diff mbox series

[RFC,03/10] dt-bindings: dmaengine: Add Allwinner suniv F1C100s DMA

Message ID 7322bdfcd38cdcd8ccec56fea25492e4945d498f.1543782328.git.mesihkilinc@gmail.com (mailing list archive)
State RFC
Headers show
Series Add support for DMA and audio codec of F1C100s | expand

Commit Message

Mesih Kilinc Dec. 2, 2018, 9:23 p.m. UTC
Add compatible string for Allwinner suniv F1C100s DMA.

Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com>
---
 Documentation/devicetree/bindings/dma/sun4i-dma.txt | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

Comments

Rob Herring Dec. 19, 2018, 2:03 p.m. UTC | #1
On Mon,  3 Dec 2018 00:23:10 +0300, Mesih Kilinc wrote:
> Add compatible string for Allwinner suniv F1C100s DMA.
> 
> Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com>
> ---
>  Documentation/devicetree/bindings/dma/sun4i-dma.txt | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/dma/sun4i-dma.txt b/Documentation/devicetree/bindings/dma/sun4i-dma.txt
index 8ad556a..ceeb41e 100644
--- a/Documentation/devicetree/bindings/dma/sun4i-dma.txt
+++ b/Documentation/devicetree/bindings/dma/sun4i-dma.txt
@@ -4,7 +4,9 @@  This driver follows the generic DMA bindings defined in dma.txt.
 
 Required properties:
 
-- compatible:	Must be "allwinner,sun4i-a10-dma"
+- compatible:	Should be one of the following:
+		"allwinner,sun4i-a10-dma"
+		"allwinner,suniv-f1c100s-dma"
 - reg:		Should contain the registers base address and length
 - interrupts:	Should contain a reference to the interrupt used by this device
 - clocks:	Should contain a reference to the parent AHB clock