| Message ID | 1545150569-14897-1-git-send-email-viorel.suman@nxp.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [RFC] ASoC: fsl: Add Audio Mixer CPU DAI driver | expand |
Hi Viorel, Sorry for the late response, having been on a long vacation. The code looks pretty clean. Just some small concerns/questions below. On Wed, Dec 19, 2018 at 12:30 AM Viorel Suman <viorel.suman@nxp.com> wrote: > > This patch implements Audio Mixer CPU DAI driver for NXP iMX8 SOCs. > The Audio Mixer is a on-chip functional module that allows mixing of > two audio streams into a single audio stream. > > Audio Mixer datasheet is available here: > https://www.nxp.com/docs/en/reference-manual/IMX8DQXPRM.pdf > > Signed-off-by: Viorel Suman <viorel.suman@nxp.com> > --- > .../devicetree/bindings/sound/fsl,amix.txt | 45 ++ > sound/soc/fsl/Kconfig | 7 + > sound/soc/fsl/Makefile | 3 + > sound/soc/fsl/fsl_amix.c | 554 +++++++++++++++++++++ > sound/soc/fsl/fsl_amix.h | 101 ++++ I aimn't against the naming here, but it seems to be AUDMIX in RM? Would it be better to align with that? It's your decision though. > diff --git a/Documentation/devicetree/bindings/sound/fsl,amix.txt b/Documentation/devicetree/bindings/sound/fsl,amix.txt > +================================= > + - compatible : Compatible list, contains "fsl,imx8qm-amix" > + > + - reg : Offset and length of the register set for the device. > + > + - clocks : Must contain an entry for each entry in clock-names. > + > + - clock-names : Must include the "ipg" for register access. > + > + - power-domains : Must contain the phandle to the AMIX power domain node > + > +Device driver configuration example: > +====================================== > + amix: amix@59840000 { > + compatible = "fsl,imx8qm-amix"; > + reg = <0x0 0x59840000 0x0 0x10000>; > + clocks = <&clk IMX8QXP_AUD_AMIX_IPG>; > + clock-names = "ipg"; > + power-domains = <&pd_amix>; > + }; From the description of DT and RM, I don't see how it connects to SAIs. Are they fixed to SAI0 and SAI1 in imx8qm? Wondering if it'd be better to have such information in the doc. > diff --git a/sound/soc/fsl/fsl_amix.c b/sound/soc/fsl/fsl_amix.c +static const char + *width_sel[] = { "16b", "18b", "20b", "24b", "32b", }, + *pol_sel[] = { "Positive edge", "Negative edge", }, [...] +static const struct soc_enum fsl_amix_enum[] = { +/* FSL_AMIX_CTR enums */ [...] +SOC_ENUM_SINGLE_S(FSL_AMIX_CTR, FSL_AMIX_CTR_OUTWIDTH_SHIFT, width_sel), +SOC_ENUM_SINGLE_S(FSL_AMIX_CTR, FSL_AMIX_CTR_OUTCKPOL_SHIFT, pol_sel), Should we handle the width in hw_param()? Why do we change pol here? It feels like against set_fmt(). > +static int fsl_amix_dai_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) > +{ > + /* For playback the AMIX is slave, and for record is master */ > + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { > + case SND_SOC_DAIFMT_CBM_CFM: > + case SND_SOC_DAIFMT_CBS_CFS: So it's used either for playback or capture only, not both at same time? Thanks Nicolin
On Tue, Dec 18, 2018 at 04:30:01PM +0000, Viorel Suman wrote: > This patch implements Audio Mixer CPU DAI driver for NXP iMX8 SOCs. > The Audio Mixer is a on-chip functional module that allows mixing of > two audio streams into a single audio stream. > > Audio Mixer datasheet is available here: > https://www.nxp.com/docs/en/reference-manual/IMX8DQXPRM.pdf > > Signed-off-by: Viorel Suman <viorel.suman@nxp.com> > --- > .../devicetree/bindings/sound/fsl,amix.txt | 45 ++ This should be a separate patch. > sound/soc/fsl/Kconfig | 7 + > sound/soc/fsl/Makefile | 3 + > sound/soc/fsl/fsl_amix.c | 554 +++++++++++++++++++++ > sound/soc/fsl/fsl_amix.h | 101 ++++ > 5 files changed, 710 insertions(+) > create mode 100644 Documentation/devicetree/bindings/sound/fsl,amix.txt > create mode 100644 sound/soc/fsl/fsl_amix.c > create mode 100644 sound/soc/fsl/fsl_amix.h > > diff --git a/Documentation/devicetree/bindings/sound/fsl,amix.txt b/Documentation/devicetree/bindings/sound/fsl,amix.txt > new file mode 100644 > index 0000000..049144f > --- /dev/null > +++ b/Documentation/devicetree/bindings/sound/fsl,amix.txt > @@ -0,0 +1,45 @@ > +NXP Audio Mixer (AMIX). > + > +The Audio Mixer is a on-chip functional module that allows mixing of two > +audio streams into a single audio stream. Audio Mixer has two input serial > +audio interfaces. These are driven by two Synchronous Audio interface > +modules (SAI). Each input serial interface carries 8 audio channels in its > +frame in TDM manner. Mixer mixes audio samples of corresponding channels > +from two interfaces into a single sample. Before mixing, audio samples of > +two inputs can be attenuated based on configuration. The output of the > +Audio Mixer is also a serial audio interface. Like input interfaces it has > +the same TDM frame format. This output is used to drive the serial DAC TDM > +interface of audio codec and also sent to the external pins along with the > +receive path of normal audio SAI module for readback by the CPU. > + > +The output of Audio mixer can be selected from any of the three streams > + - serial audio input 1 > + - serial audio input 2 > + - Mixed audio > + > +Mixing operation is independent of audio sample rate but the two audio > +input streams must have same audio sample rate with same number of channels > +in TDM frame to be eligible for mixing. > + > +Device driver required properties: > +================================= > + - compatible : Compatible list, contains "fsl,imx8qm-amix" > + > + - reg : Offset and length of the register set for the device. > + > + - clocks : Must contain an entry for each entry in clock-names. > + > + - clock-names : Must include the "ipg" for register access. Humm, no audio related clocks? > + > + - power-domains : Must contain the phandle to the AMIX power domain node > + > +Device driver configuration example: > +====================================== > + amix: amix@59840000 { > + compatible = "fsl,imx8qm-amix"; > + reg = <0x0 0x59840000 0x0 0x10000>; > + clocks = <&clk IMX8QXP_AUD_AMIX_IPG>; > + clock-names = "ipg"; > + power-domains = <&pd_amix>; > + }; > +
Hi Rob, On Vi, 2018-12-28 at 17:32 -0600, Rob Herring wrote: > On Tue, Dec 18, 2018 at 04:30:01PM +0000, Viorel Suman wrote: > > > > This patch implements Audio Mixer CPU DAI driver for NXP iMX8 SOCs. > > The Audio Mixer is a on-chip functional module that allows mixing > > of > > two audio streams into a single audio stream. > > > > Audio Mixer datasheet is available here: > > https://www.nxp.com/docs/en/reference-manual/IMX8DQXPRM.pdf > > > > Signed-off-by: Viorel Suman <viorel.suman@nxp.com> > > --- > > .../devicetree/bindings/sound/fsl,amix.txt | 45 ++ > This should be a separate patch. Ok, thank you, will split this into several patches. > > > > > sound/soc/fsl/Kconfig | 7 + > > sound/soc/fsl/Makefile | 3 + > > sound/soc/fsl/fsl_amix.c | 554 > > +++++++++++++++++++++ > > sound/soc/fsl/fsl_amix.h | 101 ++++ > > 5 files changed, 710 insertions(+) > > create mode 100644 > > Documentation/devicetree/bindings/sound/fsl,amix.txt > > create mode 100644 sound/soc/fsl/fsl_amix.c > > create mode 100644 sound/soc/fsl/fsl_amix.h > > > > diff --git a/Documentation/devicetree/bindings/sound/fsl,amix.txt > > b/Documentation/devicetree/bindings/sound/fsl,amix.txt > > new file mode 100644 > > index 0000000..049144f > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/sound/fsl,amix.txt > > @@ -0,0 +1,45 @@ > > +NXP Audio Mixer (AMIX). > > + > > +The Audio Mixer is a on-chip functional module that allows mixing > > of two > > +audio streams into a single audio stream. Audio Mixer has two > > input serial > > +audio interfaces. These are driven by two Synchronous Audio > > interface > > +modules (SAI). Each input serial interface carries 8 audio > > channels in its > > +frame in TDM manner. Mixer mixes audio samples of corresponding > > channels > > +from two interfaces into a single sample. Before mixing, audio > > samples of > > +two inputs can be attenuated based on configuration. The output of > > the > > +Audio Mixer is also a serial audio interface. Like input > > interfaces it has > > +the same TDM frame format. This output is used to drive the serial > > DAC TDM > > +interface of audio codec and also sent to the external pins along > > with the > > +receive path of normal audio SAI module for readback by the CPU. > > + > > +The output of Audio mixer can be selected from any of the three > > streams > > + - serial audio input 1 > > + - serial audio input 2 > > + - Mixed audio > > + > > +Mixing operation is independent of audio sample rate but the two > > audio > > +input streams must have same audio sample rate with same number of > > channels > > +in TDM frame to be eligible for mixing. > > + > > +Device driver required properties: > > +================================= > > + - compatible : Compatible list, contains > > "fsl,imx8qm-amix" > > + > > + - reg : Offset and length of the register > > set for the device. > > + > > + - clocks : Must contain an entry for each entry > > in clock-names. > > + > > + - clock-names : Must include the "ipg" for > > register access. > Humm, no audio related clocks? Right, no audio related clocks - Audio Mixer operates on the clocks supplied by input Synchronous Audio Interfaces. > > > > > > + > > + - power-domains : Must contain the phandle to the AMIX > > power domain node > > + > > +Device driver configuration example: > > +====================================== > > + amix: amix@59840000 { > > + compatible = "fsl,imx8qm-amix"; > > + reg = <0x0 0x59840000 0x0 0x10000>; > > + clocks = <&clk IMX8QXP_AUD_AMIX_IPG>; > > + clock-names = "ipg"; > > + power-domains = <&pd_amix>; > > + }; > > + Regards, Viorel
Hi Nicolin, Thank you for your feedback, same here - just back from vacation. On Jo, 2018-12-27 at 01:24 +0800, Nicolin Chen wrote: > Hi Viorel, > > Sorry for the late response, having been on a long vacation. > > The code looks pretty clean. Just some small concerns/questions > below. > > On Wed, Dec 19, 2018 at 12:30 AM Viorel Suman <viorel.suman@nxp.com> > wrote: > > > > > > This patch implements Audio Mixer CPU DAI driver for NXP iMX8 SOCs. > > The Audio Mixer is a on-chip functional module that allows mixing > > of > > two audio streams into a single audio stream. > > > > Audio Mixer datasheet is available here: > > https://www.nxp.com/docs/en/reference-manual/IMX8DQXPRM.pdf > > > > Signed-off-by: Viorel Suman <viorel.suman@nxp.com> > > --- > > .../devicetree/bindings/sound/fsl,amix.txt | 45 ++ > > sound/soc/fsl/Kconfig | 7 + > > sound/soc/fsl/Makefile | 3 + > > sound/soc/fsl/fsl_amix.c | 554 > > +++++++++++++++++++++ > > sound/soc/fsl/fsl_amix.h | 101 ++++ > I aimn't against the naming here, but it seems to be AUDMIX in RM? > > Would it be better to align with that? It's your decision though. To me "AUDMIX" sounds more like some RTL high level integration module, I would prefer to keep it as it is if there is no strong reason to rename it. > > > > > diff --git a/Documentation/devicetree/bindings/sound/fsl,amix.txt > > b/Documentation/devicetree/bindings/sound/fsl,amix.txt > > +================================= > > + - compatible : Compatible list, contains "fsl,imx8qm- > > amix" > > + > > + - reg : Offset and length of the register > > set for the device. > > + > > + - clocks : Must contain an entry for each entry in > > clock-names. > > + > > + - clock-names : Must include the "ipg" for > > register access. > > + > > + - power-domains : Must contain the phandle to the AMIX > > power domain node > > + > > +Device driver configuration example: > > +====================================== > > + amix: amix@59840000 { > > + compatible = "fsl,imx8qm-amix"; > > + reg = <0x0 0x59840000 0x0 0x10000>; > > + clocks = <&clk IMX8QXP_AUD_AMIX_IPG>; > > + clock-names = "ipg"; > > + power-domains = <&pd_amix>; > > + }; > From the description of DT and RM, I don't see how it connects to > SAIs. > > Are they fixed to SAI0 and SAI1 in imx8qm? Wondering if it'd be > better to have such information in the doc. Please check chapter "16.1.2.2 Audio Mixer" in RM: it has two dedicated SAI interfaces, SAI4 and SAI5. Audio Mixer operates on bit clock