| Message ID | 1548309279-5281-5-git-send-email-sumit.garg@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Introduce TEE bus driver framework | expand |
On Thu, Jan 24, 2019 at 11:24:39AM +0530, Sumit Garg wrote: > On ARM SoC's with TrustZone enabled, peripherals like entropy sources > might not be accessible to normal world (linux in this case) and rather > accessible to secure world (OP-TEE in this case) only. So this driver > aims to provides a generic interface to OP-TEE based random number > generator service. > > This driver registers on TEE bus to interact with OP-TEE based rng > device/service. > > Signed-off-by: Sumit Garg <sumit.garg@linaro.org> > --- > MAINTAINERS | 5 + > drivers/char/hw_random/Kconfig | 15 ++ > drivers/char/hw_random/Makefile | 1 + > drivers/char/hw_random/optee-rng.c | 274 +++++++++++++++++++++++++++++++++++++ > 4 files changed, 295 insertions(+) > create mode 100644 drivers/char/hw_random/optee-rng.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index 51029a4..dcef7e9 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -11262,6 +11262,11 @@ M: Jens Wiklander <jens.wiklander@linaro.org> > S: Maintained > F: drivers/tee/optee/ > > +OP-TEE RANDOM NUMBER GENERATOR (RNG) DRIVER > +M: Sumit Garg <sumit.garg@linaro.org> > +S: Maintained > +F: drivers/char/hw_random/optee-rng.c > + > OPA-VNIC DRIVER > M: Dennis Dalessandro <dennis.dalessandro@intel.com> > M: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> > diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig > index dac895d..25a7d8f 100644 > --- a/drivers/char/hw_random/Kconfig > +++ b/drivers/char/hw_random/Kconfig > @@ -424,6 +424,21 @@ config HW_RANDOM_EXYNOS > will be called exynos-trng. > > If unsure, say Y. > + > +config HW_RANDOM_OPTEE > + tristate "OP-TEE based Random Number Generator support" > + depends on OPTEE > + default HW_RANDOM > + help > + This driver provides support for OP-TEE based Random Number > + Generator on ARM SoCs where hardware entropy sources are not > + accessible to normal world (Linux). > + > + To compile this driver as a module, choose M here: the module > + will be called optee-rng. > + > + If unsure, say Y. > + > endif # HW_RANDOM > > config UML_RANDOM > diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile > index e35ec3c..7c9ef4a 100644 > --- a/drivers/char/hw_random/Makefile > +++ b/drivers/char/hw_random/Makefile > @@ -38,3 +38,4 @@ obj-$(CONFIG_HW_RANDOM_CAVIUM) += cavium-rng.o cavium-rng-vf.o > obj-$(CONFIG_HW_RANDOM_MTK) += mtk-rng.o > obj-$(CONFIG_HW_RANDOM_S390) += s390-trng.o > obj-$(CONFIG_HW_RANDOM_KEYSTONE) += ks-sa-rng.o > +obj-$(CONFIG_HW_RANDOM_OPTEE) += optee-rng.o > diff --git a/drivers/char/hw_random/optee-rng.c b/drivers/char/hw_random/optee-rng.c > new file mode 100644 > index 0000000..4ad0eca > --- /dev/null > +++ b/drivers/char/hw_random/optee-rng.c > @@ -0,0 +1,274 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (C) 2018-2019 Linaro Ltd. > + */ > + > +#include <linux/delay.h> > +#include <linux/of.h> > +#include <linux/hw_random.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/slab.h> > +#include <linux/tee_drv.h> > +#include <linux/uuid.h> > + > +#define DRIVER_NAME "optee-rng" > + > +#define TEE_ERROR_HEALTH_TEST_FAIL 0x00000001 > + > +/* > + * TA_CMD_GET_ENTROPY - Get Entropy from RNG > + * > + * param[0] (inout memref) - Entropy buffer memory reference > + * param[1] unused > + * param[2] unused > + * param[3] unused > + * > + * Result: > + * TEE_SUCCESS - Invoke command success > + * TEE_ERROR_BAD_PARAMETERS - Incorrect input param > + * TEE_ERROR_NOT_SUPPORTED - Requested entropy size greater than size of pool > + * TEE_ERROR_HEALTH_TEST_FAIL - Continuous health testing failed > + */ > +#define TA_CMD_GET_ENTROPY 0x0 > + > +/* > + * TA_CMD_GET_RNG_INFO - Get RNG information > + * > + * param[0] (out value) - value.a: RNG data-rate in bytes per second > + * value.b: Quality/Entropy per 1024 bit of data > + * param[1] unused > + * param[2] unused > + * param[3] unused > + * > + * Result: > + * TEE_SUCCESS - Invoke command success > + * TEE_ERROR_BAD_PARAMETERS - Incorrect input param > + */ > +#define TA_CMD_GET_RNG_INFO 0x1 > + > +#define MAX_ENTROPY_REQ_SZ (4 * 1024) > + > +static struct tee_context *ctx; > +static struct tee_shm *entropy_shm_pool; > +static u32 ta_rng_data_rate; > +static u32 ta_rng_session_id; > + > +static size_t get_optee_rng_data(void *buf, size_t req_size) > +{ > + u32 ret = 0; > + u8 *rng_data = NULL; > + size_t rng_size = 0; > + struct tee_ioctl_invoke_arg inv_arg = {0}; > + struct tee_param param[4] = {0}; > + > + /* Invoke TA_CMD_GET_ENTROPY function of Trusted App */ > + inv_arg.func = TA_CMD_GET_ENTROPY; > + inv_arg.session = ta_rng_session_id; > + inv_arg.num_params = 4; > + > + /* Fill invoke cmd params */ > + param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INOUT; > + param[0].u.memref.shm = entropy_shm_pool; > + param[0].u.memref.size = req_size; > + param[0].u.memref.shm_offs = 0; > + > + ret = tee_client_invoke_func(ctx, &inv_arg, param); > + if ((ret < 0) || (inv_arg.ret != 0)) { > + pr_err("TA_CMD_GET_ENTROPY invoke function error: %x\n", > + inv_arg.ret); Why can't these be dev_err()? > + return 0; > + } > + > + rng_data = tee_shm_get_va(entropy_shm_pool, 0); > + if (IS_ERR(rng_data)) { > + pr_err("tee_shm_get_va failed\n"); > + return 0; > + } > + > + rng_size = param[0].u.memref.size; > + memcpy(buf, rng_data, rng_size); > + > + return rng_size; > +} > + > +static int optee_rng_read(struct hwrng *rng, void *buf, size_t max, bool wait) > +{ > + u8 *data = buf; > + size_t read = 0, rng_size = 0; > + int timeout = 1; > + > + if (max > MAX_ENTROPY_REQ_SZ) > + max = MAX_ENTROPY_REQ_SZ; > + > + while (read == 0) { > + rng_size = get_optee_rng_data(data, (max - read)); > + > + data += rng_size; > + read += rng_size; > + > + if (wait) { > + if (timeout-- == 0) > + return read; > + msleep((1000 * (max - read)) / ta_rng_data_rate); > + } else { > + return read; > + } > + } > + > + return read; > +} > + > +static int optee_rng_init(struct hwrng *rng) > +{ > + entropy_shm_pool = tee_shm_alloc(ctx, MAX_ENTROPY_REQ_SZ, > + TEE_SHM_MAPPED | TEE_SHM_DMA_BUF); > + if (IS_ERR(entropy_shm_pool)) { > + pr_err("tee_shm_alloc failed\n"); This one is slightly annoying. It could be a dev_err() but needs quite a bit of machinary hooked up (optee_rng_private) to allow you to look up the device from the hwrng. It would allow you to move all those statics (like entropy_shm_pool) into a proper context structure though... Daniel. > + return PTR_ERR(entropy_shm_pool); > + } > + > + return 0; > +} > + > +static void optee_rng_cleanup(struct hwrng *rng) > +{ > + tee_shm_free(entropy_shm_pool); > +} > + > +static struct hwrng optee_rng = { > + .name = DRIVER_NAME, > + .init = optee_rng_init, > + .cleanup = optee_rng_cleanup, > + .read = optee_rng_read, > +}; > + > +static int get_optee_rng_info(struct device *dev) > +{ > + u32 ret = 0; > + struct tee_ioctl_invoke_arg inv_arg = {0}; > + struct tee_param param[4] = {0}; > + > + /* Invoke TA_CMD_GET_RNG_INFO function of Trusted App */ > + inv_arg.func = TA_CMD_GET_RNG_INFO; > + inv_arg.session = ta_rng_session_id; > + inv_arg.num_params = 4; > + > + /* Fill invoke cmd params */ > + param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT; > + > + ret = tee_client_invoke_func(ctx, &inv_arg, param); > + if ((ret < 0) || (inv_arg.ret != 0)) { > + dev_err(dev, "TA_CMD_GET_RNG_INFO invoke func error: %x\n", > + inv_arg.ret); > + return -EINVAL; > + } > + > + ta_rng_data_rate = param[0].u.value.a; > + optee_rng.quality = param[0].u.value.b; > + > + return 0; > +} > + > +static int optee_ctx_match(struct tee_ioctl_version_data *ver, const void *data) > +{ > + if (ver->impl_id == TEE_IMPL_ID_OPTEE) > + return 1; > + else > + return 0; > +} > + > +static int optee_rng_probe(struct device *dev) > +{ > + struct tee_client_device *rng_device = to_tee_client_device(dev); > + int ret = 0, err = -ENODEV; > + struct tee_ioctl_open_session_arg sess_arg = {0}; > + > + /* Open context with TEE driver */ > + ctx = tee_client_open_context(NULL, optee_ctx_match, NULL, NULL); > + if (IS_ERR(ctx)) > + return -ENODEV; > + > + /* Open session with hwrng Trusted App */ > + memcpy(sess_arg.uuid, rng_device->id.uuid.b, TEE_IOCTL_UUID_LEN); > + sess_arg.clnt_login = TEE_IOCTL_LOGIN_PUBLIC; > + sess_arg.num_params = 0; > + > + ret = tee_client_open_session(ctx, &sess_arg, NULL); > + if ((ret < 0) || (sess_arg.ret != 0)) { > + dev_err(dev, "tee_client_open_session failed, error: %x\n", > + sess_arg.ret); > + err = -EINVAL; > + goto out_ctx; > + } > + ta_rng_session_id = sess_arg.session; > + > + err = get_optee_rng_info(dev); > + if (err) > + goto out_sess; > + > + err = hwrng_register(&optee_rng); > + if (err) { > + dev_err(dev, "hwrng registration failed (%d)\n", err); > + goto out_sess; > + } > + > + return 0; > + > +out_sess: > + tee_client_close_session(ctx, ta_rng_session_id); > +out_ctx: > + tee_client_close_context(ctx); > + > + return err; > +} > + > +static int optee_rng_remove(struct device *dev) > +{ > + hwrng_unregister(&optee_rng); > + tee_client_close_session(ctx, ta_rng_session_id); > + tee_client_close_context(ctx); > + > + return 0; > +} > + > +const struct tee_client_device_id optee_rng_id_table[] = { > + {UUID_INIT(0xab7a617c, 0xb8e7, 0x4d8f, > + 0x83, 0x01, 0xd0, 0x9b, 0x61, 0x03, 0x6b, 0x64)}, > + {} > +}; > + > +MODULE_DEVICE_TABLE(tee, optee_rng_id_table); > + > +static struct tee_client_driver optee_rng_driver = { > + .id_table = optee_rng_id_table, > + .driver = { > + .name = DRIVER_NAME, > + .bus = &tee_bus_type, > + .probe = optee_rng_probe, > + .remove = optee_rng_remove, > + }, > +}; > + > +static int __init optee_rng_mod_init(void) > +{ > + int rc; > + > + rc = driver_register(&optee_rng_driver.driver); > + if (rc) > + pr_warn("driver registration failed, err: %d", rc); > + > + return rc; > +} > + > +static void __exit optee_rng_mod_exit(void) > +{ > + driver_unregister(&optee_rng_driver.driver); > +} > + > +module_init(optee_rng_mod_init); > +module_exit(optee_rng_mod_exit); > + > +MODULE_LICENSE("GPL v2"); > +MODULE_AUTHOR("Sumit Garg <sumit.garg@linaro.org>"); > -- > 2.7.4 >
