diff mbox series

[v2,3/6] media: adv748x: csi2: Link AFE with TXA and TXB

Message ID 20190106155413.30666-4-jacopo+renesas@jmondi.org (mailing list archive)
State New, archived
Headers show
Series media: adv748x: Implement dynamic routing support | expand

Commit Message

Jacopo Mondi Jan. 6, 2019, 3:54 p.m. UTC 
The ADV748x chip supports routing AFE output to either TXA or TXB.
In order to support run-time configuration of video stream path, create an
additional (not enabled) "AFE:8->TXA:0" link, and remove the IMMUTABLE flag
from existing ones.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
---
 drivers/media/i2c/adv748x/adv748x-csi2.c | 44 +++++++++++++-----------
 1 file changed, 23 insertions(+), 21 deletions(-)

Comments

Kieran Bingham Jan. 7, 2019, 10:35 a.m. UTC | #1 
Hi Jacopo,

On 06/01/2019 15:54, Jacopo Mondi wrote:
> The ADV748x chip supports routing AFE output to either TXA or TXB.
> In order to support run-time configuration of video stream path, create an
> additional (not enabled) "AFE:8->TXA:0" link, and remove the IMMUTABLE flag
> from existing ones.

Great - this looks good to me.
Small nit below - but it's not a big deal.

Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> ---
>  drivers/media/i2c/adv748x/adv748x-csi2.c | 44 +++++++++++++-----------
>  1 file changed, 23 insertions(+), 21 deletions(-)
> 
> diff --git a/drivers/media/i2c/adv748x/adv748x-csi2.c b/drivers/media/i2c/adv748x/adv748x-csi2.c
> index b6b5d8c7ea7c..9d391d6f752e 100644
> --- a/drivers/media/i2c/adv748x/adv748x-csi2.c
> +++ b/drivers/media/i2c/adv748x/adv748x-csi2.c
> @@ -27,6 +27,7 @@ static int adv748x_csi2_set_virtual_channel(struct adv748x_csi2 *tx,
>   * @v4l2_dev: Video registration device
>   * @src: Source subdevice to establish link
>   * @src_pad: Pad number of source to link to this @tx
> + * @enable: Link enabled flag
>   *
>   * Ensure that the subdevice is registered against the v4l2_device, and link the
>   * source pad to the sink pad of the CSI2 bus entity.
> @@ -34,17 +35,11 @@ static int adv748x_csi2_set_virtual_channel(struct adv748x_csi2 *tx,
>  static int adv748x_csi2_register_link(struct adv748x_csi2 *tx,
>  				      struct v4l2_device *v4l2_dev,
>  				      struct v4l2_subdev *src,
> -				      unsigned int src_pad)
> +				      unsigned int src_pad,
> +				      bool enable)
>  {
> -	int enabled = MEDIA_LNK_FL_ENABLED;
>  	int ret;
>  
> -	/*
> -	 * Dynamic linking of the AFE is not supported.
> -	 * Register the links as immutable.
> -	 */
> -	enabled |= MEDIA_LNK_FL_IMMUTABLE;
> -
>  	if (!src->v4l2_dev) {
>  		ret = v4l2_device_register_subdev(v4l2_dev, src);
>  		if (ret)
> @@ -53,7 +48,7 @@ static int adv748x_csi2_register_link(struct adv748x_csi2 *tx,
>  
>  	return media_create_pad_link(&src->entity, src_pad,
>  				     &tx->sd.entity, ADV748X_CSI2_SINK,
> -				     enabled);
> +				     enable ? MEDIA_LNK_FL_ENABLED : 0);
>  }
>  
>  /* -----------------------------------------------------------------------------
> @@ -68,25 +63,32 @@ static int adv748x_csi2_registered(struct v4l2_subdev *sd)
>  {
>  	struct adv748x_csi2 *tx = adv748x_sd_to_csi2(sd);
>  	struct adv748x_state *state = tx->state;
> +	int ret;
>  
>  	adv_dbg(state, "Registered %s (%s)", is_txa(tx) ? "TXA":"TXB",
>  			sd->name);
>  
>  	/*
> -	 * The adv748x hardware allows the AFE to route through the TXA, however
> -	 * this is not currently supported in this driver.
> +	 * Link TXA to AFE and HDMI, and TXB to AFE only as TXB cannot output
> +	 * HDMI.
>  	 *
> -	 * Link HDMI->TXA, and AFE->TXB directly.
> +	 * The HDMI->TXA link is enabled by default, as the AFE->TXB is.

I might have worded this "as is the AFE->TXB." but it's understandable.
I can update this when applying if you wish.


>  	 */
> -	if (is_txa(tx) && is_hdmi_enabled(state))
> -		return adv748x_csi2_register_link(tx, sd->v4l2_dev,
> -						  &state->hdmi.sd,
> -						  ADV748X_HDMI_SOURCE);
> -	if (is_txb(tx) && is_afe_enabled(state))
> -		return adv748x_csi2_register_link(tx, sd->v4l2_dev,
> -						  &state->afe.sd,
> -						  ADV748X_AFE_SOURCE);
> -	return 0;
> +	if (is_afe_enabled(state)) {
> +		ret = adv748x_csi2_register_link(tx, sd->v4l2_dev,
> +						 &state->afe.sd,
> +						 ADV748X_AFE_SOURCE,
> +						 is_txb(tx));
> +		if (ret)
> +			return ret;
> +	}
> +
> +	/* Register link to HDMI for TXA only. */
> +	if (is_txb(tx) || !is_hdmi_enabled(state))
> +		return 0;
> +
> +	return adv748x_csi2_register_link(tx, sd->v4l2_dev, &state->hdmi.sd,
> +					  ADV748X_HDMI_SOURCE, true);
>  }
>  
>  static const struct v4l2_subdev_internal_ops adv748x_csi2_internal_ops = {
>
Laurent Pinchart Jan. 9, 2019, 12:11 a.m. UTC | #2 
Hi Jacopo,

Thank you for the patch.

On Sunday, 6 January 2019 17:54:10 EET Jacopo Mondi wrote:
> The ADV748x chip supports routing AFE output to either TXA or TXB.
> In order to support run-time configuration of video stream path, create an
> additional (not enabled) "AFE:8->TXA:0" link, and remove the IMMUTABLE flag
> from existing ones.
> 
> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> ---
>  drivers/media/i2c/adv748x/adv748x-csi2.c | 44 +++++++++++++-----------
>  1 file changed, 23 insertions(+), 21 deletions(-)
> 
> diff --git a/drivers/media/i2c/adv748x/adv748x-csi2.c
> b/drivers/media/i2c/adv748x/adv748x-csi2.c index b6b5d8c7ea7c..9d391d6f752e
> 100644
> --- a/drivers/media/i2c/adv748x/adv748x-csi2.c
> +++ b/drivers/media/i2c/adv748x/adv748x-csi2.c
> @@ -27,6 +27,7 @@ static int adv748x_csi2_set_virtual_channel(struct
> adv748x_csi2 *tx, * @v4l2_dev: Video registration device
>   * @src: Source subdevice to establish link
>   * @src_pad: Pad number of source to link to this @tx
> + * @enable: Link enabled flag
>   *
>   * Ensure that the subdevice is registered against the v4l2_device, and
> link the * source pad to the sink pad of the CSI2 bus entity.
> @@ -34,17 +35,11 @@ static int adv748x_csi2_set_virtual_channel(struct
> adv748x_csi2 *tx, static int adv748x_csi2_register_link(struct adv748x_csi2
> *tx,
>  				      struct v4l2_device *v4l2_dev,
>  				      struct v4l2_subdev *src,
> -				      unsigned int src_pad)
> +				      unsigned int src_pad,
> +				      bool enable)
>  {
> -	int enabled = MEDIA_LNK_FL_ENABLED;
>  	int ret;
> 
> -	/*
> -	 * Dynamic linking of the AFE is not supported.
> -	 * Register the links as immutable.
> -	 */
> -	enabled |= MEDIA_LNK_FL_IMMUTABLE;
> -
>  	if (!src->v4l2_dev) {
>  		ret = v4l2_device_register_subdev(v4l2_dev, src);
>  		if (ret)
> @@ -53,7 +48,7 @@ static int adv748x_csi2_register_link(struct adv748x_csi2
> *tx,
> 
>  	return media_create_pad_link(&src->entity, src_pad,
>  				     &tx->sd.entity, ADV748X_CSI2_SINK,
> -				     enabled);
> +				     enable ? MEDIA_LNK_FL_ENABLED : 0);
>  }
> 
>  /* ------------------------------------------------------------------------
> @@ -68,25 +63,32 @@ static int adv748x_csi2_registered(struct v4l2_subdev
> *sd) {
>  	struct adv748x_csi2 *tx = adv748x_sd_to_csi2(sd);
>  	struct adv748x_state *state = tx->state;
> +	int ret;
> 
>  	adv_dbg(state, "Registered %s (%s)", is_txa(tx) ? "TXA":"TXB",
>  			sd->name);
> 
>  	/*
> -	 * The adv748x hardware allows the AFE to route through the TXA, however
> -	 * this is not currently supported in this driver.
> +	 * Link TXA to AFE and HDMI, and TXB to AFE only as TXB cannot output
> +	 * HDMI.
>  	 *
> -	 * Link HDMI->TXA, and AFE->TXB directly.
> +	 * The HDMI->TXA link is enabled by default, as the AFE->TXB is.
>  	 */
> -	if (is_txa(tx) && is_hdmi_enabled(state))
> -		return adv748x_csi2_register_link(tx, sd->v4l2_dev,
> -						  &state->hdmi.sd,
> -						  ADV748X_HDMI_SOURCE);
> -	if (is_txb(tx) && is_afe_enabled(state))
> -		return adv748x_csi2_register_link(tx, sd->v4l2_dev,
> -						  &state->afe.sd,
> -						  ADV748X_AFE_SOURCE);
> -	return 0;
> +	if (is_afe_enabled(state)) {
> +		ret = adv748x_csi2_register_link(tx, sd->v4l2_dev,
> +						 &state->afe.sd,
> +						 ADV748X_AFE_SOURCE,
> +						 is_txb(tx));
> +		if (ret)
> +			return ret;
> +	}
> +
> +	/* Register link to HDMI for TXA only. */

I would have written "Create link", but then realized that the function is 
named adv748x_csi2_register_link(). Looking at its definition, I now see this 
means "register and link". That seems a bit of a hack, especially seeing how 
double registration is skipped in the function by checking src->v4l2_dev. 
Kieran, could this be fixed ?

> +	if (is_txb(tx) || !is_hdmi_enabled(state))
> +		return 0;
> +
> +	return adv748x_csi2_register_link(tx, sd->v4l2_dev, &state->hdmi.sd,
> +					  ADV748X_HDMI_SOURCE, true);
>  }
> 
>  static const struct v4l2_subdev_internal_ops adv748x_csi2_internal_ops = {
diff mbox series

Patch

diff --git a/drivers/media/i2c/adv748x/adv748x-csi2.c b/drivers/media/i2c/adv748x/adv748x-csi2.c
index b6b5d8c7ea7c..9d391d6f752e 100644
--- a/drivers/media/i2c/adv748x/adv748x-csi2.c
+++ b/drivers/media/i2c/adv748x/adv748x-csi2.c
@@ -27,6 +27,7 @@  static int adv748x_csi2_set_virtual_channel(struct adv748x_csi2 *tx,
  * @v4l2_dev: Video registration device
  * @src: Source subdevice to establish link
  * @src_pad: Pad number of source to link to this @tx
+ * @enable: Link enabled flag
  *
  * Ensure that the subdevice is registered against the v4l2_device, and link the
  * source pad to the sink pad of the CSI2 bus entity.
@@ -34,17 +35,11 @@  static int adv748x_csi2_set_virtual_channel(struct adv748x_csi2 *tx,
 static int adv748x_csi2_register_link(struct adv748x_csi2 *tx,
 				      struct v4l2_device *v4l2_dev,
 				      struct v4l2_subdev *src,
-				      unsigned int src_pad)
+				      unsigned int src_pad,
+				      bool enable)
 {
-	int enabled = MEDIA_LNK_FL_ENABLED;
 	int ret;
 
-	/*
-	 * Dynamic linking of the AFE is not supported.
-	 * Register the links as immutable.
-	 */
-	enabled |= MEDIA_LNK_FL_IMMUTABLE;
-
 	if (!src->v4l2_dev) {
 		ret = v4l2_device_register_subdev(v4l2_dev, src);
 		if (ret)
@@ -53,7 +48,7 @@  static int adv748x_csi2_register_link(struct adv748x_csi2 *tx,
 
 	return media_create_pad_link(&src->entity, src_pad,
 				     &tx->sd.entity, ADV748X_CSI2_SINK,
-				     enabled);
+				     enable ? MEDIA_LNK_FL_ENABLED : 0);
 }
 
 /* -----------------------------------------------------------------------------
@@ -68,25 +63,32 @@  static int adv748x_csi2_registered(struct v4l2_subdev *sd)
 {
 	struct adv748x_csi2 *tx = adv748x_sd_to_csi2(sd);
 	struct adv748x_state *state = tx->state;
+	int ret;
 
 	adv_dbg(state, "Registered %s (%s)", is_txa(tx) ? "TXA":"TXB",
 			sd->name);
 
 	/*
-	 * The adv748x hardware allows the AFE to route through the TXA, however
-	 * this is not currently supported in this driver.
+	 * Link TXA to AFE and HDMI, and TXB to AFE only as TXB cannot output
+	 * HDMI.
 	 *
-	 * Link HDMI->TXA, and AFE->TXB directly.
+	 * The HDMI->TXA link is enabled by default, as the AFE->TXB is.
 	 */
-	if (is_txa(tx) && is_hdmi_enabled(state))
-		return adv748x_csi2_register_link(tx, sd->v4l2_dev,
-						  &state->hdmi.sd,
-						  ADV748X_HDMI_SOURCE);
-	if (is_txb(tx) && is_afe_enabled(state))
-		return adv748x_csi2_register_link(tx, sd->v4l2_dev,
-						  &state->afe.sd,
-						  ADV748X_AFE_SOURCE);
-	return 0;
+	if (is_afe_enabled(state)) {
+		ret = adv748x_csi2_register_link(tx, sd->v4l2_dev,
+						 &state->afe.sd,
+						 ADV748X_AFE_SOURCE,
+						 is_txb(tx));
+		if (ret)
+			return ret;
+	}
+
+	/* Register link to HDMI for TXA only. */
+	if (is_txb(tx) || !is_hdmi_enabled(state))
+		return 0;
+
+	return adv748x_csi2_register_link(tx, sd->v4l2_dev, &state->hdmi.sd,
+					  ADV748X_HDMI_SOURCE, true);
 }
 
 static const struct v4l2_subdev_internal_ops adv748x_csi2_internal_ops = {