mbox series

[v7,00/11] Add initial RDA8810PL SoC and Orange Pi boards support

Message ID 20181218150238.23010-1-manivannan.sadhasivam@linaro.org (mailing list archive)
Headers show
Series Add initial RDA8810PL SoC and Orange Pi boards support | expand

Message

Manivannan Sadhasivam Dec. 18, 2018, 3:02 p.m. UTC 
Hello Maintainers,

This patch series adds initial RDA8810PL SoC and Orange Pi boards (2G IoT and
i96) support. RDA8810PL is an ARM Cortex A5 based SoC with Vivante's GC860
GPU. The SoC has been added as a new ARM sub architecture with myself as the
maintainer.

More information about the boards can be found in below links:

1. Orange Pi 2G-IoT - http://www.orangepi.org/OrangePi2GIOT/
2. Orange Pi i96 - https://www.96boards.org/product/orangepi-i96/

All patches are reviewed by the corresponding subsystem maintainers. The
clocksource and irqchip patches are reviewed and merged while the serial
driver got review from Greg but I'm not sure who will apply it.

So as per my discussion with Arnd, sending the individual patches instead
of a Pull request so that the rest of the patches can go through the
ARM SoC tree.

Please consider applying it.

Thanks,
Mani

Andreas Färber (4):
  dt-bindings: Add RDA Micro vendor prefix
  dt-bindings: arm: Document RDA8810PL and reference boards
  ARM: Prepare RDA8810PL SoC
  dt-bindings: serial: Document RDA Micro UART

Manivannan Sadhasivam (7):
  ARM: dts: Add devicetree for RDA8810PL SoC
  ARM: dts: Add devicetree for OrangePi 2G IoT board
  ARM: dts: Add devicetree for OrangePi i96 board
  ARM: dts: rda8810pl: Add timer support
  ARM: dts: rda8810pl: Add interrupt support for UART
  tty: serial: Add RDA8810PL UART driver
  MAINTAINERS: Add entry for RDA Micro SoC architecture

 .../admin-guide/kernel-parameters.txt         |   6 +
 Documentation/devicetree/bindings/arm/rda.txt |  17 +
 .../bindings/serial/rda,8810pl-uart.txt       |  17 +
 .../devicetree/bindings/vendor-prefixes.txt   |   1 +
 MAINTAINERS                                   |  14 +
 arch/arm/Kconfig                              |   2 +
 arch/arm/Makefile                             |   1 +
 arch/arm/boot/dts/Makefile                    |   3 +
 .../boot/dts/rda8810pl-orangepi-2g-iot.dts    |  50 ++
 arch/arm/boot/dts/rda8810pl-orangepi-i96.dts  |  50 ++
 arch/arm/boot/dts/rda8810pl.dtsi              |  99 +++
 arch/arm/mach-rda/Kconfig                     |   7 +
 arch/arm/mach-rda/Makefile                    |   1 +
 drivers/tty/serial/Kconfig                    |  19 +
 drivers/tty/serial/Makefile                   |   1 +
 drivers/tty/serial/rda-uart.c                 | 831 ++++++++++++++++++
 include/uapi/linux/serial_core.h              |   3 +
 17 files changed, 1122 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/rda.txt
 create mode 100644 Documentation/devicetree/bindings/serial/rda,8810pl-uart.txt
 create mode 100644 arch/arm/boot/dts/rda8810pl-orangepi-2g-iot.dts
 create mode 100644 arch/arm/boot/dts/rda8810pl-orangepi-i96.dts
 create mode 100644 arch/arm/boot/dts/rda8810pl.dtsi
 create mode 100644 arch/arm/mach-rda/Kconfig
 create mode 100644 arch/arm/mach-rda/Makefile
 create mode 100644 drivers/tty/serial/rda-uart.c

Comments

Olof Johansson Dec. 31, 2018, 9:13 p.m. UTC | #1 
On Tue, Dec 18, 2018 at 08:32:27PM +0530, Manivannan Sadhasivam wrote:
> Hello Maintainers,
> 
> This patch series adds initial RDA8810PL SoC and Orange Pi boards (2G IoT and
> i96) support. RDA8810PL is an ARM Cortex A5 based SoC with Vivante's GC860
> GPU. The SoC has been added as a new ARM sub architecture with myself as the
> maintainer.
> 
> More information about the boards can be found in below links:
> 
> 1. Orange Pi 2G-IoT - http://www.orangepi.org/OrangePi2GIOT/
> 2. Orange Pi i96 - https://www.96boards.org/product/orangepi-i96/
> 
> All patches are reviewed by the corresponding subsystem maintainers. The
> clocksource and irqchip patches are reviewed and merged while the serial
> driver got review from Greg but I'm not sure who will apply it.
> 
> So as per my discussion with Arnd, sending the individual patches instead
> of a Pull request so that the rest of the patches can go through the
> ARM SoC tree.
> 
> Please consider applying it.

Hi,

I've applied this series to our next/late branch. It's a branch we'll try to
get merged by the end of the merge window, but it's not a guarantee that we'll
be able to get it done. If not, the material will be moved to the next release
instead.


Thanks!


-Olof
Manivannan Sadhasivam Jan. 1, 2019, 3:02 a.m. UTC | #2 
Hi Olof,

On Mon, Dec 31, 2018 at 01:13:42PM -0800, Olof Johansson wrote:
> On Tue, Dec 18, 2018 at 08:32:27PM +0530, Manivannan Sadhasivam wrote:
> > Hello Maintainers,
> > 
> > This patch series adds initial RDA8810PL SoC and Orange Pi boards (2G IoT and
> > i96) support. RDA8810PL is an ARM Cortex A5 based SoC with Vivante's GC860
> > GPU. The SoC has been added as a new ARM sub architecture with myself as the
> > maintainer.
> > 
> > More information about the boards can be found in below links:
> > 
> > 1. Orange Pi 2G-IoT - http://www.orangepi.org/OrangePi2GIOT/
> > 2. Orange Pi i96 - https://www.96boards.org/product/orangepi-i96/
> > 
> > All patches are reviewed by the corresponding subsystem maintainers. The
> > clocksource and irqchip patches are reviewed and merged while the serial
> > driver got review from Greg but I'm not sure who will apply it.
> > 
> > So as per my discussion with Arnd, sending the individual patches instead
> > of a Pull request so that the rest of the patches can go through the
> > ARM SoC tree.
> > 
> > Please consider applying it.
> 
> Hi,
> 
> I've applied this series to our next/late branch. It's a branch we'll try to
> get merged by the end of the merge window, but it's not a guarantee that we'll
> be able to get it done. If not, the material will be moved to the next release
> instead.
>

Okay, thanks for the update!

Regards,
Mani

> 
> Thanks!
> 
> 
> -Olof