On Thu, 24 Jan 2019 at 18:01, Daniel Thompson <daniel.thompson@linaro.org> wrote: > > On Thu, Jan 24, 2019 at 11:24:39AM +0530, Sumit Garg wrote: > > On ARM SoC's with TrustZone enabled, peripherals like entropy sources > > might not be accessible to normal world (linux in this case) and rather > > accessible to secure world (OP-TEE in this case) only. So this driver > > aims to provides a generic interface to OP-TEE based random number > > generator service. > > > > This driver registers on TEE bus to interact with OP-TEE based rng > > device/service. > > > > Signed-off-by: Sumit Garg <sumit.garg@linaro.org> > > --- > > MAINTAINERS | 5 + > > drivers/char/hw_random/Kconfig | 15 ++ > > drivers/char/hw_random/Makefile | 1 + > > drivers/char/hw_random/optee-rng.c | 274 +++++++++++++++++++++++++++++++++++++ > > 4 files changed, 295 insertions(+) > > create mode 100644 drivers/char/hw_random/optee-rng.c > > > > diff --git a/MAINTAINERS b/MAINTAINERS > > index 51029a4..dcef7e9 100644 > > --- a/MAINTAINERS > > +++ b/MAINTAINERS > > @@ -11262,6 +11262,11 @@ M: Jens Wiklander <jens.wiklander@linaro.org> > > S: Maintained > > F: drivers/tee/optee/ > > > > +OP-TEE RANDOM NUMBER GENERATOR (RNG) DRIVER > > +M: Sumit Garg <sumit.garg@linaro.org> > > +S: Maintained > > +F: drivers/char/hw_random/optee-rng.c > > + > > OPA-VNIC DRIVER > > M: Dennis Dalessandro <dennis.dalessandro@intel.com> > > M: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> > > diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig > > index dac895d..25a7d8f 100644 > > --- a/drivers/char/hw_random/Kconfig > > +++ b/drivers/char/hw_random/Kconfig > > @@ -424,6 +424,21 @@ config HW_RANDOM_EXYNOS > > will be called exynos-trng. > > > > If unsure, say Y. > > + > > +config HW_RANDOM_OPTEE > > + tristate "OP-TEE based Random Number Generator support" > > + depends on OPTEE > > + default HW_RANDOM > > + help > > + This driver provides support for OP-TEE based Random Number > > + Generator on ARM SoCs where hardware entropy sources are not > > + accessible to normal world (Linux). > > + > > + To compile this driver as a module, choose M here: the module > > + will be called optee-rng. > > + > > + If unsure, say Y. > > + > > endif # HW_RANDOM > > > > config UML_RANDOM > > diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile > > index e35ec3c..7c9ef4a 100644 > > --- a/drivers/char/hw_random/Makefile > > +++ b/drivers/char/hw_random/Makefile > > @@ -38,3 +38,4 @@ obj-$(CONFIG_HW_RANDOM_CAVIUM) += cavium-rng.o cavium-rng-vf.o > > obj-$(CONFIG_HW_RANDOM_MTK) += mtk-rng.o > > obj-$(CONFIG_HW_RANDOM_S390) += s390-trng.o > > obj-$(CONFIG_HW_RANDOM_KEYSTONE) += ks-sa-rng.o > > +obj-$(CONFIG_HW_RANDOM_OPTEE) += optee-rng.o > > diff --git a/drivers/char/hw_random/optee-rng.c b/drivers/char/hw_random/optee-rng.c > > new file mode 100644 > > index 0000000..4ad0eca > > --- /dev/null > > +++ b/drivers/char/hw_random/optee-rng.c > > @@ -0,0 +1,274 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +/* > > + * Copyright (C) 2018-2019 Linaro Ltd. > > + */ > > + > > +#include <linux/delay.h> > > +#include <linux/of.h> > > +#include <linux/hw_random.h> > > +#include <linux/kernel.h> > > +#include <linux/module.h> > > +#include <linux/slab.h> > > +#include <linux/tee_drv.h> > > +#include <linux/uuid.h> > > + > > +#define DRIVER_NAME "optee-rng" > > + > > +#define TEE_ERROR_HEALTH_TEST_FAIL 0x00000001 > > + > > +/* > > + * TA_CMD_GET_ENTROPY - Get Entropy from RNG > > + * > > + * param[0] (inout memref) - Entropy buffer memory reference > > + * param[1] unused > > + * param[2] unused > > + * param[3] unused > > + * > > + * Result: > > + * TEE_SUCCESS - Invoke command success > > + * TEE_ERROR_BAD_PARAMETERS - Incorrect input param > > + * TEE_ERROR_NOT_SUPPORTED - Requested entropy size greater than size of pool > > + * TEE_ERROR_HEALTH_TEST_FAIL - Continuous health testing failed > > + */ > > +#define TA_CMD_GET_ENTROPY 0x0 > > + > > +/* > > + * TA_CMD_GET_RNG_INFO - Get RNG information > > + * > > + * param[0] (out value) - value.a: RNG data-rate in bytes per second > > + * value.b: Quality/Entropy per 1024 bit of data > > + * param[1] unused > > + * param[2] unused > > + * param[3] unused > > + * > > + * Result: > > + * TEE_SUCCESS - Invoke command success > > + * TEE_ERROR_BAD_PARAMETERS - Incorrect input param > > + */ > > +#define TA_CMD_GET_RNG_INFO 0x1 > > + > > +#define MAX_ENTROPY_REQ_SZ (4 * 1024) > > + > > +static struct tee_context *ctx; > > +static struct tee_shm *entropy_shm_pool; > > +static u32 ta_rng_data_rate; > > +static u32 ta_rng_session_id; > > + > > +static size_t get_optee_rng_data(void *buf, size_t req_size) > > +{ > > + u32 ret = 0; > > + u8 *rng_data = NULL; > > + size_t rng_size = 0; > > + struct tee_ioctl_invoke_arg inv_arg = {0}; > > + struct tee_param param[4] = {0}; > > + > > + /* Invoke TA_CMD_GET_ENTROPY function of Trusted App */ > > + inv_arg.func = TA_CMD_GET_ENTROPY; > > + inv_arg.session = ta_rng_session_id; > > + inv_arg.num_params = 4; > > + > > + /* Fill invoke cmd params */ > > + param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INOUT; > > + param[0].u.memref.shm = entropy_shm_pool; > > + param[0].u.memref.size = req_size; > > + param[0].u.memref.shm_offs = 0; > > + > > + ret = tee_client_invoke_func(ctx, &inv_arg, param); > > + if ((ret < 0) || (inv_arg.ret != 0)) { > > + pr_err("TA_CMD_GET_ENTROPY invoke function error: %x\n", > > + inv_arg.ret); > > Why can't these be dev_err()? > See my response below. > > > + return 0; > > + } > > + > > + rng_data = tee_shm_get_va(entropy_shm_pool, 0); > > + if (IS_ERR(rng_data)) { > > + pr_err("tee_shm_get_va failed\n"); > > + return 0; > > + } > > + > > + rng_size = param[0].u.memref.size; > > + memcpy(buf, rng_data, rng_size); > > + > > + return rng_size; > > +} > > + > > +static int optee_rng_read(struct hwrng *rng, void *buf, size_t max, bool wait) > > +{ > > + u8 *data = buf; > > + size_t read = 0, rng_size = 0; > > + int timeout = 1; > > + > > + if (max > MAX_ENTROPY_REQ_SZ) > > + max = MAX_ENTROPY_REQ_SZ; > > + > > + while (read == 0) { > > + rng_size = get_optee_rng_data(data, (max - read)); > > + > > + data += rng_size; > > + read += rng_size; > > + > > + if (wait) { > > + if (timeout-- == 0) > > + return read; > > + msleep((1000 * (max - read)) / ta_rng_data_rate); > > + } else { > > + return read; > > + } > > + } > > + > > + return read; > > +} > > + > > +static int optee_rng_init(struct hwrng *rng) > > +{ > > + entropy_shm_pool = tee_shm_alloc(ctx, MAX_ENTROPY_REQ_SZ, > > + TEE_SHM_MAPPED | TEE_SHM_DMA_BUF); > > + if (IS_ERR(entropy_shm_pool)) { > > + pr_err("tee_shm_alloc failed\n"); > > This one is slightly annoying. It could be a dev_err() but needs quite > a bit of machinary hooked up (optee_rng_private) to allow you to look up > the device from the hwrng. > > It would allow you to move all those statics (like entropy_shm_pool) > into a proper context structure though... > Ok, will create "static struct optee_rng_private" to bundle all the statics along with device pointer and hwrng struct. And use dev_err() instead. -Sumit > > Daniel. > > > > > + return PTR_ERR(entropy_shm_pool); > > + } > > + > > + return 0; > > +} > > + > > +static void optee_rng_cleanup(struct hwrng *rng) > > +{ > > + tee_shm_free(entropy_shm_pool); > > +} > > + > > +static struct hwrng optee_rng = { > > + .name = DRIVER_NAME, > > + .init = optee_rng_init, > > + .cleanup = optee_rng_cleanup, > > + .read = optee_rng_read, > > +}; > > + > > +static int get_optee_rng_info(struct device *dev) > > +{ > > + u32 ret = 0; > > + struct tee_ioctl_invoke_arg inv_arg = {0}; > > + struct tee_param param[4] = {0}; > > + > > + /* Invoke TA_CMD_GET_RNG_INFO function of Trusted App */ > > + inv_arg.func = TA_CMD_GET_RNG_INFO; > > + inv_arg.session = ta_rng_session_id; > > + inv_arg.num_params = 4; > > + > > + /* Fill invoke cmd params */ > > + param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT; > > + > > + ret = tee_client_invoke_func(ctx, &inv_arg, param); > > + if ((ret < 0) || (inv_arg.ret != 0)) { > > + dev_err(dev, "TA_CMD_GET_RNG_INFO invoke func error: %x\n", > > + inv_arg.ret); > > + return -EINVAL; > > + } > > + > > + ta_rng_data_rate = param[0].u.value.a; > > + optee_rng.quality = param[0].u.value.b; > > + > > + return 0; > > +} > > + > > +static int optee_ctx_match(struct tee_ioctl_version_data *ver, const void *data) > > +{ > > + if (ver->impl_id == TEE_IMPL_ID_OPTEE) > > + return 1; > > + else > > + return 0; > > +} > > + > > +static int optee_rng_probe(struct device *dev) > > +{ > > + struct tee_client_device *rng_device = to_tee_client_device(dev); > > + int ret = 0, err = -ENODEV; > > + struct tee_ioctl_open_session_arg sess_arg = {0}; > > + > > + /* Open context with TEE driver */ > > + ctx = tee_client_open_context(NULL, optee_ctx_match, NULL, NULL); > > + if (IS_ERR(ctx)) > > + return -ENODEV; > > + > > + /* Open session with hwrng Trusted App */ > > + memcpy(sess_arg.uuid, rng_device->id.uuid.b, TEE_IOCTL_UUID_LEN); > > + sess_arg.clnt_login = TEE_IOCTL_LOGIN_PUBLIC; > > + sess_arg.num_params = 0; > > + > > + ret = tee_client_open_session(ctx, &sess_arg, NULL); > > + if ((ret < 0) || (sess_arg.ret != 0)) { > > + dev_err(dev, "tee_client_open_session failed, error: %x\n", > > + sess_arg.ret); > > + err = -EINVAL; > > + goto out_ctx; > > + } > > + ta_rng_session_id = sess_arg.session; > > + > > + err = get_optee_rng_info(dev); > > + if (err) > > + goto out_sess; > > + > > + err = hwrng_register(&optee_rng); > > + if (err) { > > + dev_err(dev, "hwrng registration failed (%d)\n", err); > > + goto out_sess; > > + } > > + > > + return 0; > > + > > +out_sess: > > + tee_client_close_session(ctx, ta_rng_session_id); > > +out_ctx: > > + tee_client_close_context(ctx); > > + > > + return err; > > +} > > + > > +static int optee_rng_remove(struct device *dev) > > +{ > > + hwrng_unregister(&optee_rng); > > + tee_client_close_session(ctx, ta_rng_session_id); > > + tee_client_close_context(ctx); > > + > > + return 0; > > +} > > + > > +const struct tee_client_device_id optee_rng_id_table[] = { > > + {UUID_INIT(0xab7a617c, 0xb8e7, 0x4d8f, > > + 0x83, 0x01, 0xd0, 0x9b, 0x61, 0x03, 0x6b, 0x64)}, > > + {} > > +}; > > + > > +MODULE_DEVICE_TABLE(tee, optee_rng_id_table); > > + > > +static struct tee_client_driver optee_rng_driver = { > > + .id_table = optee_rng_id_table, > > + .driver = { > > + .name = DRIVER_NAME, > > + .bus = &tee_bus_type, > > + .probe = optee_rng_probe, > > + .remove = optee_rng_remove, > > + }, > > +}; > > + > > +static int __init optee_rng_mod_init(void) > > +{ > > + int rc; > > + > > + rc = driver_register(&optee_rng_driver.driver); > > + if (rc) > > + pr_warn("driver registration failed, err: %d", rc); > > + > > + return rc; > > +} > > + > > +static void __exit optee_rng_mod_exit(void) > > +{ > > + driver_unregister(&optee_rng_driver.driver); > > +} > > + > > +module_init(optee_rng_mod_init); > > +module_exit(optee_rng_mod_exit); > > + > > +MODULE_LICENSE("GPL v2"); > > +MODULE_AUTHOR("Sumit Garg <sumit.garg@linaro.org>"); > > -- > > 2.7.4 > >
Hi Herbert, On Thu, 24 Jan 2019 at 11:25, Sumit Garg <sumit.garg@linaro.org> wrote: > > On ARM SoC's with TrustZone enabled, peripherals like entropy sources > might not be accessible to normal world (linux in this case) and rather > accessible to secure world (OP-TEE in this case) only. So this driver > aims to provides a generic interface to OP-TEE based random number > generator service. > > This driver registers on TEE bus to interact with OP-TEE based rng > device/service. > > Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Do you have any comments/feedback on this patch before I send next version (v6)? -Sumit > --- > MAINTAINERS | 5 + > drivers/char/hw_random/Kconfig | 15 ++ > drivers/char/hw_random/Makefile | 1 + > drivers/char/hw_random/optee-rng.c | 274 +++++++++++++++++++++++++++++++++++++ > 4 files changed, 295 insertions(+) > create mode 100644 drivers/char/hw_random/optee-rng.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index 51029a4..dcef7e9 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -11262,6 +11262,11 @@ M: Jens Wiklander <jens.wiklander@linaro.org> > S: Maintained > F: drivers/tee/optee/ > > +OP-TEE RANDOM NUMBER GENERATOR (RNG) DRIVER > +M: Sumit Garg <sumit.garg@linaro.org> > +S: Maintained > +F: drivers/char/hw_random/optee-rng.c > + > OPA-VNIC DRIVER > M: Dennis Dalessandro <dennis.dalessandro@intel.com> > M: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> > diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig > index dac895d..25a7d8f 100644 > --- a/drivers/char/hw_random/Kconfig > +++ b/drivers/char/hw_random/Kconfig > @@ -424,6 +424,21 @@ config HW_RANDOM_EXYNOS > will be called exynos-trng. > > If unsure, say Y. > + > +config HW_RANDOM_OPTEE > + tristate "OP-TEE based Random Number Generator support" > + depends on OPTEE > + default HW_RANDOM > + help > + This driver provides support for OP-TEE based Random Number > + Generator on ARM SoCs where hardware entropy sources are not > + accessible to normal world (Linux). > + > + To compile this driver as a module, choose M here: the module > + will be called optee-rng. > + > + If unsure, say Y. > + > endif # HW_RANDOM > > config UML_RANDOM > diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile > index e35ec3c..7c9ef4a 100644 > --- a/drivers/char/hw_random/Makefile > +++ b/drivers/char/hw_random/Makefile > @@ -38,3 +38,4 @@ obj-$(CONFIG_HW_RANDOM_CAVIUM) += cavium-rng.o cavium-rng-vf.o > obj-$(CONFIG_HW_RANDOM_MTK) += mtk-rng.o > obj-$(CONFIG_HW_RANDOM_S390) += s390-trng.o > obj-$(CONFIG_HW_RANDOM_KEYSTONE) += ks-sa-rng.o > +obj-$(CONFIG_HW_RANDOM_OPTEE) += optee-rng.o > diff --git a/drivers/char/hw_random/optee-rng.c b/drivers/char/hw_random/optee-rng.c > new file mode 100644 > index 0000000..4ad0eca > --- /dev/null > +++ b/drivers/char/hw_random/optee-rng.c > @@ -0,0 +1,274 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (C) 2018-2019 Linaro Ltd. > + */ > + > +#include <linux/delay.h> > +#include <linux/of.h> > +#include <linux/hw_random.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/slab.h> > +#include <linux/tee_drv.h> > +#include <linux/uuid.h> > + > +#define DRIVER_NAME "optee-rng" > + > +#define TEE_ERROR_HEALTH_TEST_FAIL 0x00000001 > + > +/* > + * TA_CMD_GET_ENTROPY - Get Entropy from RNG > + * > + * param[0] (inout memref) - Entropy buffer memory reference > + * param[1] unused > + * param[2] unused > + * param[3] unused > + * > + * Result: > + * TEE_SUCCESS - Invoke command success > + * TEE_ERROR_BAD_PARAMETERS - Incorrect input param > + * TEE_ERROR_NOT_SUPPORTED - Requested entropy size greater than size of pool > + * TEE_ERROR_HEALTH_TEST_FAIL - Continuous health testing failed > + */ > +#define TA_CMD_GET_ENTROPY 0x0 > + > +/* > + * TA_CMD_GET_RNG_INFO - Get RNG information > + * > + * param[0] (out