| Message ID | 1548242520-13773-1-git-send-email-tdas@codeaurora.org (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | viresh kumar |
| Headers | show |
| Series | [v5] cpufreq: qcom: Read voltage LUT and populate OPP | expand |
Hi Taniya, On Wed, Jan 23, 2019 at 04:52:00PM +0530, Taniya Das wrote: > Add support to read the voltage look up table and populate OPP for all > corresponding CPUS for consumers like the energy model could use the > frequency and voltage from the OPP tables. Also update the logic to not add > duplicate OPPs. > > Tested-by: Matthias Kaehlcke <mka@chromium.org> > Signed-off-by: Matthias Kaehlcke <mka@chromium.org> > Signed-off-by: Taniya Das <tdas@codeaurora.org> > --- > drivers/cpufreq/qcom-cpufreq-hw.c | 46 +++++++++++++++++++++++++++++++-------- > 1 file changed, 37 insertions(+), 9 deletions(-) > > diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c > index d83939a..402ce81 100644 > --- a/drivers/cpufreq/qcom-cpufreq-hw.c > +++ b/drivers/cpufreq/qcom-cpufreq-hw.c > @@ -10,18 +10,21 @@ > #include <linux/module.h> > #include <linux/of_address.h> > #include <linux/of_platform.h> > +#include <linux/pm_opp.h> > #include <linux/slab.h> > > #define LUT_MAX_ENTRIES 40U > #define LUT_SRC GENMASK(31, 30) > #define LUT_L_VAL GENMASK(7, 0) > #define LUT_CORE_COUNT GENMASK(18, 16) > +#define LUT_VOLT GENMASK(11, 0) > #define LUT_ROW_SIZE 32 > #define CLK_HW_DIV 2 > > /* Register offsets */ > #define REG_ENABLE 0x0 > -#define REG_LUT_TABLE 0x110 > +#define REG_FREQ_LUT 0x110 > +#define REG_VOLT_LUT 0x114 > #define REG_PERF_STATE 0x920 > > static unsigned long cpu_hw_rate, xo_rate; > @@ -70,11 +73,12 @@ static unsigned int qcom_cpufreq_hw_fast_switch(struct cpufreq_policy *policy, > return policy->freq_table[index].frequency; > } > > -static int qcom_cpufreq_hw_read_lut(struct device *dev, > +static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev, > struct cpufreq_policy *policy, > void __iomem *base) > { > u32 data, src, lval, i, core_count, prev_cc = 0, prev_freq = 0, freq; > + u32 volt; > unsigned int max_cores = cpumask_weight(policy->cpus); > struct cpufreq_frequency_table *table; > > @@ -83,23 +87,28 @@ static int qcom_cpufreq_hw_read_lut(struct device *dev, > return -ENOMEM; > > for (i = 0; i < LUT_MAX_ENTRIES; i++) { > - data = readl_relaxed(base + REG_LUT_TABLE + i * LUT_ROW_SIZE); > + data = readl_relaxed(base + REG_FREQ_LUT + > + i * LUT_ROW_SIZE); > src = FIELD_GET(LUT_SRC, data); > lval = FIELD_GET(LUT_L_VAL, data); > core_count = FIELD_GET(LUT_CORE_COUNT, data); > > + data = readl_relaxed(base + REG_VOLT_LUT + > + i * LUT_ROW_SIZE); > + volt = FIELD_GET(LUT_VOLT, data) * 1000; > + > if (src) > freq = xo_rate * lval / 1000; > else > freq = cpu_hw_rate / 1000; > > - /* Ignore boosts in the middle of the table */ > - if (core_count != max_cores) { > - table[i].frequency = CPUFREQ_ENTRY_INVALID; > - } else { > + if (freq != prev_freq && core_count == max_cores) { > table[i].frequency = freq; > - dev_dbg(dev, "index=%d freq=%d, core_count %d\n", i, > + dev_pm_opp_add(cpu_dev, freq * 1000, volt); > + dev_dbg(cpu_dev, "index=%d freq=%d, core_count %d\n", i, > freq, core_count); > + } else { > + table[i].frequency = CPUFREQ_ENTRY_INVALID; > } > > /* > @@ -116,6 +125,7 @@ static int qcom_cpufreq_hw_read_lut(struct device *dev, > if (prev_cc != max_cores) { > prev->frequency = prev_freq; > prev->flags = CPUFREQ_BOOST_FREQ; > + dev_pm_opp_add(cpu_dev, prev_freq * 1000, volt); > } > > break; > @@ -127,6 +137,7 @@ static int qcom_cpufreq_hw_read_lut(struct device *dev, > > table[i].frequency = CPUFREQ_TABLE_END; > policy->freq_table = table; > + dev_pm_opp_set_sharing_cpus(cpu_dev, policy->cpus); > > return 0; > } > @@ -159,10 +170,18 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy) > struct device *dev = &global_pdev->dev; > struct of_phandle_args args; > struct device_node *cpu_np; > + struct device *cpu_dev; > struct resource *res; > void __iomem *base; > int ret, index; > > + cpu_dev = get_cpu_device(policy->cpu); > + if (!cpu_dev) { > + pr_err("%s: failed to get cpu%d device\n", __func__, > + policy->cpu); > + return -ENODEV; > + } > + > cpu_np = of_cpu_device_node_get(policy->cpu); > if (!cpu_np) > return -EINVAL; > @@ -199,12 +218,19 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy) > > policy->driver_data = base + REG_PERF_STATE; > > - ret = qcom_cpufreq_hw_read_lut(dev, policy, base); > + ret = qcom_cpufreq_hw_read_lut(cpu_dev, policy, base); > if (ret) { > dev_err(dev, "Domain-%d failed to read LUT\n", index); > goto error; > } > > + ret = dev_pm_opp_get_opp_count(cpu_dev); > + if (ret <= 0) { > + dev_err(cpu_dev, "Failed to add OPPs\n"); > + ret = -EINVAL; nit: in seems -ENODEV would be more correct, it's also what dev_pm_opp_get_opp_count() would return if the device had no OPP table: https://elixir.bootlin.com/linux/v4.20.4/source/drivers/opp/core.c#L65 > + goto error; > + } > + > policy->fast_switch_possible = true; > > return 0; > @@ -215,8 +241,10 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy) > > static int qcom_cpufreq_hw_cpu_exit(struct cpufreq_policy *policy) > { > + struct device *cpu_dev = get_cpu_device(policy->cpu); > void __iomem *base = policy->driver_data - REG_PERF_STATE; > > + dev_pm_opp_remove_all_dynamic(cpu_dev); > kfree(policy->freq_table); > devm_iounmap(&global_pdev->dev, base); Other than the nit about the return value: Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Also re-tested it, so the earlier Tested-by tag is applicable again :) Thanks Matthias
On 1/23/2019 11:50 PM, Matthias Kaehlcke wrote: > Hi Taniya, > > On Wed, Jan 23, 2019 at 04:52:00PM +0530, Taniya Das wrote: >> Add support to read the voltage look up table and populate OPP for all >> corresponding CPUS for consumers like the energy model could use the >> frequency and voltage from the OPP tables. Also update the logic to not add >> duplicate OPPs. >> >> Tested-by: Matthias Kaehlcke <mka@chromium.org> >> Signed-off-by: Matthias Kaehlcke <mka@chromium.org> >> Signed-off-by: Taniya Das <tdas@codeaurora.org> >> --- >> drivers/cpufreq/qcom-cpufreq-hw.c | 46 +++++++++++++++++++++++++++++++-------- >> 1 file changed, 37 insertions(+), 9 deletions(-) >> >> diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c >> index d83939a..402ce81 100644 >> --- a/drivers/cpufreq/qcom-cpufreq-hw.c >> +++ b/drivers/cpufreq/qcom-cpufreq-hw.c >> @@ -10,18 +10,21 @@ >> #include <linux/module.h> >> #include <linux/of_address.h> >> #include <linux/of_platform.h> >> +#include <linux/pm_opp.h> >> #include <linux/slab.h> >> >> #define LUT_MAX_ENTRIES 40U >> #define LUT_SRC GENMASK(31, 30) >> #define LUT_L_VAL GENMASK(7, 0) >> #define LUT_CORE_COUNT GENMASK(18, 16) >> +#define LUT_VOLT GENMASK(11, 0) >> #define LUT_ROW_SIZE 32 >> #define CLK_HW_DIV 2 >> >> /* Register offsets */ >> #define REG_ENABLE 0x0 >> -#define REG_LUT_TABLE 0x110 >> +#define REG_FREQ_LUT 0x110 >> +#define REG_VOLT_LUT 0x114 >> #define REG_PERF_STATE 0x920 >> >> static unsigned long cpu_hw_rate, xo_rate; >> @@ -70,11 +73,12 @@ static unsigned int qcom_cpufreq_hw_fast_switch(struct cpufreq_policy *policy, >> return policy->freq_table[index].frequency; >> } >> >> -static int qcom_cpufreq_hw_read_lut(struct device *dev, >> +static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev, >> struct cpufreq_policy *policy, >> void __iomem *base) >> { >> u32 data, src, lval, i, core_count, prev_cc = 0, prev_freq = 0, freq; >> + u32 volt; >> unsigned int max_cores = cpumask_weight(policy->cpus); >> struct cpufreq_frequency_table *table; >> >> @@ -83,23 +87,28 @@ static int qcom_cpufreq_hw_read_lut(struct device *dev, >> return -ENOMEM; >> >> for (i = 0; i < LUT_MAX_ENTRIES; i++) { >> - data = readl_relaxed(base + REG_LUT_TABLE + i * LUT_ROW_SIZE); >> + data = readl_relaxed(base + REG_FREQ_LUT + >> + i * LUT_ROW_SIZE); >> src = FIELD_GET(LUT_SRC, data); >> lval = FIELD_GET(LUT_L_VAL, data); >> core_count = FIELD_GET(LUT_CORE_COUNT, data); >> >> + data = readl_relaxed(base + REG_VOLT_LUT + >> + i * LUT_ROW_SIZE); >> + volt = FIELD_GET(LUT_VOLT, data) * 1000; >> + >> if (src) >> freq = xo_rate * lval / 1000; >> else >> freq = cpu_hw_rate / 1000; >> >> - /* Ignore boosts in the middle of the table */ >> - if (core_count != max_cores) { >> - table[i].frequency = CPUFREQ_ENTRY_INVALID; >> - } else { >> + if (freq != prev_freq && core_count == max_cores) { >> table[i].frequency = freq; >> - dev_dbg(dev, "index=%d freq=%d, core_count %d\n", i, >> + dev_pm_opp_add(cpu_dev, freq * 1000, volt); >> + dev_dbg(cpu_dev, "index=%d freq=%d, core_count %d\n", i, >> freq, core_count); >> + } else { >> + table[i].frequency = CPUFREQ_ENTRY_INVALID; >> } >> >> /* >> @@ -116,6 +125,7 @@ static int qcom_cpufreq_hw_read_lut(struct device *dev, >> if (prev_cc != max_cores) { >> prev->frequency = prev_freq; >> prev->flags = CPUFREQ_BOOST_FREQ; >> + dev_pm_opp_add(cpu_dev, prev_freq * 1000, volt); >> } >> >> break; >> @@ -127,6 +137,7 @@ static int qcom_cpufreq_hw_read_lut(struct device *dev, >> >> table[i].frequency = CPUFREQ_TABLE_END; >> policy->freq_table = table; >> + dev_pm_opp_set_sharing_cpus(cpu_dev, policy->cpus); >> >> return 0; >> } >> @@ -159,10 +170,18 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy) >> struct device *dev = &global_pdev->dev; >> struct of_phandle_args args; >> struct device_node *cpu_np; >> + struct device *cpu_dev; >> struct resource *res; >> void __iomem *base; >> int ret, index; >> >> + cpu_dev = get_cpu_device(policy->cpu); >> + if (!cpu_dev) { >> + pr_err("%s: failed to get cpu%d device\n", __func__, >> + policy->cpu); >> + return -ENODEV; >> + } >> + >> cpu_np = of_cpu_device_node_get(policy->cpu); >> if (!cpu_np) >> return -EINVAL; >> @@ -199,12 +218,19 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy) >> >> policy->driver_data = base + REG_PERF_STATE; >> >> - ret = qcom_cpufreq_hw_read_lut(dev, policy, base); >> + ret = qcom_cpufreq_hw_read_lut(cpu_dev, policy, base); >> if (ret) { >> dev_err(dev, "Domain-%d failed to read LUT\n", index); >> goto error; >> } >> >> + ret = dev_pm_opp_get_opp_count(cpu_dev); >> + if (ret <= 0) { >> + dev_err(cpu_dev, "Failed to add OPPs\n"); >> + ret = -EINVAL; > > nit: in seems -ENODEV would be more correct, it's also what > dev_pm_opp_get_opp_count() would return if the device had no OPP table: > https://elixir.bootlin.com/linux/v4.20.4/source/drivers/opp/core.c#L65 > Thanks updating it in the next patch. >> + goto error; >> + } >> + >> policy->fast_switch_possible = true; >> >> return 0; >> @@ -215,8 +241,10 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy) >> >> static int qcom_cpufreq_hw_cpu_exit(struct cpufreq_policy *policy) >> { >> + struct device *cpu_dev = get_cpu_device(policy->cpu); >> void __iomem *base = policy->driver_data - REG_PERF_STATE; >> >> + dev_pm_opp_remove_all_dynamic(cpu_dev); >> kfree(policy->freq_table); >> devm_iounmap(&global_pdev->dev, base); > > Other than the nit about the return value: > > Reviewed-by: Matthias Kaehlcke <mka@chromium.org> > > Also re-tested it, so the earlier Tested-by tag is applicable again :) > > Thanks > > Matthias >
diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c index d83939a..402ce81 100644 --- a/drivers/cpufreq/qcom-cpufreq-hw.c +++ b/drivers/cpufreq/qcom-cpufreq-hw.c @@ -10,18 +10,21 @@ #include <linux/module.h> #include <linux/of_address.h> #include <linux/of_platform.h> +#include <linux/pm_opp.h> #include <linux/slab.h> #define LUT_MAX_ENTRIES 40U #define LUT_SRC GENMASK(31, 30) #define LUT_L_VAL GENMASK(7, 0) #define LUT_CORE_COUNT GENMASK(18, 16) +#define LUT_VOLT GENMASK(11, 0) #define LUT_ROW_SIZE 32 #define CLK_HW_DIV 2 /* Register offsets */ #define REG_ENABLE 0x0 -#define REG_LUT_TABLE 0x110 +#define REG_FREQ_LUT 0x110 +#define REG_VOLT_LUT 0x114 #define REG_PERF_STATE 0x920 static unsigned long cpu_hw_rate, xo_rate; @@ -70,11 +73,12 @@ static unsigned int qcom_cpufreq_hw_fast_switch(struct cpufreq_policy *policy, return policy->freq_table[index].frequency; } -static int qcom_cpufreq_hw_read_lut(struct device *dev, +static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev, struct cpufreq_policy *policy, void __iomem *base) { u32 data, src, lval, i, core_count, prev_cc = 0, prev_freq = 0, freq; + u32 volt; unsigned int max_cores = cpumask_weight(policy->cpus); struct cpufreq_frequency_table *table; @@ -83,23 +87,28 @@ static int qcom_cpufreq_hw_read_lut(struct device *dev, return -ENOMEM; for (i = 0; i < LUT_MAX_ENTRIES; i++) { - data = readl_relaxed(base + REG_LUT_TABLE + i * LUT_ROW_SIZE); + data = readl_relaxed(base + REG_FREQ_LUT + + i * LUT_ROW_SIZE); src = FIELD_GET(LUT_SRC, data); lval = FIELD_GET(LUT_L_VAL, data); core_count = FIELD_GET(LUT_CORE_COUNT, data); + data = readl_relaxed(base + REG_VOLT_LUT + + i * LUT_ROW_SIZE); + volt = FIELD_GET(LUT_VOLT, data) * 1000; + if (src) freq = xo_rate * lval / 1000; else freq = cpu_hw_rate / 1000; - /* Ignore boosts in the middle of the table */ - if (core_count != max_cores) { - table[i].frequency = CPUFREQ_ENTRY_INVALID; - } else { + if (freq != prev_freq && core_count == max_cores) { table[i].frequency = freq; - dev_dbg(dev, "index=%d freq=%d, core_count %d\n", i, + dev_pm_opp_add(cpu_dev, freq * 1000, volt); + dev_dbg(cpu_dev, "index=%d freq=%d, core_count %d\n", i, freq, core_count); + } else { + table[i].frequency = CPUFREQ_ENTRY_INVALID; } /* @@ -116,6 +125,7 @@ static int qcom_cpufreq_hw_read_lut(struct device *dev, if (prev_cc != max_cores) { prev->frequency = prev_freq; prev->flags = CPUFREQ_BOOST_FREQ; + dev_pm_opp_add(cpu_dev, prev_freq * 1000, volt); } break; @@ -127,6 +137,7 @@ static int qcom_cpufreq_hw_read_lut(struct device *dev, table[i].frequency = CPUFREQ_TABLE_END; policy->freq_table = table; + dev_pm_opp_set_sharing_cpus(cpu_dev, policy->cpus); return 0; } @@ -159,10 +170,18 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy) struct device *dev = &global_pdev->dev; struct of_phandle_args args; struct device_node *cpu_np; + struct device *cpu_dev; struct resource *res; void __iomem *base; int ret, index; + cpu_dev = get_cpu_device(policy->cpu); + if (!cpu_dev) { + pr_err("%s: failed to get cpu%d device\n", __func__, + policy->cpu); + return -ENODEV; + } + cpu_np = of_cpu_device_node_get(policy->cpu); if (!cpu_np) return -EINVAL; @@ -199,12 +218,19 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy) policy->driver_data = base + REG_PERF_STATE; - ret = qcom_cpufreq_hw_read_lut(dev, policy, base); + ret = qcom_cpufreq_hw_read_lut(cpu_dev, policy, base); if (ret) { dev_err(dev, "Domain-%d failed to read LUT\n", index); goto error; } + ret = dev_pm_opp_get_opp_count(cpu_dev); + if (ret <= 0) { + dev_err(cpu_dev, "Failed to add OPPs\n"); + ret = -EINVAL; + goto error; + } + policy->fast_switch_possible = true; return 0; @@ -215,8 +241,10 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy) static int qcom_cpufreq_hw_cpu_exit(struct cpufreq_policy *policy) { + struct device *cpu_dev = get_cpu_device(policy->cpu); void __iomem *base = policy->driver_data - REG_PERF_STATE; + dev_pm_opp_remove_all_dynamic(cpu_dev); kfree(policy->freq_table); devm_iounmap(&global_pdev->dev, base);