of one of these interfaces. > > > > > diff --git a/sound/soc/fsl/fsl_amix.c b/sound/soc/fsl/fsl_amix.c > +static const char > + *width_sel[] = { "16b", "18b", "20b", "24b", "32b", }, > + *pol_sel[] = { "Positive edge", "Negative edge", }, > [...] > +static const struct soc_enum fsl_amix_enum[] = { > +/* FSL_AMIX_CTR enums */ > [...] > +SOC_ENUM_SINGLE_S(FSL_AMIX_CTR, FSL_AMIX_CTR_OUTWIDTH_SHIFT, > width_sel), > +SOC_ENUM_SINGLE_S(FSL_AMIX_CTR, FSL_AMIX_CTR_OUTCKPOL_SHIFT, > pol_sel), > > Should we handle the width in hw_param()? The width of AMIX output (mixed) stream may be different than the width of the input streams, the assumption is that the user may want to control it from userspace. > > Why do we change pol here? It feels like against set_fmt(). You're right, will remove it in the next version. > > > > > +static int fsl_amix_dai_set_fmt(struct snd_soc_dai *dai, unsigned > > int fmt) > > +{ > > + /* For playback the AMIX is slave, and for record is master > > */ > > + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { > > + case SND_SOC_DAIFMT_CBM_CFM: > > + case SND_SOC_DAIFMT_CBS_CFS: > So it's used either for playback or capture only, not both at same > time? From IP functional perspective AMIX capture is the result of AMIX playback - AMIX output represents the resulting mixed audio stream routed to SAI4 RX signals (bit & frame clocks and data). So once we have playback on either SAI4 or SAI5 (or both) - we can capture the AMIX output on SAI4. I guess it would be nice to send the machine driver as part of this patchset also - it defines two input SAI interfaces as frontends and AMIX - as backend. Userspace sees only two SAI interfaces exposed, both of them having playback enabled, and only SAI4 having capture enabled. > > Thanks > Nicolin Thank you, Viorel
On Thu, Jan 3, 2019 at 9:59 AM Viorel Suman <viorel.suman@nxp.com> wrote: > > Hi Nicolin, > > Thank you for your feedback, same here - just back from vacation. > > On Jo, 2018-12-27 at 01:24 +0800, Nicolin Chen wrote: > > Hi Viorel, > > > > Sorry for the late response, having been on a long vacation. > > > > The code looks pretty clean. Just some small concerns/questions > > below. > > > > On Wed, Dec 19, 2018 at 12:30 AM Viorel Suman <viorel.suman@nxp.com> > > wrote: > > > > > > > > > This patch implements Audio Mixer CPU DAI driver for NXP iMX8 SOCs. > > > The Audio Mixer is a on-chip functional module that allows mixing > > > of > > > two audio streams into a single audio stream. > > > > > > Audio Mixer datasheet is available here: > > > https://www.nxp.com/docs/en/reference-manual/IMX8DQXPRM.pdf > > > > > > Signed-off-by: Viorel Suman <viorel.suman@nxp.com> > > > --- > > > .../devicetree/bindings/sound/fsl,amix.txt | 45 ++ > > > sound/soc/fsl/Kconfig | 7 + > > > sound/soc/fsl/Makefile | 3 + > > > sound/soc/fsl/fsl_amix.c | 554 > > > +++++++++++++++++++++ > > > sound/soc/fsl/fsl_amix.h | 101 ++++ > > I aimn't against the naming here, but it seems to be AUDMIX in RM? > > > > Would it be better to align with that? It's your decision though. > > To me "AUDMIX" sounds more like some RTL high level integration module, > I would prefer to keep it as it is if there is no strong reason to > rename it. At least for compatible string names, matching what's in the RM or RTL is more appropriate. Where does "AMIX" come from? Rob
> -----Original Message----- > From: Rob Herring [mailto:robh+dt@kernel.org] > Sent: Thursday, January 3, 2019 8:26 PM > To: Viorel Suman <viorel.suman@nxp.com> > Cc: nicoleotsuka@gmail.com; dl-linux-imx <linux-imx@nxp.com>; linux- > kernel@vger.kernel.org; linuxppc-dev@lists.ozlabs.org; timur@kernel.org; > devicetree@vger.kernel.org; Xiubo.Lee@gmail.com; Fabio Estevam > <fabio.estevam@nxp.com>; broonie@kernel.org; mark.rutland@arm.com; > tiwai@suse.com; lgirdwood@gmail.com; Daniel Baluta > <daniel.baluta@nxp.com>; perex@perex.cz; alsa-devel@alsa-project.org > Subject: Re: [RFC PATCH] ASoC: fsl: Add Audio Mixer CPU DAI driver > > On Thu, Jan 3, 2019 at 9:59 AM Viorel Suman <viorel.suman@nxp.com> wrote: > > > > Hi Nicolin, > > > > Thank you for your feedback, same here - just back from vacation. > > > > On Jo, 2018-12-27 at 01:24 +0800, Nicolin Chen wrote: > > > Hi Viorel, > > > > > > Sorry for the late response, having been on a long vacation. > > > > > > The code looks pretty clean. Just some small concerns/questions > > > below. > > > > > > On Wed, Dec 19, 2018 at 12:30 AM Viorel Suman <viorel.suman@nxp.com> > > > wrote: > > > > > > > > > > > > This patch implements Audio Mixer CPU DAI driver for NXP iMX8 SOCs. > > > > The Audio Mixer is a on-chip functional module that allows mixing > > > > of two audio streams into a single audio stream. > > > > > > > > Audio Mixer datasheet is available here: > > > > https://www.nxp.com/docs/en/reference-manual/IMX8DQXPRM.pdf > > > > > > > > Signed-off-by: Viorel Suman <viorel.suman@nxp.com> > > > > --- > > > > .../devicetree/bindings/sound/fsl,amix.txt | 45 ++ > > > > sound/soc/fsl/Kconfig | 7 + > > > > sound/soc/fsl/Makefile | 3 + > > > > sound/soc/fsl/fsl_amix.c | 554 > > > > +++++++++++++++++++++ > > > > sound/soc/fsl/fsl_amix.h | 101 ++++ > > > I aimn't against the naming here, but it seems to be AUDMIX in RM? > > > > > > Would it be better to align with that? It's your decision though. > > > > To me "AUDMIX" sounds more like some RTL high level integration > > module, I would prefer to keep it as it is if there is no strong > > reason to rename it. > > At least for compatible string names, matching what's in the RM or RTL is more > appropriate. Where does "AMIX" come from? > > Rob There are places in RM where Audio Mixer is referred as "AMIX": 1. Page 33, "Table 2-6. Audio DMA Memory Map" 2. Page 259, "LPCG_AMIX_REGS" 3. Page 6816, "Table 16-1. ADMA Subsystem Modules" /Viorel
