| Message ID | 20190117092948.32079-1-kai.heng.feng@canonical.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/1] Input: elantech: Use SMBus based on bus info | expand |
Hi Kai-Heng, On Thu, Jan 17, 2019 at 10:30 AM Kai-Heng Feng <kai.heng.feng@canonical.com> wrote: > > There are some new HP laptops with Elantech touchpad don't support > multitouch. > > Both ETP_BUS_SMB_HST_NTFY_ONLY and ETP_BUS_PS2_SMB_HST_NTFY devices can > use SMBus to support 5 fingers touch, so we need to chech them too. > > So use elantech_use_host_notify() to do a more thouroughly check. > > Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> > --- > drivers/input/mouse/elantech.c | 58 +++++++++++++++++----------------- > 1 file changed, 29 insertions(+), 29 deletions(-) > > diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c > index 9fe075c137dc..5bcf1c147eb1 100644 > --- a/drivers/input/mouse/elantech.c > +++ b/drivers/input/mouse/elantech.c > @@ -1799,6 +1799,34 @@ static int elantech_create_smbus(struct psmouse *psmouse, > leave_breadcrumbs); > } > > +static bool elantech_use_host_notify(struct psmouse *psmouse, > + struct elantech_device_info *info) > +{ > + if (ETP_NEW_IC_SMBUS_HOST_NOTIFY(info->fw_version)) > + return true; > + > + switch (info->bus) { > + case ETP_BUS_PS2_ONLY: > + /* expected case */ > + break; > + case ETP_BUS_SMB_ALERT_ONLY: > + /* fall-through */ > + case ETP_BUS_PS2_SMB_ALERT: > + psmouse_dbg(psmouse, "Ignoring SMBus provider through alert protocol.\n"); > + break; > + case ETP_BUS_SMB_HST_NTFY_ONLY: > + /* fall-through */ > + case ETP_BUS_PS2_SMB_HST_NTFY: > + return true; > + default: > + psmouse_dbg(psmouse, > + "Ignoring SMBus bus provider %d.\n", > + info->bus); > + } > + > + return false; > +} > + > /** > * elantech_setup_smbus - called once the PS/2 devices are enumerated > * and decides to instantiate a SMBus InterTouch device. > @@ -1818,7 +1846,7 @@ static int elantech_setup_smbus(struct psmouse *psmouse, > * i2c_blacklist_pnp_ids. > * Old ICs are up to the user to decide. > */ > - if (!ETP_NEW_IC_SMBUS_HOST_NOTIFY(info->fw_version) || > + if (!elantech_use_host_notify(psmouse, info) || That was my initial approach of the series, but I ended up being more conservative as this would flip all of the existing elantech SMBUS capable touchpads to use elan_i2c. And I didn't want to deal with 4/5 year old laptops that suddenly broke. So I wonder if you can restrict this default change to the recent laptops (let's say 2018+). Maybe by looking at their FW version or something else in the DMI? Cheers, Benjamin > psmouse_matches_pnp_id(psmouse, i2c_blacklist_pnp_ids)) > return -ENXIO; > } > @@ -1838,34 +1866,6 @@ static int elantech_setup_smbus(struct psmouse *psmouse, > return 0; > } > > -static bool elantech_use_host_notify(struct psmouse *psmouse, > - struct elantech_device_info *info) > -{ > - if (ETP_NEW_IC_SMBUS_HOST_NOTIFY(info->fw_version)) > - return true; > - > - switch (info->bus) { > - case ETP_BUS_PS2_ONLY: > - /* expected case */ > - break; > - case ETP_BUS_SMB_ALERT_ONLY: > - /* fall-through */ > - case ETP_BUS_PS2_SMB_ALERT: > - psmouse_dbg(psmouse, "Ignoring SMBus provider through alert protocol.\n"); > - break; > - case ETP_BUS_SMB_HST_NTFY_ONLY: > - /* fall-through */ > - case ETP_BUS_PS2_SMB_HST_NTFY: > - return true; > - default: > - psmouse_dbg(psmouse, > - "Ignoring SMBus bus provider %d.\n", > - info->bus); > - } > - > - return false; > -} > - > int elantech_init_smbus(struct psmouse *psmouse) > { > struct elantech_device_info info; > -- > 2.17.1 >
