diff mbox series

[2/8] drm/meson: add HDMI div40 TMDS mode

Message ID 20190115123315.11069-3-narmstrong@baylibre.com (mailing list archive)
State New, archived
Headers show
Series drm/meson: Add support for HDMI2.0 4k60 | expand

Commit Message

Neil Armstrong Jan. 15, 2019, 12:33 p.m. UTC
Add support for TMDS Clock > 3.4GHz for HDMI2.0 display modes.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 drivers/gpu/drm/meson/meson_dw_hdmi.c | 23 +++++++++++++++++++----
 1 file changed, 19 insertions(+), 4 deletions(-)

Comments

Andrzej Hajda Jan. 18, 2019, 9:13 a.m. UTC | #1
On 15.01.2019 13:33, Neil Armstrong wrote:
> Add support for TMDS Clock > 3.4GHz for HDMI2.0 display modes.
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
>  drivers/gpu/drm/meson/meson_dw_hdmi.c | 23 +++++++++++++++++++----
>  1 file changed, 19 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c
> index 807111ebfdd9..3d8decb77019 100644
> --- a/drivers/gpu/drm/meson/meson_dw_hdmi.c
> +++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c
> @@ -365,7 +365,8 @@ static int dw_hdmi_phy_init(struct dw_hdmi *hdmi, void *data,
>  	unsigned int wr_clk =
>  		readl_relaxed(priv->io_base + _REG(VPU_HDMI_SETTING));
>  
> -	DRM_DEBUG_DRIVER("%d:\"%s\"\n", mode->base.id, mode->name);
> +	DRM_DEBUG_DRIVER("%d:\"%s\" div%d\n", mode->base.id, mode->name,
> +			 mode->clock > 340000 ? 40 : 10);
>  
>  	/* Enable clocks */
>  	regmap_update_bits(priv->hhi, HHI_HDMI_CLK_CNTL, 0xffff, 0x100);
> @@ -385,9 +386,17 @@ static int dw_hdmi_phy_init(struct dw_hdmi *hdmi, void *data,
>  	/* Enable normal output to PHY */
>  	dw_hdmi_top_write(dw_hdmi, HDMITX_TOP_BIST_CNTL, BIT(12));
>  
> -	/* TMDS pattern setup (TOFIX pattern for 4k2k scrambling) */
> -	dw_hdmi_top_write(dw_hdmi, HDMITX_TOP_TMDS_CLK_PTTN_01, 0x001f001f);
> -	dw_hdmi_top_write(dw_hdmi, HDMITX_TOP_TMDS_CLK_PTTN_23, 0x001f001f);
> +	/* TMDS pattern setup (TOFIX Handle the YUV420 case) */
> +	if (mode->clock > 340000) {
> +		dw_hdmi_top_write(dw_hdmi, HDMITX_TOP_TMDS_CLK_PTTN_01, 0);
> +		dw_hdmi_top_write(dw_hdmi, HDMITX_TOP_TMDS_CLK_PTTN_23,
> +				  0x03ff03ff);
> +	} else {
> +		dw_hdmi_top_write(dw_hdmi, HDMITX_TOP_TMDS_CLK_PTTN_01,
> +				  0x001f001f);
> +		dw_hdmi_top_write(dw_hdmi, HDMITX_TOP_TMDS_CLK_PTTN_23,
> +				  0x001f001f);
> +	}


    val = mode->clock > 340000 ? 0x03ff03ff : 0x001f001f;
    dw_hdmi_top_write(dw_hdmi, HDMITX_TOP_TMDS_CLK_PTTN_01, val);

    dw_hdmi_top_write(dw_hdmi, HDMITX_TOP_TMDS_CLK_PTTN_23, val);


The best would be to replace these magic values with descriptive macros.


Regards

Andrzej


>  
>  	/* Load TMDS pattern */
>  	dw_hdmi_top_write(dw_hdmi, HDMITX_TOP_TMDS_CLK_PTTN_CNTL, 0x1);
> @@ -413,6 +422,8 @@ static int dw_hdmi_phy_init(struct dw_hdmi *hdmi, void *data,
>  	/* Disable clock, fifo, fifo_wr */
>  	regmap_update_bits(priv->hhi, HHI_HDMI_PHY_CNTL1, 0xf, 0);
>  
> +	dw_hdmi_set_high_tmds_clock_ratio(hdmi);
> +
>  	msleep(100);
>  
>  	/* Reset PHY 3 times in a row */
> @@ -562,6 +573,10 @@ dw_hdmi_mode_valid(struct drm_connector *connector,
>  		mode->vdisplay, mode->vsync_start,
>  		mode->vsync_end, mode->vtotal, mode->type, mode->flags);
>  
> +	/* If sink max TMDS clock, we reject the mode */
> +	if (mode->clock > connector->display_info.max_tmds_clock)
> +		return MODE_BAD;
> +
>  	/* Check against non-VIC supported modes */
>  	if (!vic) {
>  		status = meson_venc_hdmi_supported_mode(mode);
Neil Armstrong Jan. 18, 2019, 9:40 a.m. UTC | #2
Hi Andrzej,

On 18/01/2019 10:13, Andrzej Hajda wrote:
> On 15.01.2019 13:33, Neil Armstrong wrote:
>> Add support for TMDS Clock > 3.4GHz for HDMI2.0 display modes.
>>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>> ---
>>  drivers/gpu/drm/meson/meson_dw_hdmi.c | 23 +++++++++++++++++++----
>>  1 file changed, 19 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c
>> index 807111ebfdd9..3d8decb77019 100644
>> --- a/drivers/gpu/drm/meson/meson_dw_hdmi.c
>> +++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c
>> @@ -365,7 +365,8 @@ static int dw_hdmi_phy_init(struct dw_hdmi *hdmi, void *data,
>>  	unsigned int wr_clk =
>>  		readl_relaxed(priv->io_base + _REG(VPU_HDMI_SETTING));
>>  
>> -	DRM_DEBUG_DRIVER("%d:\"%s\"\n", mode->base.id, mode->name);
>> +	DRM_DEBUG_DRIVER("%d:\"%s\" div%d\n", mode->base.id, mode->name,
>> +			 mode->clock > 340000 ? 40 : 10);
>>  
>>  	/* Enable clocks */
>>  	regmap_update_bits(priv->hhi, HHI_HDMI_CLK_CNTL, 0xffff, 0x100);
>> @@ -385,9 +386,17 @@ static int dw_hdmi_phy_init(struct dw_hdmi *hdmi, void *data,
>>  	/* Enable normal output to PHY */
>>  	dw_hdmi_top_write(dw_hdmi, HDMITX_TOP_BIST_CNTL, BIT(12));
>>  
>> -	/* TMDS pattern setup (TOFIX pattern for 4k2k scrambling) */
>> -	dw_hdmi_top_write(dw_hdmi, HDMITX_TOP_TMDS_CLK_PTTN_01, 0x001f001f);
>> -	dw_hdmi_top_write(dw_hdmi, HDMITX_TOP_TMDS_CLK_PTTN_23, 0x001f001f);
>> +	/* TMDS pattern setup (TOFIX Handle the YUV420 case) */
>> +	if (mode->clock > 340000) {
>> +		dw_hdmi_top_write(dw_hdmi, HDMITX_TOP_TMDS_CLK_PTTN_01, 0);
>> +		dw_hdmi_top_write(dw_hdmi, HDMITX_TOP_TMDS_CLK_PTTN_23,
>> +				  0x03ff03ff);
>> +	} else {
>> +		dw_hdmi_top_write(dw_hdmi, HDMITX_TOP_TMDS_CLK_PTTN_01,
>> +				  0x001f001f);
>> +		dw_hdmi_top_write(dw_hdmi, HDMITX_TOP_TMDS_CLK_PTTN_23,
>> +				  0x001f001f);
>> +	}
> 
> 
>     val = mode->clock > 340000 ? 0x03ff03ff : 0x001f001f;
>     dw_hdmi_top_write(dw_hdmi, HDMITX_TOP_TMDS_CLK_PTTN_01, val);
> 
>     dw_hdmi_top_write(dw_hdmi, HDMITX_TOP_TMDS_CLK_PTTN_23, val);
> 
> 
> The best would be to replace these magic values with descriptive macros.

In fact, these are patterns, not sure how to describe them ? it's like a plain number, the value has it's own meaning.


Neil
> 
> 
> Regards
> 
> Andrzej
> 
> 
>>  
>>  	/* Load TMDS pattern */
>>  	dw_hdmi_top_write(dw_hdmi, HDMITX_TOP_TMDS_CLK_PTTN_CNTL, 0x1);
>> @@ -413,6 +422,8 @@ static int dw_hdmi_phy_init(struct dw_hdmi *hdmi, void *data,
>>  	/* Disable clock, fifo, fifo_wr */
>>  	regmap_update_bits(priv->hhi, HHI_HDMI_PHY_CNTL1, 0xf, 0);
>>  
>> +	dw_hdmi_set_high_tmds_clock_ratio(hdmi);
>> +
>>  	msleep(100);
>>  
>>  	/* Reset PHY 3 times in a row */
>> @@ -562,6 +573,10 @@ dw_hdmi_mode_valid(struct drm_connector *connector,
>>  		mode->vdisplay, mode->vsync_start,
>>  		mode->vsync_end, mode->vtotal, mode->type, mode->flags);
>>  
>> +	/* If sink max TMDS clock, we reject the mode */
>> +	if (mode->clock > connector->display_info.max_tmds_clock)
>> +		return MODE_BAD;
>> +
>>  	/* Check against non-VIC supported modes */
>>  	if (!vic) {
>>  		status = meson_venc_hdmi_supported_mode(mode);
> 
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
>
diff mbox series

Patch

diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c
index 807111ebfdd9..3d8decb77019 100644
--- a/drivers/gpu/drm/meson/meson_dw_hdmi.c
+++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c
@@ -365,7 +365,8 @@  static int dw_hdmi_phy_init(struct dw_hdmi *hdmi, void *data,
 	unsigned int wr_clk =
 		readl_relaxed(priv->io_base + _REG(VPU_HDMI_SETTING));
 
-	DRM_DEBUG_DRIVER("%d:\"%s\"\n", mode->base.id, mode->name);
+	DRM_DEBUG_DRIVER("%d:\"%s\" div%d\n", mode->base.id, mode->name,
+			 mode->clock > 340000 ? 40 : 10);
 
 	/* Enable clocks */
 	regmap_update_bits(priv->hhi, HHI_HDMI_CLK_CNTL, 0xffff, 0x100);
@@ -385,9 +386,17 @@  static int dw_hdmi_phy_init(struct dw_hdmi *hdmi, void *data,
 	/* Enable normal output to PHY */
 	dw_hdmi_top_write(dw_hdmi, HDMITX_TOP_BIST_CNTL, BIT(12));
 
-	/* TMDS pattern setup (TOFIX pattern for 4k2k scrambling) */
-	dw_hdmi_top_write(dw_hdmi, HDMITX_TOP_TMDS_CLK_PTTN_01, 0x001f001f);
-	dw_hdmi_top_write(dw_hdmi, HDMITX_TOP_TMDS_CLK_PTTN_23, 0x001f001f);
+	/* TMDS pattern setup (TOFIX Handle the YUV420 case) */
+	if (mode->clock > 340000) {
+		dw_hdmi_top_write(dw_hdmi, HDMITX_TOP_TMDS_CLK_PTTN_01, 0);
+		dw_hdmi_top_write(dw_hdmi, HDMITX_TOP_TMDS_CLK_PTTN_23,
+				  0x03ff03ff);
+	} else {
+		dw_hdmi_top_write(dw_hdmi, HDMITX_TOP_TMDS_CLK_PTTN_01,
+				  0x001f001f);
+		dw_hdmi_top_write(dw_hdmi, HDMITX_TOP_TMDS_CLK_PTTN_23,
+				  0x001f001f);
+	}
 
 	/* Load TMDS pattern */
 	dw_hdmi_top_write(dw_hdmi, HDMITX_TOP_TMDS_CLK_PTTN_CNTL, 0x1);
@@ -413,6 +422,8 @@  static int dw_hdmi_phy_init(struct dw_hdmi *hdmi, void *data,
 	/* Disable clock, fifo, fifo_wr */
 	regmap_update_bits(priv->hhi, HHI_HDMI_PHY_CNTL1, 0xf, 0);
 
+	dw_hdmi_set_high_tmds_clock_ratio(hdmi);
+
 	msleep(100);
 
 	/* Reset PHY 3 times in a row */
@@ -562,6 +573,10 @@  dw_hdmi_mode_valid(struct drm_connector *connector,
 		mode->vdisplay, mode->vsync_start,
 		mode->vsync_end, mode->vtotal, mode->type, mode->flags);
 
+	/* If sink max TMDS clock, we reject the mode */
+	if (mode->clock > connector->display_info.max_tmds_clock)
+		return MODE_BAD;
+
 	/* Check against non-VIC supported modes */
 	if (!vic) {
 		status = meson_venc_hdmi_supported_mode(mode);