Hi, On Thu, Jan 03, 2019 at 03:56:46PM +0000, Viorel Suman wrote: > > > sound/soc/fsl/fsl_amix.c | 554 > > > +++++++++++++++++++++ > > > sound/soc/fsl/fsl_amix.h | 101 ++++ > > I aimn't against the naming here, but it seems to be AUDMIX in RM? > > > > Would it be better to align with that? It's your decision though. > > To me "AUDMIX" sounds more like some RTL high level integration module, > I would prefer to keep it as it is if there is no strong reason to > rename it. We had AUDMUX, so "AUDMIX" doesn't sound bad to me at all. The only reason that we are discussing this is because RM uses more "AUDMIX"s over "amix"s. I'd have chosen AUDMIX if I were you, yet not strongly as I said. And it looks like Rob is asking you to use AUDMIX in DT binding doc. > > > +Device driver configuration example: > > > +====================================== > > > + amix: amix@59840000 { > > > + compatible = "fsl,imx8qm-amix"; > > > + reg = <0x0 0x59840000 0x0 0x10000>; > > > + clocks = <&clk IMX8QXP_AUD_AMIX_IPG>; > > > + clock-names = "ipg"; > > > + power-domains = <&pd_amix>; > > > + }; > > From the description of DT and RM, I don't see how it connects to > > SAIs. > > > > Are they fixed to SAI0 and SAI1 in imx8qm? Wondering if it'd be > > better to have such information in the doc. > > Please check chapter "16.1.2.2 Audio Mixer" in RM: it has two dedicated > SAI interfaces, SAI4 and SAI5. Audio Mixer operates on bit clock of one > of these interfaces. OK. I am actually more wondering how you connect it with SAI on the software level: for imx8qm, SAI4/5 are used, but later SoCs might use other SAI blocks. So it might be necessary to indicate the connections in DT. > > > +static int fsl_amix_dai_set_fmt(struct snd_soc_dai *dai, unsigned > > > int fmt) > > > +{ > > > + /* For playback the AMIX is slave, and for record is master > > > */ > > > + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { > > > + case SND_SOC_DAIFMT_CBM_CFM: > > > + case SND_SOC_DAIFMT_CBS_CFS: > > So it's used either for playback or capture only, not both at same > > time? > > From IP functional perspective AMIX capture is the result of AMIX > playback - AMIX output represents the resulting mixed audio stream > routed to SAI4 RX signals (bit & frame clocks and data). So once we > have playback on either SAI4 or SAI5 (or both) - we can capture the > AMIX output on SAI4. Ah, it sounds like a looping block then, receiving bclk from SAI4 -- slave, and routing the bclk back to SAI4 -- master; SAI4 works at ASYNC mode? > I guess it would be nice to send the machine driver as part of this > patchset also - it defines two input SAI interfaces as frontends and > AMIX - as backend. Userspace sees only two SAI interfaces exposed, both > of them having playback enabled, and only SAI4 having capture enabled. DPCM? So you are having the links in the sound DT nodes, i.e. the machine driver? Thanks Nicolin
Hi Nicolin, On Jo, 2019-01-03 at 12:03 -0800, Nicolin Chen wrote: > Hi, > > On Thu, Jan 03, 2019 at 03:56:46PM +0000, Viorel Suman wrote: > > > > > > > > > > > > > sound/soc/fsl/fsl_amix.c | 554 > > > > +++++++++++++++++++++ > > > > sound/soc/fsl/fsl_amix.h | 101 ++++ > > > I aimn't against the naming here, but it seems to be AUDMIX in > > > RM? > > > > > > Would it be better to align with that? It's your decision though. > > To me "AUDMIX" sounds more like some RTL high level integration > > module, > > I would prefer to keep it as it is if there is no strong reason to > > rename it. > We had AUDMUX, so "AUDMIX" doesn't sound bad to me at all. The only > reason that we are discussing this is because RM uses more "AUDMIX"s > over "amix"s. I'd have chosen AUDMIX if I were you, yet not strongly > as I said. And it looks like Rob is asking you to use AUDMIX in DT > binding doc. Ok, I'll change in the next version the compatible string to "audmix" as Rob requested. > > > > > > > > > > > > > > +Device driver configuration example: > > > > +====================================== > > > > + amix: amix@59840000 { > > > > + compatible = "fsl,imx8qm-amix"; > > > > + reg = <0x0 0x59840000 0x0 0x10000>; > > > > + clocks = <&clk IMX8QXP_AUD_AMIX_IPG>; > > > > + clock-names = "ipg"; > > > > + power-domains = <&pd_amix>; > > > > + }; > > > From the description of DT and RM, I don't see how it connects to > > > SAIs. > > > > > > Are they fixed to SAI0 and SAI1 in imx8qm? Wondering if it'd be > > > better to have such information in the doc. > > Please check chapter "16.1.2.2 Audio Mixer" in RM: it has two > > dedicated > > SAI interfaces, SAI4 and SAI5. Audio Mixer operates on bit clock of > > one > > of these interfaces. > OK. I am actually more wondering how you connect it with SAI on > the software level: for imx8qm, SAI4/5 are used, but later SoCs > might use other SAI blocks. So it might be necessary to indicate > the connections in DT. See below. > > > > > > > > > > > > > > +static int fsl_amix_dai_set_fmt(struct snd_soc_dai *dai, > > > > unsigned > > > > int fmt) > > > > +{ > > > > + /* For playback the AMIX is slave, and for record is > > > > master > > > > */ > > > > + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { > > > > + case SND_SOC_DAIFMT_CBM_CFM: > > > > + case SND_SOC_DAIFMT_CBS_CFS: > > > So it's used either for playback or capture only, not both at > > > same > > > time? > > From IP functional perspective AMIX capture is the result of AMIX > > playback - AMIX output represents the resulting mixed audio stream > > routed to SAI4 RX signals (bit & frame clocks and data). So once we > > have playback on either SAI4 or SAI5 (or both) - we can capture the > > AMIX output on SAI4. > Ah, it sounds like a looping block then, receiving bclk from SAI4 > -- slave, and routing the bclk back to SAI4 -- master; SAI4 works > at ASYNC mode? Right. And yes, SAI4 works in ASYNC mode. > > > > > I guess it would be nice to send the machine driver as part of this > > patchset also - it defines two input SAI interfaces as frontends > > and > > AMIX - as backend. Userspace sees only two SAI interfaces exposed, > > both > > of them having playback enabled, and only SAI4 having capture > > enabled. > DPCM? So you are having the links in the sound DT nodes, i.e. the > machine driver? The machine driver DT configuration looks like: ================ sound-amix-sai { compatible = "fsl,imx-audio-amix"; model = "amix-audio-sai"; dais = <&sai4>, <&sai5>; amix-controller = <&amix>; }; The number of elements in "dais" array is at least two elements, DAPM routes are generated dynamically in machine driver at probe as function of number of SAI instances, the capture is enabled only for the first SAI instance in the list. > > Thanks > Nicolin Regards, Viorel
diff --git a/Documentation/devicetree/bindings/sound/fsl,amix.txt b/Documentation/devicetree/bindings/sound/fsl,amix.txt new file mode 100644 index 0000000..049144f --- /dev/null +++ b/Documentation/devicetree/bindings/sound/fsl,amix.txt @@ -0,0 +1,45 @@ +NXP Audio Mixer (AMIX). + +The Audio Mixer is a on-chip functional module that allows mixing of two +audio streams into a single audio stream. Audio Mixer has two input serial +audio interfaces. These are driven by two Synchronous Audio interface +modules (SAI). Each input serial interface carries 8 audio channels in its +frame in TDM manner. Mixer mixes audio samples of corresponding channels +from two interfaces into a single sample. Before mixing, audio samples of +two inputs can be attenuated based on configuration. The output of the +Audio Mixer is also a serial audio interface. Like input interfaces it has +the same TDM frame format. This output is used to drive the serial DAC TDM +interface of audio codec and also sent to the external pins along with the +receive path of normal audio SAI module for readback by the CPU. + +The output of Audio mixer can be selected from any of the three streams + - serial audio input 1 + - serial audio input 2 + - Mixed audio + +Mixing operation is independent of audio sample rate but the two audio +input streams must have same audio sample rate with same number of channels +in TDM frame to be eligible for mixing. + +Device driver required properties: +================================= + - compatible : Compatible list, contains "fsl,imx8qm-amix" + + - reg : Offset and length of the register set for the device. + + - clocks : Must contain an entry for each entry in clock-names. + + - clock-names : Must include the "ipg" for register access. + + - power-domains : Must contain the phandle to the AMIX power domain node + +Device driver configuration example: +====================================== + amix: amix@59840000 { + compatible = "fsl,imx8qm-amix"; + reg = <0x0 0x59840000 0x0 0x10000>; + clocks = <&clk IMX8QXP_AUD_AMIX_IPG>; + clock-names = "ipg"; + power-domains = <&pd_amix>; + }; + diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig index 2e75b5bc..0b08eb2 100644 --- a/sound/soc/fsl/Kconfig +++ b/sound/soc/fsl/Kconfig @@ -24,6 +24,13 @@ config SND_SOC_FSL_SAI This option is only useful for out-of-tree drivers since in-tree drivers select it automatically. +config SND_SOC_FSL_AMIX + tristate "Audio Mixer (AMIX) module support" + select REGMAP_MMIO + help + Say Y if you want to add Audio Mixer (AMIX) + support for the NXP iMX CPUs. + config SND_SOC_FSL_SSI tristate "Synchronous Serial Interface module (SSI) support" select SND_SOC_IMX_PCM_DMA if SND_IMX_SOC != n diff --git a/sound/soc/fsl/Makefile b/sound/soc/fsl/Makefile index de94fa0..3263634 100644 --- a/sound/soc/fsl/Makefile +++ b/sound/soc/fsl/Makefile @@ -12,6 +12,7 @@ snd-soc-p1022-rdk-objs := p1022_rdk.o obj-$(CONFIG_SND_SOC_P1022_RDK) += snd-soc-p1022-rdk.o # Freescale SSI/DMA/SAI/SPDIF Support +snd-soc-fsl-amix-objs := fsl_amix.o snd-soc-fsl-asoc-card-objs := fsl-asoc-card.o snd-soc-fsl-asrc-objs := fsl_asrc.o fsl_asrc_dma.o snd-soc-fsl-sai-objs := fsl_sai.o @@ -21,6 +22,8 @@ snd-soc-fsl-spdif-objs := fsl_spdif.o snd-soc-fsl-esai-objs := fsl_esai.o snd-soc-fsl-utils-objs := fsl_utils.o snd-soc-fsl-dma-objs := fsl_dma.o + +obj-$(CONFIG_SND_SOC_FSL_AMIX) += snd-soc-fsl-amix.o obj-$(CONFIG_SND_SOC_FSL_ASOC_CARD) += snd-soc-fsl-asoc-card.o obj-$(CONFIG_SND_SOC_FSL_ASRC) += snd-soc-fsl-asrc.o obj-$(CONFIG_SND_SOC_FSL_SAI) += snd-soc-fsl-sai.o diff --git a/sound/soc/fsl/fsl_amix.c b/sound/soc/fsl/fsl_amix.c new file mode 100644 index 0000000..d752029 --- /dev/null +++ b/sound/soc/fsl/fsl_amix.c @@ -0,0 +1,554 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * NXP AMIX ALSA SoC Digital Audio Interface (DAI) driver + * + * Copyright 2017 NXP + */ + +#include <linux/clk.h> +#include <linux/module.h> +#include <linux/of_platform.h> +#include <linux/pm_runtime.h> +#include <sound/soc.h> +#include <sound/pcm_params.h> + +#include "fsl_amix.h" + +#define SOC_ENUM_SINGLE_S(xreg, xshift, xtexts) \ + SOC_ENUM_SINGLE(xreg, xshift, ARRAY_SIZE(xtexts), xtexts) + +static const char + *tdm_sel[] = { "TDM1", "TDM2", }, + *mode_sel[] = { "Disabled", "TDM1", "TDM2", "Mixed", }, + *width_sel[] = { "16b", "18b", "20b", "24b", "32b", }, + *pol_sel[] = { "Positive edge", "Negative edge", }, + *endis_sel[] = { "Disabled", "Enabled", }, + *updn_sel[] = { "Downward", "Upward", }, + *mask_sel[] = { "Unmask", "Mask", }; + +static const struct soc_enum fsl_amix_enum[] = { +/* FSL_AMIX_CTR enums */ +SOC_ENUM_SINGLE_S(FSL_AMIX_CTR, FSL_AMIX_CTR_MIXCLK_SHIFT, tdm_sel), +SOC_ENUM_SINGLE_S(FSL_AMIX_CTR, FSL_AMIX_CTR_OUTSRC_SHIFT, mode_sel), +SOC_ENUM_SINGLE_S(FSL_AMIX_CTR, FSL_AMIX_CTR_OUTWIDTH_SHIFT, width_sel), +SOC_ENUM_SINGLE_S(FSL_AMIX_CTR, FSL_AMIX_CTR_OUTCKPOL_SHIFT, pol_sel), +SOC_ENUM_SINGLE_S(FSL_AMIX_CTR, FSL_AMIX_CTR_MASKRTDF_SHIFT, mask_sel), +SOC_ENUM_SINGLE_S(FSL_AMIX_CTR, FSL_AMIX_CTR_MASKCKDF_SHIFT, mask_sel), +SOC_ENUM_SINGLE_S(FSL_AMIX_CTR, FSL_AMIX_CTR_SYNCMODE_SHIFT, endis_sel), +SOC_ENUM_SINGLE_S(FSL_AMIX_CTR, FSL_AMIX_CTR_SYNCSRC_SHIFT, tdm_sel), +/* FSL_AMIX_ATCR0 enums */ +SOC_ENUM_SINGLE_S(FSL_AMIX_ATCR0, 0, endis_sel), +SOC_ENUM_SINGLE_S(FSL_AMIX_ATCR0, 1, updn_sel), +/* FSL_AMIX_ATCR1 enums */ +SOC_ENUM_SINGLE_S(FSL_AMIX_ATCR1, 0, endis_sel), +SOC_ENUM_SINGLE_S(FSL_AMIX_ATCR1, 1, updn_sel), +}; + +struct fsl_amix_state { + u8 tdms; + u8 clk; + char msg[64]; +}; + +static const struct fsl_amix_state prms[4][4] = {{ + /* DIS->DIS, do nothing */ + { .tdms = 0, .clk = 0, .msg = "" }, + /* DIS->TDM1*/ + { .tdms = 1, .clk = 1, .msg = "DIS->TDM1: TDM1 not started!\n" }, + /* DIS->TDM2*/ + { .tdms = 2, .clk = 2, .msg = "DIS->TDM2: TDM2 not started!\n" }, + /* DIS->MIX */ + { .tdms = 3, .clk = 0, .msg = "DIS->MIX: Please start both TDMs!\n" } +}, { /* TDM1->DIS */ + { .tdms = 1, .clk = 0, .msg = "TDM1->DIS: TDM1 not started!\n" }, + /* TDM1->TDM1, do nothing */ + { .tdms = 0, .clk = 0, .msg = "" }, + /* TDM1->TDM2 */ + { .tdms = 3, .clk = 2, .msg = "TDM1->TDM2: Please start both TDMs!\n" }, + /* TDM1->MIX */ + { .tdms = 3, .clk = 0, .msg = "TDM1->MIX: Please start both TDMs!\n" } +}, { /* TDM2->DIS */ + { .tdms = 2, .clk = 0, .msg = "TDM2->DIS: TDM2 not started!\n" }, + /* TDM2->TDM1 */ + { .tdms = 3, .clk = 1, .msg = "TDM2->TDM1: Please start both TDMs!\n" }, + /* TDM2->TDM2, do nothing */ + { .tdms = 0, .clk = 0, .msg = "" }, + /* TDM2->MIX */ + { .tdms = 3, .clk = 0, .msg = "TDM2->MIX: Please start both TDMs!\n" } +}, { /* MIX->DIS */ + { .tdms = 3, .clk = 0, .msg = "MIX->DIS: Please start both TDMs!\n" }, + /* MIX->TDM1 */ + { .tdms = 3, .clk = 1, .msg = "MIX->TDM1: Please start both TDMs!\n" }, + /* MIX->TDM2 */ + { .tdms = 3, .clk = 2, .msg = "MIX->TDM2: Please start both TDMs!\n" }, + /* MIX->MIX, do nothing */ + { .tdms = 0, .clk = 0, .msg = "" } +}, }; + +static int fsl_amix_state_trans(struct snd_soc_component *comp, + unsigned int *mask, unsigned int *ctr, + const struct fsl_amix_state prm) +{ + struct fsl_amix *priv = snd_soc_component_get_drvdata(comp); + /* Enforce all required TDMs are started */ + if ((priv->tdms & prm.tdms) != prm.tdms) { + dev_dbg(comp->dev, prm.msg); + return -EINVAL; + } + + switch (prm.clk) { + case 1: + case 2: + /* Set mix clock */ + (*mask) |= FSL_AMIX_CTR_MIXCLK_MASK; + (*ctr) |= FSL_AMIX_CTR_MIXCLK(prm.clk - 1); + break; + default: + break; + } + + return 0; +} + +static int fsl_amix_put_mix_clk_src(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *comp = snd_kcontrol_chip(kcontrol); + struct fsl_amix *priv = snd_soc_component_get_drvdata(comp); + struct soc_enum *e = (struct soc_enum *)kcontrol->private_value; + unsigned int *item = ucontrol->value.enumerated.item; + unsigned int reg_val, val, mix_clk; + int ret = 0; + + /* Get current state */ + ret = snd_soc_component_read(comp, FSL_AMIX_CTR, ®_val); + if (ret) + return ret; + + mix_clk = ((reg_val & FSL_AMIX_CTR_MIXCLK_MASK) + >> FSL_AMIX_CTR_MIXCLK_SHIFT); + val = snd_soc_enum_item_to_val(e, item[0]); + + dev_dbg(comp->dev, "TDMs=x%08x, val=x%08x\n", priv->tdms, val); + + /** + * Ensure the current selected mixer clock is available + * for configuration propagation + */ + if (!(priv->tdms & BIT(mix_clk))) { + dev_err(comp->dev, + "Started TDM%d needed for config propagation!\n", + mix_clk + 1); + return -EINVAL; + } + + if (!(priv->tdms & BIT(val))) { + dev_err(comp->dev, + "The selected clock source has no TDM%d enabled!\n", + val + 1); + return -EINVAL; + } + + return snd_soc_put_enum_double(kcontrol, ucontrol); +} + +static int fsl_amix_put_out_src(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *comp = snd_kcontrol_chip(kcontrol); + struct fsl_amix *priv = snd_soc_component_get_drvdata(comp); + struct soc_enum *e = (struct soc_enum *)kcontrol->private_value; + unsigned int *item = ucontrol->value.enumerated.item; + u32 out_src, mix_clk; + unsigned int reg_val, val, mask = 0, ctr = 0; + int ret = 0; + + /* Get current state */ + ret = snd_soc_component_read(comp, FSL_AMIX_CTR, ®_val); + if (ret) + return ret; + + /* "From" state */ + out_src = ((reg_val & FSL_AMIX_CTR_OUTSRC_MASK) + >> FSL_AMIX_CTR_OUTSRC_SHIFT); + mix_clk = ((reg_val & FSL_AMIX_CTR_MIXCLK_MASK) + >> FSL_AMIX_CTR_MIXCLK_SHIFT); + + /* "To" state */ + val = snd_soc_enum_item_to_val(e, item[0]); + + dev_dbg(comp->dev, "TDMs=x%08x, val=x%08x\n", priv->tdms, val); + + /* Check if state is changing ... */ + if (out_src == val) + return 0; + /** + * Ensure the current selected mixer clock is available + * for configuration propagation + */ + if (!(priv->tdms & BIT(mix_clk))) { + dev_err(comp->dev, + "Started TDM%d needed for config propagation!\n", + mix_clk + 1); + return -EINVAL; + } + + /* Check state transition constraints */ + ret = fsl_amix_state_trans(comp, &mask, &ctr, prms[out_src][val]); + if (ret) + return ret; + + /* Complete transition to new state */ + mask |= FSL_AMIX_CTR_OUTSRC_MASK; + ctr |= FSL_AMIX_CTR_OUTSRC(val); + + return snd_soc_component_update_bits(comp, FSL_AMIX_CTR, mask, ctr); +} + +static const struct snd_kcontrol_new fsl_amix_snd_controls[] = { + /* FSL_AMIX_CTR controls */ + SOC_ENUM_EXT("Mixing Clock Source", fsl_amix_enum[0], + snd_soc_get_enum_double, fsl_amix_put_mix_clk_src), + SOC_ENUM_EXT("Output Source", fsl_amix_enum[1], + snd_soc_get_enum_double, fsl_amix_put_out_src), + SOC_ENUM("Output Width", fsl_amix_enum[2]), + SOC_ENUM("Output Clock Polarity", fsl_amix_enum[3]), + SOC_ENUM("Frame Rate Diff Error", fsl_amix_enum[4]), + SOC_ENUM("Clock Freq Diff Error", fsl_amix_enum[5]), + SOC_ENUM("Sync Mode Config", fsl_amix_enum[6]), + SOC_ENUM("Sync Mode Clk Source", fsl_amix_enum[7]), + /* TDM1 Attenuation controls */ + SOC_ENUM("TDM1 Attenuation", fsl_amix_enum[8]), + SOC_ENUM("TDM1 Attenuation Direction", fsl_amix_enum[9]), + SOC_SINGLE("TDM1 Attenuation Step Divider", FSL_AMIX_ATCR0, + 2, 0x00fff, 0), + SOC_SINGLE("TDM1 Attenuation Initial Value", FSL_AMIX_ATIVAL0, + 0, 0x3ffff, 0), + SOC_SINGLE("TDM1 Attenuation Step Up Factor", FSL_AMIX_ATSTPUP0, + 0, 0x3ffff, 0), + SOC_SINGLE("TDM1 Attenuation Step Down Factor", FSL_AMIX_ATSTPDN0, + 0, 0x3ffff, 0), + SOC_SINGLE("TDM1 Attenuation Step Target", FSL_AMIX_ATSTPTGT0, + 0, 0x3ffff, 0), + /* TDM2 Attenuation controls */ + SOC_ENUM("TDM2 Attenuation", fsl_amix_enum[10]), + SOC_ENUM("TDM2 Attenuation Direction", fsl_amix_enum[11]), + SOC_SINGLE("TDM2 Attenuation Step Divider", FSL_AMIX_ATCR1, + 2, 0x00fff, 0), + SOC_SINGLE("TDM2 Attenuation Initial Value", FSL_AMIX_ATIVAL1, + 0, 0x3ffff, 0), + SOC_SINGLE("TDM2 Attenuation Step Up Factor", FSL_AMIX_ATSTPUP1, + 0, 0x3ffff, 0), + SOC_SINGLE("TDM2 Attenuation Step Down Factor", FSL_AMIX_ATSTPDN1, + 0, 0x3ffff, 0), + SOC_SINGLE("TDM2 Attenuation Step Target", FSL_AMIX_ATSTPTGT1, + 0, 0x3ffff, 0), +}; + +static int fsl_amix_dai_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) +{ + struct snd_soc_component *comp = dai->component; + u32 mask = 0, ctr = 0; + + /* AMIX is working in DSP_A format only */ + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_DSP_A: + break; + default: + return -EINVAL; + } + + /* For playback the AMIX is slave, and for record is master */ + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + case SND_SOC_DAIFMT_CBS_CFS: + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_IB_NF: + /* Output data will be written on positive edge of the clock */ + ctr |= FSL_AMIX_CTR_OUTCKPOL(0); + break; + case SND_SOC_DAIFMT_NB_NF: + /* Output data will be written on negative edge of the clock */ + ctr |= FSL_AMIX_CTR_OUTCKPOL(1); + break; + default: + return -EINVAL; + } + + mask |= FSL_AMIX_CTR_OUTCKPOL_MASK; + + return snd_soc_component_update_bits(comp, FSL_AMIX_CTR, mask, ctr); +} + +static int fsl_amix_dai_trigger(struct snd_pcm_substream *substream, int cmd, + struct snd_soc_dai *dai) +{ + struct fsl_amix *priv = snd_soc_dai_get_drvdata(dai); + + /* Capture stream shall not be handled */ + if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) + return 0; + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + priv->tdms |= BIT(dai->driver->id); + break; + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_SUSPEND: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + priv->tdms &= ~BIT(dai->driver->id); + break; + default: + return -EINVAL; + } + + return 0; +} + +static const struct snd_soc_dai_ops fsl_amix_dai_ops = { + .set_fmt = fsl_amix_dai_set_fmt, + .trigger = fsl_amix_dai_trigger, +}; + +static struct snd_soc_dai_driver fsl_amix_dai[] = { + { + .id = 0, + .name = "amix-0", + .playback = { + .stream_name = "AMIX-Playback-0", + .channels_min = 8, + .channels_max = 8, + .rate_min = 8000, + .rate_max = 96000, + .rates = SNDRV_PCM_RATE_8000_96000, + .formats = FSL_AMIX_FORMATS, + }, + .capture = { + .stream_name = "AMIX-Capture-0", + .channels_min = 8, + .channels_max = 8, + .rate_min = 8000, + .rate_max = 96000, + .rates = SNDRV_PCM_RATE_8000_96000, + .formats = FSL_AMIX_FORMATS, + }, + .ops = &fsl_amix_dai_ops, + }, + { + .id = 1, + .name = "amix-1", + .playback = { + .stream_name = "AMIX-Playback-1", + .channels_min = 8, + .channels_max = 8, + .rate_min = 8000, + .rate_max = 96000, + .rates = SNDRV_PCM_RATE_8000_96000, + .formats = FSL_AMIX_FORMATS, + }, + .capture = { + .stream_name = "AMIX-Capture-1", + .channels_min = 8, + .channels_max = 8, + .rate_min = 8000, + .rate_max = 96000, + .rates = SNDRV_PCM_RATE_8000_96000, + .formats = FSL_AMIX_FORMATS, + }, + .ops = &fsl_amix_dai_ops, + }, +}; + +static const struct snd_soc_component_driver fsl_amix_component = { + .name = "fsl-amix-dai", + .controls = fsl_amix_snd_controls, + .num_controls = ARRAY_SIZE(fsl_amix_snd_controls), +}; + +static bool fsl_amix_readable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case FSL_AMIX_CTR: + case FSL_AMIX_STR: + case FSL_AMIX_ATCR0: + case FSL_AMIX_ATIVAL0: + case FSL_AMIX_ATSTPUP0: + case FSL_AMIX_ATSTPDN0: + case FSL_AMIX_ATSTPTGT0: + case FSL_AMIX_ATTNVAL0: + case FSL_AMIX_ATSTP0: + case FSL_AMIX_ATCR1: + case FSL_AMIX_ATIVAL1: + case FSL_AMIX_ATSTPUP1: + case FSL_AMIX_ATSTPDN1: + case FSL_AMIX_ATSTPTGT1: + case FSL_AMIX_ATTNVAL1: + case FSL_AMIX_ATSTP1: + return true; + default: + return false; + } +} + +static bool fsl_amix_writeable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case FSL_AMIX_CTR: + case FSL_AMIX_ATCR0: + case FSL_AMIX_ATIVAL0: + case FSL_AMIX_ATSTPUP0: + case FSL_AMIX_ATSTPDN0: + case FSL_AMIX_ATSTPTGT0: + case FSL_AMIX_ATCR1: + case FSL_AMIX_ATIVAL1: + case FSL_AMIX_ATSTPUP1: + case FSL_AMIX_ATSTPDN1: + case FSL_AMIX_ATSTPTGT1: + return true; + default: + return false; + } +} + +static const struct reg_default fsl_amix_reg[] = { + { FSL_AMIX_CTR, 0x00060 }, + { FSL_AMIX_STR, 0x00003 }, + { FSL_AMIX_ATCR0, 0x00000 }, + { FSL_AMIX_ATIVAL0, 0x3FFFF }, + { FSL_AMIX_ATSTPUP0, 0x2AAAA }, + { FSL_AMIX_ATSTPDN0, 0x30000 }, + { FSL_AMIX_ATSTPTGT0, 0x00010 }, + { FSL_AMIX_ATTNVAL0, 0x00000 }, + { FSL_AMIX_ATSTP0, 0x00000 }, + { FSL_AMIX_ATCR1, 0x00000 }, + { FSL_AMIX_ATIVAL1, 0x3FFFF }, + { FSL_AMIX_ATSTPUP1, 0x2AAAA }, + { FSL_AMIX_ATSTPDN1, 0x30000 }, + { FSL_AMIX_ATSTPTGT1, 0x00010 }, + { FSL_AMIX_ATTNVAL1, 0x00000 }, + { FSL_AMIX_ATSTP1, 0x00000 }, +}; + +static const struct regmap_config fsl_amix_regmap_config = { + .reg_bits = 32, + .reg_stride = 4, + .val_bits = 32, + .max_register = FSL_AMIX_ATSTP1, + .reg_defaults = fsl_amix_reg, + .num_reg_defaults = ARRAY_SIZE(fsl_amix_reg), + .readable_reg = fsl_amix_readable_reg, + .writeable_reg = fsl_amix_writeable_reg, + .cache_type = REGCACHE_FLAT, +}; + +static int fsl_amix_probe(struct platform_device *pdev) +{ + struct fsl_amix *priv; + struct resource *res; + void __iomem *regs; + int ret; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->pdev = pdev; + + /* Get the addresses */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(regs)) + return PTR_ERR(regs); + + priv->regmap = devm_regmap_init_mmio_clk(&pdev->dev, "ipg", regs, + &fsl_amix_regmap_config); + if (IS_ERR(priv->regmap)) { + dev_err(&pdev->dev, "failed to init regmap\n"); + return PTR_ERR(priv->regmap); + } + + priv->ipg_clk = devm_clk_get(&pdev->dev, "ipg"); + if (IS_ERR(priv->ipg_clk)) { + dev_err(&pdev->dev, "failed to get ipg clock\n"); + return PTR_ERR(priv->ipg_clk); + } + + platform_set_drvdata(pdev, priv); + pm_runtime_enable(&pdev->dev); + + ret = devm_snd_soc_register_component(&pdev->dev, &fsl_amix_component, + fsl_amix_dai, + ARRAY_SIZE(fsl_amix_dai)); + if (ret) { + dev_err(&pdev->dev, "failed to register ASoC DAI\n"); + return ret; + } + + return 0; +} + +#ifdef CONFIG_PM +static int fsl_amix_runtime_resume(struct device *dev) +{ + struct fsl_amix *priv = dev_get_drvdata(dev); + int ret; + + ret = clk_prepare_enable(priv->ipg_clk); + if (ret) { + dev_err(dev, "Failed to enable IPG clock: %d\n", ret); + return