [ 5.421097] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag: Sending flag query for idn 1 failed, err = -11 [ 5.425042] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag_retry: failed with error -11, retries 1 [ 6.944607] ufshcd_wait_for_dev_cmd: time_left=0 [ 6.944657] ufshcd-qcom 1da4000.ufshc: ufshcd_wait_for_dev_cmd: dev_cmd request timedout, tag 31 [ 6.948345] ufshcd_wait_for_dev_cmd = -11 [ 6.957084] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag: Sending flag query for idn 1 failed, err = -11 [ 6.961029] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag_retry: failed with error -11, retries 2 [ 6.970576] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag_retry: query attribute, opcode 6, idn 1, failed with error -11 after 3 retires [ 6.979368] ufshcd-qcom 1da4000.ufshc: ufshcd_complete_dev_init setting fDeviceInit flag failed with error -11 [ 6.992389] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: core_clk disabled [ 7.001331] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: bus_aggr_clk disabled [ 7.009212] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: iface_clk disabled [ 7.017296] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: core_clk_unipro disabled [ 7.025008] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: core_clk_ice disabled [ 7.033312] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: ref_clk disabled [ 7.041501] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: tx_lane0_sync_clk disabled [ 7.048884] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: rx_lane0_sync_clk disabled [ 7.057562] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: rx_lane1_sync_clk disabled [ 7.078107] Freeing unused kernel memory: 8320K [ 7.089357] Run /init as init process [ 7.170002] udevd[1016]: error getting socket: Function not implemented [ 7.170137] udevd[1016]: error initializing udev control socket [ 7.282476] random: dd: uninitialized urandom read (512 bytes read) diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dts b/arch/arm64/boot/dts/qcom/msm8998-mtp.dts index 66540d2ca13b..c9eea78cfdb6 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dts @@ -9,5 +9,5 @@ model = "Qualcomm Technologies, Inc. MSM8998 v1 MTP"; compatible = "qcom,msm8998-mtp"; - qcom,board-id = <8 0>; + qcom,board-id = <8 1>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi index b4276da1fb0d..e1c87de39076 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi @@ -241,3 +241,49 @@ }; }; }; + +&ufshc { + status = "ok"; +/*** vdd-hba-supply = <&gcc UFS_GDSC>; -EPROBE_DEFER ***/ + pinctrl-names = "dev-reset-assert", "dev-reset-deassert"; + pinctrl-0 = <&ufs_dev_reset_assert>; + pinctrl-1 = <&ufs_dev_reset_deassert>; + vdd-hba-fixed-regulator; + vcc-supply = <&vreg_l20a_2p95>; + vccq-supply = <&vreg_l26a_1p2>; + vccq2-supply = <&vreg_s4a_1p8>; + vcc-max-microamp = <750000>; + vccq-max-microamp = <560000>; + vccq2-max-microamp = <750000>; +}; + +&ufsphy { + status = "ok"; + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l2a_1p2>; + vddp-ref-clk-supply = <&vreg_l26a_1p2>; + vdda-phy-max-microamp = <51400>; + vdda-pll-max-microamp = <14600>; + vddp-ref-clk-max-microamp = <100>; + vddp-ref-clk-always-on; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <81 4>; + ufs_dev_reset_assert: ufs_dev_reset_assert { + config { + pins = "ufs_reset"; + bias-pull-down; + drive-strength = <8>; + output-low; + }; + }; + ufs_dev_reset_deassert: ufs_dev_reset_deassert { + config { + pins = "ufs_reset"; + bias-pull-down; + drive-strength = <8>; + output-high; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index 78227cce16db..03ba269f5440 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -3,11 +3,12 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8998.h> +#include <dt-bindings/clock/qcom,rpmcc.h> / { interrupt-parent = <&intc>; - qcom,msm-id = <292 0x0>; + qcom,msm-id = <319 0x20001>; #address-cells = <2>; #size-cells = <2>; @@ -264,6 +265,11 @@ rpm_requests: rpm-requests { compatible = "qcom,rpm-msm8998"; qcom,glink-channels = "rpm_requests"; + + rpmcc: qcom,rpmcc { + compatible = "qcom,rpmcc-msm8998"; + #clock-cells = <1>; + }; }; }; @@ -686,5 +692,75 @@ redistributor-stride = <0x0 0x20000>; interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; }; + + ufshc: ufshc@1da4000 { + compatible = "qcom,msm8998-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0x1da4000 0x2500>; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + phys = <&ufsphy_lanes>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + power-domains = <&gcc UFS_GDSC>; + + clock-names = + "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "core_clk_ice", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + clocks = + <&gcc GCC_UFS_AXI_CLK>, + <&gcc GCC_AGGRE1_UFS_AXI_CLK>, + <&gcc GCC_UFS_AHB_CLK>, + <&gcc GCC_UFS_UNIPRO_CORE_CLK>, + <&gcc GCC_UFS_ICE_CORE_CLK>, + <&rpmcc RPM_SMD_BB_CLK1>, + <&gcc GCC_UFS_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_RX_SYMBOL_1_CLK>; + freq-table-hz = + <50000000 200000000>, + <0 0>, + <0 0>, + <37500000 150000000>, + <75000000 300000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>; + + resets = <&gcc GCC_UFS_BCR>; + reset-names = "rst"; + + status = "disabled"; + }; + + ufsphy: phy@1da7000 { + compatible = "qcom,sdm845-qmp-ufs-phy"; + reg = <0x1da7000 0x18c>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clock-names = "ref", "ref_aux"; + clocks = + <&gcc GCC_UFS_CLKREF_CLK>, + <&gcc GCC_UFS_PHY_AUX_CLK>; + + status = "disabled"; + + ufsphy_lanes: lanes@1da7400 { + reg = <0x1da7400 0x108>, + <0x1da7600 0x1e0>, + <0x1da7c00 0x1dc>, + <0x1da7800 0x108>, + <0x1da7a00 0x1e0>; + #phy-cells = <0>; + }; + }; }; }; diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index c9a57d11330b..ae2f4588a450 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -1,15 +1,10 @@ CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_AUDIT=y CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y CONFIG_IRQ_TIME_ACCOUNTING=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y -CONFIG_TASKSTATS=y -CONFIG_TASK_DELAY_ACCT=y -CONFIG_TASK_XACCT=y -CONFIG_TASK_IO_ACCOUNTING=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_NUMA_BALANCING=y @@ -28,249 +23,64 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_KALLSYMS_ALL=y # CONFIG_COMPAT_BRK is not set CONFIG_PROFILING=y -CONFIG_JUMP_LABEL=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_ARCH_SUNXI=y -CONFIG_ARCH_ALPINE=y -CONFIG_ARCH_BCM2835=y -CONFIG_ARCH_BCM_IPROC=y -CONFIG_ARCH_BERLIN=y -CONFIG_ARCH_BRCMSTB=y -CONFIG_ARCH_EXYNOS=y -CONFIG_ARCH_K3=y -CONFIG_ARCH_LAYERSCAPE=y -CONFIG_ARCH_LG1K=y -CONFIG_ARCH_HISI=y -CONFIG_ARCH_MEDIATEK=y -CONFIG_ARCH_MESON=y -CONFIG_ARCH_MVEBU=y CONFIG_ARCH_QCOM=y -CONFIG_ARCH_ROCKCHIP=y -CONFIG_ARCH_SEATTLE=y -CONFIG_ARCH_SYNQUACER=y -CONFIG_ARCH_RENESAS=y -CONFIG_ARCH_R8A774A1=y -CONFIG_ARCH_R8A774C0=y -CONFIG_ARCH_R8A7795=y -CONFIG_ARCH_R8A7796=y -CONFIG_ARCH_R8A77965=y -CONFIG_ARCH_R8A77970=y -CONFIG_ARCH_R8A77980=y -CONFIG_ARCH_R8A77990=y -CONFIG_ARCH_R8A77995=y -CONFIG_ARCH_STRATIX10=y -CONFIG_ARCH_TEGRA=y -CONFIG_ARCH_SPRD=y -CONFIG_ARCH_THUNDER=y -CONFIG_ARCH_THUNDER2=y -CONFIG_ARCH_UNIPHIER=y -CONFIG_ARCH_VEXPRESS=y -CONFIG_ARCH_XGENE=y -CONFIG_ARCH_ZX=y -CONFIG_ARCH_ZYNQMP=y CONFIG_PCI=y CONFIG_PCIEPORTBUS=y -CONFIG_PCI_IOV=y -CONFIG_HOTPLUG_PCI=y -CONFIG_HOTPLUG_PCI_ACPI=y -CONFIG_PCI_AARDVARK=y -CONFIG_PCI_TEGRA=y -CONFIG_PCIE_RCAR=y CONFIG_PCI_HOST_GENERIC=y -CONFIG_PCI_XGENE=y -CONFIG_PCI_HOST_THUNDER_PEM=y -CONFIG_PCI_HOST_THUNDER_ECAM=y -CONFIG_PCIE_ROCKCHIP_HOST=m -CONFIG_PCI_LAYERSCAPE=y -CONFIG_PCI_HISI=y +CONFIG_PCIE_DW_PLAT_HOST=y CONFIG_PCIE_QCOM=y -CONFIG_PCIE_ARMADA_8K=y -CONFIG_PCIE_KIRIN=y -CONFIG_PCIE_HISI_STB=y CONFIG_ARM64_VA_BITS_48=y CONFIG_SCHED_MC=y +CONFIG_HOTPLUG_CPU=y CONFIG_NUMA=y -CONFIG_PREEMPT=y -CONFIG_KSM=y -CONFIG_MEMORY_FAILURE=y -CONFIG_TRANSPARENT_HUGEPAGE=y -CONFIG_CMA=y CONFIG_SECCOMP=y -CONFIG_KEXEC=y CONFIG_CRASH_DUMP=y CONFIG_XEN=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_COMPAT=y -CONFIG_HIBERNATION=y -CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y -CONFIG_ARM_CPUIDLE=y -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_STAT=y -CONFIG_CPU_FREQ_GOV_POWERSAVE=m -CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m -CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y -CONFIG_CPUFREQ_DT=y -CONFIG_ACPI_CPPC_CPUFREQ=m -CONFIG_ARM_ARMADA_37XX_CPUFREQ=y -CONFIG_ARM_BIG_LITTLE_CPUFREQ=y -CONFIG_ARM_SCPI_CPUFREQ=y -CONFIG_ARM_TEGRA186_CPUFREQ=y -CONFIG_TI_SCI_PROTOCOL=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IPV6=m -CONFIG_NETFILTER=y -CONFIG_NF_CONNTRACK=m -CONFIG_NF_CONNTRACK_EVENTS=y -CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m -CONFIG_NETFILTER_XT_TARGET_LOG=m -CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m -CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m -CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_MANGLE=m -CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_REJECT=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_NAT=m -CONFIG_IP6_NF_TARGET_MASQUERADE=m -CONFIG_BRIDGE=m -CONFIG_BRIDGE_VLAN_FILTERING=y -CONFIG_VLAN_8021Q=m -CONFIG_VLAN_8021Q_GVRP=y -CONFIG_VLAN_8021Q_MVRP=y -CONFIG_QRTR=m -CONFIG_QRTR_SMD=m -CONFIG_QRTR_TUN=m -CONFIG_BPF_JIT=y -CONFIG_BT=m -CONFIG_BT_HIDP=m -# CONFIG_BT_HS is not set -# CONFIG_BT_LE is not set -CONFIG_BT_LEDS=y -# CONFIG_BT_DEBUGFS is not set -CONFIG_BT_HCIBTUSB=m -CONFIG_BT_HCIUART=m -CONFIG_BT_HCIUART_LL=y -CONFIG_BT_HCIUART_BCM=y -CONFIG_CFG80211=m -CONFIG_MAC80211=m -CONFIG_MAC80211_LEDS=y -CONFIG_RFKILL=m -CONFIG_NET_9P=y -CONFIG_NET_9P_VIRTIO=y +# CONFIG_SUSPEND is not set +CONFIG_PM=y +CONFIG_ARM_SCPI_PROTOCOL=y +CONFIG_EFI_CAPSULE_LOADER=y +CONFIG_ARM64_CRYPTO=y +CONFIG_CRYPTO_SHA1_ARM64_CE=y +CONFIG_CRYPTO_SHA2_ARM64_CE=y +CONFIG_CRYPTO_SHA512_ARM64_CE=m +CONFIG_CRYPTO_SHA3_ARM64=m +CONFIG_CRYPTO_SM3_ARM64_CE=m +CONFIG_CRYPTO_GHASH_ARM64_CE=y +CONFIG_CRYPTO_CRCT10DIF_ARM64_CE=m +CONFIG_CRYPTO_AES_ARM64_CE_CCM=y +CONFIG_CRYPTO_AES_ARM64_CE_BLK=y +CONFIG_CRYPTO_CHACHA20_NEON=m +CONFIG_CRYPTO_AES_ARM64_BS=m +CONFIG_JUMP_LABEL=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_BLK_DEV_INTEGRITY=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_KSM=y +CONFIG_MEMORY_FAILURE=y +CONFIG_TRANSPARENT_HUGEPAGE=y +CONFIG_CMA=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_DMA_CMA=y CONFIG_CMA_SIZE_MBYTES=32 -CONFIG_HISILICON_LPC=y -CONFIG_SIMPLE_PM_BUS=y -CONFIG_MTD=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_M25P80=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_DENALI_DT=y -CONFIG_MTD_NAND_MARVELL=y -CONFIG_MTD_NAND_QCOM=y -CONFIG_MTD_SPI_NOR=y +CONFIG_BRCMSTB_GISB_ARB=y +CONFIG_VEXPRESS_CONFIG=y +CONFIG_OF_OVERLAY=y CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_NBD=m CONFIG_VIRTIO_BLK=y -CONFIG_BLK_DEV_NVME=m CONFIG_SRAM=y CONFIG_EEPROM_AT25=m +CONFIG_SCSI=y # CONFIG_SCSI_PROC_FS is not set CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_SAS_ATA=y -CONFIG_SCSI_HISI_SAS=y -CONFIG_SCSI_HISI_SAS_PCI=y -CONFIG_SCSI_UFSHCD=m -CONFIG_SCSI_UFSHCD_PLATFORM=m -CONFIG_SCSI_UFS_HISI=y -CONFIG_SCSI_UFS_QCOM=m -CONFIG_ATA=y -CONFIG_SATA_AHCI=y -CONFIG_SATA_AHCI_PLATFORM=y -CONFIG_AHCI_CEVA=y -CONFIG_AHCI_MVEBU=y -CONFIG_AHCI_XGENE=y -CONFIG_AHCI_QORIQ=y -CONFIG_SATA_SIL24=y -CONFIG_SATA_RCAR=y -CONFIG_PATA_PLATFORM=y -CONFIG_PATA_OF_PLATFORM=y -CONFIG_NETDEVICES=y -CONFIG_MACVLAN=m -CONFIG_MACVTAP=m -CONFIG_TUN=y -CONFIG_VETH=m -CONFIG_VIRTIO_NET=y -CONFIG_AMD_XGBE=y -CONFIG_NET_XGENE=y -CONFIG_ATL1C=m -CONFIG_MACB=y -CONFIG_THUNDER_NIC_PF=y -CONFIG_HIX5HD2_GMAC=y -CONFIG_HNS_DSAF=y -CONFIG_HNS_ENET=y -CONFIG_HNS3=y -CONFIG_HNS3_HCLGE=y -CONFIG_HNS3_ENET=y -CONFIG_E1000E=y -CONFIG_IGB=y -CONFIG_IGBVF=y -CONFIG_MVNETA=y -CONFIG_MVPP2=y -CONFIG_SKY2=y -CONFIG_QCOM_EMAC=m -CONFIG_RAVB=y -CONFIG_SMC91X=y -CONFIG_SMSC911X=y -CONFIG_SNI_AVE=y -CONFIG_SNI_NETSEC=y -CONFIG_STMMAC_ETH=m -CONFIG_MDIO_BUS_MUX_MMIOREG=y -CONFIG_AT803X_PHY=m -CONFIG_MARVELL_PHY=m -CONFIG_MARVELL_10G_PHY=m -CONFIG_MESON_GXL_PHY=m -CONFIG_MICREL_PHY=y -CONFIG_REALTEK_PHY=m -CONFIG_ROCKCHIP_PHY=y -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_RTL8152=m -CONFIG_USB_LAN78XX=m -CONFIG_USB_USBNET=m -CONFIG_USB_NET_DM9601=m -CONFIG_USB_NET_SR9800=m -CONFIG_USB_NET_SMSC75XX=m -CONFIG_USB_NET_SMSC95XX=m -CONFIG_USB_NET_PLUSB=m -CONFIG_USB_NET_MCS7830=m -CONFIG_ATH10K=m -CONFIG_ATH10K_PCI=m -CONFIG_BRCMFMAC=m -CONFIG_MWIFIEX=m -CONFIG_MWIFIEX_PCIE=m -CONFIG_WL18XX=m -CONFIG_WLCORE_SDIO=m +CONFIG_SCSI_SAS_LIBSAS=y +CONFIG_SCSI_UFSHCD=y +CONFIG_SCSI_UFSHCD_PLATFORM=y +CONFIG_SCSI_UFS_QCOM=y CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_ADC=m CONFIG_KEYBOARD_GPIO=y @@ -279,7 +89,6 @@ CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ATMEL_MXT=m CONFIG_INPUT_MISC=y CONFIG_INPUT_PM8941_PWRKEY=y -CONFIG_INPUT_HISI_POWERKEY=y # CONFIG_SERIO_SERPORT is not set CONFIG_SERIO_AMBAKMI=y CONFIG_LEGACY_PTY_COUNT=16 @@ -287,25 +96,14 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_8250_BCM2835AUX=y CONFIG_SERIAL_8250_DW=y -CONFIG_SERIAL_8250_OMAP=y -CONFIG_SERIAL_8250_MT6577=y -CONFIG_SERIAL_8250_UNIPHIER=y CONFIG_SERIAL_OF_PLATFORM=y CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -CONFIG_SERIAL_MESON=y -CONFIG_SERIAL_MESON_CONSOLE=y -CONFIG_SERIAL_SAMSUNG=y -CONFIG_SERIAL_SAMSUNG_CONSOLE=y -CONFIG_SERIAL_TEGRA=y -CONFIG_SERIAL_SH_SCI=y CONFIG_SERIAL_MSM=y CONFIG_SERIAL_MSM_CONSOLE=y CONFIG_SERIAL_XILINX_PS_UART=y CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y -CONFIG_SERIAL_MVEBU_UART=y CONFIG_SERIAL_DEV_BUS=y CONFIG_VIRTIO_CONSOLE=y CONFIG_IPMI_HANDLER=m @@ -316,154 +114,81 @@ CONFIG_TCG_TIS_I2C_INFINEON=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_MUX=y CONFIG_I2C_MUX_PCA954x=y -CONFIG_I2C_BCM2835=m CONFIG_I2C_DESIGNWARE_PLATFORM=y -CONFIG_I2C_IMX=y -CONFIG_I2C_MESON=y -CONFIG_I2C_MV64XXX=y -CONFIG_I2C_PXA=y CONFIG_I2C_QUP=y CONFIG_I2C_RK3X=y -CONFIG_I2C_SH_MOBILE=y -CONFIG_I2C_TEGRA=y -CONFIG_I2C_UNIPHIER_F=y -CONFIG_I2C_RCAR=y CONFIG_I2C_CROS_EC_TUNNEL=y +CONFIG_I2C_SLAVE=y CONFIG_SPI=y -CONFIG_SPI_ARMADA_3700=y -CONFIG_SPI_BCM2835=m -CONFIG_SPI_BCM2835AUX=m -CONFIG_SPI_MESON_SPICC=m -CONFIG_SPI_MESON_SPIFC=m -CONFIG_SPI_ORION=y +CONFIG_SPI_MEM=y CONFIG_SPI_PL022=y CONFIG_SPI_ROCKCHIP=y CONFIG_SPI_QUP=y -CONFIG_SPI_S3C64XX=y CONFIG_SPI_SPIDEV=m CONFIG_SPMI=y +CONFIG_PPS=y CONFIG_PINCTRL_SINGLE=y CONFIG_PINCTRL_MAX77620=y CONFIG_PINCTRL_IPQ8074=y CONFIG_PINCTRL_MSM8916=y CONFIG_PINCTRL_MSM8994=y CONFIG_PINCTRL_MSM8996=y -CONFIG_PINCTRL_QDF2XXX=y +CONFIG_PINCTRL_MSM8998=y CONFIG_PINCTRL_QCOM_SPMI_PMIC=y -CONFIG_PINCTRL_MT7622=y CONFIG_GPIO_DWAPB=y CONFIG_GPIO_MB86S7X=y CONFIG_GPIO_PL061=y -CONFIG_GPIO_RCAR=y -CONFIG_GPIO_UNIPHIER=y CONFIG_GPIO_XGENE=y -CONFIG_GPIO_XGENE_SB=y CONFIG_GPIO_PCA953X=y CONFIG_GPIO_PCA953X_IRQ=y CONFIG_GPIO_MAX77620=y -CONFIG_POWER_AVS=y -CONFIG_ROCKCHIP_IODOMAIN=y +CONFIG_POWER_RESET_BRCMSTB=y CONFIG_POWER_RESET_MSM=y +CONFIG_POWER_RESET_QCOM_PON=y +CONFIG_POWER_RESET_RESTART=y +CONFIG_POWER_RESET_VEXPRESS=y CONFIG_POWER_RESET_XGENE=y CONFIG_POWER_RESET_SYSCON=y +CONFIG_POWER_RESET_SYSCON_POWEROFF=y CONFIG_SYSCON_REBOOT_MODE=y CONFIG_BATTERY_SBS=m CONFIG_BATTERY_BQ27XXX=y CONFIG_SENSORS_ARM_SCPI=y CONFIG_SENSORS_LM90=m CONFIG_SENSORS_INA2XX=m -CONFIG_SENSORS_RASPBERRYPI_HWMON=m +CONFIG_THERMAL=y CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y -CONFIG_CPU_THERMAL=y CONFIG_THERMAL_EMULATION=y -CONFIG_ROCKCHIP_THERMAL=m -CONFIG_RCAR_GEN3_THERMAL=y -CONFIG_ARMADA_THERMAL=y -CONFIG_BRCMSTB_THERMAL=m -CONFIG_EXYNOS_THERMAL=y -CONFIG_TEGRA_BPMP_THERMAL=m CONFIG_QCOM_TSENS=y -CONFIG_UNIPHIER_THERMAL=y CONFIG_WATCHDOG=y CONFIG_ARM_SP805_WATCHDOG=y -CONFIG_S3C2410_WATCHDOG=y -CONFIG_MESON_GXBB_WATCHDOG=m -CONFIG_MESON_WATCHDOG=m -CONFIG_RENESAS_WDT=y -CONFIG_UNIPHIER_WATCHDOG=y -CONFIG_BCM2835_WDT=y CONFIG_MFD_BD9571MWV=y -CONFIG_MFD_AXP20X_RSB=y CONFIG_MFD_CROS_EC=y -CONFIG_CROS_EC_I2C=y -CONFIG_CROS_EC_SPI=y CONFIG_MFD_CROS_EC_CHARDEV=m -CONFIG_MFD_EXYNOS_LPASS=m CONFIG_MFD_HI6421_PMIC=y -CONFIG_MFD_HI655X_PMIC=y CONFIG_MFD_MAX77620=y CONFIG_MFD_SPMI_PMIC=y CONFIG_MFD_RK808=y CONFIG_MFD_SEC_CORE=y CONFIG_REGULATOR_FIXED_VOLTAGE=y -CONFIG_REGULATOR_AXP20X=y CONFIG_REGULATOR_BD9571MWV=y CONFIG_REGULATOR_FAN53555=y CONFIG_REGULATOR_GPIO=y CONFIG_REGULATOR_HI6421V530=y -CONFIG_REGULATOR_HI655X=y CONFIG_REGULATOR_MAX77620=y CONFIG_REGULATOR_PWM=y +CONFIG_REGULATOR_QCOM_RPMH=y CONFIG_REGULATOR_QCOM_SMD_RPM=y CONFIG_REGULATOR_QCOM_SPMI=y CONFIG_REGULATOR_RK808=y CONFIG_REGULATOR_S2MPS11=y -CONFIG_REGULATOR_VCTRL=m -CONFIG_RC_CORE=m -CONFIG_RC_DECODERS=y -CONFIG_RC_DEVICES=y -CONFIG_IR_MESON=m -CONFIG_MEDIA_SUPPORT=m -CONFIG_MEDIA_CAMERA_SUPPORT=y -CONFIG_MEDIA_ANALOG_TV_SUPPORT=y -CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y -CONFIG_MEDIA_CONTROLLER=y -CONFIG_VIDEO_V4L2_SUBDEV_API=y -# CONFIG_DVB_NET is not set -CONFIG_V4L_MEM2MEM_DRIVERS=y -CONFIG_MEDIA_USB_SUPPORT=y -CONFIG_USB_VIDEO_CLASS=m -CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m -CONFIG_VIDEO_SAMSUNG_S5P_MFC=m -CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m -CONFIG_VIDEO_RENESAS_FCP=m -CONFIG_VIDEO_RENESAS_VSP1=m -CONFIG_DRM=m -CONFIG_DRM_NOUVEAU=m -CONFIG_DRM_EXYNOS=m -CONFIG_DRM_EXYNOS5433_DECON=y -CONFIG_DRM_EXYNOS7_DECON=y -CONFIG_DRM_EXYNOS_DSI=y -# CONFIG_DRM_EXYNOS_DP is not set -CONFIG_DRM_EXYNOS_HDMI=y -CONFIG_DRM_EXYNOS_MIC=y -CONFIG_DRM_ROCKCHIP=m -CONFIG_DRM_SUN4I=m -CONFIG_ROCKCHIP_ANALOGIX_DP=y -CONFIG_ROCKCHIP_CDN_DP=y -CONFIG_ROCKCHIP_DW_HDMI=y -CONFIG_ROCKCHIP_DW_MIPI_DSI=y -CONFIG_ROCKCHIP_INNO_HDMI=y -CONFIG_DRM_RCAR_DU=m -CONFIG_DRM_RCAR_LVDS=m -CONFIG_DRM_TEGRA=m +CONFIG_REGULATOR_VCTRL=y +CONFIG_DRM=y +CONFIG_DRM_I2C_CH7006=m +CONFIG_DRM_I2C_SIL164=m +CONFIG_DRM_MSM_REGISTER_LOGGING=y CONFIG_DRM_PANEL_SIMPLE=m CONFIG_DRM_I2C_ADV7511=m -CONFIG_DRM_VC4=m -CONFIG_DRM_HISI_HIBMC=m -CONFIG_DRM_HISI_KIRIN=m -CONFIG_DRM_MESON=m -CONFIG_FB=y CONFIG_FB_ARMCLCD=y CONFIG_BACKLIGHT_GENERIC=m CONFIG_BACKLIGHT_PWM=m @@ -471,244 +196,126 @@ CONFIG_BACKLIGHT_LP855X=m CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set -CONFIG_SOUND=y -CONFIG_SND=y -CONFIG_SND_SOC=y -CONFIG_SND_BCM2835_SOC_I2S=m -CONFIG_SND_SOC_ROCKCHIP=m -CONFIG_SND_SOC_ROCKCHIP_I2S=m -CONFIG_SND_SOC_ROCKCHIP_SPDIF=m -CONFIG_SND_SOC_ROCKCHIP_RT5645=m -CONFIG_SND_SOC_RK3399_GRU_SOUND=m -CONFIG_SND_SOC_SAMSUNG=y -CONFIG_SND_SOC_RCAR=m -CONFIG_SND_SOC_AK4613=m -CONFIG_SND_SOC_DA7219=m -CONFIG_SND_SOC_MAX98357A=m -CONFIG_SND_SOC_RL6231=m -CONFIG_SND_SOC_RT5514=m -CONFIG_SND_SOC_RT5514_SPI=m -CONFIG_SND_SOC_RT5645=m -CONFIG_SND_SIMPLE_CARD=m -CONFIG_SND_AUDIO_GRAPH_CARD=m CONFIG_I2C_HID=m -CONFIG_USB=y -CONFIG_USB_OTG=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_TEGRA=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_EXYNOS=y -CONFIG_USB_EHCI_HCD_PLATFORM=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_EXYNOS=y -CONFIG_USB_OHCI_HCD_PLATFORM=y -CONFIG_USB_RENESAS_USBHS=m -CONFIG_USB_STORAGE=y -CONFIG_USB_MUSB_HDRC=y -CONFIG_USB_MUSB_SUNXI=y -CONFIG_USB_DWC3=y -CONFIG_USB_DWC2=y -CONFIG_USB_CHIPIDEA=y -CONFIG_USB_CHIPIDEA_UDC=y -CONFIG_USB_CHIPIDEA_HOST=y -CONFIG_USB_CHIPIDEA_ULPI=y -CONFIG_USB_ISP1760=y -CONFIG_USB_HSIC_USB3503=y -CONFIG_NOP_USB_XCEIV=y -CONFIG_USB_ULPI=y -CONFIG_USB_GADGET=y -CONFIG_USB_RENESAS_USBHS_UDC=m -CONFIG_USB_RENESAS_USB3=m -CONFIG_USB_ULPI_BUS=y -CONFIG_MMC=y -CONFIG_MMC_BLOCK_MINORS=32 -CONFIG_MMC_ARMMMCI=y -CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_ACPI=y -CONFIG_MMC_SDHCI_PLTFM=y -CONFIG_MMC_SDHCI_OF_ARASAN=y -CONFIG_MMC_SDHCI_OF_ESDHC=y -CONFIG_MMC_SDHCI_CADENCE=y -CONFIG_MMC_SDHCI_TEGRA=y -CONFIG_MMC_SDHCI_F_SDH30=y -CONFIG_MMC_MESON_GX=y -CONFIG_MMC_SDHCI_MSM=y -CONFIG_MMC_SPI=y -CONFIG_MMC_SDHI=y -CONFIG_MMC_UNIPHIER=y -CONFIG_MMC_DW=y -CONFIG_MMC_DW_EXYNOS=y -CONFIG_MMC_DW_HI3798CV200=y -CONFIG_MMC_DW_K3=y -CONFIG_MMC_DW_ROCKCHIP=y -CONFIG_MMC_SUNXI=y -CONFIG_MMC_BCM2835=y -CONFIG_MMC_SDHCI_XENON=y -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_PWM=y -CONFIG_LEDS_SYSCON=y -CONFIG_LEDS_TRIGGER_DISK=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_LEDS_TRIGGER_CPU=y -CONFIG_LEDS_TRIGGER_DEFAULT_ON=y -CONFIG_LEDS_TRIGGER_PANIC=y +# CONFIG_USB_SUPPORT is not set CONFIG_EDAC=y -CONFIG_EDAC_GHES=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_MAX77686=y -CONFIG_RTC_DRV_RK808=m -CONFIG_RTC_DRV_S5M=y -CONFIG_RTC_DRV_DS3232=y -CONFIG_RTC_DRV_EFI=y -CONFIG_RTC_DRV_CROS_EC=y -CONFIG_RTC_DRV_S3C=y -CONFIG_RTC_DRV_PL031=y -CONFIG_RTC_DRV_SUN6I=y -CONFIG_RTC_DRV_ARMADA38X=y -CONFIG_RTC_DRV_TEGRA=y -CONFIG_RTC_DRV_XGENE=y CONFIG_DMADEVICES=y -CONFIG_DMA_BCM2835=m -CONFIG_K3_DMA=y CONFIG_MV_XOR_V2=y CONFIG_PL330_DMA=y -CONFIG_TEGRA20_APB_DMA=y CONFIG_QCOM_BAM_DMA=y CONFIG_QCOM_HIDMA_MGMT=y CONFIG_QCOM_HIDMA=y -CONFIG_RCAR_DMAC=y -CONFIG_RENESAS_USB_DMAC=m CONFIG_VFIO=y -CONFIG_VFIO_PCI=y -CONFIG_VIRTIO_PCI=y CONFIG_VIRTIO_BALLOON=y CONFIG_VIRTIO_MMIO=y CONFIG_XEN_GNTDEV=y CONFIG_XEN_GRANT_DEV_ALLOC=y +CONFIG_CROS_EC_I2C=y +CONFIG_CROS_EC_SPI=y +CONFIG_COMMON_CLK_VERSATILE=y +CONFIG_CLK_SP810=y +CONFIG_CLK_VEXPRESS_OSC=y CONFIG_COMMON_CLK_RK808=y CONFIG_COMMON_CLK_SCPI=y CONFIG_COMMON_CLK_CS2000_CP=y CONFIG_COMMON_CLK_S2MPS11=y CONFIG_CLK_QORIQ=y CONFIG_COMMON_CLK_PWM=y -CONFIG_TI_SCI_CLK=y CONFIG_COMMON_CLK_QCOM=y CONFIG_QCOM_CLK_SMD_RPM=y +CONFIG_QCOM_CLK_RPMH=y CONFIG_IPQ_GCC_8074=y CONFIG_MSM_GCC_8916=y CONFIG_MSM_GCC_8994=y CONFIG_MSM_MMCC_8996=y +CONFIG_MSM_GCC_8998=y +CONFIG_SPMI_PMIC_CLKDIV=y +CONFIG_QCOM_HFPLL=y CONFIG_HWSPINLOCK=y CONFIG_HWSPINLOCK_QCOM=y +CONFIG_ARM_TIMER_SP804=y +CONFIG_MAILBOX=y CONFIG_ARM_MHU=y CONFIG_PLATFORM_MHU=y -CONFIG_BCM2835_MBOX=y -CONFIG_TI_MESSAGE_MANAGER=y CONFIG_QCOM_APCS_IPC=y -CONFIG_ROCKCHIP_IOMMU=y -CONFIG_TEGRA_IOMMU_SMMU=y CONFIG_ARM_SMMU=y CONFIG_ARM_SMMU_V3=y CONFIG_QCOM_IOMMU=y CONFIG_RPMSG_QCOM_GLINK_RPM=y +CONFIG_RPMSG_QCOM_GLINK_SMEM=y CONFIG_RPMSG_QCOM_SMD=y -CONFIG_RASPBERRYPI_POWER=y +CONFIG_RPMSG_VIRTIO=y +CONFIG_QCOM_COMMAND_DB=y +CONFIG_QCOM_GENI_SE=y +CONFIG_QCOM_GSBI=y +CONFIG_QCOM_LLCC=y +CONFIG_QCOM_SDM845_LLCC=y +CONFIG_QCOM_RMTFS_MEM=y +CONFIG_QCOM_RPMH=y CONFIG_QCOM_SMEM=y CONFIG_QCOM_SMD_RPM=y CONFIG_QCOM_SMP2P=y CONFIG_QCOM_SMSM=y -CONFIG_ROCKCHIP_PM_DOMAINS=y -CONFIG_ARCH_TEGRA_132_SOC=y -CONFIG_ARCH_TEGRA_210_SOC=y -CONFIG_ARCH_TEGRA_186_SOC=y -CONFIG_ARCH_TEGRA_194_SOC=y -CONFIG_ARCH_K3_AM6_SOC=y -CONFIG_SOC_TI=y -CONFIG_TI_SCI_PM_DOMAINS=y -CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y +CONFIG_QCOM_WCNSS_CTRL=y +CONFIG_QCOM_APR=y +CONFIG_DEVFREQ_GOV_PERFORMANCE=y +CONFIG_PM_DEVFREQ_EVENT=y +CONFIG_EXTCON=y CONFIG_EXTCON_USB_GPIO=y CONFIG_EXTCON_USBC_CROS_EC=y CONFIG_MEMORY=y CONFIG_IIO=y -CONFIG_EXYNOS_ADC=y -CONFIG_ROCKCHIP_SARADC=m CONFIG_IIO_CROS_EC_SENSORS_CORE=m CONFIG_IIO_CROS_EC_SENSORS=m CONFIG_IIO_CROS_EC_LIGHT_PROX=m CONFIG_IIO_CROS_EC_BARO=m CONFIG_PWM=y -CONFIG_PWM_BCM2835=m CONFIG_PWM_CROS_EC=m -CONFIG_PWM_MESON=m -CONFIG_PWM_RCAR=m -CONFIG_PWM_ROCKCHIP=y -CONFIG_PWM_SAMSUNG=y -CONFIG_PWM_TEGRA=m -CONFIG_RESET_TI_SCI=y -CONFIG_PHY_XGENE=y -CONFIG_PHY_SUN4I_USB=y -CONFIG_PHY_HI6220_USB=y -CONFIG_PHY_HISTB_COMBPHY=y -CONFIG_PHY_HISI_INNO_USB2=y -CONFIG_PHY_MVEBU_CP110_COMPHY=y -CONFIG_PHY_QCOM_QMP=m -CONFIG_PHY_QCOM_USB_HS=y -CONFIG_PHY_RCAR_GEN3_USB2=y -CONFIG_PHY_RCAR_GEN3_USB3=m -CONFIG_PHY_ROCKCHIP_EMMC=y -CONFIG_PHY_ROCKCHIP_INNO_HDMI=m -CONFIG_PHY_ROCKCHIP_INNO_USB2=y -CONFIG_PHY_ROCKCHIP_PCIE=m -CONFIG_PHY_ROCKCHIP_TYPEC=y -CONFIG_PHY_TEGRA_XUSB=y -CONFIG_PHY_UNIPHIER_USB3=y -CONFIG_PHY_UNIPHIER_USB2=y -CONFIG_HISI_PMU=y -CONFIG_QCOM_L2_PMU=y -CONFIG_QCOM_L3_PMU=y +CONFIG_QCOM_PDC=y +CONFIG_PHY_QCOM_APQ8064_SATA=y +CONFIG_PHY_QCOM_IPQ806X_SATA=y +CONFIG_PHY_QCOM_QMP=y +CONFIG_PHY_QCOM_QUSB2=y CONFIG_QCOM_QFPROM=y -CONFIG_ROCKCHIP_EFUSE=y -CONFIG_UNIPHIER_EFUSE=y -CONFIG_MESON_EFUSE=m CONFIG_TEE=y CONFIG_OPTEE=y -CONFIG_ARM_SCPI_PROTOCOL=y -CONFIG_RASPBERRYPI_FIRMWARE=y -CONFIG_EFI_CAPSULE_LOADER=y -CONFIG_ACPI=y -CONFIG_ACPI_APEI=y -CONFIG_ACPI_APEI_GHES=y -CONFIG_ACPI_APEI_MEMORY_FAILURE=y -CONFIG_ACPI_APEI_EINJ=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y +CONFIG_EXT4_FS=y CONFIG_EXT4_FS_POSIX_ACL=y -CONFIG_BTRFS_FS=m -CONFIG_BTRFS_FS_POSIX_ACL=y CONFIG_FANOTIFY=y CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y CONFIG_QUOTA=y CONFIG_AUTOFS4_FS=y -CONFIG_FUSE_FS=m -CONFIG_CUSE=m -CONFIG_OVERLAY_FS=m CONFIG_VFAT_FS=y CONFIG_HUGETLBFS=y CONFIG_CONFIGFS_FS=y CONFIG_EFIVAR_FS=y -CONFIG_SQUASHFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V4=y -CONFIG_NFS_V4_1=y -CONFIG_NFS_V4_2=y -CONFIG_ROOT_NFS=y -CONFIG_9P_FS=y +# CONFIG_MISC_FILESYSTEMS is not set CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y -CONFIG_VIRTUALIZATION=y -CONFIG_KVM=y +CONFIG_KEYS=y +CONFIG_SECURITY=y +CONFIG_CRYPTO_RSA=y +CONFIG_CRYPTO_ECDH=m +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_ECHAINIV=y +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CMAC=m +CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_ANSI_CPRNG=y +CONFIG_ASYMMETRIC_KEY_TYPE=y +CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y +CONFIG_X509_CERTIFICATE_PARSER=y +CONFIG_PKCS7_MESSAGE_PARSER=y +CONFIG_SYSTEM_TRUSTED_KEYRING=y +CONFIG_INDIRECT_PIO=y +CONFIG_CRC_ITU_T=y +CONFIG_CRC7=y +CONFIG_LIBCRC32C=m CONFIG_PRINTK_TIME=y CONFIG_DEBUG_INFO=y CONFIG_DEBUG_FS=y @@ -718,19 +325,3 @@ CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_PREEMPT is not set # CONFIG_FTRACE is not set CONFIG_MEMTEST=y -CONFIG_SECURITY=y -CONFIG_CRYPTO_ECHAINIV=y -CONFIG_CRYPTO_ANSI_CPRNG=y -CONFIG_CRYPTO_DEV_FSL_DPAA2_CAAM=y -CONFIG_ARM64_CRYPTO=y -CONFIG_CRYPTO_SHA1_ARM64_CE=y -CONFIG_CRYPTO_SHA2_ARM64_CE=y -CONFIG_CRYPTO_SHA512_ARM64_CE=m -CONFIG_CRYPTO_SHA3_ARM64=m -CONFIG_CRYPTO_SM3_ARM64_CE=m -CONFIG_CRYPTO_GHASH_ARM64_CE=y -CONFIG_CRYPTO_CRCT10DIF_ARM64_CE=m -CONFIG_CRYPTO_AES_ARM64_CE_CCM=y -CONFIG_CRYPTO_AES_ARM64_CE_BLK=y -CONFIG_CRYPTO_CHACHA20_NEON=m -CONFIG_CRYPTO_AES_ARM64_BS=m diff --git a/drivers/clk/qcom/clk-smd-rpm.c b/drivers/clk/qcom/clk-smd-rpm.c index 850c02a52248..be072897a80d 100644 --- a/drivers/clk/qcom/clk-smd-rpm.c +++ b/drivers/clk/qcom/clk-smd-rpm.c @@ -611,10 +611,113 @@ static const struct rpm_smd_clk_desc rpm_clk_msm8996 = { .num_clks = ARRAY_SIZE(msm8996_clks), }; +/* QCS404 */ +DEFINE_CLK_SMD_RPM_QDSS(qcs404, qdss_clk, qdss_a_clk, QCOM_SMD_RPM_MISC_CLK, 1); + +DEFINE_CLK_SMD_RPM(qcs404, pnoc_clk, pnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 0); +DEFINE_CLK_SMD_RPM(qcs404, snoc_clk, snoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 1); + +DEFINE_CLK_SMD_RPM(qcs404, bimc_clk, bimc_a_clk, QCOM_SMD_RPM_MEM_CLK, 0); +DEFINE_CLK_SMD_RPM(qcs404, bimc_gpu_clk, bimc_gpu_a_clk, QCOM_SMD_RPM_MEM_CLK, 2); + +DEFINE_CLK_SMD_RPM(qcs404, qpic_clk, qpic_a_clk, QCOM_SMD_RPM_QPIC_CLK, 0); +DEFINE_CLK_SMD_RPM(qcs404, ce1_clk, ce1_a_clk, QCOM_SMD_RPM_CE_CLK, 0); + +DEFINE_CLK_SMD_RPM_XO_BUFFER(qcs404, rf_clk1, rf_clk1_a, 4); +DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(qcs404, rf_clk1_pin, rf_clk1_a_pin, 4); + +DEFINE_CLK_SMD_RPM_XO_BUFFER(qcs404, ln_bb_clk, ln_bb_a_clk, 8); +DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(qcs404, ln_bb_clk_pin, ln_bb_clk_a_pin, 8); + +static struct clk_smd_rpm *qcs404_clks[] = { + [RPM_SMD_QDSS_CLK] = &qcs404_qdss_clk, + [RPM_SMD_QDSS_A_CLK] = &qcs404_qdss_a_clk, + [RPM_SMD_PNOC_CLK] = &qcs404_pnoc_clk, + [RPM_SMD_PNOC_A_CLK] = &qcs404_pnoc_a_clk, + [RPM_SMD_SNOC_CLK] = &qcs404_snoc_clk, + [RPM_SMD_SNOC_A_CLK] = &qcs404_snoc_a_clk, + [RPM_SMD_BIMC_CLK] = &qcs404_bimc_clk, + [RPM_SMD_BIMC_A_CLK] = &qcs404_bimc_a_clk, + [RPM_SMD_BIMC_GPU_CLK] = &qcs404_bimc_gpu_clk, + [RPM_SMD_BIMC_GPU_A_CLK] = &qcs404_bimc_gpu_a_clk, + [RPM_SMD_QPIC_CLK] = &qcs404_qpic_clk, + [RPM_SMD_QPIC_CLK_A] = &qcs404_qpic_a_clk, + [RPM_SMD_CE1_CLK] = &qcs404_ce1_clk, + [RPM_SMD_CE1_A_CLK] = &qcs404_ce1_a_clk, + [RPM_SMD_RF_CLK1] = &qcs404_rf_clk1, + [RPM_SMD_RF_CLK1_A] = &qcs404_rf_clk1_a, + [RPM_SMD_LN_BB_CLK] = &qcs404_ln_bb_clk, + [RPM_SMD_LN_BB_A_CLK] = &qcs404_ln_bb_a_clk, +}; + +static const struct rpm_smd_clk_desc rpm_clk_qcs404 = { + .clks = qcs404_clks, + .num_clks = ARRAY_SIZE(qcs404_clks), +}; + +/* msm8998 */ +DEFINE_CLK_SMD_RPM(msm8998, snoc_clk, snoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 1); +DEFINE_CLK_SMD_RPM(msm8998, cnoc_clk, cnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 2); +DEFINE_CLK_SMD_RPM(msm8998, ce1_clk, ce1_a_clk, QCOM_SMD_RPM_CE_CLK, 0); +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8998, div_clk1, div_clk1_a, 0xb); +DEFINE_CLK_SMD_RPM(msm8998, ipa_clk, ipa_a_clk, QCOM_SMD_RPM_IPA_CLK, 0); +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8998, bb_clk1, bb_clk1_a, 1); +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8998, bb_clk2, bb_clk2_a, 2); +DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8998, bb_clk3_pin, bb_clk3_a_pin, 3); +DEFINE_CLK_SMD_RPM(msm8998, mmssnoc_axi_rpm_clk, mmssnoc_axi_rpm_a_clk, + QCOM_SMD_RPM_MMAXI_CLK, 0); +DEFINE_CLK_SMD_RPM(msm8998, aggre1_noc_clk, aggre1_noc_a_clk, + QCOM_SMD_RPM_AGGR_CLK, 1); +DEFINE_CLK_SMD_RPM(msm8998, aggre2_noc_clk, aggre2_noc_a_clk, + QCOM_SMD_RPM_AGGR_CLK, 2); +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8998, rf_clk1, rf_clk1_a, 4); +DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8998, rf_clk2_pin, rf_clk2_a_pin, 5); +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8998, rf_clk3, rf_clk3_a, 6); +DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8998, rf_clk3_pin, rf_clk3_a_pin, 6); +static struct clk_smd_rpm *msm8998_clks[] = { + [RPM_SMD_SNOC_CLK] = &msm8998_snoc_clk, + [RPM_SMD_SNOC_A_CLK] = &msm8998_snoc_a_clk, + [RPM_SMD_CNOC_CLK] = &msm8998_cnoc_clk, + [RPM_SMD_CNOC_A_CLK] = &msm8998_cnoc_a_clk, + [RPM_SMD_CE1_CLK] = &msm8998_ce1_clk, + [RPM_SMD_CE1_A_CLK] = &msm8998_ce1_a_clk, + [RPM_SMD_DIV_CLK1] = &msm8998_div_clk1, + [RPM_SMD_DIV_A_CLK1] = &msm8998_div_clk1_a, + [RPM_SMD_IPA_CLK] = &msm8998_ipa_clk, + [RPM_SMD_IPA_A_CLK] = &msm8998_ipa_a_clk, + [RPM_SMD_BB_CLK1] = &msm8998_bb_clk1, + [RPM_SMD_BB_CLK1_A] = &msm8998_bb_clk1_a, + [RPM_SMD_BB_CLK2] = &msm8998_bb_clk2, + [RPM_SMD_BB_CLK2_A] = &msm8998_bb_clk2_a, + [RPM_SMD_BB_CLK3_PIN] = &msm8998_bb_clk3_pin, + [RPM_SMD_BB_CLK3_A_PIN] = &msm8998_bb_clk3_a_pin, + [RPM_SMD_MMAXI_CLK] = &msm8998_mmssnoc_axi_rpm_clk, + [RPM_SMD_MMAXI_A_CLK] = &msm8998_mmssnoc_axi_rpm_a_clk, + [RPM_SMD_AGGR1_NOC_CLK] = &msm8998_aggre1_noc_clk, + [RPM_SMD_AGGR1_NOC_A_CLK] = &msm8998_aggre1_noc_a_clk, + [RPM_SMD_AGGR2_NOC_CLK] = &msm8998_aggre2_noc_clk, + [RPM_SMD_AGGR2_NOC_A_CLK] = &msm8998_aggre2_noc_a_clk, + [RPM_SMD_RF_CLK1] = &msm8998_rf_clk1, + [RPM_SMD_RF_CLK1_A] = &msm8998_rf_clk1_a, + [RPM_SMD_RF_CLK2_PIN] = &msm8998_rf_clk2_pin, + [RPM_SMD_RF_CLK2_A_PIN] = &msm8998_rf_clk2_a_pin, + [RPM_SMD_RF_CLK3] = &msm8998_rf_clk3, + [RPM_SMD_RF_CLK3_A] = &msm8998_rf_clk3_a, + [RPM_SMD_RF_CLK3_PIN] = &msm8998_rf_clk3_pin, + [RPM_SMD_RF_CLK3_A_PIN] = &msm8998_rf_clk3_a_pin, +}; + +static const struct rpm_smd_clk_desc rpm_clk_msm8998 = { + .clks = msm8998_clks, + .num_clks = ARRAY_SIZE(msm8998_clks), +}; + static const struct of_device_id rpm_smd_clk_match_table[] = { { .compatible = "qcom,rpmcc-msm8916", .data = &rpm_clk_msm8916 }, { .compatible = "qcom,rpmcc-msm8974", .data = &rpm_clk_msm8974 }, { .compatible = "qcom,rpmcc-msm8996", .data = &rpm_clk_msm8996 }, + { .compatible = "qcom,rpmcc-msm8998", .data = &rpm_clk_msm8998 }, + { .compatible = "qcom,rpmcc-qcs404", .data = &rpm_clk_qcs404 }, { } }; MODULE_DEVICE_TABLE(of, rpm_smd_clk_match_table); diff --git a/drivers/clk/qcom/gcc-msm8998.c b/drivers/clk/qcom/gcc-msm8998.c index 9f0ae403d5f5..621f1a66ce86 100644 --- a/drivers/clk/qcom/gcc-msm8998.c +++ b/drivers/clk/qcom/gcc-msm8998.c @@ -117,6 +117,17 @@ static const char * const gcc_parent_names_5[] = { "core_bi_pll_test_se", }; +static struct clk_fixed_factor xo = { + .mult = 1, + .div = 1, + .hw.init = &(struct clk_init_data){ + .name = "xo", + .parent_names = (const char *[]){ "xo_board" }, + .num_parents = 1, + .ops = &clk_fixed_factor_ops, + }, +}; + static struct pll_vco fabia_vco[] = { { 250000000, 2000000000, 0 }, { 125000000, 1000000000, 1 }, @@ -1099,6 +1110,27 @@ static struct clk_rcg2 ufs_axi_clk_src = { }, }; +static const struct freq_tbl ftbl_ufs_unipro_core_clk_src[] = { + F(37500000, P_GPLL0_OUT_MAIN, 16, 0, 0), + F(75000000, P_GPLL0_OUT_MAIN, 8, 0, 0), + F(150000000, P_GPLL0_OUT_MAIN, 4, 0, 0), + { } +}; + +static struct clk_rcg2 ufs_unipro_core_clk_src = { + .cmd_rcgr = 0x76028, + .mnd_width = 0, + .hid_width = 5, + .parent_map = gcc_parent_map_1, + .freq_tbl = ftbl_ufs_unipro_core_clk_src, + .clkr.hw.init = &(struct clk_init_data){ + .name = "ufs_unipro_core_clk_src", + .parent_names = gcc_parent_names_1, + .num_parents = 3, + .ops = &clk_rcg2_ops, + }, +}; + static const struct freq_tbl ftbl_usb30_master_clk_src[] = { F(19200000, P_XO, 1, 0, 0), F(120000000, P_GPLL0_OUT_MAIN, 5, 0, 0), @@ -1884,7 +1916,7 @@ static struct clk_branch gcc_gp3_clk = { static struct clk_branch gcc_gpu_bimc_gfx_clk = { .halt_reg = 0x71010, - .halt_check = BRANCH_HALT, + .halt_check = BRANCH_HALT_SKIP, .clkr = { .enable_reg = 0x71010, .enable_mask = BIT(0), @@ -1972,6 +2004,7 @@ static struct clk_branch gcc_hmss_dvm_bus_clk = { .enable_mask = BIT(0), .hw.init = &(struct clk_init_data){ .name = "gcc_hmss_dvm_bus_clk", + .flags = CLK_IS_CRITICAL, .ops = &clk_branch2_ops, }, }, @@ -2015,6 +2048,7 @@ static struct clk_branch gcc_lpass_at_clk = { .enable_mask = BIT(0), .hw.init = &(struct clk_init_data){ .name = "gcc_lpass_at_clk", + .flags = CLK_IS_CRITICAL, .ops = &clk_branch2_ops, }, }, @@ -2401,7 +2435,7 @@ static struct clk_branch gcc_ufs_phy_aux_clk = { static struct clk_branch gcc_ufs_rx_symbol_0_clk = { .halt_reg = 0x75014, - .halt_check = BRANCH_HALT, + .halt_check = BRANCH_HALT_SKIP, .clkr = { .enable_reg = 0x75014, .enable_mask = BIT(0), @@ -2414,7 +2448,7 @@ static struct clk_branch gcc_ufs_rx_symbol_0_clk = { static struct clk_branch gcc_ufs_rx_symbol_1_clk = { .halt_reg = 0x7605c, - .halt_check = BRANCH_HALT, + .halt_check = BRANCH_HALT_SKIP, .clkr = { .enable_reg = 0x7605c, .enable_mask = BIT(0), @@ -2427,7 +2461,7 @@ static struct clk_branch gcc_ufs_rx_symbol_1_clk = { static struct clk_branch gcc_ufs_tx_symbol_0_clk = { .halt_reg = 0x75010, - .halt_check = BRANCH_HALT, + .halt_check = BRANCH_HALT_SKIP, .clkr = { .enable_reg = 0x75010, .enable_mask = BIT(0), @@ -2438,6 +2472,8 @@ static struct clk_branch gcc_ufs_tx_symbol_0_clk = { }, }; +static const char *foo[] = { "ufs_unipro_core_clk_src" }; + static struct clk_branch gcc_ufs_unipro_core_clk = { .halt_reg = 0x76008, .halt_check = BRANCH_HALT, @@ -2446,6 +2482,8 @@ static struct clk_branch gcc_ufs_unipro_core_clk = { .enable_mask = BIT(0), .hw.init = &(struct clk_init_data){ .name = "gcc_ufs_unipro_core_clk", + .parent_names = foo, + .num_parents = 1, .ops = &clk_branch2_ops, }, }, @@ -2541,6 +2579,76 @@ static struct clk_branch gcc_usb_phy_cfg_ahb2phy_clk = { }, }; +static struct clk_branch gcc_hdmi_clkref_clk = { + .halt_reg = 0x88000, + .clkr = { + .enable_reg = 0x88000, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_hdmi_clkref_clk", + .parent_names = (const char *[]){ "xo" }, + .num_parents = 1, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_ufs_clkref_clk = { + .halt_reg = 0x88004, + .clkr = { + .enable_reg = 0x88004, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ufs_clkref_clk", + .parent_names = (const char *[]){ "xo" }, + .num_parents = 1, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_usb3_clkref_clk = { + .halt_reg = 0x88008, + .clkr = { + .enable_reg = 0x88008, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb3_clkref_clk", + .parent_names = (const char *[]){ "xo" }, + .num_parents = 1, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pcie_clkref_clk = { + .halt_reg = 0x8800c, + .clkr = { + .enable_reg = 0x8800c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie_clkref_clk", + .parent_names = (const char *[]){ "xo" }, + .num_parents = 1, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_rx1_usb2_clkref_clk = { + .halt_reg = 0x88014, + .clkr = { + .enable_reg = 0x88014, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_rx1_usb2_clkref_clk", + .parent_names = (const char *[]){ "xo" }, + .num_parents = 1, + .ops = &clk_branch2_ops, + }, + }, +}; + static struct gdsc pcie_0_gdsc = { .gdscr = 0x6b004, .gds_hw_ctrl = 0x0, @@ -2688,6 +2796,7 @@ static struct clk_regmap *gcc_msm8998_clocks[] = { [GCC_UFS_RX_SYMBOL_1_CLK] = &gcc_ufs_rx_symbol_1_clk.clkr, [GCC_UFS_TX_SYMBOL_0_CLK] = &gcc_ufs_tx_symbol_0_clk.clkr, [GCC_UFS_UNIPRO_CORE_CLK] = &gcc_ufs_unipro_core_clk.clkr, + [UFS_UNIPRO_CORE_CLK_SRC] = &ufs_unipro_core_clk_src.clkr, [GCC_USB30_MASTER_CLK] = &gcc_usb30_master_clk.clkr, [GCC_USB30_MOCK_UTMI_CLK] = &gcc_usb30_mock_utmi_clk.clkr, [GCC_USB30_SLEEP_CLK] = &gcc_usb30_sleep_clk.clkr, @@ -2733,6 +2842,11 @@ static struct clk_regmap *gcc_msm8998_clocks[] = { [USB30_MASTER_CLK_SRC] = &usb30_master_clk_src.clkr, [USB30_MOCK_UTMI_CLK_SRC] = &usb30_mock_utmi_clk_src.clkr, [USB3_PHY_AUX_CLK_SRC] = &usb3_phy_aux_clk_src.clkr, + [GCC_HDMI_CLKREF_CLK] = &gcc_hdmi_clkref_clk.clkr, + [GCC_UFS_CLKREF_CLK] = &gcc_ufs_clkref_clk.clkr, + [GCC_USB3_CLKREF_CLK] = &gcc_usb3_clkref_clk.clkr, + [GCC_PCIE_CLKREF_CLK] = &gcc_pcie_clkref_clk.clkr, + [GCC_RX1_USB2_CLKREF_CLK] = &gcc_rx1_usb2_clkref_clk.clkr, }; static struct gdsc *gcc_msm8998_gdscs[] = { @@ -2742,25 +2856,25 @@ static struct gdsc *gcc_msm8998_gdscs[] = { }; static const struct qcom_reset_map gcc_msm8998_resets[] = { - [GCC_BLSP1_QUP1_BCR] = { 0x102400 }, - [GCC_BLSP1_QUP2_BCR] = { 0x110592 }, - [GCC_BLSP1_QUP3_BCR] = { 0x118784 }, - [GCC_BLSP1_QUP4_BCR] = { 0x126976 }, - [GCC_BLSP1_QUP5_BCR] = { 0x135168 }, - [GCC_BLSP1_QUP6_BCR] = { 0x143360 }, - [GCC_BLSP2_QUP1_BCR] = { 0x155648 }, - [GCC_BLSP2_QUP2_BCR] = { 0x163840 }, - [GCC_BLSP2_QUP3_BCR] = { 0x172032 }, - [GCC_BLSP2_QUP4_BCR] = { 0x180224 }, - [GCC_BLSP2_QUP5_BCR] = { 0x188416 }, - [GCC_BLSP2_QUP6_BCR] = { 0x196608 }, - [GCC_PCIE_0_BCR] = { 0x438272 }, - [GCC_PDM_BCR] = { 0x208896 }, - [GCC_SDCC2_BCR] = { 0x81920 }, - [GCC_SDCC4_BCR] = { 0x90112 }, - [GCC_TSIF_BCR] = { 0x221184 }, - [GCC_UFS_BCR] = { 0x479232 }, - [GCC_USB_30_BCR] = { 0x61440 }, + [GCC_BLSP1_QUP1_BCR] = { 0x19000 }, + [GCC_BLSP1_QUP2_BCR] = { 0x1b000 }, + [GCC_BLSP1_QUP3_BCR] = { 0x1d000 }, + [GCC_BLSP1_QUP4_BCR] = { 0x1f000 }, + [GCC_BLSP1_QUP5_BCR] = { 0x21000 }, + [GCC_BLSP1_QUP6_BCR] = { 0x23000 }, + [GCC_BLSP2_QUP1_BCR] = { 0x26000 }, + [GCC_BLSP2_QUP2_BCR] = { 0x28000 }, + [GCC_BLSP2_QUP3_BCR] = { 0x2a000 }, + [GCC_BLSP2_QUP4_BCR] = { 0x2c000 }, + [GCC_BLSP2_QUP5_BCR] = { 0x2e000 }, + [GCC_BLSP2_QUP6_BCR] = { 0x30000 }, + [GCC_PCIE_0_BCR] = { 0x6b000 }, + [GCC_PDM_BCR] = { 0x33000 }, + [GCC_SDCC2_BCR] = { 0x14000 }, + [GCC_SDCC4_BCR] = { 0x16000 }, + [GCC_TSIF_BCR] = { 0x36000 }, + [GCC_UFS_BCR] = { 0x75000 }, + [GCC_USB_30_BCR] = { 0xf000 }, }; static const struct regmap_config gcc_msm8998_regmap_config = { @@ -2798,6 +2912,10 @@ static int gcc_msm8998_probe(struct platform_device *pdev) if (ret) return ret; + ret = devm_clk_hw_register(&pdev->dev, &xo.hw); + if (ret) + return ret; + return qcom_cc_really_probe(pdev, &gcc_msm8998_desc, regmap); } diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c index a83332411026..7fd9dae0d24f 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c @@ -72,6 +72,9 @@ #define MAX_PROP_NAME 32 +/* Define the assumed distance between lanes for underspecified device trees. */ +#define QMP_PHY_LEGACY_LANE_STRIDE 0x400 + struct qmp_phy_init_tbl { unsigned int offset; unsigned int val; @@ -390,7 +393,7 @@ static const struct qmp_phy_init_tbl ipq8074_pcie_pcs_tbl[] = { }; static const struct qmp_phy_init_tbl qmp_v3_usb3_serdes_tbl[] = { - QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x0f), QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x14), QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x08), QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30), @@ -650,8 +653,8 @@ static const struct qmp_phy_init_tbl sdm845_ufsphy_serdes_tbl[] = { static const struct qmp_phy_init_tbl sdm845_ufsphy_tx_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x06), - QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x04), - QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x07), + //QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x04), + //QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x07), }; static const struct qmp_phy_init_tbl sdm845_ufsphy_rx_tbl[] = { @@ -663,14 +666,14 @@ static const struct qmp_phy_init_tbl sdm845_ufsphy_rx_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_TERM_BW, 0x5b), QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x06), QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04), - QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1b), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1d), QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN_HALF, 0x04), QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN_QUARTER, 0x04), QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN, 0x04), QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b), QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x81), QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x80), - QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x59), + //QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x59), }; static const struct qmp_phy_init_tbl sdm845_ufsphy_pcs_tbl[] = { @@ -733,9 +736,6 @@ struct qmp_phy_cfg { bool has_phy_dp_com_ctrl; /* true, if PHY has secondary tx/rx lanes to be configured */ bool is_dual_lane_phy; - /* Register offset of secondary tx/rx lanes for USB DP combo PHY */ - unsigned int tx_b_lane_offset; - unsigned int rx_b_lane_offset; /* true, if PCS block has no separate SW_RESET register */ bool no_pcs_sw_reset; @@ -748,6 +748,8 @@ struct qmp_phy_cfg { * @tx: iomapped memory space for lane's tx * @rx: iomapped memory space for lane's rx * @pcs: iomapped memory space for lane's pcs + * @tx2: iomapped memory space for second lane's tx (in dual lane PHYs) + * @rx2: iomapped memory space for second lane's rx (in dual lane PHYs) * @pcs_misc: iomapped memory space for lane's pcs_misc * @pipe_clk: pipe lock * @index: lane index @@ -759,6 +761,8 @@ struct qmp_phy { void __iomem *tx; void __iomem *rx; void __iomem *pcs; + void __iomem *tx2; + void __iomem *rx2; void __iomem *pcs_misc; struct clk *pipe_clk; unsigned int index; @@ -975,8 +979,6 @@ static const struct qmp_phy_cfg qmp_v3_usb3phy_cfg = { .has_phy_dp_com_ctrl = true, .is_dual_lane_phy = true, - .tx_b_lane_offset = 0x400, - .rx_b_lane_offset = 0x400, }; static const struct qmp_phy_cfg qmp_v3_usb3_uniphy_cfg = { @@ -1031,9 +1033,6 @@ static const struct qmp_phy_cfg sdm845_ufsphy_cfg = { .mask_pcs_ready = PCS_READY, .is_dual_lane_phy = true, - .tx_b_lane_offset = 0x400, - .rx_b_lane_offset = 0x400, - .no_pcs_sw_reset = true, }; @@ -1238,12 +1237,12 @@ static int qcom_qmp_phy_init(struct phy *phy) qcom_qmp_phy_configure(tx, cfg->regs, cfg->tx_tbl, cfg->tx_tbl_num); /* Configuration for other LANE for USB-DP combo PHY */ if (cfg->is_dual_lane_phy) - qcom_qmp_phy_configure(tx + cfg->tx_b_lane_offset, cfg->regs, + qcom_qmp_phy_configure(qphy->tx2, cfg->regs, cfg->tx_tbl, cfg->tx_tbl_num); qcom_qmp_phy_configure(rx, cfg->regs, cfg->rx_tbl, cfg->rx_tbl_num); if (cfg->is_dual_lane_phy) - qcom_qmp_phy_configure(rx + cfg->rx_b_lane_offset, cfg->regs, + qcom_qmp_phy_configure(qphy->rx2, cfg->regs, cfg->rx_tbl, cfg->rx_tbl_num); qcom_qmp_phy_configure(pcs, cfg->regs, cfg->pcs_tbl, cfg->pcs_tbl_num); @@ -1614,8 +1613,9 @@ int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id) /* * Get memory resources for each phy lane: - * Resources are indexed as: tx -> 0; rx -> 1; pcs -> 2; and - * pcs_misc (optional) -> 3. + * Resources are indexed as: tx -> 0; rx -> 1; pcs -> 2. + * For dual lane PHYs: tx2 -> 3, rx2 -> 4, pcs_misc (optional) -> 5 + * For single lane PHYs: pcs_misc (optional) -> 3. */ qphy->tx = of_iomap(np, 0); if (!qphy->tx) @@ -1629,7 +1629,32 @@ int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id) if (!qphy->pcs) return -ENOMEM; - qphy->pcs_misc = of_iomap(np, 3); + /* + * If this is a dual-lane PHY, then there should be registers for the + * second lane. Some old device trees did not specify this, so fall + * back to old legacy behavior of assuming they can be reached at an + * offset from the first lane. + */ + if (qmp->cfg->is_dual_lane_phy) { + qphy->tx2 = of_iomap(np, 3); + qphy->rx2 = of_iomap(np, 4); + if (!qphy->tx2 || !qphy->rx2) { + dev_warn(dev, + "Underspecified device tree, falling back to legacy register regions\n"); + + /* In the old version, pcs_misc is at index 3. */ + qphy->pcs_misc = qphy->tx2; + qphy->tx2 = qphy->tx + QMP_PHY_LEGACY_LANE_STRIDE; + qphy->rx2 = qphy->rx + QMP_PHY_LEGACY_LANE_STRIDE; + + } else { + qphy->pcs_misc = of_iomap(np, 5); + } + + } else { + qphy->pcs_misc = of_iomap(np, 3); + } + if (!qphy->pcs_misc) dev_vdbg(dev, "PHY pcs_misc-reg not used\n"); diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c index 3aeadb14aae1..dc60f4032d81 100644 --- a/drivers/scsi/ufs/ufs-qcom.c +++ b/drivers/scsi/ufs/ufs-qcom.c @@ -12,6 +12,7 @@ * */ +#define DEBUG #include <linux/time.h> #include <linux/of.h> #include <linux/platform_device.h> @@ -267,6 +268,7 @@ static int ufs_qcom_power_up_sequence(struct ufs_hba *hba) __func__, ret); goto out; } + host->is_phy_init = true; /* De-assert PHY reset and start serdes */ ufs_qcom_deassert_reset(hba); @@ -595,6 +597,35 @@ static int ufs_qcom_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op) return err; } +static int ufs_qcom_core_reset(struct ufs_hba *hba) +{ + int ret = -ENOTSUPP; + + if (!hba->core_reset) { + dev_err(hba->dev, "%s: failed, err = %d\n", __func__, + ret); + goto out; + } + + ret = reset_control_assert(hba->core_reset); + if (ret) { + dev_err(hba->dev, "core_reset assert failed, err = %d\n", + ret); + goto out; + } + + /* As per spec, delay is required to let reset assert go through */ + usleep_range(1, 2); + + ret = reset_control_deassert(hba->core_reset); + if (ret) + dev_err(hba->dev, "core_reset deassert failed, err = %d\n", + ret); + +out: + return ret; +} + struct ufs_qcom_dev_params { u32 pwm_rx_gear; /* pwm rx gear to work in */ u32 pwm_tx_gear; /* pwm tx gear to work in */ @@ -1118,7 +1149,8 @@ static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on, return 0; if (on && (status == POST_CHANGE)) { - phy_power_on(host->generic_phy); + if (host->is_phy_init) + phy_power_on(host->generic_phy); /* enable the device ref clock for HS mode*/ if (ufshcd_is_hs_mode(&hba->pwr_info)) @@ -1637,6 +1669,7 @@ static struct ufs_hba_variant_ops ufs_hba_qcom_vops = { .apply_dev_quirks = ufs_qcom_apply_dev_quirks, .suspend = ufs_qcom_suspend, .resume = ufs_qcom_resume, + .core_reset = ufs_qcom_core_reset, .dbg_register_dump = ufs_qcom_dump_dbg_regs, }; diff --git a/drivers/scsi/ufs/ufs-qcom.h b/drivers/scsi/ufs/ufs-qcom.h index c114826316eb..540c1d84794d 100644 --- a/drivers/scsi/ufs/ufs-qcom.h +++ b/drivers/scsi/ufs/ufs-qcom.h @@ -237,6 +237,7 @@ struct ufs_qcom_host { /* Bitmask for enabling debug prints */ u32 dbg_print_en; struct ufs_qcom_testbus testbus; + bool is_phy_init; }; static inline u32 diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.c b/drivers/scsi/ufs/ufshcd-pltfrm.c index 895a9b5ac989..1ad931101bc3 100644 --- a/drivers/scsi/ufs/ufshcd-pltfrm.c +++ b/drivers/scsi/ufs/ufshcd-pltfrm.c @@ -36,12 +36,29 @@ #include <linux/platform_device.h> #include <linux/pm_runtime.h> #include <linux/of.h> +#include <linux/pinctrl/consumer.h> #include "ufshcd.h" #include "ufshcd-pltfrm.h" #define UFSHCD_DEFAULT_LANES_PER_DIRECTION 2 +static int ufshcd_parse_reset_info(struct ufs_hba *hba) +{ + int ret = 0; + + hba->core_reset = devm_reset_control_get_optional_exclusive(hba->dev, + "rst"); + if (IS_ERR(hba->core_reset)) { + ret = PTR_ERR(hba->core_reset); + dev_err(hba->dev, "core_reset unavailable,err = %d\n", + ret); + hba->core_reset = NULL; + } + + return ret; +} + static int ufshcd_parse_clock_info(struct ufs_hba *hba) { int ret = 0; @@ -221,6 +238,21 @@ static int ufshcd_parse_regulator_info(struct ufs_hba *hba) return err; } +static int ufshcd_parse_pinctrl_info(struct ufs_hba *hba) +{ + int ret = 0; + + /* Try to obtain pinctrl handle */ + hba->pctrl = devm_pinctrl_get(hba->dev); + if (IS_ERR(hba->pctrl)) { + ret = PTR_ERR(hba->pctrl); + hba->pctrl = NULL; + } + + printk("MYDEBUG: %s=%d\n", __func__, ret); + return ret; +} + #ifdef CONFIG_PM /** * ufshcd_pltfrm_suspend - suspend power management function @@ -340,6 +372,19 @@ int ufshcd_pltfrm_init(struct platform_device *pdev, goto dealloc_host; } + err = ufshcd_parse_reset_info(hba); + if (err) { + dev_err(&pdev->dev, "%s: reset parse failed %d\n", + __func__, err); + } + + err = ufshcd_parse_pinctrl_info(hba); + if (err) { + dev_err(&pdev->dev, "%s: unable to parse pinctrl data %d\n", + __func__, err); + /* let's not fail the probe */ + } + pm_runtime_set_active(&pdev->dev); pm_runtime_enable(&pdev->dev); diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index f1c57cd33b5b..320bbd9849bc 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -37,6 +37,8 @@ * license terms, and distributes only under these terms. */ +#define DEBUG +#include <linux/pinctrl/consumer.h> #include <linux/async.h> #include <linux/devfreq.h> #include <linux/nls.h> @@ -110,13 +112,19 @@ int ufshcd_dump_regs(struct ufs_hba *hba, size_t offset, size_t len, const char *prefix) { - u8 *regs; + u32 *regs; + size_t pos; + + if (offset % 4 != 0 || len % 4 != 0) /* keep readl happy */ + return -EINVAL; regs = kzalloc(len, GFP_KERNEL); if (!regs) return -ENOMEM; - memcpy_fromio(regs, hba->mmio_base + offset, len); + for (pos = 0; pos < len; pos += 4) + regs[pos / 4] = ufshcd_readl(hba, offset + pos); + ufshcd_hex_dump(prefix, regs, len); kfree(regs); @@ -2585,6 +2593,7 @@ static int ufshcd_wait_for_dev_cmd(struct ufs_hba *hba, time_left = wait_for_completion_timeout(hba->dev_cmd.complete, msecs_to_jiffies(max_timeout)); + printk("%s: time_left=%lu\n", __func__, time_left); /* Make sure descriptors are ready before ringing the doorbell */ wmb(); @@ -2698,6 +2707,7 @@ static int ufshcd_exec_dev_cmd(struct ufs_hba *hba, spin_unlock_irqrestore(hba->host->host_lock, flags); err = ufshcd_wait_for_dev_cmd(hba, lrbp, timeout); + printk("%s = %d\n", "ufshcd_wait_for_dev_cmd", err); ufshcd_add_query_upiu_trace(hba, tag, err ? "query_complete_err" : "query_complete"); @@ -3813,6 +3823,15 @@ static int ufshcd_link_recovery(struct ufs_hba *hba) ufshcd_set_eh_in_progress(hba); spin_unlock_irqrestore(hba->host->host_lock, flags); + if (hba->core_reset) { + ret = ufshcd_vops_core_reset(hba); + if (ret) + dev_err(hba->dev, + "full reset returned %d, trying to recover the link\n", + ret); + return ret; + } + ret = ufshcd_host_reset_and_restore(hba); spin_lock_irqsave(hba->host->host_lock, flags); @@ -7252,6 +7271,7 @@ static int ufshcd_init_clocks(struct ufs_hba *hba) goto out; } + printk("%s: %s max=%u\n", __func__, clki->name, clki->max_freq); if (clki->max_freq) { ret = clk_set_rate(clki->clk, clki->max_freq); if (ret) { @@ -8113,6 +8133,65 @@ int ufshcd_alloc_host(struct device *dev, struct ufs_hba **hba_handle) } EXPORT_SYMBOL(ufshcd_alloc_host); +static int ufshcd_device_reset_ctrl(struct ufs_hba *hba, bool ctrl) +{ + int ret = 0; + + if (!hba->pctrl) + return 0; + + /* Assert reset if ctrl == true */ + if (ctrl) + ret = pinctrl_select_state(hba->pctrl, + pinctrl_lookup_state(hba->pctrl, "dev-reset-assert")); + else + ret = pinctrl_select_state(hba->pctrl, + pinctrl_lookup_state(hba->pctrl, "dev-reset-deassert")); + + if (ret < 0) + dev_err(hba->dev, "%s: %s failed with err %d\n", + __func__, ctrl ? "Assert" : "Deassert", ret); + + return ret; +} + +static inline int ufshcd_assert_device_reset(struct ufs_hba *hba) +{ + printk("MYDEBUG: %s\n", __func__); + return ufshcd_device_reset_ctrl(hba, true); +} + +static inline int ufshcd_deassert_device_reset(struct ufs_hba *hba) +{ + printk("MYDEBUG: %s\n", __func__); + return ufshcd_device_reset_ctrl(hba, false); +} + +static int ufshcd_reset_device(struct ufs_hba *hba) +{ + int ret; + + /* reset the connected UFS device */ + ret = ufshcd_assert_device_reset(hba); + if (ret) + goto out; + /* + * The reset signal is active low. + * The UFS device shall detect more than or equal to 1us of positive + * or negative RST_n pulse width. + * To be on safe side, keep the reset low for atleast 10us. + */ + usleep_range(10, 15); + + ret = ufshcd_deassert_device_reset(hba); + if (ret) + goto out; + /* same as assert, wait for atleast 10us after deassert */ + usleep_range(10, 15); +out: + return ret; +} + /** * ufshcd_init - Driver initialization routine * @hba: per-adapter instance @@ -8237,6 +8316,16 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq) goto exit_gating; } + /* Reset controller to power on reset (POR) state */ + if (hba->core_reset) + ufshcd_vops_core_reset(hba); + + /* reset connected UFS device */ + err = ufshcd_reset_device(hba); + if (err) + dev_warn(hba->dev, "%s: device reset failed. err %d\n", + __func__, err); + /* Host controller enable */ err = ufshcd_hba_enable(hba); if (err) { diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h index 1a1c2b487a4e..fb1c25cf33c0 100644 --- a/drivers/scsi/ufs/ufshcd.h +++ b/drivers/scsi/ufs/ufshcd.h @@ -55,6 +55,7 @@ #include <linux/clk.h> #include <linux/completion.h> #include <linux/regulator/consumer.h> +#include <linux/reset.h> #include "unipro.h" #include <asm/irq.h> @@ -296,6 +297,8 @@ struct ufs_pwr_mode_info { * @apply_dev_quirks: called to apply device specific quirks * @suspend: called during host controller PM callback * @resume: called during host controller PM callback + * @core_reset: called before UFS PHY init and during link recovery for + * handling variant specific implementations of resetting the hci * @dbg_register_dump: used to dump controller debug information * @phy_initialization: used to initialize phys */ @@ -324,6 +327,7 @@ struct ufs_hba_variant_ops { int (*apply_dev_quirks)(struct ufs_hba *); int (*suspend)(struct ufs_hba *, enum ufs_pm_op); int (*resume)(struct ufs_hba *, enum ufs_pm_op); + int (*core_reset)(struct ufs_hba *); void (*dbg_register_dump)(struct ufs_hba *hba); int (*phy_initialization)(struct ufs_hba *); }; @@ -700,11 +704,13 @@ struct ufs_hba { bool is_urgent_bkops_lvl_checked; struct rw_semaphore clk_scaling_lock; + struct reset_control *core_reset; struct ufs_desc_size desc_size; atomic_t scsi_block_reqs_cnt; struct device bsg_dev; struct request_queue *bsg_queue; + struct pinctrl *pctrl; }; /* Returns true if clocks can be gated. Otherwise false */ @@ -1032,6 +1038,13 @@ static inline int ufshcd_vops_resume(struct ufs_hba *hba, enum ufs_pm_op op) return 0; } +static inline int ufshcd_vops_core_reset(struct ufs_hba *hba) +{ + if (hba->vops && hba->vops->core_reset) + return hba->vops->core_reset(hba); + return 0; +} + static inline void ufshcd_vops_dbg_register_dump(struct ufs_hba *hba) { if (hba->vops && hba->vops->dbg_register_dump) diff --git a/include/dt-bindings/clock/qcom,gcc-msm8998.h b/include/dt-bindings/clock/qcom,gcc-msm8998.h index 58a242e656b1..7cdbff00b9a0 100644 --- a/include/dt-bindings/clock/qcom,gcc-msm8998.h +++ b/include/dt-bindings/clock/qcom,gcc-msm8998.h @@ -180,6 +180,12 @@ #define USB30_MASTER_CLK_SRC 163 #define USB30_MOCK_UTMI_CLK_SRC 164 #define USB3_PHY_AUX_CLK_SRC 165 +#define GCC_USB3_CLKREF_CLK 166 +#define GCC_HDMI_CLKREF_CLK 167 +#define GCC_UFS_CLKREF_CLK 168 +#define GCC_PCIE_CLKREF_CLK 169 +#define GCC_RX1_USB2_CLKREF_CLK 170 +#define UFS_UNIPRO_CORE_CLK_SRC 171 #define PCIE_0_GDSC 0 #define UFS_GDSC 1 diff --git a/include/dt-bindings/clock/qcom,rpmcc.h b/include/dt-bindings/clock/qcom,rpmcc.h index c585b82b9c05..81dbd1f07e36 100644 --- a/include/dt-bindings/clock/qcom,rpmcc.h +++ b/include/dt-bindings/clock/qcom,rpmcc.h @@ -123,5 +123,15 @@ #define RPM_SMD_DIV_A_CLK3 73 #define RPM_SMD_LN_BB_CLK 74 #define RPM_SMD_LN_BB_A_CLK 75 +#define RPM_SMD_BIMC_GPU_CLK 76 +#define RPM_SMD_BIMC_GPU_A_CLK 77 +#define RPM_SMD_QPIC_CLK 78 +#define RPM_SMD_QPIC_CLK_A 79 +#define RPM_SMD_BB_CLK3_PIN 80 +#define RPM_SMD_BB_CLK3_A_PIN 81 +#define RPM_SMD_RF_CLK3 82 +#define RPM_SMD_RF_CLK3_A 83 +#define RPM_SMD_RF_CLK3_PIN 84 +#define RPM_SMD_RF_CLK3_A_PIN 85 #endif
On 12/12/2018 18:34, Marc Gonzalez wrote: > On 03/12/2018 16:18, Marc Gonzalez wrote: > >> I'm trying to enable UFS on apq8098. Just wanted to share my progress >> so far, in case someone spots any glaring mistakes. > > I feel I'm close, but I'm still missing something. Full boot log and > complete diff provided below, for reference. > > I'm open to suggestions :-) I'll try doing an auto-review, looking for anything suspicious. > (Maybe I went overboard with the defconfig changes, I'll try reverting > to the default one.) Same issue with the default defconfig, so probably not relevant. > [ 0.000000] ITS: No ITS available, not enabling LPIs Could it be that LPIs are required for the UFS HW block? (I doubt it.) > LPIs are typically used for peripherals that produce message-based > interrupts. An LPI targets only one core at a given time. LPIs are > generated when the peripheral writes to the ITS, which also holds the > registers to control the generation and maintenance of LPIs. The ITS > provides interrupt ID translation, allowing peripherals to be owned > directly by a virtual machine if a System MMU is also present for > those peripherals. > [ 0.317814] s1: supplied by vph_pwr > [ 0.318299] s2: supplied by vph_pwr > [ 0.318548] s3: supplied by vph_pwr > [ 0.318613] s3: Bringing 0uV into 1352000-1352000uV > [ 0.319113] s4: supplied by vph_pwr > [ 0.319172] s4: Bringing 0uV into 1800000-1800000uV > [ 0.319463] s5: supplied by vph_pwr > [ 0.319511] s5: Bringing 0uV into 1904000-1904000uV > [ 0.319827] s6: supplied by vph_pwr > [ 0.320150] s7: supplied by vph_pwr > [ 0.320198] s7: Bringing 0uV into 900000-900000uV > [ 0.320426] s8: supplied by vph_pwr > [ 0.320690] s9: supplied by vph_pwr > [ 0.320912] s10: supplied by vph_pwr > [ 0.321197] s11: supplied by vph_pwr > [ 0.321401] s12: supplied by vph_pwr > [ 0.321611] s13: supplied by vph_pwr > [ 0.321931] l1: supplied by s7 > [ 0.321985] l1: Bringing 0uV into 880000-880000uV > [ 0.322228] l2: supplied by s3 > [ 0.322277] l2: Bringing 0uV into 1200000-1200000uV > [ 0.322516] l3: supplied by s7 > [ 0.322652] l3: Bringing 0uV into 1000000-1000000uV > [ 0.322922] l4: supplied by s7 > [ 0.323107] l5: supplied by s7 > [ 0.323161] l5: Bringing 0uV into 800000-800000uV > [ 0.323440] l6: supplied by s5 > [ 0.323591] l6: Bringing 0uV into 1808000-1808000uV > [ 0.323884] l7: supplied by s5 > [ 0.323931] l7: Bringing 0uV into 1800000-1800000uV > [ 0.324210] l8: supplied by s3 > [ 0.324254] l8: Bringing 0uV into 1200000-1200000uV > [ 0.324514] l9: Bringing 0uV into 1808000-1808000uV > [ 0.324897] l10: Bringing 0uV into 1808000-1808000uV > [ 0.325302] l11: supplied by s7 > [ 0.325360] l11: Bringing 0uV into 1000000-1000000uV > [ 0.325640] l12: supplied by s5 > [ 0.325709] l12: Bringing 0uV into 1800000-1800000uV > [ 0.325982] l13: Bringing 0uV into 1808000-1808000uV > [ 0.326310] l14: supplied by s5 > [ 0.326449] l14: Bringing 0uV into 1880000-1880000uV > [ 0.326738] l15: supplied by s5 > [ 0.326792] l15: Bringing 0uV into 1800000-1800000uV > [ 0.327078] l16: Bringing 0uV into 2704000-2704000uV > [ 0.327375] l17: supplied by s3 > [ 0.327447] l17: Bringing 0uV into 1304000-1304000uV > [ 0.327858] l18: Bringing 0uV into 2704000-2704000uV > [ 0.328191] l19: Bringing 0uV into 3008000-3008000uV > [ 0.328497] l20: Bringing 0uV into 2960000-2960000uV > [ 0.328934] l21: Bringing 0uV into 2960000-2960000uV > [ 0.329293] l22: Bringing 0uV into 2864000-2864000uV > [ 0.329638] l23: Bringing 0uV into 3312000-3312000uV > [ 0.329989] l24: Bringing 0uV into 3088000-3088000uV > [ 0.330502] l25: Bringing 0uV into 3104000-3104000uV > [ 0.330949] l26: supplied by s3 > [ 0.331004] l26: Bringing 0uV into 1200000-1200000uV > [ 0.331404] l27: supplied by s7 > [ 0.331748] l28: Bringing 0uV into 3008000-3008000uV > [ 0.332157] lvs1: supplied by s4 > [ 0.333678] lvs2: supplied by s4 > [ 0.334967] bob: supplied by vph_pwr > [ 0.335041] bob: Bringing 0uV into 3312000-3312000uV AFAICT, UFS (HC+PHY) requires l20, l26, s4 + l1, l2 It doesn't say 'supplied by X' for l20. Might be an issue... > [ 0.954299] qcom-qmp-phy 1da7000.phy: Linked as a consumer to regulator.15 > [ 0.954431] qcom-qmp-phy 1da7000.phy: Linked as a consumer to regulator.16 > [ 0.955131] qcom-qmp-phy 1da7000.phy: Registered Qcom-QMP phy AFAIU, this means the UFS PHY is working correctly, and has been initialized successfully (so clocks, regulators, ... everything checks out?) > [ 2.083564] ufshcd-qcom 1da4000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled Troubling, but same downstream. And <&gcc UFS_GDSC> should be enabled by power-domains = <&gcc UFS_GDSC>; (need to check) > [ 2.083793] MYDEBUG: ufshcd_parse_pinctrl_info=0 > [ 2.093295] ufshcd_init_clocks: core_clk max=200000000 > [ 2.098008] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: core_clk, rate: 198400000 > [ 2.102953] ufshcd_init_clocks: bus_aggr_clk max=0 > [ 2.111164] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: bus_aggr_clk, rate: 198400000 > [ 2.115881] ufshcd_init_clocks: iface_clk max=0 > [ 2.124443] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: iface_clk, rate: 0 Odd. > [ 2.128812] ufshcd_init_clocks: core_clk_unipro max=150000000 > [ 2.136439] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: core_clk_unipro, rate: 148800000 > [ 2.142280] ufshcd_init_clocks: core_clk_ice max=300000000 > [ 2.151106] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: core_clk_ice, rate: 0 > [ 2.156425] ufshcd_init_clocks: ref_clk max=0 > [ 2.164288] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: ref_clk, rate: 19200000 > [ 2.168661] ufshcd_init_clocks: tx_lane0_sync_clk max=0 > [ 2.176449] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: tx_lane0_sync_clk, rate: 0 > [ 2.181691] ufshcd_init_clocks: rx_lane0_sync_clk max=0 > [ 2.189988] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: rx_lane0_sync_clk, rate: 0 > [ 2.195135] ufshcd_init_clocks: rx_lane1_sync_clk max=0 > [ 2.203443] ufshcd-qcom 1da4000.ufshc: ufshcd_init_clocks: clk: rx_lane1_sync_clk, rate: 0 No tx1, odd. > [ 2.208761] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: core_clk enabled > [ 2.216923] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: bus_aggr_clk enabled > [ 2.224471] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: iface_clk enabled > [ 2.232457] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: core_clk_unipro enabled > [ 2.240441] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: core_clk_ice enabled > [ 2.248840] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: ref_clk enabled > [ 2.256426] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: tx_lane0_sync_clk enabled > [ 2.264064] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: rx_lane0_sync_clk enabled > [ 2.272654] ufshcd-qcom 1da4000.ufshc: __ufshcd_setup_clocks: clk: rx_lane1_sync_clk enabled > [ 2.281262] l20: supplied by bob Aha, here's the 'supplied by X' for l20. Could it be too late? (Unlikely) > [ 2.289650] ufshcd-qcom 1da4000.ufshc: Linked as a consumer to regulator.34 > [ 2.292778] ufshcd-qcom 1da4000.ufshc: Linked as a consumer to regulator.40 > [ 2.299441] ufshcd-qcom 1da4000.ufshc: Linked as a consumer to regulator.5 Need to check whether these regulators are enabled/functional. > [ 2.309977] scsi host0: ufshcd > [ 2.314021] MYDEBUG: ufshcd_assert_device_reset > [ 2.316332] MYDEBUG: ufshcd_deassert_device_reset OK, so the ufs_reset pin should be deasserted at this point. > [ 2.347478] ufshcd-qcom 1da4000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0 Same log downstream. > [ 2.348407] ufshcd_wait_for_dev_cmd: time_left=8 > [ 2.364079] ufshcd_wait_for_dev_cmd = 0 So the very first command succeeds (tag 31, same as the commands that fail below). > [ 3.872668] ufshcd_wait_for_dev_cmd: time_left=0 > [ 3.872757] ufshcd-qcom 1da4000.ufshc: ufshcd_wait_for_dev_cmd: dev_cmd request timedout, tag 31 > [ 3.876423] ufshcd_wait_for_dev_cmd = -11 > [ 3.885185] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag: Sending flag query for idn 1 failed, err = -11 > [ 3.889102] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag_retry: failed with error -11, retries 0 > [ 3.964264] ufshcd-qcom 1da4000.ufshc: ufshcd_update_uic_error: UIC error flags = 0x00000000 > [ 4.027895] ufshcd-qcom 1da4000.ufshc: ufshcd_update_uic_error: UIC error flags = 0x00000000 > [ 4.098358] ufshcd-qcom 1da4000.ufshc: ufshcd_update_uic_error: UIC error flags = 0x00000001 > [ 5.408617] ufshcd_wait_for_dev_cmd: time_left=0 > [ 5.408666] ufshcd-qcom 1da4000.ufshc: ufshcd_wait_for_dev_cmd: dev_cmd request timedout, tag 31 > [ 5.412355] ufshcd_wait_for_dev_cmd = -11 > [ 5.421097] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag: Sending flag query for idn 1 failed, err = -11 > [ 5.425042] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag_retry: failed with error -11, retries 1 > [ 6.944607] ufshcd_wait_for_dev_cmd: time_left=0 > [ 6.944657] ufshcd-qcom 1da4000.ufshc: ufshcd_wait_for_dev_cmd: dev_cmd request timedout, tag 31 > [ 6.948345] ufshcd_wait_for_dev_cmd = -11 > [ 6.957084] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag: Sending flag query for idn 1 failed, err = -11 > [ 6.961029] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag_retry: failed with error -11, retries 2 > [ 6.970576] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag_retry: query attribute, opcode 6, idn 1, failed with error -11 after 3 retires > [ 6.979368] ufshcd-qcom 1da4000.ufshc: ufshcd_complete_dev_init setting fDeviceInit flag failed with error -11 And then the next 3 commands fail by timing out (tag 31 still). So the driver throws its hands in the air, and gives up. > diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi > index b4276da1fb0d..e1c87de39076 100644 > --- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi > +++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi > @@ -241,3 +241,49 @@ > }; > }; > }; > + > +&ufshc { > + status = "ok"; > +/*** vdd-hba-supply = <&gcc UFS_GDSC>; -EPROBE_DEFER ***/ > + pinctrl-names = "dev-reset-assert", "dev-reset-deassert"; > + pinctrl-0 = <&ufs_dev_reset_assert>; > + pinctrl-1 = <&ufs_dev_reset_deassert>; > + vdd-hba-fixed-regulator; > + vcc-supply = <&vreg_l20a_2p95>; > + vccq-supply = <&vreg_l26a_1p2>; > + vccq2-supply = <&vreg_s4a_1p8>; > + vcc-max-microamp = <750000>; > + vccq-max-microamp = <560000>; > + vccq2-max-microamp = <750000>; > +}; > + > +&ufsphy { > + status = "ok"; > + vdda-phy-supply = <&vreg_l1a_0p875>; > + vdda-pll-supply = <&vreg_l2a_1p2>; > + vddp-ref-clk-supply = <&vreg_l26a_1p2>; > + vdda-phy-max-microamp = <51400>; > + vdda-pll-max-microamp = <14600>; > + vddp-ref-clk-max-microamp = <100>; > + vddp-ref-clk-always-on; > +}; > + > +&tlmm { > + gpio-reserved-ranges = <0 4>, <81 4>; > + ufs_dev_reset_assert: ufs_dev_reset_assert { > + config { > + pins = "ufs_reset"; > + bias-pull-down; > + drive-strength = <8>; > + output-low; > + }; > + }; > + ufs_dev_reset_deassert: ufs_dev_reset_deassert { > + config { > + pins = "ufs_reset"; > + bias-pull-down; > + drive-strength = <8>; > + output-high; > + }; > + }; > +}; Copied from downstream. Will triple-check... > diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi > index 78227cce16db..03ba269f5440 100644 > --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi > +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi > @@ -3,11 +3,12 @@ > > #include <dt-bindings/interrupt-controller/arm-gic.h> > #include <dt-bindings/clock/qcom,gcc-msm8998.h> > +#include <dt-bindings/clock/qcom,rpmcc.h> > > / { > interrupt-parent = <&intc>; > > - qcom,msm-id = <292 0x0>; > + qcom,msm-id = <319 0x20001>; > > #address-cells = <2>; > #size-cells = <2>; > @@ -264,6 +265,11 @@ > rpm_requests: rpm-requests { > compatible = "qcom,rpm-msm8998"; > qcom,glink-channels = "rpm_requests"; > + > + rpmcc: qcom,rpmcc { > + compatible = "qcom,rpmcc-msm8998"; > + #clock-cells = <1>; > + }; > }; > }; > > @@ -686,5 +692,75 @@ > redistributor-stride = <0x0 0x20000>; > interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; > }; > + > + ufshc: ufshc@1da4000 { > + compatible = "qcom,msm8998-ufshc", "qcom,ufshc", > + "jedec,ufs-2.0"; > + reg = <0x1da4000 0x2500>; > + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; > + phys = <&ufsphy_lanes>; > + phy-names = "ufsphy"; > + lanes-per-direction = <2>; > + power-domains = <&gcc UFS_GDSC>; Need to check this. > + > + clock-names = > + "core_clk", > + "bus_aggr_clk", > + "iface_clk", > + "core_clk_unipro", > + "core_clk_ice", > + "ref_clk", > + "tx_lane0_sync_clk", > + "rx_lane0_sync_clk", > + "rx_lane1_sync_clk"; > + clocks = > + <&gcc GCC_UFS_AXI_CLK>, > + <&gcc GCC_AGGRE1_UFS_AXI_CLK>, > + <&gcc GCC_UFS_AHB_CLK>, > + <&gcc GCC_UFS_UNIPRO_CORE_CLK>, > + <&gcc GCC_UFS_ICE_CORE_CLK>, > + <&rpmcc RPM_SMD_BB_CLK1>, Is that the right prop/phandle/offset? > + <&gcc GCC_UFS_TX_SYMBOL_0_CLK>, > + <&gcc GCC_UFS_RX_SYMBOL_0_CLK>, > + <&gcc GCC_UFS_RX_SYMBOL_1_CLK>; > + freq-table-hz = > + <50000000 200000000>, > + <0 0>, > + <0 0>, > + <37500000 150000000>, > + <75000000 300000000>, > + <0 0>, > + <0 0>, > + <0 0>, > + <0 0>; > + > + resets = <&gcc GCC_UFS_BCR>; > + reset-names = "rst"; Evan/Bjorn said this is unused. Need to check. > + > + status = "disabled"; > + }; > + > + ufsphy: phy@1da7000 { > + compatible = "qcom,sdm845-qmp-ufs-phy"; > + reg = <0x1da7000 0x18c>; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + clock-names = "ref", "ref_aux"; > + clocks = > + <&gcc GCC_UFS_CLKREF_CLK>, > + <&gcc GCC_UFS_PHY_AUX_CLK>; Make sure these clocks are prepared/enabled. > + > + status = "disabled"; > + > + ufsphy_lanes: lanes@1da7400 { > + reg = <0x1da7400 0x108>, > + <0x1da7600 0x1e0>, > + <0x1da7c00 0x1dc>, > + <0x1da7800 0x108>, > + <0x1da7a00 0x1e0>; > + #phy-cells = <0>; > + }; > + }; > }; > }; > diff --git a/drivers/clk/qcom/clk-smd-rpm.c b/drivers/clk/qcom/clk-smd-rpm.c > index 850c02a52248..be072897a80d 100644 > --- a/drivers/clk/qcom/clk-smd-rpm.c > +++ b/drivers/clk/qcom/clk-smd-rpm.c > @@ -611,10 +611,113 @@ static const struct rpm_smd_clk_desc rpm_clk_msm8996 = { > .num_clks = ARRAY_SIZE(msm8996_clks), > }; > > +/* QCS404 */ > +DEFINE_CLK_SMD_RPM_QDSS(qcs404, qdss_clk, qdss_a_clk, QCOM_SMD_RPM_MISC_CLK, 1); > + > +DEFINE_CLK_SMD_RPM(qcs404, pnoc_clk, pnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 0); > +DEFINE_CLK_SMD_RPM(qcs404, snoc_clk, snoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 1); > + > +DEFINE_CLK_SMD_RPM(qcs404, bimc_clk, bimc_a_clk, QCOM_SMD_RPM_MEM_CLK, 0); > +DEFINE_CLK_SMD_RPM(qcs404, bimc_gpu_clk, bimc_gpu_a_clk, QCOM_SMD_RPM_MEM_CLK, 2); > + > +DEFINE_CLK_SMD_RPM(qcs404, qpic_clk, qpic_a_clk, QCOM_SMD_RPM_QPIC_CLK, 0); > +DEFINE_CLK_SMD_RPM(qcs404, ce1_clk, ce1_a_clk, QCOM_SMD_RPM_CE_CLK, 0); > + > +DEFINE_CLK_SMD_RPM_XO_BUFFER(qcs404, rf_clk1, rf_clk1_a, 4); > +DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(qcs404, rf_clk1_pin, rf_clk1_a_pin, 4); > + > +DEFINE_CLK_SMD_RPM_XO_BUFFER(qcs404, ln_bb_clk, ln_bb_a_clk, 8); > +DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(qcs404, ln_bb_clk_pin, ln_bb_clk_a_pin, 8); > + > +static struct clk_smd_rpm *qcs404_clks[] = { > + [RPM_SMD_QDSS_CLK] = &qcs404_qdss_clk, > + [RPM_SMD_QDSS_A_CLK] = &qcs404_qdss_a_clk, > + [RPM_SMD_PNOC_CLK] = &qcs404_pnoc_clk, > + [RPM_SMD_PNOC_A_CLK] = &qcs404_pnoc_a_clk, > + [RPM_SMD_SNOC_CLK] = &qcs404_snoc_clk, > + [RPM_SMD_SNOC_A_CLK] = &qcs404_snoc_a_clk, > + [RPM_SMD_BIMC_CLK] = &qcs404_bimc_clk, > + [RPM_SMD_BIMC_A_CLK] = &qcs404_bimc_a_clk, > + [RPM_SMD_BIMC_GPU_CLK] = &qcs404_bimc_gpu_clk, > + [RPM_SMD_BIMC_GPU_A_CLK] = &qcs404_bimc_gpu_a_clk, > + [RPM_SMD_QPIC_CLK] = &qcs404_qpic_clk, > + [RPM_SMD_QPIC_CLK_A] = &qcs404_qpic_a_clk, > + [RPM_SMD_CE1_CLK] = &qcs404_ce1_clk, > + [RPM_SMD_CE1_A_CLK] = &qcs404_ce1_a_clk, > + [RPM_SMD_RF_CLK1] = &qcs404_rf_clk1, > + [RPM_SMD_RF_CLK1_A] = &qcs404_rf_clk1_a, > + [RPM_SMD_LN_BB_CLK] = &qcs404_ln_bb_clk, > + [RPM_SMD_LN_BB_A_CLK] = &qcs404_ln_bb_a_clk, > +}; > + > +static const struct rpm_smd_clk_desc rpm_clk_qcs404 = { > + .clks = qcs404_clks, > + .num_clks = ARRAY_SIZE(qcs404_clks), > +}; > + > +/* msm8998 */ > +DEFINE_CLK_SMD_RPM(msm8998, snoc_clk, snoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 1); > +DEFINE_CLK_SMD_RPM(msm8998, cnoc_clk, cnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 2); > +DEFINE_CLK_SMD_RPM(msm8998, ce1_clk, ce1_a_clk, QCOM_SMD_RPM_CE_CLK, 0); > +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8998, div_clk1, div_clk1_a, 0xb); > +DEFINE_CLK_SMD_RPM(msm8998, ipa_clk, ipa_a_clk, QCOM_SMD_RPM_IPA_CLK, 0); > +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8998, bb_clk1, bb_clk1_a, 1); > +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8998, bb_clk2, bb_clk2_a, 2); > +DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8998, bb_clk3_pin, bb_clk3_a_pin, 3); > +DEFINE_CLK_SMD_RPM(msm8998, mmssnoc_axi_rpm_clk, mmssnoc_axi_rpm_a_clk, > + QCOM_SMD_RPM_MMAXI_CLK, 0); > +DEFINE_CLK_SMD_RPM(msm8998, aggre1_noc_clk, aggre1_noc_a_clk, > + QCOM_SMD_RPM_AGGR_CLK, 1); > +DEFINE_CLK_SMD_RPM(msm8998, aggre2_noc_clk, aggre2_noc_a_clk, > + QCOM_SMD_RPM_AGGR_CLK, 2); > +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8998, rf_clk1, rf_clk1_a, 4); > +DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8998, rf_clk2_pin, rf_clk2_a_pin, 5); > +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8998, rf_clk3, rf_clk3_a, 6); > +DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8998, rf_clk3_pin, rf_clk3_a_pin, 6); > +static struct clk_smd_rpm *msm8998_clks[] = { > + [RPM_SMD_SNOC_CLK] = &msm8998_snoc_clk, > + [RPM_SMD_SNOC_A_CLK] = &msm8998_snoc_a_clk, > + [RPM_SMD_CNOC_CLK] = &msm8998_cnoc_clk, > + [RPM_SMD_CNOC_A_CLK] = &msm8998_cnoc_a_clk, > + [RPM_SMD_CE1_CLK] = &msm8998_ce1_clk, > + [RPM_SMD_CE1_A_CLK] = &msm8998_ce1_a_clk, > + [RPM_SMD_DIV_CLK1] = &msm8998_div_clk1, > + [RPM_SMD_DIV_A_CLK1] = &msm8998_div_clk1_a, > + [RPM_SMD_IPA_CLK] = &msm8998_ipa_clk, > + [RPM_SMD_IPA_A_CLK] = &msm8998_ipa_a_clk, > + [RPM_SMD_BB_CLK1] = &msm8998_bb_clk1, > + [RPM_SMD_BB_CLK1_A] = &msm8998_bb_clk1_a, > + [RPM_SMD_BB_CLK2] = &msm8998_bb_clk2, > + [RPM_SMD_BB_CLK2_A] = &msm8998_bb_clk2_a, > + [RPM_SMD_BB_CLK3_PIN] = &msm8998_bb_clk3_pin, > + [RPM_SMD_BB_CLK3_A_PIN] = &msm8998_bb_clk3_a_pin, > + [RPM_SMD_MMAXI_CLK] = &msm8998_mmssnoc_axi_rpm_clk, > + [RPM_SMD_MMAXI_A_CLK] = &msm8998_mmssnoc_axi_rpm_a_clk, > + [RPM_SMD_AGGR1_NOC_CLK] = &msm8998_aggre1_noc_clk, > + [RPM_SMD_AGGR1_NOC_A_CLK] = &msm8998_aggre1_noc_a_clk, > + [RPM_SMD_AGGR2_NOC_CLK] = &msm8998_aggre2_noc_clk, > + [RPM_SMD_AGGR2_NOC_A_CLK] = &msm8998_aggre2_noc_a_clk, > + [RPM_SMD_RF_CLK1] = &msm8998_rf_clk1, > + [RPM_SMD_RF_CLK1_A] = &msm8998_rf_clk1_a, > + [RPM_SMD_RF_CLK2_PIN] = &msm8998_rf_clk2_pin, > + [RPM_SMD_RF_CLK2_A_PIN] = &msm8998_rf_clk2_a_pin, > + [RPM_SMD_RF_CLK3] = &msm8998_rf_clk3, > + [RPM_SMD_RF_CLK3_A] = &msm8998_rf_clk3_a, > + [RPM_SMD_RF_CLK3_PIN] = &msm8998_rf_clk3_pin, > + [RPM_SMD_RF_CLK3_A_PIN] = &msm8998_rf_clk3_a_pin, > +}; > + > +static const struct rpm_smd_clk_desc rpm_clk_msm8998 = { > + .clks = msm8998_clks, > + .num_clks = ARRAY_SIZE(msm8998_clks), > +}; > + > static const struct of_device_id rpm_smd_clk_match_table[] = { > { .compatible = "qcom,rpmcc-msm8916", .data = &rpm_clk_msm8916 }, > { .compatible = "qcom,rpmcc-msm8974", .data = &rpm_clk_msm8974 }, > { .compatible = "qcom,rpmcc-msm8996", .data = &rpm_clk_msm8996 }, > + { .compatible = "qcom,rpmcc-msm8998", .data = &rpm_clk_msm8998 }, > + { .compatible = "qcom,rpmcc-qcs404", .data = &rpm_clk_qcs404 }, > { } > }; > MODULE_DEVICE_TABLE(of, rpm_smd_clk_match_table); Jeffrey's RPMCC patch. Looks good. > diff --git a/drivers/clk/qcom/gcc-msm8998.c b/drivers/clk/qcom/gcc-msm8998.c > index 9f0ae403d5f5..621f1a66ce86 100644 > --- a/drivers/clk/qcom/gcc-msm8998.c > +++ b/drivers/clk/qcom/gcc-msm8998.c > @@ -117,6 +117,17 @@ static const char * const gcc_parent_names_5[] = { > "core_bi_pll_test_se", > }; > > +static struct clk_fixed_factor xo = { > + .mult = 1, > + .div = 1, > + .hw.init = &(struct clk_init_data){ > + .name = "xo", > + .parent_names = (const char *[]){ "xo_board" }, > + .num_parents = 1, > + .ops = &clk_fixed_factor_ops, > + }, > +}; > + > static struct pll_vco fabia_vco[] = { > { 250000000, 2000000000, 0 }, > { 125000000, 1000000000, 1 }, > @@ -1099,6 +1110,27 @@ static struct clk_rcg2 ufs_axi_clk_src = { > }, > }; > > +static const struct freq_tbl ftbl_ufs_unipro_core_clk_src[] = { > + F(37500000, P_GPLL0_OUT_MAIN, 16, 0, 0), > + F(75000000, P_GPLL0_OUT_MAIN, 8, 0, 0), > + F(150000000, P_GPLL0_OUT_MAIN, 4, 0, 0), > + { } > +}; > + > +static struct clk_rcg2 ufs_unipro_core_clk_src = { > + .cmd_rcgr = 0x76028, > + .mnd_width = 0, > + .hid_width = 5, > + .parent_map = gcc_parent_map_1, > + .freq_tbl = ftbl_ufs_unipro_core_clk_src, > + .clkr.hw.init = &(struct clk_init_data){ > + .name = "ufs_unipro_core_clk_src", > + .parent_names = gcc_parent_names_1, > + .num_parents = 3, > + .ops = &clk_rcg2_ops, > + }, > +}; > + > static const struct freq_tbl ftbl_usb30_master_clk_src[] = { > F(19200000, P_XO, 1, 0, 0), > F(120000000, P_GPLL0_OUT_MAIN, 5, 0, 0), My ufs_unipro_core_clk hack looks suspicious. Could someone check? Will double check as well. > @@ -1884,7 +1916,7 @@ static struct clk_branch gcc_gp3_clk = { > > static struct clk_branch gcc_gpu_bimc_gfx_clk = { > .halt_reg = 0x71010, > - .halt_check = BRANCH_HALT, > + .halt_check = BRANCH_HALT_SKIP, > .clkr = { > .enable_reg = 0x71010, > .enable_mask = BIT(0), > @@ -1972,6 +2004,7 @@ static struct clk_branch gcc_hmss_dvm_bus_clk = { > .enable_mask = BIT(0), > .hw.init = &(struct clk_init_data){ > .name = "gcc_hmss_dvm_bus_clk", > + .flags = CLK_IS_CRITICAL, > .ops = &clk_branch2_ops, > }, > }, > @@ -2015,6 +2048,7 @@ static struct clk_branch gcc_lpass_at_clk = { > .enable_mask = BIT(0), > .hw.init = &(struct clk_init_data){ > .name = "gcc_lpass_at_clk", > + .flags = CLK_IS_CRITICAL, > .ops = &clk_branch2_ops, > }, > }, > @@ -2401,7 +2435,7 @@ static struct clk_branch gcc_ufs_phy_aux_clk = { > > static struct clk_branch gcc_ufs_rx_symbol_0_clk = { > .halt_reg = 0x75014, > - .halt_check = BRANCH_HALT, > + .halt_check = BRANCH_HALT_SKIP, > .clkr = { > .enable_reg = 0x75014, > .enable_mask = BIT(0), > @@ -2414,7 +2448,7 @@ static struct clk_branch gcc_ufs_rx_symbol_0_clk = { > > static struct clk_branch gcc_ufs_rx_symbol_1_clk = { > .halt_reg = 0x7605c, > - .halt_check = BRANCH_HALT, > + .halt_check = BRANCH_HALT_SKIP, > .clkr = { > .enable_reg = 0x7605c, > .enable_mask = BIT(0), > @@ -2427,7 +2461,7 @@ static struct clk_branch gcc_ufs_rx_symbol_1_clk = { > > static struct clk_branch gcc_ufs_tx_symbol_0_clk = { > .halt_reg = 0x75010, > - .halt_check = BRANCH_HALT, > + .halt_check = BRANCH_HALT_SKIP, > .clkr = { > .enable_reg = 0x75010, > .enable_mask = BIT(0), > @@ -2438,6 +2472,8 @@ static struct clk_branch gcc_ufs_tx_symbol_0_clk = { > }, > }; > > +static const char *foo[] = { "ufs_unipro_core_clk_src" }; > + > static struct clk_branch gcc_ufs_unipro_core_clk = { > .halt_reg = 0x76008, > .halt_check = BRANCH_HALT, > @@ -2446,6 +2482,8 @@ static struct clk_branch gcc_ufs_unipro_core_clk = { > .enable_mask = BIT(0), > .hw.init = &(struct clk_init_data){ > .name = "gcc_ufs_unipro_core_clk", > + .parent_names = foo, > + .num_parents = 1, > .ops = &clk_branch2_ops, > }, > }, Suspicious here too. My gut feeling is that something is broken in my version of the clock driver. Will triple-check everything. [big snip] Regards.
diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi index b4276da1fb0d..ad7542f461af 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi @@ -241,3 +241,26 @@ }; }; }; + +&ufshc { + status = "ok"; + vdd-hba-supply = <&gcc UFS_GDSC>; + vdd-hba-fixed-regulator; + vcc-supply = <&vreg_l20a_2p95>; + vccq-supply = <&vreg_l26a_1p2>; + vccq2-supply = <&vreg_s4a_1p8>; + vcc-max-microamp = <750000>; + vccq-max-microamp = <560000>; + vccq2-max-microamp = <750000>; +}; + +&ufsphy { + status = "ok"; + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l2a_1p2>; + vddp-ref-clk-supply = <&vreg_l26a_1p2>; + vdda-phy-max-microamp = <51400>; + vdda-pll-max-microamp = <14600>; + vddp-ref-clk-max-microamp = <100>; + vddp-ref-clk-always-on; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index d291b4713c33..10e7b8a55b8a 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -264,6 +264,11 @@ rpm_requests: rpm-requests { compatible = "qcom,rpm-msm8998"; qcom,glink-channels = "rpm_requests"; + + rpmcc: qcom,rpmcc { + compatible = "qcom,rpmcc-msm8998"; + #clock-cells = <1>; + }; }; }; @@ -686,5 +691,79 @@ redistributor-stride = <0x0 0x20000>; interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; }; + + ufshc: ufshc@1da4000 { + compatible = "qcom,msm8998-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0x1da4000 0x2500>; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + phys = <&ufsphy_lanes>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + power-domains = <&gcc UFS_GDSC>; + + clock-names = + "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "core_clk_ice", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + clocks = + <&gcc GCC_UFS_AXI_CLK>, + <&gcc GCC_AGGRE1_UFS_AXI_CLK>, + <&gcc GCC_UFS_AHB_CLK>, + <&gcc GCC_UFS_UNIPRO_CORE_CLK>, + <&gcc GCC_UFS_ICE_CORE_CLK>, + <&rpmcc 0>, + <&gcc GCC_UFS_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_RX_SYMBOL_1_CLK>; + freq-table-hz = + <50000000 200000000>, + <0 0>, + <0 0>, + <37500000 150000000>, + <75000000 300000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>; + + resets = <&gcc GCC_UFS_BCR>; + reset-names = "rst"; + + status = "disabled"; + }; + + ufsphy: phy@1da7000 { + compatible = "qcom,sdm845-qmp-ufs-phy"; + reg = <0x1da7000 0x18c>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clock-names = + "ref_clk_src", + "ref_clk", + "ref_aux_clk"; + clocks = + <&rpmcc 0>, + <&gcc GCC_UFS_CLKREF_CLK>, + <&gcc GCC_UFS_PHY_AUX_CLK>; + + status = "disabled"; + + ufsphy_lanes: lanes@1da7400 { + reg = <0x1da7400 0x108>, + <0x1da7600 0x1e0>, + <0x1da7c00 0x1dc>, + <0x1da7800 0x108>, + <0x1da7a00 0x1e0>; + #phy-cells = <0>; + }; + }; }; }; diff --git a/drivers/clk/qcom/clk-smd-rpm.c b/drivers/clk/qcom/clk-smd-rpm.c index 850c02a52248..12a0a2d6ec7b 100644 --- a/drivers/clk/qcom/clk-smd-rpm.c +++ b/drivers/clk/qcom/clk-smd-rpm.c @@ -611,10 +611,25 @@ static const struct rpm_smd_clk_desc rpm_clk_msm8996 = { .num_clks = ARRAY_SIZE(msm8996_clks), }; +/* msm8998 */ +#define LN_BB_CLK1_ID 0x1 +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8998, ln_bb_clk1, ln_bb_a_clk1, LN_BB_CLK1_ID); + +static struct clk_smd_rpm *msm8998_clks[] = { + [0] = &msm8998_ln_bb_clk1, + [1] = &msm8998_ln_bb_a_clk1, +}; + +static const struct rpm_smd_clk_desc rpm_clk_msm8998 = { + .clks = msm8998_clks, + .num_clks = ARRAY_SIZE(msm8998_clks), +}; + static const struct of_device_id rpm_smd_clk_match_table[] = { { .compatible = "qcom,rpmcc-msm8916", .data = &rpm_clk_msm8916 }, { .compatible = "qcom,rpmcc-msm8974", .data = &rpm_clk_msm8974 }, { .compatible = "qcom,rpmcc-msm8996", .data = &rpm_clk_msm8996 }, + { .compatible = "qcom,rpmcc-msm8998", .data = &rpm_clk_msm8998 }, { } }; MODULE_DEVICE_TABLE(of, rpm_smd_clk_match_table);