[v2,04/14] irqchip: pruss: Add a PRUSS irqchip driver for PRUSS interrupts

Message ID	1549290167-876-5-git-send-email-rogerq@ti.com (mailing list archive)
State	New, archived
Headers	show Return-Path: <linux-omap-owner@kernel.org> From: Roger Quadros <rogerq@ti.com> To: <tony@atomide.com>, <ohad@wizery.com>, <bjorn.andersson@linaro.org> CC: <s-anna@ti.com>, <david@lechnology.com>, <nsekhar@ti.com>, <t-kristo@ti.com>, <nsaulnier@ti.com>, <jreeder@ti.com>, <m-karicheri2@ti.com>, <woods.technical@gmail.com>, <linux-omap@vger.kernel.org>, <linux-remoteproc@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>, <rogerq@ti.com>, "Andrew F. Davis" <afd@ti.com>, Thomas Gleixner <tglx@linutronix.de>, Jason Cooper <jason@lakedaemon.net>, Marc Zyngier <marc.zyngier@arm.com> Subject: [PATCH v2 04/14] irqchip: pruss: Add a PRUSS irqchip driver for PRUSS interrupts Date: Mon, 4 Feb 2019 16:22:37 +0200 Message-ID: <1549290167-876-5-git-send-email-rogerq@ti.com> In-Reply-To: <1549290167-876-1-git-send-email-rogerq@ti.com> References: <1549290167-876-1-git-send-email-rogerq@ti.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-omap-owner@vger.kernel.org Precedence: bulk
Series	Add support for TI PRU ICSS \| expand [v2,00/14] Add support for TI PRU ICSS [v2,01/14] dt-bindings: remoteproc: Add TI PRUSS bindings [v2,02/14] soc: ti: pruss: Add a platform driver for PRUSS in TI SoCs [v2,03/14] dt-binding: irqchip: Add pruss-intc-irq driver for PRUSS interrupts [v2,04/14] irqchip: pruss: Add a PRUSS irqchip driver for PRUSS interrupts [v2,05/14] remoteproc: add map parameter to da_to_va [v2,06/14] remoteproc: add page lookup for TI PRU to ELF loader [v2,07/14] remoteproc: Add a rproc_set_firmware() API [v2,08/14] remoteproc: Add support to handle device specific resource types [v2,09/14] dt-binding: remoteproc: Add binding doc for PRU Cores in the PRU-ICSS [v2,10/14] remoteproc/pru: Add PRU remoteproc driver [v2,11/14] remoteproc/pru: Add pru_rproc_set_ctable() and pru_rproc_set_gpimode() [v2,12/14] remoteproc/pru: Add support for virtio rpmsg stack [v2,13/14] rpmsg: virtio_rpmsg_bus: move back rpmsg_hdr into a public header [v2,14/14] rpmsg: pru: add a PRU RPMsg driver

diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile index c93713d..e309101 100644 --- a/drivers/irqchip/Makefile +++ b/drivers/irqchip/Makefile @@ -94,3 +94,4 @@ obj-$(CONFIG_CSKY_APB_INTC) += irq-csky-apb-intc.o obj-$(CONFIG_SIFIVE_PLIC) += irq-sifive-plic.o obj-$(CONFIG_IMX_IRQSTEER) += irq-imx-irqsteer.o obj-$(CONFIG_MADERA_IRQ) += irq-madera.o +obj-$(CONFIG_TI_PRUSS) += irq-pruss-intc.o diff --git a/drivers/irqchip/irq-pruss-intc.c b/drivers/irqchip/irq-pruss-intc.c new file mode 100644 index 0000000..0288535 --- /dev/null +++ b/drivers/irqchip/irq-pruss-intc.c @@ -0,0 +1,630 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * PRU-ICSS INTC IRQChip driver for various TI SoCs + * + * Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/ + * Andrew F. Davis <afd@ti.com> + * Suman Anna <s-anna@ti.com> + */ + +#include <linux/irq.h> +#include <linux/irqchip/chained_irq.h> +#include <linux/irqchip/irq-pruss-intc.h> +#include <linux/irqdomain.