| Message ID | 20190203211753.7b2d02cd@archlinux (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [PULL] First set of IIO new device support etc for 5.1 | expand |
On Sun, Feb 03, 2019 at 09:17:53PM +0000, Jonathan Cameron wrote: > The following changes since commit c6cbcdea7ab94120b676a4865e9782ed3c06dc80: > > Merge tag 'iio-for-4.21b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next (2018-12-13 13:37:24 +0100) > > are available in the Git repository at: > > git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.1a Pulled and pushed out, thanks. greg k-h
The following changes since commit c6cbcdea7ab94120b676a4865e9782ed3c06dc80: Merge tag 'iio-for-4.21b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next (2018-12-13 13:37:24 +0100) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.1a for you to fetch changes up to 3fa30bf7004bb8069826ef85487f4753666a73da: iio: chemical: sps30: remove printk format specifier (2019-02-02 17:08:06 +0000) ---------------------------------------------------------------- First set of new device support, features and cleanup for IIO in the 5.1 cycle A number of interesting new devices supported plus a good set of staging cleanup including one graduation and one drop. New device support * ad56886 - Add support for AD5674R/AD5679R with some minor driver changes to support more channels. * ad7768 - New driver and dt bindings for this 24 bit ADC. * max44009 - New driver and dt bindings for this ambient light sensor. * mpu6050 - Support the ICM 20602 IMU. Minor tweaks due to slightly different register map. * NPCM adc - New driver and dt bindings for this BMC ADC. * Sensiron SGP30 - Modifiers for ethanol and H2. - New driver and dt bindings. - Follow patch added self cleaning support. * Sensiron SPS30 - New channel type for mass concentration. - New driver and bindings. - Minor tidy up patch followed (drop fmt specifier as unused) * st_pressure - lps22hh support. ID plus information structures and dt bindings. * ti-ads124s08 - Add binding doc and driver. Staging graduations * ad7606 driver and bindings. Staging drops * ad7152 CDC driver dropped. This part is near EoL and no one is known to be using it. If anyone surfaces obviously we can bring the driver back. If not, good to drop it to avoid wasting anyone's time cleaning it up. New features * bme680 - DT support and bindings doc. * isl29018 - Add regulator for VCC. * mag3110 - Add regulators for supplies. * meson-saradc - Support the temperature sensors of more SoCs. * mma8452 - Add regulators for power suplies and binding docs to reflect them. * st-accel - Support the undocumented but it seems fairly common _ONT ACPI method to specify orientation of the sensor. Cleanup, minor fixes and fixes for staging driver that have been broken a long time * ad5933 - Drop platform data alternative to specifying the reference voltage using a regulator. - Use the clock framework to contorl the reference clock. - Add a DT binding doc to cover the defacto binding. * ad7280a - Split up some big functions to improve readability. * ad7606 - Allow for timeout if interrupt never occurs. - Use devm functions to simplify probe and remove. - Use the find_closest macro to avoid need for precise values from userspace. - Add missing vendor prefixes for various DT properties. Note the driver is in staging still and there are no known devicetrees. - Add explict OF device ID table. - Simplify the Kconfig choices - Change to a threaded IRQ. - SPDX and simple stype fixes. * ad7816 - Drop unnecessary variable init. * ad9523 - Check a return value that was ignored. * ad9833 - Drop platform data. It was just setting most values to the hardware defaults. - Use the clock framework to provide the input clock. * adt7316 (lots of staging cleanup) - Fix some wrong register / bit definitions - Invert the logic of the check for an ldac pin so it actually makes sense. - Read the right register to get internal vref settings - Allow adt751x chips to use the internal vref for all DAC channels rather than a subset. - Remove dac vref bypass control from parts that don't have one. - Make the store DAC update mode function consistent with the show one. - Fix some spellings and other minor tidy up. - Avoid passing irq numbers around by putting all the irq logic in one place. - Fix an issue with the resolution of DAC control. - Fix support of the high resolution DAC mode (for temp proportional output) where supported. - Fix DAC read and write calculations. * st_lsm6dsx - Drop an unused variable (set but not read) * xilinx-xadc - Check an unhandled return value. ---------------------------------------------------------------- Aditya Pakki (1): iio: adc: xilinx: check return value of xadc_write_adc_reg Alexandru Ardelean (1): staging: iio: cdc: ad7152: remove driver completely Andreas Brauchli (3): iio: Add modifiers for ethanol and H2 gases iio: chemical: sgp30: Support Sensirion SGP30/SGPC3 sensors iio: chemical: sgp30: add device tree support Anson Huang (4): iio: magnetometer: mag3110: add vdd/vddio regulator operation support iio: light: isl29018: add vcc regulator operation support dt-bindings: iio: accel: mma8452: add power supplies property iio: accell: mma8452: add vdd/vddio regulator operation support Beniamin Bia (2): staging: iio: frequency: ad9833: Get frequency value statically staging: iio: frequency: ad9833: Load clock using clock framework Dan Murphy (2): iio: ti-ads124s08: Add DT binding documentation iio: adc: Add the TI ads124s08 ADC code Daniel Drake (1): iio: st_accel: use ACPI orientation data Hardik Singh Rathore (2): staging: iio: adt7316: drop unnecessary initialization of variables staging: iio: ad7816: drop unnecessary initialization of variables Jeremy Fertic (11): staging: iio: adt7316: fix register and bit definitions staging: iio: adt7316: invert the logic of the check for an ldac pin staging: iio: adt7316: use correct variable in DAC_internal_Vref read staging: iio: adt7316: allow adt751x to use internal vref for all dacs staging: iio: adt7316: remove dac vref buffer bypass from adt751x staging: iio: adt7316: change interpretation of write to dac update mode staging: iio: adt7316: correct spelling of ADT7316_DA_EN_VIA_DAC_LDCA staging: iio: adt7316: fix dac_bits assignment staging: iio: adt7316: fix handling of dac high resolution option staging: iio: adt7316: fix the dac read calculation staging: iio: adt7316: fix the dac write calculation Kangjie Lu (1): iio: ad9523: fix a missing check of return value Lorenzo Bianconi (1): dt-bindings: iio: pressure: add LPS22HH bindings Marcelo Schmitt (3): staging: iio: ad5933: change regulator binging for vref staging: iio: ad5933: use clock framework for clock reference staging: iio: ad5933: add binding doc for ad5933 Martin Blumenstingl (2): dt-bindings: iio: adc: meson-saradc: update temperature sensor support iio: adc: meson-saradc: enable the temperature sensor two more SoCs Mircea Caprioru (1): iio: dac: ad5686: Add support for AD5674R/AD5679R Randolph Maaßen (2): dt-bindings: iio: imu: add icm20602 bindings to mpu6050 iio: imu: mpu6050: Add support for the ICM 20602 IMU Robert Eshleman (2): iio: light: add driver for MAX44009 dt-bindings: iio: light: Add max44009 Sebastien Bourdelin (2): iio: chemical: bme680: Add device-tree support dt-bindings: iio: chemical: Add bindings for bme680 Shreeya Patel (1): Staging: iio: adt7316: Add all irq related code in adt7316_irq_setup() Slawomir Stepien (2): staging: iio: adc: ad7280a: split ad7280_channel_init() to more functions staging: iio: adc: ad7280a: split ad7280_attr_init() to more functions Stefan Popa (13): staging: iio: adc: ad7606: Use wait-for-completion handler staging: iio: adc: ad7606: Use devm functions in probe staging: iio: adc: ad7606: Use find_closest() macro staging: iio: adc: ad7606: Use vendor prefix for DT properties staging: iio: adc: ad7606: Add OF device ID table staging: iio: adc: ad7606: Simplify the Kconfing menu staging: iio: adc: ad7606: Use SPDX identifier staging: iio: adc: ad7606: Add support for threaded irq staging: iio: adc: ad7606: Misc style fixes (no functional change) staging: iio: adc: ad7606: Move out of staging dt-bindings: iio: adc: Add docs for AD7606 ADC iio: adc: Add AD7768-1 ADC basic support dt-bindings: iio: adc: Add docs for AD7768-1 Tomasz Duszynski (6): iio: add IIO_MASSCONCENTRATION channel type iio: chemical: add support for Sensirion SPS30 sensor dt-bindings: iio: chemical: sps30: add device tree support iio: chemical: sps30: add support for self cleaning iio: chemical: sps30: allow changing self cleaning period iio: chemical: sps30: remove printk format specifier Tomer Maimon (2): dt-binding: iio: add NPCM ADC documentation iio: adc: add NPCM ADC driver YueHaibing (1): iio: imu: st_lsm6dsx: remove set but not used variable '' mario tesi (1): iio:st_pressure:initial lps22hh sensor support Documentation/ABI/testing/sysfs-bus-iio | 21 +- Documentation/ABI/testing/sysfs-bus-iio-sps30 | 28 + .../devicetree/bindings/iio/accel/mma8452.txt | 4 + .../devicetree/bindings/iio/adc/adi,ad7606.txt | 65 +++ .../devicetree/bindings/iio/adc/adi,ad7768-1.txt | 41 ++ .../bindings/iio/adc/amlogic,meson-saradc.txt | 4 + .../bindings/iio/adc/nuvoton,npcm-adc.txt | 35 ++ .../devicetree/bindings/iio/adc/ti-ads124s08.txt | 25 + .../devicetree/bindings/iio/chemical/bme680.txt | 11 + .../bindings/iio/chemical/sensirion,sgp30.txt | 15 + .../bindings/iio/chemical/sensirion,sps30.txt | 12 + .../bindings/iio/impedance-analyzer/ad5933.txt | 26 + .../devicetree/bindings/iio/imu/inv_mpu6050.txt | 1 + .../devicetree/bindings/iio/light/max44009.txt | 24 + .../devicetree/bindings/iio/st-sensors.txt | 1 + MAINTAINERS | 16 + drivers/iio/accel/mma8452.c | 105 +++- drivers/iio/accel/st_accel_core.c | 171 +++++- drivers/iio/adc/Kconfig | 60 +++ drivers/iio/adc/Makefile | 6 + drivers/{staging => }/iio/adc/ad7606.c | 272 +++++----- drivers/{staging => }/iio/adc/ad7606.h | 17 +- drivers/{staging => }/iio/adc/ad7606_par.c | 46 +- drivers/{staging => }/iio/adc/ad7606_spi.c | 35 +- drivers/iio/adc/ad7768-1.c | 459 ++++++++++++++++ drivers/iio/adc/meson_saradc.c | 33 ++ drivers/iio/adc/npcm_adc.c | 335 ++++++++++++ drivers/iio/adc/ti-ads124s08.c | 376 +++++++++++++ drivers/iio/adc/xilinx-xadc-core.c | 4 +- drivers/iio/chemical/Kconfig | 11 + drivers/iio/chemical/Makefile | 2 + drivers/iio/chemical/bme680_i2c.c | 7 + drivers/iio/chemical/bme680_spi.c | 8 + drivers/iio/chemical/sgp30.c | 591 +++++++++++++++++++++ drivers/iio/chemical/sps30.c | 545 +++++++++++++++++++ drivers/iio/dac/Kconfig | 6 +- drivers/iio/dac/ad5686-spi.c | 7 +- drivers/iio/dac/ad5686.c | 42 +- drivers/iio/dac/ad5686.h | 2 + drivers/iio/frequency/ad9523.c | 7 +- drivers/iio/imu/inv_mpu6050/Kconfig | 8 +- drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 31 ++ drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c | 6 + drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h | 8 + drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c | 12 +- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c | 2 - drivers/iio/industrialio-core.c | 5 + drivers/iio/light/Kconfig | 10 + drivers/iio/light/Makefile | 1 + drivers/iio/light/isl29018.c | 46 +- drivers/iio/light/max44009.c | 555 +++++++++++++++++++ drivers/iio/magnetometer/mag3110.c | 94 +++- drivers/iio/pressure/Kconfig | 2 +- drivers/iio/pressure/st_pressure.h | 2 + drivers/iio/pressure/st_pressure_core.c | 69 +++ drivers/iio/pressure/st_pressure_i2c.c | 5 + drivers/iio/pressure/st_pressure_spi.c | 5 + drivers/staging/iio/adc/Kconfig | 34 -- drivers/staging/iio/adc/Makefile | 4 - drivers/staging/iio/adc/ad7280a.c | 243 ++++++--- drivers/staging/iio/adc/ad7816.c | 7 +- drivers/staging/iio/addac/adt7316-i2c.c | 6 +- drivers/staging/iio/addac/adt7316-spi.c | 4 +- drivers/staging/iio/addac/adt7316.c | 143 ++--- drivers/staging/iio/cdc/Kconfig | 10 - drivers/staging/iio/cdc/Makefile | 1 - drivers/staging/iio/cdc/ad7152.c | 552 ------------------- drivers/staging/iio/frequency/ad9834.c | 54 +- drivers/staging/iio/frequency/ad9834.h | 28 - drivers/staging/iio/impedance-analyzer/ad5933.c | 57 +- include/linux/iio/common/st_sensors.h | 1 + include/uapi/linux/iio/types.h | 7 + tools/iio/iio_event_monitor.c | 14 + 73 files changed, 4431 insertions(+), 1071 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-sps30 create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7606.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/nuvoton,npcm-adc.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/ti-ads124s08.txt create mode 100644 Documentation/devicetree/bindings/iio/chemical/bme680.txt create mode 100644 Documentation/devicetree/bindings/iio/chemical/sensirion,sgp30.txt create mode 100644 Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.txt create mode 100644 Documentation/devicetree/bindings/iio/impedance-analyzer/ad5933.txt create mode 100644 Documentation/devicetree/bindings/iio/light/max44009.txt rename drivers/{staging => }/iio/adc/ad7606.c (73%) rename drivers/{staging => }/iio/adc/ad7606.h (88%) rename drivers/{staging => }/iio/adc/ad7606_par.c (75%) rename drivers/{staging => }/iio/adc/ad7606_spi.c (67%) create mode 100644 drivers/iio/adc/ad7768-1.c create mode 100644 drivers/iio/adc/npcm_adc.c create mode 100644 drivers/iio/adc/ti-ads124s08.c create mode 100644 drivers/iio/chemical/sgp30.c create mode 100644 drivers/iio/chemical/sps30.c create mode 100644 drivers/iio/light/max44009.c delete mode 100644 drivers/staging/iio/cdc/ad7152.c