Message ID | 20181203034515.91412-3-chenyu56@huawei.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | Add support for usb on Hikey960 | expand |
On Mon, Dec 03, 2018 at 11:45:05AM +0800, Yu Chen wrote: > This patch adds binding documentation for supporting the hi3660 usb > phy on boards like the HiKey960. > > Cc: Rob Herring <robh+dt@kernel.org> > Cc: Mark Rutland <mark.rutland@arm.com> > Cc: John Stultz <john.stultz@linaro.org> > Cc: Binghui Wang <wangbinghui@hisilicon.com> > Signed-off-by: Yu Chen <chenyu56@huawei.com> > -- > v1: Fix some format error as suggested by Rob. > -- > --- > .../devicetree/bindings/phy/phy-hi3660-usb3.txt | 21 +++++++++++++++++++++ > 1 file changed, 21 insertions(+) > create mode 100644 Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt > > diff --git a/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt b/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt > new file mode 100644 > index 000000000000..8ea52d51aa13 > --- /dev/null > +++ b/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt > @@ -0,0 +1,21 @@ > +Hisilicon hi3660 usb PHY s/usb/USB/ > +----------------------- > + > +Required properties: > +- compatible: should be "hisilicon,hi3660-usb-phy" > +- #phy-cells: must be 0 > +- hisilicon,pericrg-syscon: phandle of syscon used to control phy. > +- hisilicon,pctrl-syscon: phandle of syscon used to control phy. > +- hisilicon,usb3-otg-bc-syscon: phandle of syscon used to control phy. > +- hisilicon,eye-diagram-param: parameter set for phy > +Refer to phy/phy-bindings.txt for the generic PHY binding properties Doesn't a phy need some clocks? > + > +Example: > + usb-phy { > + compatible = "hisilicon,hi3660-usb-phy"; > + #phy-cells = <0>; > + hisilicon,pericrg-syscon = <&crg_ctrl>; > + hisilicon,pctrl-syscon = <&pctrl>; > + hisilicon,usb3-otg-bc-syscon = <&usb3_otg_bc>; Is one of these the "main" registers for the phy? If so, then make this a child of that syscon node. > + hisilicon,eye-diagram-param = <0x22466e4>; > + }; > -- > 2.15.0-rc2 >
Hi, On 2018/12/19 22:14, Rob Herring wrote: > On Mon, Dec 03, 2018 at 11:45:05AM +0800, Yu Chen wrote: >> This patch adds binding documentation for supporting the hi3660 usb >> phy on boards like the HiKey960. >> >> Cc: Rob Herring <robh+dt@kernel.org> >> Cc: Mark Rutland <mark.rutland@arm.com> >> Cc: John Stultz <john.stultz@linaro.org> >> Cc: Binghui Wang <wangbinghui@hisilicon.com> >> Signed-off-by: Yu Chen <chenyu56@huawei.com> >> -- >> v1: Fix some format error as suggested by Rob. >> -- >> --- >> .../devicetree/bindings/phy/phy-hi3660-usb3.txt | 21 +++++++++++++++++++++ >> 1 file changed, 21 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt >> >> diff --git a/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt b/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt >> new file mode 100644 >> index 000000000000..8ea52d51aa13 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt >> @@ -0,0 +1,21 @@ >> +Hisilicon hi3660 usb PHY > > s/usb/USB/ OK. > >> +----------------------- >> + >> +Required properties: >> +- compatible: should be "hisilicon,hi3660-usb-phy" >> +- #phy-cells: must be 0 >> +- hisilicon,pericrg-syscon: phandle of syscon used to control phy. >> +- hisilicon,pctrl-syscon: phandle of syscon used to control phy. >> +- hisilicon,usb3-otg-bc-syscon: phandle of syscon used to control phy. >> +- hisilicon,eye-diagram-param: parameter set for phy >> +Refer to phy/phy-bindings.txt for the generic PHY binding properties > > Doesn't a phy need some clocks? > Yes, the clocks of USB phy currently is enabled by config the pctrl-syscon registers and pericrg-syscon. >> + >> +Example: >> + usb-phy { >> + compatible = "hisilicon,hi3660-usb-phy"; >> + #phy-cells = <0>; >> + hisilicon,pericrg-syscon = <&crg_ctrl>; >> + hisilicon,pctrl-syscon = <&pctrl>; >> + hisilicon,usb3-otg-bc-syscon = <&usb3_otg_bc>; > > Is one of these the "main" registers for the phy? If so, then make this > a child of that syscon node. > Ok, the usb3-otg-bc-syscon is the "main" registers for the phy. >> + hisilicon,eye-diagram-param = <0x22466e4>; >> + }; >> -- >> 2.15.0-rc2 >> > > . >
diff --git a/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt b/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt new file mode 100644 index 000000000000..8ea52d51aa13 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt @@ -0,0 +1,21 @@ +Hisilicon hi3660 usb PHY +----------------------- + +Required properties: +- compatible: should be "hisilicon,hi3660-usb-phy" +- #phy-cells: must be 0 +- hisilicon,pericrg-syscon: phandle of syscon used to control phy. +- hisilicon,pctrl-syscon: phandle of syscon used to control phy. +- hisilicon,usb3-otg-bc-syscon: phandle of syscon used to control phy. +- hisilicon,eye-diagram-param: parameter set for phy +Refer to phy/phy-bindings.txt for the generic PHY binding properties + +Example: + usb-phy { + compatible = "hisilicon,hi3660-usb-phy"; + #phy-cells = <0>; + hisilicon,pericrg-syscon = <&crg_ctrl>; + hisilicon,pctrl-syscon = <&pctrl>; + hisilicon,usb3-otg-bc-syscon = <&usb3_otg_bc>; + hisilicon,eye-diagram-param = <0x22466e4>; + };
This patch adds binding documentation for supporting the hi3660 usb phy on boards like the HiKey960. Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Binghui Wang <wangbinghui@hisilicon.com> Signed-off-by: Yu Chen <chenyu56@huawei.com> -- v1: Fix some format error as suggested by Rob. -- --- .../devicetree/bindings/phy/phy-hi3660-usb3.txt | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt