| Message ID | 1545373225-32046-3-git-send-email-jshekhar@codeaurora.org (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | Use interconnect API in MDSS on SDM845 | expand |
Hi Jayant, On 12/21/18 08:20, Jayant Shekhar wrote: > From: Sravanthi Kollukuduru <skolluku@codeaurora.org> > > The interconnect framework is designed to provide a > standard kernel interface to control the settings of > the interconnects on a SoC. > > The interconnect API uses a consumer/provider-based model, > where the providers are the interconnect buses and the > consumers could be various drivers. > > MDSS is one of the interconnect consumers which uses the > interconnect APIs to get the path between endpoints and > set its bandwidth/latency/QoS requirements for the given Currently we set only bandwidth. > interconnected path. > > Changes in v2: > - Remove error log and unnecessary check (Jordan Crouse) > > Changes in v3: > - Code clean involving variable name change, removal > of extra paranthesis and variables (Matthias Kaehlcke) > > Changes in v4: > - Add comments, spacings, tabs, proper port name > and icc macro (Georgi Djakov) The changes should not be part of the commit text, but should move below the "---" line. > > Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> > Signed-off-by: Jayant Shekhar <jshekhar@codeaurora.org> > --- > drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c | 49 +++++++++++++++++++++++++++++--- > 1 file changed, 45 insertions(+), 4 deletions(-) > > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c > index 38576f8..fcaa71f 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c > @@ -4,11 +4,15 @@ > */ > > #include "dpu_kms.h" > +#include <linux/interconnect.h> > > #define to_dpu_mdss(x) container_of(x, struct dpu_mdss, base) > > #define HW_INTR_STATUS 0x0010 > > +/* Max BW defined in KBps */ > +#define MAX_BW 6800000 > + > struct dpu_mdss { > struct msm_mdss base; > void __iomem *mmio; > @@ -16,8 +20,30 @@ struct dpu_mdss { > u32 hwversion; > struct dss_module_power mp; > struct dpu_irq_controller irq_controller; > + struct icc_path *path[2]; > + u32 num_paths; > }; > > +static int dpu_mdss_parse_data_bus_icc_path(struct drm_device *dev, > + struct dpu_mdss *dpu_mdss) Nit: Please align to the open parenthesis. Otherwise looks good to me. Thanks, Georgi
Hi, On Wed, Jan 9, 2019 at 6:38 AM Georgi Djakov <georgi.djakov@linaro.org> wrote: > > Hi Jayant, > > On 12/21/18 08:20, Jayant Shekhar wrote: > > From: Sravanthi Kollukuduru <skolluku@codeaurora.org> > > > > The interconnect framework is designed to provide a > > standard kernel interface to control the settings of > > the interconnects on a SoC. > > > > The interconnect API uses a consumer/provider-based model, > > where the providers are the interconnect buses and the > > consumers could be various drivers. > > > > MDSS is one of the interconnect consumers which uses the > > interconnect APIs to get the path between endpoints and > > set its bandwidth/latency/QoS requirements for the given > > Currently we set only bandwidth. > > > interconnected path. > > > > Changes in v2: > > - Remove error log and unnecessary check (Jordan Crouse) > > > > Changes in v3: > > - Code clean involving variable name change, removal > > of extra paranthesis and variables (Matthias Kaehlcke) > > > > Changes in v4: > > - Add comments, spacings, tabs, proper port name > > and icc macro (Georgi Djakov) > > The changes should not be part of the commit text, but should move below > the "---" line. Drive-by comment that (I believe) they actually should be part of the commit text. Convention for changes in the "drm" subsystem appears to be to include the revision log in the commit text. This is unlike the rest of the kernel, but *shrug*. Try, for instance: git log --no-merges v4.19..v5.0-rc1 drivers/gpu/drm/msm | grep 'v[0-9]' -Doug
