| Message ID | 1546955444-7549-5-git-send-email-jianxin.pan@amlogic.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Delegated to: | Neil Armstrong |
| Headers | show |
| Series | clk: meson: add a sub EMMC clock controller support | expand |
On Tue, 2019-01-08 at 21:50 +0800, Jianxin Pan wrote: > From: Yixun Lan <yixun.lan@amlogic.com> > > The patch will add a MMC clock controller driver which used by MMC or NAND, > It provide a mux and divider clock, and three phase clocks - core, tx, tx. > > Two clocks are provided as the parent of MMC clock controller from > upper layer clock controller - eg "amlogic,axg-clkc" in AXG platform. > > To specify which clock the MMC or NAND driver may consume, > the preprocessor macros in the dt-bindings/clock/amlogic,mmc-clkc.h header > can be used in the device tree sources. > > Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> > Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com> > --- > drivers/clk/meson/Kconfig | 10 ++ > drivers/clk/meson/Makefile | 1 + > drivers/clk/meson/mmc-clkc.c | 304 > +++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 315 insertions(+) > create mode 100644 drivers/clk/meson/mmc-clkc.c > > diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig > index efaa70f..3555f9d 100644 > --- a/drivers/clk/meson/Kconfig > +++ b/drivers/clk/meson/Kconfig > @@ -15,6 +15,16 @@ config COMMON_CLK_MESON_AO > select COMMON_CLK_REGMAP_MESON > select RESET_CONTROLLER > > +config COMMON_CLK_MMC_MESON > + tristate "Meson MMC Sub Clock Controller Driver" > + depends on ARCH_MESON || COMPILE_TEST > + select MFD_SYSCON > + select COMMON_CLK_AMLOGIC > + help > + Support for the MMC sub clock controller on Amlogic Meson Platform, > + which include S905 (GXBB, GXL), A113D/X (AXG) devices. > + Say Y if you want this clock enabled. > + > config COMMON_CLK_REGMAP_MESON > bool > select REGMAP > diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile > index d59620d..54416a2 100644 > --- a/drivers/clk/meson/Makefile > +++ b/drivers/clk/meson/Makefile > @@ -12,4 +12,5 @@ obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o > obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o gxbb-aoclk- > 32k.o > obj-$(CONFIG_COMMON_CLK_AXG) += axg.o axg-aoclk.o > obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o > +obj-$(CONFIG_COMMON_CLK_MMC_MESON) += mmc-clkc.o > obj-$(CONFIG_COMMON_CLK_REGMAP_MESON) += clk-regmap.o > diff --git a/drivers/clk/meson/mmc-clkc.c b/drivers/clk/meson/mmc-clkc.c > new file mode 100644 > index 0000000..2582a98 > --- /dev/null > +++ b/drivers/clk/meson/mmc-clkc.c > @@ -0,0 +1,304 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Amlogic Meson MMC Sub Clock Controller Driver > + * > + * Copyright (c) 2017 Baylibre SAS. > + * Author: Jerome Brunet <jbrunet@baylibre.com> > + * > + * Copyright (c) 2018 Amlogic, inc. > + * Author: Yixun Lan <yixun.lan@amlogic.com> > + * Author: Jianxin Pan <jianxin.pan@amlogic.com> > + */ > + > +#include <linux/clk.h> > +#include <linux/clk-provider.h> > +#include <linux/module.h> > +#include <linux/regmap.h> > +#include <linux/slab.h> > +#include <linux/of_device.h> > +#include <linux/mfd/syscon.h> > +#include <linux/platform_device.h> > +#include <dt-bindings/clock/amlogic,mmc-clkc.h> > + > +#include "clkc.h" > + > +/* clock ID used by internal driver */ > + > +#define SD_EMMC_CLOCK 0 > +#define CLK_DELAY_STEP_PS 200 > +#define MUX_CLK_NUM_PARENTS 2 > +#define MMC_MAX_CLKS 4 > + > +struct mmc_clkc_data { > + struct meson_clk_phase_delay_data tx; > + struct meson_clk_phase_delay_data rx; > +}; > + > +static struct clk_regmap_mux_data mmc_clkc_mux_data = { > + .offset = SD_EMMC_CLOCK, > + .mask = 0x3, > + .shift = 6, > +}; > + > +static const struct meson_sclk_div_data mmc_clkc_div_data = { > + .div = { > + .reg_off = SD_EMMC_CLOCK, > + .width = 6, > + }, > + .flags = CLK_DIVIDER_ONE_BASED, > +}; > + > +static struct meson_clk_phase_data mmc_clkc_core_phase = { > + .ph = { > + .reg_off = SD_EMMC_CLOCK, > + .shift = 8, > + .width = 2, > + } > +}; > + > +static const struct mmc_clkc_data mmc_clkc_gx_data = { > + .tx = { > + .phase = { > + .reg_off = SD_EMMC_CLOCK, > + .shift = 10, > + .width = 2, > + }, > + .delay = { > + .reg_off = SD_EMMC_CLOCK, > + .shift = 16, > + .width = 4, > + }, > + .delay_step_ps = CLK_DELAY_STEP_PS, > + }, > + .rx = { > + .phase = { > + .reg_off = SD_EMMC_CLOCK, > + .shift = 12, > + .width = 2, > + }, > + .delay = { > + .reg_off = SD_EMMC_CLOCK, > + .shift = 20, > + .width = 4, > + }, > + .delay_step_ps = CLK_DELAY_STEP_PS, > + }, > +}; > + > +static const struct mmc_clkc_data mmc_clkc_axg_data = { > + .tx = { > + .phase = { > + .reg_off = SD_EMMC_CLOCK, > + .shift = 10, > + .width = 2, > + }, > + .delay = { > + .reg_off = SD_EMMC_CLOCK, > + .shift = 16, > + .width = 6, > + }, > + .delay_step_ps = CLK_DELAY_STEP_PS, Please check this. The delay step is not 200ns on the AXG. > + }, > + .rx = { > + .phase = { > + .reg_off = SD_EMMC_CLOCK, > + .shift = 12, > + .width = 2, > + }, > + .delay = { > + .reg_off = SD_EMMC_CLOCK, > + .shift = 22, > + .width = 6, > + }, > + .delay_step_ps = CLK_DELAY_STEP_PS, > + }, > +}; > + > +static const struct of_device_id mmc_clkc_match_table[] = { > + { > + .compatible = "amlogic,gx-mmc-clkc", > + .data = &mmc_clkc_gx_data > + }, > + { > + .compatible = "amlogic,axg-mmc-clkc", > + .data = &mmc_clkc_axg_data > + }, > + {} > +}; > +MODULE_DEVICE_TABLE(of, mmc_clkc_match_table); > + > +static struct clk_regmap * > +mmc_clkc_register_clk(struct device *dev, struct regmap *map, > + struct clk_init_data *init, > + const char *suffix, void *data) > +{ > + struct clk_regmap *clk; > + char *name; > + int ret; > + > + clk = devm_kzalloc(dev, sizeof(*clk), GFP_KERNEL); > + if (!clk) > + return ERR_PTR(-ENOMEM); > + > + name = kasprintf(GFP_KERNEL, "%s#%s", dev_name(dev), suffix); > + if (!name) > + return ERR_PTR(-ENOMEM); > + > + init->name = name; > + clk->map = map; > + clk->data = data; > + clk->hw.init = init; > + ret = devm_clk_hw_register(dev, &clk->hw); > + if (ret) > + clk = ERR_PTR(ret); > + > + kfree(name); > + return clk; > +} > + > +static struct clk_regmap *mmc_clkc_register_mux(struct device *dev, > + struct regmap *map) > +{ > + const char *parent_names[MUX_CLK_NUM_PARENTS]; > + struct clk_init_data init; > + struct clk_regmap *mux; > + struct clk *clk; > + int i; > + > + for (i = 0; i < MUX_CLK_NUM_PARENTS; i++) { > + char name[8]; > + > + snprintf(name, sizeof(name), "clkin%d", i); > + clk = devm_clk_get(dev, name); > + if (IS_ERR(clk)) { > + if (clk != ERR_PTR(-EPROBE_DEFER)) > + dev_err(dev, "Missing clock %s\n", name); > + return ERR_CAST(clk); > + } > + > + parent_names[i] = __clk_get_name(clk); > + } > + > + init.ops = &clk_regmap_mux_ops; > + init.flags = CLK_SET_RATE_PARENT; > + init.parent_names = parent_names; > + init.num_parents = MUX_CLK_NUM_PARENTS; > + > + mux = mmc_clkc_register_clk(dev, map, &init, "mux", > &mmc_clkc_mux_data); > + if (IS_ERR(mux)) > + dev_err(dev, "Mux clock registration failed\n"); > + > + return mux; > +} > + > +static struct clk_regmap * > +mmc_clkc_register_clk_with_parent(struct device *dev, struct regmap *map, > + char *suffix, const struct clk_hw *hw, > + unsigned long flags, > + const struct clk_ops *ops, void *data) > +{ > + struct clk_init_data init; > + struct clk_regmap *clk; > + const char *parent_name = clk_hw_get_name(hw); > + > + init.ops = ops; > + init.flags = flags; > + init.parent_names = &parent_name; > + init.num_parents = 1; > + > + clk = mmc_clkc_register_clk(dev, map, &init, suffix, data); > + if (IS_ERR(clk)) > + dev_err(dev, "%s clock registration failed\n", suffix); > + > + return clk; > +} > + > +static int mmc_clkc_probe(struct platform_device *pdev) > +{ > + struct clk_hw_onecell_data *onecell_data; > + struct device *dev = &pdev->dev; > + struct mmc_clkc_data *data; > + struct regmap *map; > + struct clk_regmap *clk, *core; > + struct meson_sclk_div_data *div_data; > + > + /*cast to drop the const in match->data*/ > + data = (struct mmc_clkc_data *)of_device_get_match_data(dev); > + if (!data) > + return -ENODEV; > + > + map = syscon_node_to_regmap(dev->of_node); > + if (IS_ERR(map)) { > + dev_err(dev, "could not find mmc clock controller\n"); > + return PTR_ERR(map); > + } > + > + onecell_data = devm_kzalloc(dev, sizeof(*onecell_data) + > + sizeof(*onecell_data->hws) * MMC_MAX_CLKS, > + GFP_KERNEL); > + if (!onecell_data) > + return -ENOMEM; > + > + clk = mmc_clkc_register_mux(dev, map); > + if (IS_ERR(clk)) > + return PTR_ERR(clk); > + > + div_data = devm_kzalloc(dev, sizeof(*div_data), GFP_KERNEL); > + if (!div_data) > + return -ENOMEM; > + > + memcpy(div_data, &mmc_clkc_div_data, sizeof(*div_data)); > + clk = mmc_clkc_register_clk_with_parent(dev, map, "div", > + &clk->hw, > + CLK_SET_RATE_PARENT, > + &meson_sclk_div_ops, > + div_data); > + if (IS_ERR(clk)) > + return PTR_ERR(clk); > + > + onecell_data->hws[CLKID_MMC_DIV] = &clk->hw, > + > + core = mmc_clkc_register_clk_with_parent(dev, map, "core", > + &clk->hw, > + CLK_SET_RATE_PARENT, > + &meson_clk_phase_ops, > + &mmc_clkc_core_phase); > + if (IS_ERR(core)) > + return