ret; + } + + regcache_cache_only(priv->regmap, false); + regcache_mark_dirty(priv->regmap); + + return regcache_sync(priv->regmap); +} + +static int fsl_amix_runtime_suspend(struct device *dev) +{ + struct fsl_amix *priv = dev_get_drvdata(dev); + + regcache_cache_only(priv->regmap, true); + + clk_disable_unprepare(priv->ipg_clk); + + return 0; +} +#endif /* CONFIG_PM */ + +static const struct dev_pm_ops fsl_amix_pm = { + SET_RUNTIME_PM_OPS(fsl_amix_runtime_suspend, + fsl_amix_runtime_resume, + NULL) + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) +}; + +static const struct of_device_id fsl_amix_ids[] = { + { .compatible = "fsl,imx8qm-amix", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, fsl_amix_ids); + +static struct platform_driver fsl_amix_driver = { + .probe = fsl_amix_probe, + .driver = { + .name = "fsl-amix", + .of_match_table = fsl_amix_ids, + .pm = &fsl_amix_pm, + }, +}; +module_platform_driver(fsl_amix_driver); + +MODULE_DESCRIPTION("NXP AMIX ASoC DAI driver"); +MODULE_AUTHOR("Viorel Suman <viorel.suman@nxp.com>"); +MODULE_ALIAS("platform:fsl-amix"); +MODULE_LICENSE("GPL v2"); diff --git a/sound/soc/fsl/fsl_amix.h b/sound/soc/fsl/fsl_amix.h new file mode 100644 index 0000000..5312683 --- /dev/null +++ b/sound/soc/fsl/fsl_amix.h @@ -0,0 +1,101 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * NXP AMIX ALSA SoC Digital Audio Interface (DAI) driver + * + * Copyright 2017 NXP + */ + +#ifndef __FSL_AMIX_H +#define __FSL_AMIX_H + +#define FSL_AMIX_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\ + SNDRV_PCM_FMTBIT_S24_LE |\ + SNDRV_PCM_FMTBIT_S32_LE) +/* AMIX Registers */ +#define FSL_AMIX_CTR 0x200 /* Control */ +#define FSL_AMIX_STR 0x204 /* Status */ + +#define FSL_AMIX_ATCR0 0x208 /* Attenuation Control */ +#define FSL_AMIX_ATIVAL0 0x20c /* Attenuation Initial Value */ +#define FSL_AMIX_ATSTPUP0 0x210 /* Attenuation step up factor */ +#define FSL_AMIX_ATSTPDN0 0x214 /* Attenuation step down factor */ +#define FSL_AMIX_ATSTPTGT0 0x218 /* Attenuation step target */ +#define FSL_AMIX_ATTNVAL0 0x21c /* Attenuation Value */ +#define FSL_AMIX_ATSTP0 0x220 /* Attenuation step number */ + +#define FSL_AMIX_ATCR1 0x228 /* Attenuation Control */ +#define FSL_AMIX_ATIVAL1 0x22c /* Attenuation Initial Value */ +#define FSL_AMIX_ATSTPUP1 0x230 /* Attenuation step up factor */ +#define FSL_AMIX_ATSTPDN1 0x234 /* Attenuation step down factor */ +#define FSL_AMIX_ATSTPTGT1 0x238 /* Attenuation step target */ +#define FSL_AMIX_ATTNVAL1 0x23c /* Attenuation Value */ +#define FSL_AMIX_ATSTP1 0x240 /* Attenuation step number */ + +/* AMIX Control Register */ +#define FSL_AMIX_CTR_MIXCLK_SHIFT 0 +#define FSL_AMIX_CTR_MIXCLK_MASK BIT(FSL_AMIX_CTR_MIXCLK_SHIFT) +#define FSL_AMIX_CTR_MIXCLK(i) ((i) << FSL_AMIX_CTR_MIXCLK_SHIFT) +#define FSL_AMIX_CTR_OUTSRC_SHIFT 1 +#define FSL_AMIX_CTR_OUTSRC_MASK (0x3 << FSL_AMIX_CTR_OUTSRC_SHIFT) +#define FSL_AMIX_CTR_OUTSRC(i) (((i) << FSL_AMIX_CTR_OUTSRC_SHIFT) \ + & FSL_AMIX_CTR_OUTSRC_MASK) +#define FSL_AMIX_CTR_OUTWIDTH_SHIFT 3 +#define FSL_AMIX_CTR_OUTWIDTH_MASK (0x7 << FSL_AMIX_CTR_OUTWIDTH_SHIFT) +#define FSL_AMIX_CTR_OUTWIDTH(i) (((i) << FSL_AMIX_CTR_OUTWIDTH_SHIFT) \ + & FSL_AMIX_CTR_OUTWIDTH_MASK) +#define FSL_AMIX_CTR_OUTCKPOL_SHIFT 6 +#define FSL_AMIX_CTR_OUTCKPOL_MASK BIT(FSL_AMIX_CTR_OUTCKPOL_SHIFT) +#define FSL_AMIX_CTR_OUTCKPOL(i) ((i) << FSL_AMIX_CTR_OUTCKPOL_SHIFT) +#define FSL_AMIX_CTR_MASKRTDF_SHIFT 7 +#define FSL_AMIX_CTR_MASKRTDF_MASK BIT(FSL_AMIX_CTR_MASKRTDF_SHIFT) +#define FSL_AMIX_CTR_MASKRTDF(i) ((i) << FSL_AMIX_CTR_MASKRTDF_SHIFT) +#define FSL_AMIX_CTR_MASKCKDF_SHIFT 8 +#define FSL_AMIX_CTR_MASKCKDF_MASK BIT(FSL_AMIX_CTR_MASKCKDF_SHIFT) +#define FSL_AMIX_CTR_MASKCKDF(i) ((i) << FSL_AMIX_CTR_MASKCKDF_SHIFT) +#define FSL_AMIX_CTR_SYNCMODE_SHIFT 9 +#define FSL_AMIX_CTR_SYNCMODE_MASK BIT(FSL_AMIX_CTR_SYNCMODE_SHIFT) +#define FSL_AMIX_CTR_SYNCMODE(i) ((i) << FSL_AMIX_CTR_SYNCMODE_SHIFT) +#define FSL_AMIX_CTR_SYNCSRC_SHIFT 10 +#define FSL_AMIX_CTR_SYNCSRC_MASK BIT(FSL_AMIX_CTR_SYNCSRC_SHIFT) +#define FSL_AMIX_CTR_SYNCSRC(i) ((i) << FSL_AMIX_CTR_SYNCSRC_SHIFT) + +/* AMIX Status Register */ +#define FSL_AMIX_STR_RATEDIFF BIT(0) +#define FSL_AMIX_STR_CLKDIFF BIT(1) +#define FSL_AMIX_STR_MIXSTAT_SHIFT 2 +#define FSL_AMIX_STR_MIXSTAT_MASK (0x3 << FSL_AMIX_STR_MIXSTAT_SHIFT) +#define FSL_AMIX_STR_MIXSTAT(i) ((i & FSL_AMIX_STR_MIXSTAT_MASK) \ + >> FSL_AMIX_STR_MIXSTAT_SHIFT) +/* AMIX Attenuation Control Register */ +#define FSL_AMIX_ATCR_AT_EN BIT(0) +#define FSL_AMIX_ATCR_AT_UPDN BIT(1) +#define FSL_AMIX_ATCR_ATSTPDIF_SHIFT 2 +#define FSL_AMIX_ATCR_ATSTPDFI_MASK (0xfff << FSL_AMIX_ATCR_ATSTPDIF_SHIFT) + +/* AMIX Attenuation Initial Value Register */ +#define FSL_AMIX_ATIVAL_ATINVAL_MASK 0x3FFFF + +/* AMIX Attenuation Step Up Factor Register */ +#define FSL_AMIX_ATSTPUP_ATSTEPUP_MASK 0x3FFFF + +/* AMIX Attenuation Step Down Factor Register */ +#define FSL_AMIX_ATSTPDN_ATSTEPDN_MASK 0x3FFFF + +/* AMIX Attenuation Step Target Register */ +#define FSL_AMIX_ATSTPTGT_ATSTPTG_MASK 0x3FFFF + +/* AMIX Attenuation Value Register */ +#define FSL_AMIX_ATTNVAL_ATCURVAL_MASK 0x3FFFF + +/* AMIX Attenuation Step Number Register */ +#define FSL_AMIX_ATSTP_STPCTR_MASK 0x3FFFF + +#define FSL_AMIX_MAX_DAIS 2 +struct fsl_amix { + struct platform_device *pdev; + struct regmap *regmap; + struct clk *ipg_clk; + u8 tdms; +}; + +#endif /* __FSL_AMIX_H */
This patch implements Audio Mixer CPU DAI driver for NXP iMX8 SOCs. The Audio Mixer is a on-chip functional module that allows mixing of two audio streams into a single audio stream. Audio Mixer datasheet is available here: https://www.nxp.com/docs/en/reference-manual/IMX8DQXPRM.pdf Signed-off-by: Viorel Suman <viorel.suman@nxp.com> --- .../devicetree/bindings/sound/fsl,amix.txt | 45 ++ sound/soc/fsl/Kconfig | 7 + sound/soc/fsl/Makefile | 3 + sound/soc/fsl/fsl_amix.c | 554 +++++++++++++++++++++ sound/soc/fsl/fsl_amix.h | 101 ++++ 5 files changed, 710 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/fsl,amix.txt create mode 100644 sound/soc/fsl/fsl_amix.c create mode 100644 sound/soc/fsl/fsl_amix.h