Hi, On 9.01.19 18:04, Doug Anderson wrote: > Hi, > > On Wed, Jan 9, 2019 at 6:38 AM Georgi Djakov <georgi.djakov@linaro.org> wrote: >> >> Hi Jayant, >> >> On 12/21/18 08:20, Jayant Shekhar wrote: >>> From: Sravanthi Kollukuduru <skolluku@codeaurora.org> >>> >>> The interconnect framework is designed to provide a >>> standard kernel interface to control the settings of >>> the interconnects on a SoC. >>> >>> The interconnect API uses a consumer/provider-based model, >>> where the providers are the interconnect buses and the >>> consumers could be various drivers. >>> >>> MDSS is one of the interconnect consumers which uses the >>> interconnect APIs to get the path between endpoints and >>> set its bandwidth/latency/QoS requirements for the given >> >> Currently we set only bandwidth. >> >>> interconnected path. >>> >>> Changes in v2: >>> - Remove error log and unnecessary check (Jordan Crouse) >>> >>> Changes in v3: >>> - Code clean involving variable name change, removal >>> of extra paranthesis and variables (Matthias Kaehlcke) >>> >>> Changes in v4: >>> - Add comments, spacings, tabs, proper port name >>> and icc macro (Georgi Djakov) >> >> The changes should not be part of the commit text, but should move below >> the "---" line. > > Drive-by comment that (I believe) they actually should be part of the > commit text. Convention for changes in the "drm" subsystem appears to > be to include the revision log in the commit text. This is unlike the > rest of the kernel, but *shrug*. Indeed! Thanks for the info! Then it's fine. BR, Georgi > > Try, for instance: > > git log --no-merges v4.19..v5.0-rc1 drivers/gpu/drm/msm | grep 'v[0-9]' > > -Doug >
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c index 38576f8..fcaa71f 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c @@ -4,11 +4,15 @@ */ #include "dpu_kms.h" +#include <linux/interconnect.h> #define to_dpu_mdss(x) container_of(x, struct dpu_mdss, base) #define HW_INTR_STATUS 0x0010 +/* Max BW defined in KBps */ +#define MAX_BW 6800000 + struct dpu_mdss { struct msm_mdss base; void __iomem *mmio; @@ -16,8 +20,30 @@ struct dpu_mdss { u32 hwversion; struct dss_module_power mp; struct dpu_irq_controller irq_controller; + struct icc_path *path[2]; + u32 num_paths; }; +static int dpu_mdss_parse_data_bus_icc_path(struct drm_device *dev, + struct dpu_mdss *dpu_mdss) +{ + struct icc_path *path0 = of_icc_get(dev->dev, "mdp0-mem"); + struct icc_path *path1 = of_icc_get(dev->dev, "mdp1-mem"); + + if (IS_ERR(path0)) + return PTR_ERR(path0); + + dpu_mdss->path[0] = path0; + dpu_mdss->num_paths = 1; + + if (!IS_ERR(path1)) { + dpu_mdss->path[1] = path1; + dpu_mdss->num_paths++; + } + + return 0; +} + static irqreturn_t dpu_mdss_irq(int irq, void *arg) { struct dpu_mdss *dpu_mdss = arg; @@ -127,7 +153,11 @@ static int dpu_mdss_enable(struct msm_mdss *mdss) { struct dpu_mdss *dpu_mdss = to_dpu_mdss(mdss); struct dss_module_power *mp = &dpu_mdss->mp; - int ret; + int ret, i; + u64 avg_bw = dpu_mdss->num_paths ? MAX_BW / dpu_mdss->num_paths : 0; + + for (i = 0; i < dpu_mdss->num_paths; i++) + icc_set(dpu_mdss->path[i], avg_bw, kBps_to_icc(MAX_BW)); ret = msm_dss_enable_clk(mp->clk_config, mp->num_clk, true); if (ret) @@ -140,12 +170,15 @@ static int dpu_mdss_disable(struct msm_mdss *mdss) { struct dpu_mdss *dpu_mdss = to_dpu_mdss(mdss); struct dss_module_power *mp = &dpu_mdss->mp; - int ret; + int ret, i; ret = msm_dss_enable_clk(mp->clk_config, mp->num_clk, false); if (ret) DPU_ERROR("clock disable failed, ret:%d\n", ret); + for (i = 0; i < dpu_mdss->num_paths; i++) + icc_set(dpu_mdss->path[i], 0, 0); + return ret; } @@ -155,6 +188,7 @@ static void dpu_mdss_destroy(struct drm_device *dev) struct msm_drm_private *priv = dev->dev_private; struct dpu_mdss *dpu_mdss = to_dpu_mdss(priv->mdss); struct dss_module_power *mp = &dpu_mdss->mp; + int i; pm_runtime_disable(dev->dev); _dpu_mdss_irq_domain_fini(dpu_mdss); @@ -162,6 +196,9 @@ static void dpu_mdss_destroy(struct drm_device *dev) msm_dss_put_clk(mp->clk_config, mp->num_clk); devm_kfree(&pdev->dev, mp->clk_config); + for (i = 0; i < dpu_mdss->num_paths; i++) + icc_put(dpu_mdss->path[i]); + if (dpu_mdss->mmio) devm_iounmap(&pdev->dev, dpu_mdss->mmio); dpu_mdss->mmio = NULL; @@ -200,6 +237,10 @@ int dpu_mdss_init(struct drm_device *dev) } dpu_mdss->mmio_len = resource_size(res); + ret = dpu_mdss_parse_data_bus_icc_path(dev, dpu_mdss); + if (ret) + return ret; + mp = &dpu_mdss->mp; ret = msm_dss_parse_clock(pdev, mp); if (ret) { @@ -221,14 +262,14 @@ int dpu_mdss_init(struct drm_device *dev) goto irq_error; } + priv->mdss = &dpu_mdss->base; + pm_runtime_enable(dev->dev); pm_runtime_get_sync(dev->dev); dpu_mdss->hwversion = readl_relaxed(dpu_mdss->mmio); pm_runtime_put_sync(dev->dev); - priv->mdss = &dpu_mdss->base; - return ret; irq_error: