@@ -1,4 +1,4 @@
-occ-hwmon-objs := common.o
+occ-hwmon-objs := common.o sysfs.o
ifeq ($(CONFIG_SENSORS_OCC_P9_SBE), y)
occ-hwmon-objs += p9_sbe.o
@@ -21,6 +21,11 @@
#include "common.h"
+#define OCC_ERROR_COUNT_THRESHOLD 2 /* required by OCC spec */
+
+#define OCC_STATE_SAFE 4
+#define OCC_SAFE_TIMEOUT msecs_to_jiffies(60000) /* 1 min */
+
#define OCC_UPDATE_FREQUENCY msecs_to_jiffies(1000)
#define OCC_TEMP_SENSOR_FAULT 0xFF
@@ -128,8 +133,10 @@ struct extended_sensor {
static int occ_poll(struct occ *occ)
{
+ int rc;
u16 checksum = occ->poll_cmd_data + 1;
u8 cmd[8];
+ struct occ_poll_response_header *header;
/* big endian */
cmd[0] = 0; /* sequence number */
@@ -142,7 +149,35 @@ static int occ_poll(struct occ *occ)
cmd[7] = 0;
/* mutex should already be locked if necessary */
- return occ->send_cmd(occ, cmd);
+ rc = occ->send_cmd(occ, cmd);
+ if (rc) {
+ if (occ->error_count++ > OCC_ERROR_COUNT_THRESHOLD)
+ occ->error = rc;
+
+ goto done;
+ }
+
+ /* clear error since communication was successful */
+ occ->error_count = 0;
+ occ->error = 0;
+
+ /* check for safe state */
+ header = (struct occ_poll_response_header *)occ->resp.data;
+ if (header->occ_state == OCC_STATE_SAFE) {
+ if (occ->last_safe) {
+ if (time_after(jiffies,
+ occ->last_safe + OCC_SAFE_TIMEOUT))
+ occ->error = -EHOSTDOWN;
+ } else {
+ occ->last_safe = jiffies;
+ }
+ } else {
+ occ->last_safe = 0;
+ }
+
+done:
+ occ_sysfs_poll_done(occ);
+ return rc;
}
static int occ_set_user_power_cap(struct occ *occ, u16 user_power_cap)
@@ -174,7 +209,7 @@ static int occ_set_user_power_cap(struct occ *occ, u16 user_power_cap)
return rc;
}
-static int occ_update_response(struct occ *occ)
+int occ_update_response(struct occ *occ)
{
int rc = mutex_lock_interruptible(&occ->lock);
@@ -1207,5 +1242,9 @@ int occ_setup(struct occ *occ, const char *name)
return rc;
}
- return 0;
+ rc = occ_setup_sysfs(occ);
+ if (rc)
+ dev_err(occ->bus_dev, "failed to setup sysfs: %d\n", rc);
+
+ return rc;
}
@@ -112,8 +112,25 @@ struct occ {
struct occ_attribute *attrs;
struct attribute_group group;
const struct attribute_group *groups[2];
+
+ int error; /* latest transfer error */
+ unsigned int error_count; /* number of xfr errors observed */
+ unsigned long last_safe; /* time OCC entered "safe" state */
+
+ /*
+ * Store the previous state data for comparison in order to notify
+ * sysfs readers of state changes.
+ */
+ int prev_error;
+ u8 prev_stat;
+ u8 prev_ext_stat;
+ u8 prev_occs_present;
};
int occ_setup(struct occ *occ, const char *name);
+int occ_setup_sysfs(struct occ *occ);
+void occ_shutdown(struct occ *occ);
+void occ_sysfs_poll_done(struct occ *occ);
+int occ_update_response(struct occ *occ);
#endif /* OCC_COMMON_H */
@@ -232,6 +232,15 @@ static int p8_i2c_occ_probe(struct i2c_client *client,
return occ_setup(occ, "p8_occ");
}
+static int p8_i2c_occ_remove(struct i2c_client *client)
+{
+ struct occ *occ = dev_get_drvdata(&client->dev);
+
+ occ_shutdown(occ);
+
+ return 0;
+}
+
static const struct of_device_id p8_i2c_occ_of_match[] = {
{ .compatible = "ibm,p8-occ-hwmon" },
{}
@@ -245,6 +254,7 @@ static int p8_i2c_occ_probe(struct i2c_client *client,
.of_match_table = p8_i2c_occ_of_match,
},
.probe = p8_i2c_occ_probe,
+ .remove = p8_i2c_occ_remove,
};
module_i2c_driver(p8_i2c_occ_driver);
@@ -95,6 +95,7 @@ static int p9_sbe_occ_remove(struct platform_device *pdev)
struct p9_sbe_occ *ctx = to_p9_sbe_occ(occ);
ctx->sbe = NULL;
+ occ_shutdown(occ);
return 0;
}
new file mode 100644
@@ -0,0 +1,188 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * OCC hwmon driver sysfs interface
+ *
+ * Copyright (C) IBM Corporation 2018
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/kernel.h>
+#include <linux/sysfs.h>
+
+#include "common.h"
+
+/* OCC status register */
+#define OCC_STAT_MASTER BIT(7)
+#define OCC_STAT_ACTIVE BIT(0)
+
+/* OCC extended status register */
+#define OCC_EXT_STAT_DVFS_OT BIT(7)
+#define OCC_EXT_STAT_DVFS_POWER BIT(6)
+#define OCC_EXT_STAT_MEM_THROTTLE BIT(5)
+#define OCC_EXT_STAT_QUICK_DROP BIT(4)
+
+static ssize_t occ_sysfs_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int rc;
+ int val = 0;
+ struct occ *occ = dev_get_drvdata(dev);
+ struct occ_poll_response_header *header;
+ struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
+
+ rc = occ_update_response(occ);
+ if (rc)
+ return rc;
+
+ header = (struct occ_poll_response_header *)occ->resp.data;
+
+ switch (sattr->index) {
+ case 0:
+ val = !!(header->status & OCC_STAT_MASTER);
+ break;
+ case 1:
+ val = !!(header->status & OCC_STAT_ACTIVE);
+ break;
+ case 2:
+ val = !!(header->status & OCC_EXT_STAT_DVFS_OT);
+ break;
+ case 3:
+ val = !!(header->status & OCC_EXT_STAT_DVFS_POWER);
+ break;
+ case 4:
+ val = !!(header->status & OCC_EXT_STAT_MEM_THROTTLE);
+ break;
+ case 5:
+ val = !!(header->status & OCC_EXT_STAT_QUICK_DROP);
+ break;
+ case 6:
+ val = header->occ_state;
+ break;
+ case 7:
+ if (header->status & OCC_STAT_MASTER)
+ val = hweight8(header->occs_present);
+ else
+ val = 1;
+ break;
+ case 8:
+ val = occ->error;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return snprintf(buf, PAGE_SIZE - 1, "%d\n", val);
+}
+
+static SENSOR_DEVICE_ATTR(occ_master, 0444, occ_sysfs_show, NULL, 0);
+static SENSOR_DEVICE_ATTR(occ_active, 0444, occ_sysfs_show, NULL, 1);
+static SENSOR_DEVICE_ATTR(occ_dvfs_overtemp, 0444, occ_sysfs_show, NULL, 2);
+static SENSOR_DEVICE_ATTR(occ_dvfs_power, 0444, occ_sysfs_show, NULL, 3);
+static SENSOR_DEVICE_ATTR(occ_mem_throttle, 0444, occ_sysfs_show, NULL, 4);
+static SENSOR_DEVICE_ATTR(occ_quick_pwr_drop, 0444, occ_sysfs_show, NULL, 5);
+static SENSOR_DEVICE_ATTR(occ_state, 0444, occ_sysfs_show, NULL, 6);
+static SENSOR_DEVICE_ATTR(occs_present, 0444, occ_sysfs_show, NULL, 7);
+static SENSOR_DEVICE_ATTR(occ_error, 0444, occ_sysfs_show, NULL, 8);
+
+static struct attribute *occ_attributes[] = {
+ &sensor_dev_attr_occ_master.dev_attr.attr,
+ &sensor_dev_attr_occ_active.dev_attr.attr,
+ &sensor_dev_attr_occ_dvfs_overtemp.dev_attr.attr,
+ &sensor_dev_attr_occ_dvfs_power.dev_attr.attr,
+ &sensor_dev_attr_occ_mem_throttle.dev_attr.attr,
+ &sensor_dev_attr_occ_quick_pwr_drop.dev_attr.attr,
+ &sensor_dev_attr_occ_state.dev_attr.attr,
+ &sensor_dev_attr_occs_present.dev_attr.attr,
+ &sensor_dev_attr_occ_error.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group occ_sysfs = {
+ .attrs = occ_attributes,
+};
+
+void occ_sysfs_poll_done(struct occ *occ)
+{
+ const char *name;
+ struct occ_poll_response_header *header =
+ (struct occ_poll_response_header *)occ->resp.data;
+
+ /*
+ * On the first poll response, we haven't yet created the sysfs
+ * attributes, so don't make any notify calls.
+ */
+ if (!occ->hwmon)
+ goto done;
+
+ if ((header->status & OCC_STAT_MASTER) !=
+ (occ->prev_stat & OCC_STAT_MASTER)) {
+ name = sensor_dev_attr_occ_master.dev_attr.attr.name;
+ sysfs_notify(&occ->bus_dev->kobj, NULL, name);
+ }
+
+ if ((header->status & OCC_STAT_ACTIVE) !=
+ (occ->prev_stat & OCC_STAT_ACTIVE)) {
+ name = sensor_dev_attr_occ_active.dev_attr.attr.name;
+ sysfs_notify(&occ->bus_dev->kobj, NULL, name);
+ }
+
+ if ((header->ext_status & OCC_EXT_STAT_DVFS_OT) !=
+ (occ->prev_ext_stat & OCC_EXT_STAT_DVFS_OT)) {
+ name = sensor_dev_attr_occ_dvfs_overtemp.dev_attr.attr.name;
+ sysfs_notify(&occ->bus_dev->kobj, NULL, name);
+ }
+
+ if ((header->ext_status & OCC_EXT_STAT_DVFS_POWER) !=
+ (occ->prev_ext_stat & OCC_EXT_STAT_DVFS_POWER)) {
+ name = sensor_dev_attr_occ_dvfs_power.dev_attr.attr.name;
+ sysfs_notify(&occ->bus_dev->kobj, NULL, name);
+ }
+
+ if ((header->ext_status & OCC_EXT_STAT_MEM_THROTTLE) !=
+ (occ->prev_ext_stat & OCC_EXT_STAT_MEM_THROTTLE)) {
+ name = sensor_dev_attr_occ_mem_throttle.dev_attr.attr.name;
+ sysfs_notify(&occ->bus_dev->kobj, NULL, name);
+ }
+
+ if ((header->ext_status & OCC_EXT_STAT_QUICK_DROP) !=
+ (occ->prev_ext_stat & OCC_EXT_STAT_QUICK_DROP)) {
+ name = sensor_dev_attr_occ_quick_pwr_drop.dev_attr.attr.name;
+ sysfs_notify(&occ->bus_dev->kobj, NULL, name);
+ }
+
+ if ((header->status & OCC_STAT_MASTER) &&
+ header->occs_present != occ->prev_occs_present) {
+ name = sensor_dev_attr_occs_present.dev_attr.attr.name;
+ sysfs_notify(&occ->bus_dev->kobj, NULL, name);
+ }
+
+ if (occ->error && occ->error != occ->prev_error) {
+ name = sensor_dev_attr_occ_error.dev_attr.attr.name;
+ sysfs_notify(&occ->bus_dev->kobj, NULL, name);
+ }
+
+ /* no notifications for OCC state; doesn't indicate error condition */
+
+done:
+ occ->prev_error = occ->error;
+ occ->prev_stat = header->status;
+ occ->prev_ext_stat = header->ext_status;
+ occ->prev_occs_present = header->occs_present;
+}
+
+int occ_setup_sysfs(struct occ *occ)
+{
+ return sysfs_create_group(&occ->bus_dev->kobj, &occ_sysfs);
+}
+
+void occ_shutdown(struct occ *occ)
+{
+ sysfs_remove_group(&occ->bus_dev->kobj, &occ_sysfs);
+}
The OCC provides a variety of additional information about the state of the host processor, such as throttling, error conditions, and the number of OCCs detected in the system. This information is essential to service processor applications such as fan control and host management. Therefore, export this data in the form of sysfs attributes attached to the platform device (to which the hwmon device is also attached). Signed-off-by: Eddie James <eajames@linux.vnet.ibm.com> --- drivers/hwmon/occ/Makefile | 2 +- drivers/hwmon/occ/common.c | 45 ++++++++++- drivers/hwmon/occ/common.h | 17 ++++ drivers/hwmon/occ/p8_i2c.c | 10 +++ drivers/hwmon/occ/p9_sbe.c | 1 + drivers/hwmon/occ/sysfs.c | 188 +++++++++++++++++++++++++++++++++++++++++++++ 6 files changed, 259 insertions(+), 4 deletions(-) create mode 100644 drivers/hwmon/occ/sysfs.c