diff mbox series

[RFT] spi-renesas-rpc: manual read issue workaround

Message ID 76eb5af5-756e-4d54-0be2-55573649d2d1@cogentembedded.com (mailing list archive)
State Superseded
Delegated to: Geert Uytterhoeven
Headers show
Series [RFT] spi-renesas-rpc: manual read issue workaround | expand

Commit Message

Sergei Shtylyov Dec. 27, 2018, 8:21 p.m. UTC
Even with the trickery introduced in the latest version of the RPC-IF SPI
driver, RPC-IF corrupts the data byte 4 for the RDID command, so the flash
chip is still not detected. It started to work correctly after I tried to
implement the workaround to this issue using the U-Boot RPC-IF driver's
approach, i.e. using the external address space read mode.

While at it, I'm removing the aforementioned trickery... 

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
The patch is against the 'devel' branch of Simon Horman's 'renesas,git' repo
plus the RPC-IF SPI driver patch [1] and its prerequisites...
 
[1] https://patchwork.kernel.org/patch/10742037/

 drivers/spi/spi-renesas-rpc.c |   66 ++++++++++++++++++++++++++----------------
 1 file changed, 42 insertions(+), 24 deletions(-)

Comments

Mark Brown Jan. 7, 2019, 6:15 p.m. UTC | #1
On Thu, Dec 27, 2018 at 11:21:14PM +0300, Sergei Shtylyov wrote:

>  drivers/spi/spi-renesas-rpc.c |   66 ++++++++++++++++++++++++++----------------

This does not exist upstream.
Sergei Shtylyov Jan. 8, 2019, 7:52 a.m. UTC | #2
Hello!

On 07.01.2019 21:15, Mark Brown wrote:

> On Thu, Dec 27, 2018 at 11:21:14PM +0300, Sergei Shtylyov wrote:
> 
>>   drivers/spi/spi-renesas-rpc.c |   66 ++++++++++++++++++++++++++----------------
> 
> This does not exist upstream.

    As I said, the patch was atop of the RPC-IF driver patch by M. Yang.

MBR, Sergei
Mark Brown Jan. 8, 2019, 12:29 p.m. UTC | #3
On Tue, Jan 08, 2019 at 10:52:11AM +0300, Sergei Shtylyov wrote:

> > >   drivers/spi/spi-renesas-rpc.c |   66 ++++++++++++++++++++++++++----------------

> > This does not exist upstream.

>    As I said, the patch was atop of the RPC-IF driver patch by M. Yang.

Please don't submit patches for things that aren't upstream upstream.
Sergei Shtylyov Jan. 10, 2019, 6:38 p.m. UTC | #4
On 01/08/2019 03:29 PM, Mark Brown wrote:

>>>>   drivers/spi/spi-renesas-rpc.c |   66 ++++++++++++++++++++++++++----------------
> 
>>> This does not exist upstream.
> 
>>    As I said, the patch was atop of the RPC-IF driver patch by M. Yang.
> 
> Please don't submit patches for things that aren't upstream upstream.

   Even with RFC/RFT in the subject?

MBR, Sergei
Mark Brown Jan. 14, 2019, 10:47 p.m. UTC | #5
On Thu, Jan 10, 2019 at 09:38:33PM +0300, Sergei Shtylyov wrote:
> On 01/08/2019 03:29 PM, Mark Brown wrote:

> >>    As I said, the patch was atop of the RPC-IF driver patch by M. Yang.

> > Please don't submit patches for things that aren't upstream upstream.

>    Even with RFC/RFT in the subject?

It's certainly an issue for the testing side of things if someone needs
to apply it on top of a patch that isn't even on the list in order to
test!  It's obviously OK to propose changes to a thing that's currently
in review but it it's something nobody is even trying to upstream then
that's less helpful.
Sergei Shtylyov Jan. 15, 2019, 4:25 p.m. UTC | #6
On 01/15/2019 01:47 AM, Mark Brown wrote:

>>>>    As I said, the patch was atop of the RPC-IF driver patch by M. Yang.
> 
>>> Please don't submit patches for things that aren't upstream upstream.
> 
>>    Even with RFC/RFT in the subject?
> 
> It's certainly an issue for the testing side of things if someone needs
> to apply it on top of a patch that isn't even on the list in order to
> test!  It's obviously OK to propose changes to a thing that's currently
> in review but it it's something nobody is even trying to upstream then
> that's less helpful.