> On Jan 17, 2019, at 10:42 PM, Benjamin Tissoires <benjamin.tissoires@redhat.com> wrote: > > Hi Kai-Heng, > > On Thu, Jan 17, 2019 at 10:30 AM Kai-Heng Feng > <kai.heng.feng@canonical.com> wrote: >> >> There are some new HP laptops with Elantech touchpad don't support >> multitouch. >> >> Both ETP_BUS_SMB_HST_NTFY_ONLY and ETP_BUS_PS2_SMB_HST_NTFY devices can >> use SMBus to support 5 fingers touch, so we need to chech them too. >> >> So use elantech_use_host_notify() to do a more thouroughly check. >> >> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> >> --- >> drivers/input/mouse/elantech.c | 58 +++++++++++++++++----------------- >> 1 file changed, 29 insertions(+), 29 deletions(-) >> >> diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c >> index 9fe075c137dc..5bcf1c147eb1 100644 >> --- a/drivers/input/mouse/elantech.c >> +++ b/drivers/input/mouse/elantech.c >> @@ -1799,6 +1799,34 @@ static int elantech_create_smbus(struct psmouse *psmouse, >> leave_breadcrumbs); >> } >> >> +static bool elantech_use_host_notify(struct psmouse *psmouse, >> + struct elantech_device_info *info) >> +{ >> + if (ETP_NEW_IC_SMBUS_HOST_NOTIFY(info->fw_version)) >> + return true; >> + >> + switch (info->bus) { >> + case ETP_BUS_PS2_ONLY: >> + /* expected case */ >> + break; >> + case ETP_BUS_SMB_ALERT_ONLY: >> + /* fall-through */ >> + case ETP_BUS_PS2_SMB_ALERT: >> + psmouse_dbg(psmouse, "Ignoring SMBus provider through alert protocol.\n"); >> + break; >> + case ETP_BUS_SMB_HST_NTFY_ONLY: >> + /* fall-through */ >> + case ETP_BUS_PS2_SMB_HST_NTFY: >> + return true; >> + default: >> + psmouse_dbg(psmouse, >> + "Ignoring SMBus bus provider %d.\n", >> + info->bus); >> + } >> + >> + return false; >> +} >> + >> /** >> * elantech_setup_smbus - called once the PS/2 devices are enumerated >> * and decides to instantiate a SMBus InterTouch device. >> @@ -1818,7 +1846,7 @@ static int elantech_setup_smbus(struct psmouse *psmouse, >> * i2c_blacklist_pnp_ids. >> * Old ICs are up to the user to decide. >> */ >> - if (!ETP_NEW_IC_SMBUS_HOST_NOTIFY(info->fw_version) || >> + if (!elantech_use_host_notify(psmouse, info) || > > That was my initial approach of the series, but I ended up being more > conservative as this would flip all of the existing elantech SMBUS > capable touchpads to use elan_i2c. > And I didn't want to deal with 4/5 year old laptops that suddenly broke. > > So I wonder if you can restrict this default change to the recent > laptops (let's say 2018+). Maybe by looking at their FW version or > something else in the DMI? It was KT who told me that I should use ETP_BUS_PS2_SMB_HST_NTFY. As for date, KT still knows better than me. KT, Can you name a year which is safe enough to enable SMBus? Kai-Heng > > Cheers, > Benjamin > >> psmouse_matches_pnp_id(psmouse, i2c_blacklist_pnp_ids)) >> return -ENXIO; >> } >> @@ -1838,34 +1866,6 @@ static int elantech_setup_smbus(struct psmouse *psmouse, >> return 0; >> } >> >> -static bool elantech_use_host_notify(struct psmouse *psmouse, >> - struct elantech_device_info *info) >> -{ >> - if (ETP_NEW_IC_SMBUS_HOST_NOTIFY(info->fw_version)) >> - return true; >> - >> - switch (info->bus) { >> - case ETP_BUS_PS2_ONLY: >> - /* expected case */ >> - break; >> - case ETP_BUS_SMB_ALERT_ONLY: >> - /* fall-through */ >> - case ETP_BUS_PS2_SMB_ALERT: >> - psmouse_dbg(psmouse, "Ignoring SMBus provider through alert protocol.\n"); >> - break; >> - case ETP_BUS_SMB_HST_NTFY_ONLY: >> - /* fall-through */ >> - case ETP_BUS_PS2_SMB_HST_NTFY: >> - return true; >> - default: >> - psmouse_dbg(psmouse, >> - "Ignoring SMBus bus provider %d.\n", >> - info->bus); >> - } >> - >> - return false; >> -} >> - >> int elantech_init_smbus(struct psmouse *psmouse) >> { >> struct elantech_device_info info; >> -- >> 2.17.1
-----Original Message----- From: Kai Heng Feng [mailto:kai.heng.feng@canonical.com] Sent: Friday, January 18, 2019 12:15 AM To: Benjamin Tissoires Cc: Dmitry Torokhov; 廖崇榮; open list:HID CORE LAYER; lkml Subject: Re: [PATCH 1/1] Input: elantech: Use SMBus based on bus info > On Jan 17, 2019, at 10:42 PM, Benjamin Tissoires <benjamin.tissoires@redhat.com> wrote: > > Hi Kai-Heng, > > On Thu, Jan 17, 2019 at 10:30 AM Kai-Heng Feng > <kai.heng.feng@canonical.com> wrote: >> >> There are some new HP laptops with Elantech touchpad don't support >> multitouch. >> >> Both ETP_BUS_SMB_HST_NTFY_ONLY and ETP_BUS_PS2_SMB_HST_NTFY devices >> can use SMBus to support 5 fingers touch, so we need to chech them too. >> >> So use elantech_use_host_notify() to do a more thouroughly check. >> >> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> >> --- >> drivers/input/mouse/elantech.c | 58 >> +++++++++++++++++----------------- >> 1 file changed, 29 insertions(+), 29 deletions(-) >> >> diff --git a/drivers/input/mouse/elantech.c >> b/drivers/input/mouse/elantech.c index 9fe075c137dc..5bcf1c147eb1 >> 100644 >> --- a/drivers/input/mouse/elantech.c >> +++ b/drivers/input/mouse/elantech.c >> @@ -1799,6 +1799,34 @@ static int elantech_create_smbus(struct psmouse *psmouse, >> leave_breadcrumbs); } >> >> +static bool elantech_use_host_notify(struct psmouse *psmouse, >> + struct elantech_device_info >> +*info) { >> + if (ETP_NEW_IC_SMBUS_HOST_NOTIFY(info->fw_version)) >> + return true; >> + >> + switch (info->bus) { >> + case ETP_BUS_PS2_ONLY: >> + /* expected case */ >> + break; >> + case ETP_BUS_SMB_ALERT_ONLY: >> + /* fall-through */ >> + case ETP_BUS_PS2_SMB_ALERT: >> + psmouse_dbg(psmouse, "Ignoring SMBus provider through alert protocol.\n"); >> + break; >> + case ETP_BUS_SMB_HST_NTFY_ONLY: >> + /* fall-through */ >> + case ETP_BUS_PS2_SMB_HST_NTFY: >> + return true; >> + default: >> + psmouse_dbg(psmouse, >> + "Ignoring SMBus bus provider %d.\n", >> + info->bus); >> + } >> + >> + return false; >> +} >> + >> /** >> * elantech_setup_smbus - called once the PS/2 devices are enumerated >> * and decides to instantiate a SMBus InterTouch device. >> @@ -1818,7 +1846,7 @@ static int elantech_setup_smbus(struct psmouse *psmouse, >> * i2c_blacklist_pnp_ids. >> * Old ICs are up to the user to decide. >> */ >> - if (!ETP_NEW_IC_SMBUS_HOST_NOTIFY(info->fw_version) || >> + if (!elantech_use_host_notify(psmouse, info) || > > That was my initial approach of the series, but I ended up being more > conservative as this would flip all of the existing elantech SMBUS > capable touchpads to use elan_i2c. > And I didn't want to deal with 4/5 year old laptops that suddenly broke. > > So I wonder if you can restrict this default change to the recent > laptops (let's say 2018+). Maybe by looking at their FW version or > something else in the DMI? It was KT who told me that I should use ETP_BUS_PS2_SMB_HST_NTFY. As for date, KT still knows better than me. KT, Can you name a year which is safe enough to enable SMBus? I have discussed it internally. The internal rule for FW's SMbus implementation is stable after 2018 If you meet some special case, please let me know. BTW, The SMbus supporting is requested by HP this time, and there are plenty of HP laptop use old IC which doesn't meet " ETP_NEW_IC_SMBUS_HOST_NOTIFY". Elan touchpad works well in PS/2 for HP, because it don't support TrackPoint. You may let old HP platform work as PS/2 for safety. Thanks KT Kai-Heng > > Cheers, > Benjamin > >> psmouse_matches_pnp_id(psmouse, i2c_blacklist_pnp_ids)) >> return -ENXIO; >> } >> @@ -1838,34 +1866,6 @@ static int elantech_setup_smbus(struct psmouse *psmouse, >> return 0; >> } >> >> -static bool elantech_use_host_notify(struct psmouse *psmouse, >> - struct elantech_device_info *info) >> -{ >> - if (ETP_NEW_IC_SMBUS_HOST_NOTIFY(info->fw_version)) >> - return true; >> - >> - switch (info->bus) { >> - case ETP_BUS_PS2_ONLY: >> - /* expected case */ >> - break; >> - case ETP_BUS_SMB_ALERT_ONLY: >> - /* fall-through */ >> - case ETP_BUS_PS2_SMB_ALERT: >> - psmouse_dbg(psmouse, "Ignoring SMBus provider through alert protocol.\n"); >> - break; >> - case ETP_BUS_SMB_HST_NTFY_ONLY: >> - /* fall-through */ >> - case ETP_BUS_PS2_SMB_HST_NTFY: >> - return true; >> - default: >> - psmouse_dbg(psmouse, >> - "Ignoring SMBus bus provider %d.\n", >> - info->bus); >> - } >> - >> - return false; >> -} >> - >> int elantech_init_smbus(struct psmouse *psmouse) { >> struct elantech_device_info info; >> -- >> 2.17.1
> On Jan 18, 2019, at 17:29, 廖崇榮 <kt.liao@emc.com.tw> wrote: > > > > -----Original Message----- > From: Kai Heng Feng [mailto:kai.heng.feng@canonical.com] > Sent: Friday, January 18, 2019 12:15 AM > To: Benjamin Tissoires > Cc: Dmitry Torokhov; 廖崇榮; open list:HID CORE LAYER; lkml > Subject: Re: [PATCH 1/1] Input: elantech: Use SMBus based on bus info > > > >> On Jan 17, 2019, at 10:42 PM, Benjamin Tissoires > <benjamin.tissoires@redhat.com> wrote: >> >> Hi Kai-Heng, >> >> On Thu, Jan 17, 2019 at 10:30 AM Kai-Heng Feng >> <kai.heng.feng@canonical.com> wrote: >>> >>> There are some new HP laptops with Elantech touchpad don't support >>> multitouch. >>> >>> Both ETP_BUS_SMB_HST_NTFY_ONLY and ETP_BUS_PS2_SMB_HST_NTFY devices >>> can use SMBus to support 5 fingers touch, so we need to chech them too. >>> >>> So use elantech_use_host_notify() to do a more thouroughly check. >>> >>> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> >>> --- >>> drivers/input/mouse/elantech.c | 58 >>> +++++++++++++++++----------------- >>> 1 file changed, 29 insertions(+), 29 deletions(-) >>> >>> diff --git a/drivers/input/mouse/elantech.c >>> b/drivers/input/mouse/elantech.c index 9fe075c137dc..5bcf1c147eb1 >>> 100644 >>> --- a/drivers/input/mouse/elantech.c >>> +++ b/drivers/input/mouse/elantech.c >>> @@ -1799,6 +1799,34 @@ static int elantech_create_smbus(struct psmouse > *psmouse, >>> leave_breadcrumbs); } >>> >>> +static bool elantech_use_host_notify(struct psmouse *psmouse, >>> + struct elantech_device_info >>> +*info) { >>> + if (ETP_NEW_IC_SMBUS_HOST_NOTIFY(info->fw_version)) >>> + return true; >>> + >>> + switch (info->bus) { >>> + case ETP_BUS_PS2_ONLY: >>> + /* expected case */ >>> + break; >>> + case ETP_BUS_SMB_ALERT_ONLY: >>> + /* fall-through */ >>> + case ETP_BUS_PS2_SMB_ALERT: >>> + psmouse_dbg(psmouse, "Ignoring SMBus provider through > alert protocol.\n"); >>> + break; >>> + case ETP_BUS_SMB_HST_NTFY_ONLY: >>> + /* fall-through */ >>> + case ETP_BUS_PS2_SMB_HST_NTFY: >>> + return true; >>> + default: >>> + psmouse_dbg(psmouse, >>> + "Ignoring SMBus bus provider %d.\n", >>> + info->bus); >>> + } >>> + >>> + return false; >>> +} >>> + >>> /** >>> * elantech_setup_smbus - called once the PS/2 devices are enumerated >>> * and decides to instantiate a SMBus InterTouch device. >>> @@ -1818,7 +1846,7 @@ static int elantech_setup_smbus(struct psmouse > *psmouse, >>> * i2c_blacklist_pnp_ids. >>> * Old ICs are up to the user to decide. >>> */ >>> - if (!ETP_NEW_IC_SMBUS_HOST_NOTIFY(info->fw_version) || >>> + if (!elantech_use_host_notify(psmouse, info) || >> >> That was my initial approach of the series, but I ended up being more >> conservative as this would flip all of the existing elantech SMBUS >> capable touchpads to use elan_i2c. >> And I didn't want to deal with 4/5 year old laptops that suddenly broke. >> >> So I wonder if you can restrict this default change to the recent >> laptops (let's say 2018+). Maybe by looking at their FW version or >> something else in the DMI? > > It was KT who told me that I should use ETP_BUS_PS2_SMB_HST_NTFY. > > As for date, KT still knows better than me. > > KT, > Can you name a year which is safe enough to enable SMBus? > > I have discussed it internally. > The internal rule for FW's SMbus implementation is stable after 2018 > If you meet some special case, please let me know. Thanks for the info. I’ll use this for the V2 patch. > > BTW, The SMbus supporting is requested by HP this time, and there are plenty > of HP laptop use old IC > which doesn't meet " ETP_NEW_IC_SMBUS_HOST_NOTIFY”. One more question, does ETP_BUS_SMB_HST_NTFY_ONLY means it should stick to SMBus, because it doesn’t support PS/2? I’d like to merge all checks into elantech_use_host_notify() but ETP_BUS_SMB_HST_NTFY_ONLY caught my attention. Kai-Heng > > Elan touchpad works well in PS/2 for HP, because it don't support > TrackPoint. > You may let old HP platform work as PS/2 for safety. > > Thanks > KT > > Kai-Heng > >> >> Cheers, >> Benjamin >> >>> psmouse_matches_pnp_id(psmouse, > i2c_blacklist_pnp_ids)) >>> return -ENXIO; >>> } >>> @@ -1838,34 +1866,6 @@ static int elantech_setup_smbus(struct psmouse > *psmouse, >>> return 0; >>> } >>> >>> -static bool elantech_use_host_notify(struct psmouse *psmouse, >>> - struct elantech_device_info *info) >>> -{ >>> - if (ETP_NEW_IC_SMBUS_HOST_NOTIFY(info->fw_version)) >>> - return true; >>> - >>> - switch (info->bus) { >>> - case ETP_BUS_PS2_ONLY: >>> - /* expected case */ >>> - break; >>> - case ETP_BUS_SMB_ALERT_ONLY: >>> - /* fall-through */ >>> - case ETP_BUS_PS2_SMB_ALERT: >>> - psmouse_dbg(psmouse, "Ignoring SMBus provider through > alert protocol.\n"); >>> - break; >>> - case ETP_BUS_SMB_HST_NTFY_ONLY: >>> - /* fall-through */ >>> - case ETP_BUS_PS2_SMB_HST_NTFY: >>> - return true; >>> - default: >>> - psmouse_dbg(psmouse, >>> - "Ignoring SMBus bus provider %d.\n", >>> - info->bus); >>> - } >>> - >>> - return false; >>> -} >>> - >>> int elantech_init_smbus(struct psmouse *psmouse) { >>> struct elantech_device_info info; >>> -- >>> 2.17.1 >
-----Original Message----- From: Kai-Heng Feng [mailto:kai.heng.feng@canonical.com] Sent: Monday, January 21, 2019 12:28 PM To: 廖崇榮 Cc: Benjamin Tissoires; Dmitry Torokhov; open list:HID CORE LAYER; lkml Subject: Re: [PATCH 1/1] Input: elantech: Use SMBus based on bus info > On Jan 18, 2019, at 17:29, 廖崇榮 <kt.liao@emc.com.tw> wrote: > > > > -----Original Message----- > From: Kai Heng Feng [mailto:kai.heng.feng@canonical.com] > Sent: Friday, January 18, 2019 12:15 AM > To: Benjamin Tissoires > Cc: Dmitry Torokhov; 廖崇榮; open list:HID CORE LAYER; lkml > Subject: Re: [PATCH 1/1] Input: elantech: Use SMBus based on bus info > > > >> On Jan 17, 2019, at 10:42 PM, Benjamin Tissoires > <benjamin.tissoires@redhat.com> wrote: >> >> Hi Kai-Heng, >> >> On Thu, Jan 17, 2019 at 10:30 AM Kai-Heng Feng >> <kai.heng.feng@canonical.com> wrote: >>> >>> There are some new HP laptops with Elantech touchpad don't support >>> multitouch. >>> >>> Both ETP_BUS_SMB_HST_NTFY_ONLY and ETP_BUS_PS2_SMB_HST_NTFY devices >>> can use SMBus to support 5 fingers touch, so we need to chech them too. >>> >>> So use elantech_use_host_notify() to do a more thouroughly check. >>> >>> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> >>> --- >>> drivers/input/mouse/elantech.c | 58 >>> +++++++++++++++++----------------- >>> 1 file changed, 29 insertions(+), 29 deletions(-) >>> >>> diff --git a/drivers/input/mouse/elantech.c >>> b/drivers/input/mouse/elantech.c index 9fe075c137dc..5bcf1c147eb1 >>> 100644 >>> --- a/drivers/input/mouse/elantech.c >>> +++ b/drivers/input/mouse/elantech.c >>> @@ -1799,6 +1799,34 @@ static int elantech_create_smbus(struct >>> psmouse > *psmouse, >>> leave_breadcrumbs); } >>> >>> +static bool elantech_use_host_notify(struct psmouse *psmouse, >>> + struct elantech_device_info >>> +*info) { >>> + if (ETP_NEW_IC_SMBUS_HOST_NOTIFY(info->fw_version)) >>> + return true; >>> + >>> + switch (info->bus) { >>> + case ETP_BUS_PS2_ONLY: >>> + /* expected case */ >>> + break; >>> + case ETP_BUS_SMB_ALERT_ONLY: >>> + /* fall-through */ >>> + case ETP_BUS_PS2_SMB_ALERT: >>> + psmouse_dbg(psmouse, "Ignoring SMBus provider >>> + through > alert protocol.\n"); >>> + break; >>> + case ETP_BUS_SMB_HST_NTFY_ONLY: >>> + /* fall-through */ >>> + case ETP_BUS_PS2_SMB_HST_NTFY: >>> + return true; >>> + default: >>> + psmouse_dbg(psmouse, >>> + "Ignoring SMBus bus provider %d.\n", >>> + info->bus); >>> + } >>> + >>> + return false; >>> +} >>> + >>> /** >>> * elantech_setup_smbus - called once the PS/2 devices are enumerated >>> * and decides to instantiate a SMBus InterTouch device. >>> @@ -1818,7 +1846,7 @@ static int elantech_setup_smbus(struct psmouse > *psmouse, >>> * i2c_blacklist_pnp_ids. >>> * Old ICs are up to the user to decide. >>> */ >>> - if (!ETP_NEW_IC_SMBUS_HOST_NOTIFY(info->fw_version) || >>> + if (!elantech_use_host_notify(psmouse, info) || >> >> That was my initial approach of the series, but I ended up being more >> conservative as this would flip all of the existing elantech SMBUS >> capable touchpads to use elan_i2c. >> And I didn't want to deal with 4/5 year old laptops that suddenly broke. >> >> So I wonder if you can restrict this default change to the recent >> laptops (let's say 2018+). Maybe by looking at their FW version or >> something else in the DMI? > > It was KT who told me that I should use ETP_BUS_PS2_SMB_HST_NTFY. > > As for date, KT still knows better than me. > > KT, > Can you name a year which is safe enough to enable SMBus? > > I have discussed it internally. > The internal rule for FW's SMbus implementation is stable after 2018 > If you meet some special case, please let me know. Thanks for the info. I’ll use this for the V2 patch. > > BTW, The SMbus supporting is requested by HP this time, and there are > plenty of HP laptop use old IC which doesn't meet " > ETP_NEW_IC_SMBUS_HOST_NOTIFY”. One more question, does ETP_BUS_SMB_HST_NTFY_ONLY means it should stick to SMBus, because it doesn’t support PS/2? I’d like to merge all checks into elantech_use_host_notify() but ETP_BUS_SMB_HST_NTFY_ONLY caught my attention. ETP_BUS_SMB_HST_NTFY_ONLY is for our previous planning but it never happen so far, and it won't happen in the future. There are two cases for our released touchpad and they are " ETP_BUS_PS2_ONLY" and " ETP_BUS_PS2_SMB_HST_NTFY". Thanks KT Kai-Heng > > Elan touchpad works well in PS/2 for HP, because it don't support > TrackPoint. > You may let old HP platform work as PS/2 for safety. > > Thanks > KT > > Kai-Heng > >> >> Cheers, >> Benjamin >> >>> psmouse_matches_pnp_id(psmouse, > i2c_blacklist_pnp_ids)) >>> return -ENXIO; >>> } >>> @@ -1838,34 +1866,6 @@ static int elantech_setup_smbus(struct >>> psmouse > *psmouse, >>> return 0; >>> } >>> >>> -static bool elantech_use_host_notify(struct psmouse *psmouse, >>> - struct elantech_device_info *info) >>> -{ >>> - if (ETP_NEW_IC_SMBUS_HOST_NOTIFY(info->fw_version)) >>> - return true; >>> - >>> - switch (info->bus) { >>> - case ETP_BUS_PS2_ONLY: >>> - /* expected case */ >>> - break; >>> - case ETP_BUS_SMB_ALERT_ONLY: >>> - /* fall-through */ >>> - case ETP_BUS_PS2_SMB_ALERT: >>> - psmouse_dbg(psmouse, "Ignoring SMBus provider through > alert protocol.