value) - value.a: RNG data-rate in bytes per second > + * value.b: Quality/Entropy per 1024 bit of data > + * param[1] unused > + * param[2] unused > + * param[3] unused > + * > + * Result: > + * TEE_SUCCESS - Invoke command success > + * TEE_ERROR_BAD_PARAMETERS - Incorrect input param > + */ > +#define TA_CMD_GET_RNG_INFO 0x1 > + > +#define MAX_ENTROPY_REQ_SZ (4 * 1024) > + > +static struct tee_context *ctx; > +static struct tee_shm *entropy_shm_pool; > +static u32 ta_rng_data_rate; > +static u32 ta_rng_session_id; > + > +static size_t get_optee_rng_data(void *buf, size_t req_size) > +{ > + u32 ret = 0; > + u8 *rng_data = NULL; > + size_t rng_size = 0; > + struct tee_ioctl_invoke_arg inv_arg = {0}; > + struct tee_param param[4] = {0}; > + > + /* Invoke TA_CMD_GET_ENTROPY function of Trusted App */ > + inv_arg.func = TA_CMD_GET_ENTROPY; > + inv_arg.session = ta_rng_session_id; > + inv_arg.num_params = 4; > + > + /* Fill invoke cmd params */ > + param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INOUT; > + param[0].u.memref.shm = entropy_shm_pool; > + param[0].u.memref.size = req_size; > + param[0].u.memref.shm_offs = 0; > + > + ret = tee_client_invoke_func(ctx, &inv_arg, param); > + if ((ret < 0) || (inv_arg.ret != 0)) { > + pr_err("TA_CMD_GET_ENTROPY invoke function error: %x\n", > + inv_arg.ret); > + return 0; > + } > + > + rng_data = tee_shm_get_va(entropy_shm_pool, 0); > + if (IS_ERR(rng_data)) { > + pr_err("tee_shm_get_va failed\n"); > + return 0; > + } > + > + rng_size = param[0].u.memref.size; > + memcpy(buf, rng_data, rng_size); > + > + return rng_size; > +} > + > +static int optee_rng_read(struct hwrng *rng, void *buf, size_t max, bool wait) > +{ > + u8 *data = buf; > + size_t read = 0, rng_size = 0; > + int timeout = 1; > + > + if (max > MAX_ENTROPY_REQ_SZ) > + max = MAX_ENTROPY_REQ_SZ; > + > + while (read == 0) { > + rng_size = get_optee_rng_data(data, (max - read)); > + > + data += rng_size; > + read += rng_size; > + > + if (wait) { > + if (timeout-- == 0) > + return read; > + msleep((1000 * (max - read)) / ta_rng_data_rate); > + } else { > + return read; > + } > + } > + > + return read; > +} > + > +static int optee_rng_init(struct hwrng *rng) > +{ > + entropy_shm_pool = tee_shm_alloc(ctx, MAX_ENTROPY_REQ_SZ, > + TEE_SHM_MAPPED | TEE_SHM_DMA_BUF); > + if (IS_ERR(entropy_shm_pool)) { > + pr_err("tee_shm_alloc failed\n"); > + return PTR_ERR(entropy_shm_pool); > + } > + > + return 0; > +} > + > +static void optee_rng_cleanup(struct hwrng *rng) > +{ > + tee_shm_free(entropy_shm_pool); > +} > + > +static struct hwrng optee_rng = { > + .name = DRIVER_NAME, > + .init = optee_rng_init, > + .cleanup = optee_rng_cleanup, > + .read = optee_rng_read, > +}; > + > +static int get_optee_rng_info(struct device *dev) > +{ > + u32 ret = 0; > + struct tee_ioctl_invoke_arg inv_arg = {0}; > + struct tee_param param[4] = {0}; > + > + /* Invoke TA_CMD_GET_RNG_INFO function of Trusted App */ > + inv_arg.func = TA_CMD_GET_RNG_INFO; > + inv_arg.session = ta_rng_session_id; > + inv_arg.num_params = 4; > + > + /* Fill invoke cmd params */ > + param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT; > + > + ret = tee_client_invoke_func(ctx, &inv_arg, param); > + if ((ret < 0) || (inv_arg.ret != 0)) { > + dev_err(dev, "TA_CMD_GET_RNG_INFO invoke func error: %x\n", > + inv_arg.ret); > + return -EINVAL; > + } > + > + ta_rng_data_rate = param[0].u.value.a; > + optee_rng.quality = param[0].u.value.b; > + > + return 0; > +} > + > +static int optee_ctx_match(struct tee_ioctl_version_data *ver, const void *data) > +{ > + if (ver->impl_id == TEE_IMPL_ID_OPTEE) > + return 1; > + else > + return 0; > +} > + > +static int optee_rng_probe(struct device *dev) > +{ > + struct tee_client_device *rng_device = to_tee_client_device(dev); > + int ret = 0, err = -ENODEV; > + struct tee_ioctl_open_session_arg sess_arg = {0}; > + > + /* Open context with TEE driver */ > + ctx = tee_client_open_context(NULL, optee_ctx_match, NULL, NULL); > + if (IS_ERR(ctx)) > + return -ENODEV; > + > + /* Open session with hwrng Trusted App */ > + memcpy(sess_arg.uuid, rng_device->id.uuid.b, TEE_IOCTL_UUID_LEN); > + sess_arg.clnt_login = TEE_IOCTL_LOGIN_PUBLIC; > + sess_arg.num_params = 0; > + > + ret = tee_client_open_session(ctx, &sess_arg, NULL); > + if ((ret < 0) || (sess_arg.ret != 0)) { > + dev_err(dev, "tee_client_open_session failed, error: %x\n", > + sess_arg.ret); > + err = -EINVAL; > + goto out_ctx; > + } > + ta_rng_session_id = sess_arg.session; > + > + err = get_optee_rng_info(dev); > + if (err) > + goto out_sess; > + > + err = hwrng_register(&optee_rng); > + if (err) { > + dev_err(dev, "hwrng registration failed (%d)\n", err); > + goto out_sess; > + } > + > + return 0; > + > +out_sess: > + tee_client_close_session(ctx, ta_rng_session_id); > +out_ctx: > + tee_client_close_context(ctx); > + > + return err; > +} > + > +static int optee_rng_remove(struct device *dev) > +{ > + hwrng_unregister(&optee_rng); > + tee_client_close_session(ctx, ta_rng_session_id); > + tee_client_close_context(ctx); > + > + return 