PTR_ERR(core); > + > + onecell_data->hws[CLKID_MMC_PHASE_CORE] = &core->hw, > + > + clk = mmc_clkc_register_clk_with_parent(dev, map, "rx", > + &core->hw, 0, > + &meson_clk_phase_delay_ops, > + &data->rx); > + if (IS_ERR(clk)) > + return PTR_ERR(clk); > + > + onecell_data->hws[CLKID_MMC_PHASE_RX] = &clk->hw, > + clk = mmc_clkc_register_clk_with_parent(dev, map, "tx", > + &core->hw, 0, > + &meson_clk_phase_delay_ops, > + &data->tx); > + if (IS_ERR(clk)) > + return PTR_ERR(clk); > + > + onecell_data->hws[CLKID_MMC_PHASE_TX] = &clk->hw, > + onecell_data->num = MMC_MAX_CLKS; > + return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, > + onecell_data); > +} > + > +static struct platform_driver mmc_clkc_driver = { > + .probe = mmc_clkc_probe, > + .driver = { > + .name = "meson-mmc-clkc", > + .of_match_table = of_match_ptr(mmc_clkc_match_table), > + }, > +}; > + > +module_platform_driver(mmc_clkc_driver); > + > +MODULE_DESCRIPTION("Amlogic AXG MMC clock driver"); > +MODULE_AUTHOR("Jianxin Pan <jianxin.pan@amlogic.com>"); > +MODULE_LICENSE("GPL v2");
diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig index efaa70f..3555f9d 100644 --- a/drivers/clk/meson/Kconfig +++ b/drivers/clk/meson/Kconfig @@ -15,6 +15,16 @@ config COMMON_CLK_MESON_AO select COMMON_CLK_REGMAP_MESON select RESET_CONTROLLER +config COMMON_CLK_MMC_MESON + tristate "Meson MMC Sub Clock Controller Driver" + depends on ARCH_MESON || COMPILE_TEST + select MFD_SYSCON + select COMMON_CLK_AMLOGIC + help + Support for the MMC sub clock controller on Amlogic Meson Platform, + which include S905 (GXBB, GXL), A113D/X (AXG) devices. + Say Y if you want this clock enabled. + config COMMON_CLK_REGMAP_MESON bool select REGMAP diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile index d59620d..54416a2 100644 --- a/drivers/clk/meson/Makefile +++ b/drivers/clk/meson/Makefile @@ -12,4 +12,5 @@ obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o gxbb-aoclk-32k.o obj-$(CONFIG_COMMON_CLK_AXG) += axg.o axg-aoclk.o obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o +obj-$(CONFIG_COMMON_CLK_MMC_MESON) += mmc-clkc.o obj-$(CONFIG_COMMON_CLK_REGMAP_MESON) += clk-regmap.o diff --git a/drivers/clk/meson/mmc-clkc.c b/drivers/clk/meson/mmc-clkc.c new file mode 100644 index 0000000..2582a98 --- /dev/null +++ b/drivers/clk/meson/mmc-clkc.c @@ -0,0 +1,304 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Amlogic Meson MMC Sub Clock Controller Driver + * + * Copyright (c) 2017 Baylibre SAS. + * Author: Jerome Brunet <jbrunet@baylibre.com> + * + * Copyright (c) 2018 Amlogic, inc. + * Author: Yixun Lan <yixun.lan@amlogic.com> + * Author: Jianxin Pan <jianxin.pan@amlogic.com> + */ + +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <linux/of_device.h> +#include <linux/mfd/syscon.h> +#include <linux/platform_device.h> +#include <dt-bindings/clock/amlogic,mmc-clkc.h> + +#include "clkc.h" + +/* clock ID used by internal driver */ + +#define SD_EMMC_CLOCK 0 +#define CLK_DELAY_STEP_PS 200 +#define MUX_CLK_NUM_PARENTS 2 +#define MMC_MAX_CLKS 4 + +struct mmc_clkc_data { + struct meson_clk_phase_delay_data tx; + struct meson_clk_phase_delay_data rx; +}; + +static struct clk_regmap_mux_data mmc_clkc_mux_data = { + .offset = SD_EMMC_CLOCK, + .mask = 0x3, + .shift = 6, +}; + +static const struct meson_sclk_div_data mmc_clkc_div_data = { + .div = { + .reg_off = SD_EMMC_CLOCK, + .width = 6, + }, + .flags = CLK_DIVIDER_ONE_BASED, +}; + +static struct meson_clk_phase_data mmc_clkc_core_phase = { + .ph = { + .reg_off = SD_EMMC_CLOCK, + .shift = 8, + .width = 2, + } +}; + +static const struct mmc_clkc_data mmc_clkc_gx_data = { + .tx = { + .phase = { + .reg_off = SD_EMMC_CLOCK, + .shift = 10, + .width = 2, + }, + .delay = { + .reg_off = SD_EMMC_CLOCK, + .shift = 16, + .width = 4, + }, + .delay_step_ps = CLK_DELAY_STEP_PS, + }, + .rx = { + .phase = { + .reg_off = SD_EMMC_CLOCK, + .shift = 12, + .width = 2, + }, + .delay = { + .reg_off = SD_EMMC_CLOCK, + .shift = 20, + .width = 4, + }, + .delay_step_ps = CLK_DELAY_STEP_PS, + }, +}; + +static const struct mmc_clkc_data mmc_clkc_axg_data = { + .tx = { + .phase = { + .reg_off = SD_EMMC_CLOCK, + .shift = 10, + .width = 2, + }, + .delay = { + .reg_off = SD_EMMC_CLOCK, + .shift = 16, + .width = 6, + }, + .delay_step_ps = CLK_DELAY_STEP_PS, + }, + .rx = { + .phase = { + .reg_off = SD_EMMC_CLOCK, + .shift = 12, + .width = 2, + }, + .delay = { + .reg_off = SD_EMMC_CLOCK, + .shift = 22, + .width = 6, + }, + .delay_step_ps = CLK_DELAY_STEP_PS, + }, +}; + +static const struct of_device_id mmc_clkc_match_table[] = { + { + .compatible = "amlogic,gx-mmc-clkc", + .data = &mmc_clkc_gx_data + }, + { + .compatible = "amlogic,axg-mmc-clkc", + .data = &mmc_clkc_axg_data + }, + {} +}; +MODULE_DEVICE_TABLE(of, mmc_clkc_match_table); + +static struct clk_regmap * +mmc_clkc_register_clk(struct device *dev, struct regmap *map, + struct clk_init_data *init, + const char *suffix, void *data) +{ + struct clk_regmap *clk; + char *name; + int ret; + + clk = devm_kzalloc(dev, sizeof(*clk), GFP_KERNEL); + if (!clk) + return ERR_PTR(-ENOMEM); + + name = kasprintf(GFP_KERNEL, "%s#%s", dev_name(dev), suffix); + if (!name) + return ERR_PTR(-ENOMEM); + + init->name = name; + clk->map = map; + clk->data = data; + clk->hw.init = init; + ret = devm_clk_hw_register(dev, &clk->hw); + if (ret) + clk = ERR_PTR(ret); + + kfree(name); + return clk; +} + +static struct clk_regmap *mmc_clkc_register_mux(struct device *dev, + struct regmap *map) +{ + const char *parent_names[MUX_CLK_NUM_PARENTS]; + struct clk_init_data init; + struct clk_regmap *mux; + struct clk *clk; + int i; + + for (i = 0; i < MUX_CLK_NUM_PARENTS; i++) { + char name[8]; + + snprintf(name, sizeof(name), "clkin%d", i); + clk = devm_clk_get(dev, name); + if (IS_ERR(clk)) { + if (clk != ERR_PTR(-EPROBE_DEFER)) + dev_err(dev, "Missing clock %s\n", name); + return ERR_CAST(clk); + } + + parent_names[i] = __clk_get_name(clk); + } + + init.ops = &clk_regmap_mux_ops; + init.flags = CLK_SET_RATE_PARENT; + init.parent_names = parent_names; + init.num_parents = MUX_CLK_NUM_PARENTS; + + mux = mmc_clkc_register_clk(dev, map, &init, "mux", &mmc_clkc_mux_data); + if (IS_ERR(mux)) + dev_err(dev, "Mux clock registration failed\n"); + + return mux; +} + +static struct clk_regmap * +mmc_clkc_register_clk_with_parent(struct device *dev, struct regmap *map, + char *suffix, const struct clk_hw *hw, + unsigned long flags, + const struct clk_ops *ops, void *data) +{ + struct clk_init_data init; + struct clk_regmap *clk; + const char *parent_name = clk_hw_get_name(hw); + + init.ops = ops; + init.flags = flags; + init.parent_names = &parent_name; + init.num_parents = 1; + + clk = mmc_clkc_register_clk(dev, map, &init, suffix, data); + if (IS_ERR(clk)) + dev_err(dev, "%s clock registration failed\n", suffix); + + return clk; +} + +static int mmc_clkc_probe(struct platform_device *pdev) +{ + struct clk_hw_onecell_data *onecell_data; + struct device *dev = &pdev->dev; + struct mmc_clkc_data *data; + struct regmap *map; + struct clk_regmap *clk, *core; + struct meson_sclk_div_data *div_data; + + /*cast to drop the const in match->data*/ + data = (struct mmc_clkc_data *)of_device_get_match_data(dev); + if (!data) + return -ENODEV; + + map = syscon_node_to_regmap(dev->of_node); + if (IS_ERR(map)) { + dev_err(dev, "could not find mmc clock controller\n"); + return PTR_ERR(map); + } + + onecell_data = devm_kzalloc(dev, sizeof(*onecell_data) + + sizeof(*onecell_data->hws) * MMC_MAX_CLKS, + GFP_KERNEL); + if (!onecell_data) + return -ENOMEM; + + clk = mmc_clkc_register_mux(dev, map); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + div_data = devm_kzalloc(dev, sizeof(*div_data), GFP_KERNEL); + if (!div_data) + return -ENOMEM; + + memcpy(div_data, &mmc_clkc_div_data, sizeof(*div_data)); + clk = mmc_clkc_register_clk_with_parent(dev, map, "div", + &clk->hw, + CLK_SET_RATE_PARENT, + &meson_sclk_div_ops, + div_data); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + onecell_data->hws[CLKID_MMC_DIV] = &clk->hw, + + core = mmc_clkc_register_clk_with_parent(dev, map, "core", + &clk->hw, + CLK_SET_RATE_PARENT, + &meson_clk_phase_ops, + &mmc_clkc_core_phase); + if (IS_ERR(core)) + return PTR_ERR(core); + + onecell_data->hws[CLKID_MMC_PHASE_CORE] = &core->hw, + + clk = mmc_clkc_register_clk_with_parent(dev, map, "rx", + &core->hw, 0, + &meson_clk_phase_delay_ops, + &data->rx); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + onecell_data->hws[CLKID_MMC_PHASE_RX] = &clk->hw, + clk = mmc_clkc_register_clk_with_parent(dev, map, "tx", + &core->hw, 0, + &meson_clk_phase_delay_ops, + &data->tx); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + onecell_data->hws[CLKID_MMC_PHASE_TX] = &clk->hw, + onecell_data->num = MMC_MAX_CLKS; + return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, + onecell_data); +} + +static struct platform_driver mmc_clkc_driver = { + .probe = mmc_clkc_probe, + .driver = { + .name = "meson-mmc-clkc", + .of_match_table = of_match_ptr(mmc_clkc_match_table), + }, +}; + +module_platform_driver(mmc_clkc_driver); + +MODULE_DESCRIPTION("Amlogic AXG MMC clock driver"); +MODULE_AUTHOR("Jianxin Pan <jianxin.pan@amlogic.com>"); +MODULE_LICENSE("GPL v2");