Message ID | 20190108060426.11581-3-ran.wang_1@nxp.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | [1/3] usb: kconfig: remove dependency FSL_SOC for ehci fsl driver | expand |
On Tue, Jan 08, 2019 at 06:04:29AM +0000, Ran Wang wrote: > From: yinbo.zhu <yinbo.zhu@nxp.com> I doubt Yinbo's name has a "." in it :) Can you please fix this up to have the correct name here? > Remove USB errata checking code from driver. Applicability of erratum > is retrieved by reading corresponding property in device tree. > This property is written during device tree fixup. > > Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> > Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> > Signed-off-by: yinbo.zhu <yinbo.zhu@nxp.com> And here. thanks, greg k-h
On Tue, 8 Jan 2019, Ran Wang wrote: > From: yinbo.zhu <yinbo.zhu@nxp.com> > > Remove USB errata checking code from driver. Applicability of erratum > is retrieved by reading corresponding property in device tree. > This property is written during device tree fixup. > > Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> > Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> > Signed-off-by: yinbo.zhu <yinbo.zhu@nxp.com> > Signed-off-by: Ran Wang <ran.wang_1@nxp.com> > --- > drivers/usb/host/ehci-fsl.c | 7 +------ > drivers/usb/host/fsl-mph-dr-of.c | 6 ++++++ > include/linux/fsl_devices.h | 7 ++++--- > 3 files changed, 11 insertions(+), 9 deletions(-) > > diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c > index 59ebe1b..2aa408a 100644 > --- a/drivers/usb/host/ehci-fsl.c > +++ b/drivers/usb/host/ehci-fsl.c > @@ -304,14 +304,9 @@ static int ehci_fsl_usb_setup(struct ehci_hcd *ehci) > return -EINVAL; > > if (pdata->operating_mode == FSL_USB2_MPH_HOST) { > - unsigned int chip, rev, svr; > - > - svr = mfspr(SPRN_SVR); > - chip = svr >> 16; > - rev = (svr >> 4) & 0xf; > > /* Deal with USB Erratum #14 on MPC834x Rev 1.0 & 1.1 chips */ > - if ((rev == 1) && (chip >= 0x8050) && (chip <= 0x8055)) > + if (pdata->has_fsl_erratum_14 == 1) > ehci->has_fsl_port_bug = 1; > > if (pdata->port_enables & FSL_USB2_PORT0_ENABLED) > diff --git a/drivers/usb/host/fsl-mph-dr-of.c b/drivers/usb/host/fsl-mph-dr-of.c > index 677f9d5..4f8b8a0 100644 > --- a/drivers/usb/host/fsl-mph-dr-of.c > +++ b/drivers/usb/host/fsl-mph-dr-of.c > @@ -225,6 +225,12 @@ static int fsl_usb2_mph_dr_of_probe(struct platform_device *ofdev) > pdata->has_fsl_erratum_a005697 = > of_property_read_bool(np, "fsl,usb_erratum-a005697"); > > + if (of_get_property(np, "fsl,usb_erratum_14", NULL)) > + pdata->has_fsl_erratum_14 = 1; > + else > + pdata->has_fsl_erratum_14 = 0; > + > + > /* > * Determine whether phy_clk_valid needs to be checked > * by reading property in device tree > diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h > index 60cef82..7aa51bc 100644 > --- a/include/linux/fsl_devices.h > +++ b/include/linux/fsl_devices.h > @@ -98,10 +98,11 @@ struct fsl_usb2_platform_data { > > unsigned suspended:1; > unsigned already_suspended:1; > - unsigned has_fsl_erratum_a007792:1; > - unsigned has_fsl_erratum_a005275:1; > + unsigned has_fsl_erratum_a007792:1; > + unsigned has_fsl_erratum_14:1; > + unsigned has_fsl_erratum_a005275:1; > unsigned has_fsl_erratum_a005697:1; > - unsigned check_phy_clk_valid:1; > + unsigned check_phy_clk_valid:1; You are using spaces here instead of tabs, which alters the alignment. Don't do that. Alan Stern > > /* register save area for suspend/resume */ > u32 pm_command;
Hi yinbo.zhu, Thank you for the patch! Yet something to improve: [auto build test ERROR on usb/usb-testing] [also build test ERROR on v5.0-rc1 next-20190108] [if your patch is applied to the wrong git tree, please drop us a note to help improve the system] url: https://github.com/0day-ci/linux/commits/Ran-Wang/usb-kconfig-remove-dependency-FSL_SOC-for-ehci-fsl-driver/20190108-143252 base: https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git usb-testing config: arm-allmodconfig (attached as .config) compiler: arm-linux-gnueabi-gcc (Debian 7.2.0-11) 7.2.0 reproduce: wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross # save the attached .config to linux build tree GCC_VERSION=7.2.0 make.cross ARCH=arm All errors (new ones prefixed by >>): drivers/usb/phy/phy-fsl-usb.o: In function `fsl_otg_ioctl': >> phy-fsl-usb.c:(.text+0x444): undefined reference to `otg_statemachine' drivers/usb/phy/phy-fsl-usb.o: In function `fsl_otg_start_srp': phy-fsl-usb.c:(.text+0x4c0): undefined reference to `otg_statemachine' drivers/usb/phy/phy-fsl-usb.o: In function `fsl_otg_set_host': phy-fsl-usb.c:(.text+0x5c0): undefined reference to `otg_statemachine' drivers/usb/phy/phy-fsl-usb.o: In function `fsl_otg_start_hnp': phy-fsl-usb.c:(.text+0x650): undefined reference to `otg_statemachine' drivers/usb/phy/phy-fsl-usb.o: In function `show_fsl_usb2_otg_state': >> phy-fsl-usb.c:(.text+0x754): undefined reference to `usb_otg_state_string' drivers/usb/phy/phy-fsl-usb.o: In function `a_wait_enum': phy-fsl-usb.c:(.text+0x1064): undefined reference to `otg_statemachine' drivers/usb/phy/phy-fsl-usb.o: In function `fsl_otg_set_peripheral': >> phy-fsl-usb.c:(.text+0x1648): undefined reference to `usb_gadget_vbus_disconnect' phy-fsl-usb.c:(.text+0x1658): undefined reference to `otg_statemachine' --- 0-DAY kernel test infrastructure Open Source Technology Center https://lists.01.org/pipermail/kbuild-all Intel Corporation
Hi Greg, > -----Original Message----- > From: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > Sent: Tuesday, January 08, 2019 23:45 > To: Ran Wang <ran.wang_1@nxp.com> > Cc: Alan Stern <stern@rowland.harvard.edu>; linux-usb@vger.kernel.org; > linux-kernel@vger.kernel.org; Yinbo Zhu <yinbo.zhu@nxp.com> > Subject: Re: [PATCH 3/3] drivers: usb :fsl: Remove USB Errata checking code > > On Tue, Jan 08, 2019 at 06:04:29AM +0000, Ran Wang wrote: > > From: yinbo.zhu <yinbo.zhu@nxp.com> > > I doubt Yinbo's name has a "." in it :) > > Can you please fix this up to have the correct name here? > > > Remove USB errata checking code from driver. Applicability of erratum > > is retrieved by reading corresponding property in device tree. > > This property is written during device tree fixup. > > > > Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> > > Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> > > Signed-off-by: yinbo.zhu <yinbo.zhu@nxp.com> > > And here. Yes, this is a mistake (should be 'Yinbo Zhu'), I'll fix them in next version, thanks. Regards, Ran
Hi Alan, > -----Original Message----- > From: Alan Stern <stern@rowland.harvard.edu> > Sent: Wednesday, January 09, 2019 00:22 > To: Ran Wang <ran.wang_1@nxp.com> > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>; linux- > usb@vger.kernel.org; linux-kernel@vger.kernel.org; Yinbo Zhu > <yinbo.zhu@nxp.com> > Subject: Re: [PATCH 3/3] drivers: usb :fsl: Remove USB Errata checking code > > On Tue, 8 Jan 2019, Ran Wang wrote: > > > From: yinbo.zhu <yinbo.zhu@nxp.com> > > > > Remove USB errata checking code from driver. Applicability of erratum > > is retrieved by reading corresponding property in device tree. > > This property is written during device tree fixup. > > > > Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> > > Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> > > Signed-off-by: yinbo.zhu <yinbo.zhu@nxp.com> > > Signed-off-by: Ran Wang <ran.wang_1@nxp.com> > > --- > > drivers/usb/host/ehci-fsl.c | 7 +------ > > drivers/usb/host/fsl-mph-dr-of.c | 6 ++++++ > > include/linux/fsl_devices.h | 7 ++++--- > > 3 files changed, 11 insertions(+), 9 deletions(-) > > > > diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c > > index 59ebe1b..2aa408a 100644 > > --- a/drivers/usb/host/ehci-fsl.c > > +++ b/drivers/usb/host/ehci-fsl.c > > @@ -304,14 +304,9 @@ static int ehci_fsl_usb_setup(struct ehci_hcd *ehci) > > return -EINVAL; > > > > if (pdata->operating_mode == FSL_USB2_MPH_HOST) { > > - unsigned int chip, rev, svr; > > - > > - svr = mfspr(SPRN_SVR); > > - chip = svr >> 16; > > - rev = (svr >> 4) & 0xf; > > > > /* Deal with USB Erratum #14 on MPC834x Rev 1.0 & 1.1 > chips */ > > - if ((rev == 1) && (chip >= 0x8050) && (chip <= 0x8055)) > > + if (pdata->has_fsl_erratum_14 == 1) > > ehci->has_fsl_port_bug = 1; > > > > if (pdata->port_enables & FSL_USB2_PORT0_ENABLED) diff -- > git > > a/drivers/usb/host/fsl-mph-dr-of.c b/drivers/usb/host/fsl-mph-dr-of.c > > index 677f9d5..4f8b8a0 100644 > > --- a/drivers/usb/host/fsl-mph-dr-of.c > > +++ b/drivers/usb/host/fsl-mph-dr-of.c > > @@ -225,6 +225,12 @@ static int fsl_usb2_mph_dr_of_probe(struct > platform_device *ofdev) > > pdata->has_fsl_erratum_a005697 = > > of_property_read_bool(np, "fsl,usb_erratum-a005697"); > > > > + if (of_get_property(np, "fsl,usb_erratum_14", NULL)) > > + pdata->has_fsl_erratum_14 = 1; > > + else > > + pdata->has_fsl_erratum_14 = 0; > > + > > + > > /* > > * Determine whether phy_clk_valid needs to be checked > > * by reading property in device tree diff --git > > a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h index > > 60cef82..7aa51bc 100644 > > --- a/include/linux/fsl_devices.h > > +++ b/include/linux/fsl_devices.h > > @@ -98,10 +98,11 @@ struct fsl_usb2_platform_data { > > > > unsigned suspended:1; > > unsigned already_suspended:1; > > - unsigned has_fsl_erratum_a007792:1; > > - unsigned has_fsl_erratum_a005275:1; > > + unsigned has_fsl_erratum_a007792:1; > > + unsigned has_fsl_erratum_14:1; > > + unsigned has_fsl_erratum_a005275:1; > > unsigned has_fsl_erratum_a005697:1; > > - unsigned check_phy_clk_valid:1; > > + unsigned check_phy_clk_valid:1; > > You are using spaces here instead of tabs, which alters the alignment. > Don't do that. Yes, will fix it in next version. Regards, Ran > Alan Stern > > > > > /* register save area for suspend/resume */ > > u32 pm_command;
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index 59ebe1b..2aa408a 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -304,14 +304,9 @@ static int ehci_fsl_usb_setup(struct ehci_hcd *ehci) return -EINVAL; if (pdata->operating_mode == FSL_USB2_MPH_HOST) { - unsigned int chip, rev, svr; - - svr = mfspr(SPRN_SVR); - chip = svr >> 16; - rev = (svr >> 4) & 0xf; /* Deal with USB Erratum #14 on MPC834x Rev 1.0 & 1.1 chips */ - if ((rev == 1) && (chip >= 0x8050) && (chip <= 0x8055)) + if (pdata->has_fsl_erratum_14 == 1) ehci->has_fsl_port_bug = 1; if (pdata->port_enables & FSL_USB2_PORT0_ENABLED) diff --git a/drivers/usb/host/fsl-mph-dr-of.c b/drivers/usb/host/fsl-mph-dr-of.c index 677f9d5..4f8b8a0 100644 --- a/drivers/usb/host/fsl-mph-dr-of.c +++ b/drivers/usb/host/fsl-mph-dr-of.c @@ -225,6 +225,12 @@ static int fsl_usb2_mph_dr_of_probe(struct platform_device *ofdev) pdata->has_fsl_erratum_a005697 = of_property_read_bool(np, "fsl,usb_erratum-a005697"); + if (of_get_property(np, "fsl,usb_erratum_14", NULL)) + pdata->has_fsl_erratum_14 = 1; + else + pdata->has_fsl_erratum_14 = 0; + + /* * Determine whether phy_clk_valid needs to be checked * by reading property in device tree diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h index 60cef82..7aa51bc 100644 --- a/include/linux/fsl_devices.h +++ b/include/linux/fsl_devices.h @@ -98,10 +98,11 @@ struct fsl_usb2_platform_data { unsigned suspended:1; unsigned already_suspended:1; - unsigned has_fsl_erratum_a007792:1; - unsigned has_fsl_erratum_a005275:1; + unsigned has_fsl_erratum_a007792:1; + unsigned has_fsl_erratum_14:1; + unsigned has_fsl_erratum_a005275:1; unsigned has_fsl_erratum_a005697:1; - unsigned check_phy_clk_valid:1; + unsigned check_phy_clk_valid:1; /* register save area for suspend/resume */ u32 pm_command;