0; > +} > + > +const struct tee_client_device_id optee_rng_id_table[] = { > + {UUID_INIT(0xab7a617c, 0xb8e7, 0x4d8f, > + 0x83, 0x01, 0xd0, 0x9b, 0x61, 0x03, 0x6b, 0x64)}, > + {} > +}; > + > +MODULE_DEVICE_TABLE(tee, optee_rng_id_table); > + > +static struct tee_client_driver optee_rng_driver = { > + .id_table = optee_rng_id_table, > + .driver = { > + .name = DRIVER_NAME, > + .bus = &tee_bus_type, > + .probe = optee_rng_probe, > + .remove = optee_rng_remove, > + }, > +}; > + > +static int __init optee_rng_mod_init(void) > +{ > + int rc; > + > + rc = driver_register(&optee_rng_driver.driver); > + if (rc) > + pr_warn("driver registration failed, err: %d", rc); > + > + return rc; > +} > + > +static void __exit optee_rng_mod_exit(void) > +{ > + driver_unregister(&optee_rng_driver.driver); > +} > + > +module_init(optee_rng_mod_init); > +module_exit(optee_rng_mod_exit); > + > +MODULE_LICENSE("GPL v2"); > +MODULE_AUTHOR("Sumit Garg <sumit.garg@linaro.org>"); > +MODULE_DESCRIPTION("OP-TEE based random number generator driver"); > -- > 2.7.4 >
diff --git a/MAINTAINERS b/MAINTAINERS index 51029a4..dcef7e9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11262,6 +11262,11 @@ M: Jens Wiklander <jens.wiklander@linaro.org> S: Maintained F: drivers/tee/optee/ +OP-TEE RANDOM NUMBER GENERATOR (RNG) DRIVER +M: Sumit Garg <sumit.garg@linaro.org> +S: Maintained +F: drivers/char/hw_random/optee-rng.c + OPA-VNIC DRIVER M: Dennis Dalessandro <dennis.dalessandro@intel.com> M: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig index dac895d..25a7d8f 100644 --- a/drivers/char/hw_random/Kconfig +++ b/drivers/char/hw_random/Kconfig @@ -424,6 +424,21 @@ config HW_RANDOM_EXYNOS will be called exynos-trng. If unsure, say Y. + +config HW_RANDOM_OPTEE + tristate "OP-TEE based Random Number Generator support" + depends on OPTEE + default HW_RANDOM + help + This driver provides support for OP-TEE based Random Number + Generator on ARM SoCs where hardware entropy sources are not + accessible to normal world (Linux). + + To compile this driver as a module, choose M here: the module + will be called optee-rng. + + If unsure, say Y. + endif # HW_RANDOM config UML_RANDOM diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile index e35ec3c..7c9ef4a 100644 --- a/drivers/char/hw_random/Makefile +++ b/drivers/char/hw_random/Makefile @@ -38,3 +38,4 @@ obj-$(CONFIG_HW_RANDOM_CAVIUM) += cavium-rng.o cavium-rng-vf.o obj-$(CONFIG_HW_RANDOM_MTK) += mtk-rng.o obj-$(CONFIG_HW_RANDOM_S390) += s390-trng.o obj-$(CONFIG_HW_RANDOM_KEYSTONE) += ks-sa-rng.o +obj-$(CONFIG_HW_RANDOM_OPTEE) += optee-rng.o diff --git a/drivers/char/hw_random/optee-rng.c b/drivers/char/hw_random/optee-rng.c new file mode 100644 index 0000000..4ad0eca --- /dev/null +++ b/drivers/char/hw_random/optee-rng.c @@ -0,0 +1,274 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2018-2019 Linaro Ltd. + */ + +#include <linux/delay.h> +#include <linux/of.h> +#include <linux/hw_random.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/tee_drv.h> +#include <linux/uuid.h> + +#define DRIVER_NAME "optee-rng" + +#define TEE_ERROR_HEALTH_TEST_FAIL 0x00000001 + +/* + * TA_CMD_GET_ENTROPY - Get Entropy from RNG + * + * param[0] (inout memref) - Entropy buffer memory reference + * param[1] unused + * param[2] unused + * param[3] unused + * + * Result: + * TEE_SUCCESS - Invoke command success + * TEE_ERROR_BAD_PARAMETERS - Incorrect input param + * TEE_ERROR_NOT_SUPPORTED - Requested entropy size greater than size of pool + * TEE_ERROR_HEALTH_TEST_FAIL - Continuous health testing failed + */ +#define TA_CMD_GET_ENTROPY 0x0 + +/* + * TA_CMD_GET_RNG_INFO - Get RNG information + * + * param[0] (out value) - value.a: RNG data-rate in bytes per second + * value.b: Quality/Entropy per 1024 bit of data + * param[1] unused + * param[2] unused + * param[3] unused + * + * Result: + * TEE_SUCCESS - Invoke command success + * TEE_ERROR_BAD_PARAMETERS - Incorrect input param + */ +#define TA_CMD_GET_RNG_INFO 0x1 + +#define MAX_ENTROPY_REQ_SZ (4 * 1024) + +static struct tee_context *ctx; +static struct tee_shm *entropy_shm_pool; +static u32 ta_rng_data_rate; +static u32 ta_rng_session_id; + +static size_t get_optee_rng_data(void *buf, size_t req_size) +{ + u32 ret = 0; + u8 *rng_data = NULL; + size_t rng_size = 0; + struct tee_ioctl_invoke_arg inv_arg = {0}; + struct tee_param param[4] = {0}; + + /* Invoke TA_CMD_GET_ENTROPY function of Trusted App */ + inv_arg.func = TA_CMD_GET_ENTROPY; + inv_arg.session = ta_rng_session_id; + inv_arg.num_params = 4; + + /* Fill invoke cmd params */ + param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INOUT; + param[0].u.memref.shm = entropy_shm_pool; + param[0].u.memref.size = req_size; + param[0].u.memref.shm_offs = 0; + + ret = tee_client_invoke_func(ctx, &inv_arg, param); + if ((ret < 0) || (inv_arg.ret != 0)) { + pr_err("TA_CMD_GET_ENTROPY invoke function error: %x\n", + inv_arg.ret); + return 0; + } + + rng_data = tee_shm_get_va(entropy_shm_pool, 0); + if (IS_ERR(rng_data)) { + pr_err("tee_shm_get_va failed\n"); + return 0; + } + + rng_size = param[0].u.memref.size; + memcpy(buf, rng_data, rng_size); + + return rng_size; +} + +static int optee_rng_read(struct hwrng *rng, void *buf, size_t max, bool wait) +{ + u8 *data = buf; + size_t read = 0, rng_size = 0; + int timeout = 1; + + if (max > MAX_ENTROPY_REQ_SZ) + max = MAX_ENTROPY_REQ_SZ; + + while (read == 0) { + rng_size = get_optee_rng_data(data, (max - read)); + + data += rng_size; + read += rng_size; + + if (wait) { + if (timeout-- == 0) + return read; + msleep((1000 * (max - read)) / ta_rng_data_rate); + } else { + return read; + } + } + + return read; +} + +static int optee_rng_init(struct hwrng *rng) +{ + entropy_shm_pool = tee_shm_alloc(ctx, MAX_ENTROPY_REQ_SZ, + TEE_SHM_MAPPED | TEE_SHM_DMA_BUF); + if (IS_ERR(entropy_shm_pool)) { + pr_err("tee_shm_alloc failed\n"); + return PTR_ERR(entropy_shm_pool); + } + + return 0; +} + +static void optee_rng_cleanup(struct hwrng *rng) +{ + tee_shm_free(entropy_shm_pool); +} + +static struct hwrng optee_rng = { + .name = DRIVER_NAME, + .init = optee_rng_init, + .cleanup = optee_rng_cleanup, + .read = optee_rng_read, +}; + +static int get_optee_rng_info(struct device *dev) +{ + u32 ret = 0; + struct tee_ioctl_invoke_arg inv_arg = {0}; + struct tee_param param[4] = {0}; + + /* Invoke TA_CMD_GET_RNG_INFO function of Trusted App */ + inv_arg.func = TA_CMD_GET_RNG_INFO; + inv_arg.session = ta_rng_session_id; + inv_arg.num_params = 4; + + /* Fill invoke cmd params */ + param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT; + + ret = tee_client_invoke_func(ctx, &inv_arg, param); + if ((ret < 0) || (inv_arg.ret != 0)) { + dev_err(dev, "TA_CMD_GET_RNG_INFO invoke func error: %x\n", + inv_arg.ret); + return -EINVAL; + } + + ta_rng_data_rate = param[0].u.value.a; + optee_rng.quality = param[0].u.value.b; + + return 0; +} + +static int optee_ctx_match(struct tee_ioctl_version_data *ver, const void *data) +{ + if (ver->impl_id == TEE_IMPL_ID_OPTEE) + return 1; + else + return 0; +} + +static int optee_rng_probe(struct device *dev) +{ + struct tee_client_device *rng_device = to_tee_client_device(dev); + int ret = 0, err = -ENODEV; + struct tee_ioctl_open_session_arg sess_arg = {0}; + + /* Open context with TEE driver */ + ctx = tee_client_open_context(NULL, optee_ctx_match, NULL, NULL); + if (IS_ERR(ctx)) + return -ENODEV; + + /* Open session with hwrng Trusted App */ + memcpy(sess_arg.uuid, rng_device->id.uuid.b, TEE_IOCTL_UUID_LEN); + sess_arg.clnt_login = TEE_IOCTL_LOGIN_PUBLIC; + sess_arg.num_params = 0; + + ret = tee_client_open_session(ctx, &sess_arg, NULL); + if ((ret < 0) || (sess_arg.ret != 0)) { + dev_err(dev, "tee_client_open_session failed, error: %x\n", + sess_arg.ret); + err = -EINVAL; + goto out_ctx; + } + ta_rng_session_id = sess_arg.session; + + err = get_optee_rng_info(dev); + if (err) + goto out_sess; + + err = hwrng_register(&optee_rng); + if (err) { + dev_err(dev, "hwrng registration failed (%d)\n", err); + goto out_sess; + } + + return 0; + +out_sess: + tee_client_close_session(ctx, ta_rng_session_id); +out_ctx: + tee_client_close_context(ctx); + + return err; +} + +static int optee_rng_remove(struct device *dev) +{ + hwrng_unregister(&optee_rng); + tee_client_close_session(ctx, ta_rng_session_id); + tee_client_close_context(ctx); + + return 0; +} + +const struct tee_client_device_id optee_rng_id_table[] = { + {UUID_INIT(0xab7a617c, 0xb8e7, 0x4d8f, + 0x83, 0x01, 0xd0, 0x9b, 0x61, 0x03, 0x6b, 0x64)}, + {} +}; + +MODULE_DEVICE_TABLE(tee, optee_rng_id_table); + +static struct tee_client_driver optee_rng_driver = { + .id_table = optee_rng_id_table, + .driver = { + .name = DRIVER_NAME, + .bus = &tee_bus_type, + .probe = optee_rng_probe, + .remove = optee_rng_remove, + }, +}; + +static int __init optee_rng_mod_init(void) +{ + int rc; + + rc = driver_register(&optee_rng_driver.driver); + if (rc) + pr_warn("driver registration failed, err: %d", rc); + + return rc; +} + +static void __exit optee_rng_mod_exit(void) +{ + driver_unregister(&optee_rng_driver.driver); +} + +module_init(optee_rng_mod_init); +module_exit(optee_rng_mod_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Sumit Garg <sumit.garg@linaro.org>"); +MODULE_DESCRIPTION("OP-TEE based random number generator driver");
On ARM SoC's with TrustZone enabled, peripherals like entropy sources might not be accessible to normal world (linux in this case) and rather accessible to secure world (OP-TEE in this case) only. So this driver aims to provides a generic interface to OP-TEE based random number generator service. This driver registers on TEE bus to interact with OP-TEE based rng device/service. Signed-off-by: Sumit Garg <sumit.garg@linaro.org> --- MAINTAINERS | 5 + drivers/char/hw_random/Kconfig | 15 ++ drivers/char/hw_random/Makefile | 1 + drivers/char/hw_random/optee-rng.c | 274 +++++++++++++++++++++++++++++++++++++ 4 files changed, 295 insertions(+) create mode 100644 drivers/char/hw_random/optee-rng.c