   Hm... I'm seeing the linux-spi ML among the addressees of the RPC-IF patch
by Mason Yang. and I'm seeing it in the archives:

https://marc.info/?l=linux-spi&m=154563438006940

MBR, Sergei
diff mbox series

Patch

Index: renesas/drivers/spi/spi-renesas-rpc.c
===================================================================
--- renesas.orig/drivers/spi/spi-renesas-rpc.c
+++ renesas/drivers/spi/spi-renesas-rpc.c
@@ -270,34 +270,52 @@  static int rpc_spi_io_xfer(struct rpc_sp
 	} else if (rx_buf) {
 		smenr = rpc->smenr;
 
-		while (pos < rpc->xferlen) {
+		/*
+		 * RPC-IF spoils the data for the commands without an address
+		 * phase (like RDID) in the manual mode, so we'll have to work
+		 * around this issue by using the external address space read
+		 * mode instead; we seem to be able to read 8 bytes at most in
+		 * this mode though...
+		 */
+		if (!(smenr & RPC_SMENR_ADE(0xf))) {
 			u32 nbytes = rpc->xferlen - pos;
+			u64 tmp;
 
-			if (nbytes > 4)
-				nbytes = 4;
+			if (nbytes > 8)
+				nbytes = 8;
 
-			smcr = rpc->smcr | RPC_SMCR_SPIE;
+			regmap_write(rpc->regmap, RPC_CMNCR, RPC_CMNCR_SFDE |
+				     RPC_CMNCR_MOIIO_HIZ | RPC_CMNCR_IOFV_HIZ |
+				     RPC_CMNCR_BSZ(0));
+			regmap_write(rpc->regmap, RPC_DRCR, 0);
+			regmap_write(rpc->regmap, RPC_DREAR, RPC_DREAR_EAC(1));
+			regmap_write(rpc->regmap, RPC_DRCMR, rpc->cmd);
+			regmap_write(rpc->regmap, RPC_DRDMCR, rpc->dummy);
+			regmap_write(rpc->regmap, RPC_DROPR, 0);
+			regmap_write(rpc->regmap, RPC_DRENR, rpc->smenr &
+				     ~RPC_SMENR_SPIDE(0xf));
+
+			tmp = readq(rpc->dirmap);
+			memcpy(rx_buf, &tmp, nbytes);
+		} else {
+			while (pos < rpc->xferlen) {
+				u32 nbytes = rpc->xferlen - pos;
+
+				if (nbytes > 4)
+					nbytes = 4;
+
+				smcr = rpc->smcr | RPC_SMCR_SPIE;
+
+				regmap_write(rpc->regmap, RPC_SMENR, smenr);
+				regmap_write(rpc->regmap, RPC_SMCR, smcr);
+				ret = wait_msg_xfer_end(rpc);
+				if (ret)
+					goto out;
+
+				regmap_read(rpc->regmap, RPC_SMRDR0, &data);
+				memcpy(rx_buf + pos, &data, nbytes);
+				pos += nbytes;
 
-			if (rpc->xferlen > 4 && rpc->xferlen < 8 && pos == 0)
-				smcr |= RPC_SMCR_SSLKP;
-
-			regmap_write(rpc->regmap, RPC_SMENR, smenr);
-			regmap_write(rpc->regmap, RPC_SMCR, smcr);
-			ret = wait_msg_xfer_end(rpc);
-			if (ret)
-				goto out;
-
-			regmap_read(rpc->regmap, RPC_SMRDR0, &data);
-			memcpy(rx_buf + pos, &data, nbytes);
-			pos += nbytes;
-
-			if (rpc->xferlen > 4 && rpc->xferlen < 8 && pos == 4) {
-				smenr = rpc->smenr & ~RPC_SMENR_CDE &
-					~RPC_SMENR_ADE(0xf);
-			} else {
-				regmap_write(rpc->regmap, RPC_SMCMR, rpc->cmd);
-				regmap_write(rpc->regmap, RPC_SMDMCR,
-					     rpc->dummy);
 				regmap_write(rpc->regmap, RPC_SMADR,
 					     rpc->addr + pos);
 			}