\n"); >>> - break; >>> - case ETP_BUS_SMB_HST_NTFY_ONLY: >>> - /* fall-through */ >>> - case ETP_BUS_PS2_SMB_HST_NTFY: >>> - return true; >>> - default: >>> - psmouse_dbg(psmouse, >>> - "Ignoring SMBus bus provider %d.\n", >>> - info->bus); >>> - } >>> - >>> - return false; >>> -} >>> - >>> int elantech_init_smbus(struct psmouse *psmouse) { >>> struct elantech_device_info info; >>> -- >>> 2.17.1 >
diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index 9fe075c137dc..5bcf1c147eb1 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -1799,6 +1799,34 @@ static int elantech_create_smbus(struct psmouse *psmouse, leave_breadcrumbs); } +static bool elantech_use_host_notify(struct psmouse *psmouse, + struct elantech_device_info *info) +{ + if (ETP_NEW_IC_SMBUS_HOST_NOTIFY(info->fw_version)) + return true; + + switch (info->bus) { + case ETP_BUS_PS2_ONLY: + /* expected case */ + break; + case ETP_BUS_SMB_ALERT_ONLY: + /* fall-through */ + case ETP_BUS_PS2_SMB_ALERT: + psmouse_dbg(psmouse, "Ignoring SMBus provider through alert protocol.\n"); + break; + case ETP_BUS_SMB_HST_NTFY_ONLY: + /* fall-through */ + case ETP_BUS_PS2_SMB_HST_NTFY: + return true; + default: + psmouse_dbg(psmouse, + "Ignoring SMBus bus provider %d.\n", + info->bus); + } + + return false; +} + /** * elantech_setup_smbus - called once the PS/2 devices are enumerated * and decides to instantiate a SMBus InterTouch device. @@ -1818,7 +1846,7 @@ static int elantech_setup_smbus(struct psmouse *psmouse, * i2c_blacklist_pnp_ids. * Old ICs are up to the user to decide. */ - if (!ETP_NEW_IC_SMBUS_HOST_NOTIFY(info->fw_version) || + if (!elantech_use_host_notify(psmouse, info) || psmouse_matches_pnp_id(psmouse, i2c_blacklist_pnp_ids)) return -ENXIO; } @@ -1838,34 +1866,6 @@ static int elantech_setup_smbus(struct psmouse *psmouse, return 0; } -static bool elantech_use_host_notify(struct psmouse *psmouse, - struct elantech_device_info *info) -{ - if (ETP_NEW_IC_SMBUS_HOST_NOTIFY(info->fw_version)) - return true; - - switch (info->bus) { - case ETP_BUS_PS2_ONLY: - /* expected case */ - break; - case ETP_BUS_SMB_ALERT_ONLY: - /* fall-through */ - case ETP_BUS_PS2_SMB_ALERT: - psmouse_dbg(psmouse, "Ignoring SMBus provider through alert protocol.\n"); - break; - case ETP_BUS_SMB_HST_NTFY_ONLY: - /* fall-through */ - case ETP_BUS_PS2_SMB_HST_NTFY: - return true; - default: - psmouse_dbg(psmouse, - "Ignoring SMBus bus provider %d.\n", - info->bus); - } - - return false; -} - int elantech_init_smbus(struct psmouse *psmouse) { struct elantech_device_info info;
There are some new HP laptops with Elantech touchpad don't support multitouch. Both ETP_BUS_SMB_HST_NTFY_ONLY and ETP_BUS_PS2_SMB_HST_NTFY devices can use SMBus to support 5 fingers touch, so we need to chech them too. So use elantech_use_host_notify() to do a more thouroughly check. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> --- drivers/input/mouse/elantech.c | 58 +++++++++++++++++----------------- 1 file changed, 29 insertions(+), 29 deletions(-)