| Message ID | 0c38b838f08b741b5b24a65886134104c5bdc69a.1547026369.git-series.maxime.ripard@bootlin.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | phy: Add configuration interface for MIPI D-PHY devices | expand |
Hi Maxime, On Wed, Jan 09, 2019 at 10:33:24AM +0100, Maxime Ripard wrote: > The Cadence D-PHY bindings was defined as part of the DSI block so far. > However, since it's now going to be a separate driver, we need to move the > binding to a file of its own. > > Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Could you also send this to the devicetree list, please? > --- > Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt | 21 +------- > Documentation/devicetree/bindings/phy/cdns,dphy.txt | 20 +++++++- > 2 files changed, 20 insertions(+), 21 deletions(-) > create mode 100644 Documentation/devicetree/bindings/phy/cdns,dphy.txt > > diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt b/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt > index f5725bb6c61c..525a4bfd8634 100644 > --- a/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt > +++ b/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt > @@ -31,28 +31,7 @@ Required subnodes: > - one subnode per DSI device connected on the DSI bus. Each DSI device should > contain a reg property encoding its virtual channel. > > -Cadence DPHY > -============ > - > -Cadence DPHY block. > - > -Required properties: > -- compatible: should be set to "cdns,dphy". > -- reg: physical base address and length of the DPHY registers. > -- clocks: DPHY reference clocks. > -- clock-names: must contain "psm" and "pll_ref". > -- #phy-cells: must be set to 0. > - > - > Example: > - dphy0: dphy@fd0e0000{ > - compatible = "cdns,dphy"; > - reg = <0x0 0xfd0e0000 0x0 0x1000>; > - clocks = <&psm_clk>, <&pll_ref_clk>; > - clock-names = "psm", "pll_ref"; > - #phy-cells = <0>; > - }; > - > dsi0: dsi@fd0c0000 { > compatible = "cdns,dsi"; > reg = <0x0 0xfd0c0000 0x0 0x1000>; > diff --git a/Documentation/devicetree/bindings/phy/cdns,dphy.txt b/Documentation/devicetree/bindings/phy/cdns,dphy.txt > new file mode 100644 > index 000000000000..1095bc4e72d9 > --- /dev/null > +++ b/Documentation/devicetree/bindings/phy/cdns,dphy.txt > @@ -0,0 +1,20 @@ > +Cadence DPHY > +============ > + > +Cadence DPHY block. > + > +Required properties: > +- compatible: should be set to "cdns,dphy". > +- reg: physical base address and length of the DPHY registers. > +- clocks: DPHY reference clocks. > +- clock-names: must contain "psm" and "pll_ref". > +- #phy-cells: must be set to 0. > + > +Example: > + dphy0: dphy@fd0e0000{ > + compatible = "cdns,dphy"; > + reg = <0x0 0xfd0e0000 0x0 0x1000>; > + clocks = <&psm_clk>, <&pll_ref_clk>; > + clock-names = "psm", "pll_ref"; > + #phy-cells = <0>; > + }; > -- > git-series 0.9.1
diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt b/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt index f5725bb6c61c..525a4bfd8634 100644 --- a/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt +++ b/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt @@ -31,28 +31,7 @@ Required subnodes: - one subnode per DSI device connected on the DSI bus. Each DSI device should contain a reg property encoding its virtual channel. -Cadence DPHY -============ - -Cadence DPHY block. - -Required properties: -- compatible: should be set to "cdns,dphy". -- reg: physical base address and length of the DPHY registers. -- clocks: DPHY reference clocks. -- clock-names: must contain "psm" and "pll_ref". -- #phy-cells: must be set to 0. - - Example: - dphy0: dphy@fd0e0000{ - compatible = "cdns,dphy"; - reg = <0x0 0xfd0e0000 0x0 0x1000>; - clocks = <&psm_clk>, <&pll_ref_clk>; - clock-names = "psm", "pll_ref"; - #phy-cells = <0>; - }; - dsi0: dsi@fd0c0000 { compatible = "cdns,dsi"; reg = <0x0 0xfd0c0000 0x0 0x1000>; diff --git a/Documentation/devicetree/bindings/phy/cdns,dphy.txt b/Documentation/devicetree/bindings/phy/cdns,dphy.txt new file mode 100644 index 000000000000..1095bc4e72d9 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/cdns,dphy.txt @@ -0,0 +1,20 @@ +Cadence DPHY +============ + +Cadence DPHY block. + +Required properties: +- compatible: should be set to "cdns,dphy". +- reg: physical base address and length of the DPHY registers. +- clocks: DPHY reference clocks. +- clock-names: must contain "psm" and "pll_ref". +- #phy-cells: must be set to 0. + +Example: + dphy0: dphy@fd0e0000{ + compatible = "cdns,dphy"; + reg = <0x0 0xfd0e0000 0x0 0x1000>; + clocks = <&psm_clk>, <&pll_ref_clk>; + clock-names = "psm", "pll_ref"; + #phy-cells = <0>; + };
The Cadence D-PHY bindings was defined as part of the DSI block so far. However, since it's now going to be a separate driver, we need to move the binding to a file of its own. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> --- Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt | 21 +------- Documentation/devicetree/bindings/phy/cdns,dphy.txt | 20 +++++++- 2 files changed, 20 insertions(+), 21 deletions(-) create mode 100644 Documentation/devicetree/bindings/phy/cdns,dphy.txt