| Message ID | 20181212123901.34109-1-hverkuil-cisco@xs4all.nl (mailing list archive) |
|---|---|
| Headers | show |
| Series | vb2/cedrus: use timestamps to identify buffers | expand |
Hi, On Wed, 2018-12-12 at 13:38 +0100, hverkuil-cisco@xs4all.nl wrote: > From: Hans Verkuil <hverkuil-cisco@xs4all.nl> > > As was discussed here (among other places): > > https://lkml.org/lkml/2018/10/19/440 > > using capture queue buffer indices to refer to reference frames is > not a good idea. > > Instead, after a long irc discussion: > > https://linuxtv.org/irc/irclogger_log/v4l?date=2018-12-12,Wed > > it was decided to use the timestamp in v4l2_buffer for this. > > However, struct timeval cannot be used in a compound control since > the size of struct timeval differs between 32 and 64 bit architectures, > and there are also changes upcoming for y2038 support. > > But internally the kernel converts the timeval to a u64 (nsecs since > boot). So we provide a helper function in videodev2.h that converts > the timeval to a u64, and that u64 can be used inside compound controls. > > In the not too distant future we want to create a new struct v4l2_buffer, > and then we'll use u64 from the start, so in that case the helper function > would no longer be needed. > > The first three patches add a new m2m helper function to correctly copy > the relevant data from an output buffer to a capture buffer. This will > simplify m2m drivers (in fact, many m2m drivers do not do this quite > right, so a helper function was really needed). > > The fourth patch clears up messy timecode documentation that I came > across while working on this. > > Patch 5 adds the new v4l2_timeval_to_ns helper function to videodev2.h. > The next patch adds the vb2_find_timestamp() function to find buffers > with a specific u64 timestamp. > > Finally the cedrus driver and documentation are updated to use a > timestamp as buffer identifier. > > I also removed the 'pad' fields from the mpeg2 control structs (it > should never been added in the first place) and aligned the structs > to a u32 boundary. > > Please note that this patch series will have to be updated one more > time when pending 4.20 fixes are merged back into our master since > those patches will move the cedrus mpeg controls to a different header. I hit the same build issue that Jonas reported already. With the appropriate fix, this works fine with the cedrus driver. So with the related fix included, this is: Tested-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Cheers, Paul > Regards, > > Hans > > Hans Verkuil (8): > v4l2-mem2mem: add v4l2_m2m_buf_copy_data helper function > vim2m: use v4l2_m2m_buf_copy_data > vicodec: use v4l2_m2m_buf_copy_data > buffer.rst: clean up timecode documentation > videodev2.h: add v4l2_timeval_to_ns inline function > vb2: add vb2_find_timestamp() > cedrus: identify buffers by timestamp > extended-controls.rst: update the mpeg2 compound controls > > Documentation/media/uapi/v4l/buffer.rst | 11 ++++---- > .../media/uapi/v4l/extended-controls.rst | 28 +++++++++++-------- > .../media/common/videobuf2/videobuf2-v4l2.c | 22 +++++++++++++-- > drivers/media/platform/vicodec/vicodec-core.c | 12 +------- > drivers/media/platform/vim2m.c | 12 +------- > drivers/media/v4l2-core/v4l2-ctrls.c | 9 ------ > drivers/media/v4l2-core/v4l2-mem2mem.c | 20 +++++++++++++ > drivers/staging/media/sunxi/cedrus/cedrus.h | 9 ++++-- > .../staging/media/sunxi/cedrus/cedrus_dec.c | 2 ++ > .../staging/media/sunxi/cedrus/cedrus_mpeg2.c | 21 ++++++-------- > include/media/v4l2-mem2mem.h | 20 +++++++++++++ > include/media/videobuf2-v4l2.h | 19 ++++++++++++- > include/uapi/linux/v4l2-controls.h | 14 ++++------ > include/uapi/linux/videodev2.h | 12 ++++++++ > 14 files changed, 136 insertions(+), 75 deletions(-) >
From: Hans Verkuil <hverkuil-cisco@xs4all.nl> As was discussed here (among other places): https://lkml.org/lkml/2018/10/19/440 using capture queue buffer indices to refer to reference frames is not a good idea. Instead, after a long irc discussion: https://linuxtv.org/irc/irclogger_log/v4l?date=2018-12-12,Wed it was decided to use the timestamp in v4l2_buffer for this. However, struct timeval cannot be used in a compound control since the size of struct timeval differs between 32 and 64 bit architectures, and there are also changes upcoming for y2038 support. But internally the kernel converts the timeval to a u64 (nsecs since boot). So we provide a helper function in videodev2.h that converts the timeval to a u64, and that u64 can be used inside compound controls. In the not too distant future we want to create a new struct v4l2_buffer, and then we'll use u64 from the start, so in that case the helper function would no longer be needed. The first three patches add a new m2m helper function to correctly copy the relevant data from an output buffer to a capture buffer. This will simplify m2m drivers (in fact, many m2m drivers do not do this quite right, so a helper function was really needed). The fourth patch clears up messy timecode documentation that I came across while working on this. Patch 5 adds the new v4l2_timeval_to_ns helper function to videodev2.h. The next patch adds the vb2_find_timestamp() function to find buffers with a specific u64 timestamp. Finally the cedrus driver and documentation are updated to use a timestamp as buffer identifier. I also removed the 'pad' fields from the mpeg2 control structs (it should never been added in the first place) and aligned the structs to a u32 boundary. Please note that this patch series will have to be updated one more time when pending 4.20 fixes are merged back into our master since those patches will move the cedrus mpeg controls to a different header. Regards, Hans Hans Verkuil (8): v4l2-mem2mem: add v4l2_m2m_buf_copy_data helper function vim2m: use v4l2_m2m_buf_copy_data vicodec: use v4l2_m2m_buf_copy_data buffer.rst: clean up timecode documentation videodev2.h: add v4l2_timeval_to_ns inline function vb2: add vb2_find_timestamp() cedrus: identify buffers by timestamp extended-controls.rst: update the mpeg2 compound controls Documentation/media/uapi/v4l/buffer.rst | 11 ++++---- .../media/uapi/v4l/extended-controls.rst | 28 +++++++++++-------- .../media/common/videobuf2/videobuf2-v4l2.c | 22 +++++++++++++-- drivers/media/platform/vicodec/vicodec-core.c | 12 +------- drivers/media/platform/vim2m.c | 12 +------- drivers/media/v4l2-core/v4l2-ctrls.c | 9 ------ drivers/media/v4l2-core/v4l2-mem2mem.c | 20 +++++++++++++ drivers/staging/media/sunxi/cedrus/cedrus.h | 9 ++++-- .../staging/media/sunxi/cedrus/cedrus_dec.c | 2 ++ .../staging/media/sunxi/cedrus/cedrus_mpeg2.c | 21 ++++++-------- include/media/v4l2-mem2mem.h | 20 +++++++++++++ include/media/videobuf2-v4l2.h | 19 ++++++++++++- include/uapi/linux/v4l2-controls.h | 14 ++++------ include/uapi/linux/videodev2.h | 12 ++++++++ 14 files changed, 136 insertions(+), 75 deletions(-)