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> + +/* + * Number of host interrupts reaching the main MPU sub-system. Note that this + * is not the same as the total number of host interrupts supported by the PRUSS + * INTC instance + */ +#define MAX_HOST_NUM_IRQS 8 + +/* minimum starting host interrupt number for MPU */ +#define MIN_PRU_HOST_INT 2 + +/* maximum number of host interrupts */ +#define MAX_PRU_HOST_INT 10 + +/* PRU_ICSS_INTC registers */ +#define PRU_INTC_REVID 0x0000 +#define PRU_INTC_CR 0x0004 +#define PRU_INTC_GER 0x0010 +#define PRU_INTC_GNLR 0x001C +#define PRU_INTC_SISR 0x0020 +#define PRU_INTC_SICR 0x0024 +#define PRU_INTC_EISR 0x0028 +#define PRU_INTC_EICR 0x002C +#define PRU_INTC_HIEISR 0x0034 +#define PRU_INTC_HIDISR 0x0038 +#define PRU_INTC_GPIR 0x0080 +#define PRU_INTC_SRSR0 0x0200 +#define PRU_INTC_SRSR1 0x0204 +#define PRU_INTC_SECR0 0x0280 +#define PRU_INTC_SECR1 0x0284 +#define PRU_INTC_ESR0 0x0300 +#define PRU_INTC_ESR1 0x0304 +#define PRU_INTC_ECR0 0x0380 +#define PRU_INTC_ECR1 0x0384 +#define PRU_INTC_CMR(x) (0x0400 + (x) * 4) +#define PRU_INTC_HMR(x) (0x0800 + (x) * 4) +#define PRU_INTC_HIPIR(x) (0x0900 + (x) * 4) +#define PRU_INTC_SIPR0 0x0D00 +#define PRU_INTC_SIPR1 0x0D04 +#define PRU_INTC_SITR0 0x0D80 +#define PRU_INTC_SITR1 0x0D84 +#define PRU_INTC_HINLR(x) (0x1100 + (x) * 4) +#define PRU_INTC_HIER 0x1500 + +/* HIPIR register bit-fields */ +#define INTC_HIPIR_NONE_HINT 0x80000000 + +static const char * const irq_names[] = { + "host2", "host3", "host4", "host5", "host6", "host7", "host8", "host9", +}; + +/** + * struct pruss_intc_match_data - match data to handle SoC variations + * @no_host7_intr: flag denoting the absence of host7 interrupt into MPU + */ +struct pruss_intc_match_data { + bool no_host7_intr; +}; + +/** + * struct pruss_intc - PRUSS interrupt controller structure + * @irqs: kernel irq numbers corresponding to PRUSS host interrupts + * @mem: base virtual address of INTC register space + * @irqchip: irq chip for this interrupt controller + * @domain: irq domain for this interrupt controller + * @config_map: stored INTC configuration mapping data + * @lock: mutex to serialize access to INTCa + * @host_mask: indicate which HOST IRQs are enabled + */ +struct pruss_intc { + unsigned int irqs[MAX_HOST_NUM_IRQS]; + void __iomem *base; + struct irq_chip *irqchip; + struct irq_domain *domain; + struct pruss_intc_config config_map; + struct mutex lock; /* PRUSS INTC lock */ + u32 host_mask; +}; + +static inline u32 pruss_intc_read_reg(struct pruss_intc *intc, unsigned int reg) +{ + return readl_relaxed(intc->base + reg); +} + +static inline void pruss_intc_write_reg(struct pruss_intc *intc, + unsigned int reg, u32 val) +{ + writel_relaxed(val, intc->base + reg); +} + +static int pruss_intc_check_write(struct pruss_intc *intc, unsigned int reg, + unsigned int sysevent) +{ + if (!intc) + return -EINVAL; + + if (sysevent >= MAX_PRU_SYS_EVENTS) + return -EINVAL; + + pruss_intc_write_reg(intc, reg, sysevent); + + return 0; +} + +static struct pruss_intc *dev_to_intc(struct device *user_dev) +{ + struct device_node *np; + struct platform_device *pdev; + struct pruss_intc *intc; + + np = of_irq_find_parent(user_dev->of_node); + if (!np) + return ERR_PTR(-ENODEV); + + pdev = of_find_device_by_node(np); + if (!pdev) + return ERR_PTR(-EPROBE_DEFER); /* Not probed yet? */ + + intc = platform_get_drvdata(pdev); + if (!intc) + return ERR_PTR(-EINVAL); + + return intc; +} + +/** + * pruss_intc_configure() - configure the PRUSS INTC + * @dev: device + * @intc_config: PRU core-specific INTC configuration + * + * Configures the PRUSS INTC with the provided configuration from + * a PRU core. Any existing event to channel mappings or channel to + * host interrupt mappings are checked to make sure there are no + * conflicting configuration between both the PRU cores. The function + * is intended to be used only by the PRU remoteproc driver. + * + * Returns 0 on success, or a suitable error code otherwise + */ +int pruss_intc_configure(struct device *dev, + struct pruss_intc_config *intc_config) +{ + struct pruss_intc *intc; + int i, idx, ret; + s8 ch, host; + u64 sysevt_mask = 0; + u32 ch_mask = 0; + u32 host_mask = 0; + u32 val; + + intc = dev_to_intc(dev); + if (IS_ERR(intc)) + return PTR_ERR(intc); + + mutex_lock(&intc->lock); + + /* + * configure channel map registers - each register holds map info + * for 4 events, with each event occupying the lower nibble in + * a register byte address in little-endian fashion + */ + for (i = 0; i < ARRAY_SIZE(intc_config->sysev_to_ch); i++) { + ch = intc_config->sysev_to_ch[i]; + if (ch < 0) + continue; + + /* check if sysevent already assigned */ + if (intc->config_map.sysev_to_ch[i] != -1) { + dev_err(dev, "event %d (req. channel %d) already assigned to channel %d\n", + i, ch, intc->config_map.sysev_to_ch[i]); + ret = -EEXIST; + goto unlock; + } + + intc->config_map.sysev_to_ch[i] = ch; + + idx = i / 4; + val = pruss_intc_read_reg(intc, PRU_INTC_CMR(idx)); + val |= ch << ((i & 3) * 8); + pruss_intc_write_reg(intc, PRU_INTC_CMR(idx), val); + sysevt_mask |= BIT_ULL(i); + ch_mask |= BIT(ch); + + dev_dbg(dev, "SYSEV%d -> CH%d (CMR%d 0x%08x)\n", i, ch, idx, + pruss_intc_read_reg(intc, PRU_INTC_CMR(idx))); + } + + /* + * set host map registers - each register holds map info for + * 4 channels, with each channel occupying the lower nibble in + * a register byte address in little-endian fashion + */ + for (i = 0; i < ARRAY_SIZE(intc_config->ch_to_host); i++) { + host = intc_config->ch_to_host[i]; + if (host < 0) + continue; + + /* check if channel already assigned */ + if (intc->config_map.ch_to_host[i] != -1) { + dev_err(dev, "channel %d (req. intr_no %d) already assigned to intr_no %d\n", + i, host, intc->config_map.ch_to_host[i]); + ret = -EEXIST; + goto unlock; + } + + /* check if host intr is already in use by other PRU */ + if (intc->host_mask & (1U << host)) { + dev_err(dev, "%s: host intr %d already in use\n", + __func__, host); + ret = -EEXIST; + goto unlock; + } + + intc->config_map.ch_to_host[i] = host; + + idx = i / 4; + + val = pruss_intc_read_reg(intc, PRU_INTC_HMR(idx)); + val |= host << ((i & 3) * 8); + pruss_intc_write_reg(intc, PRU_INTC_HMR(idx), val); + + ch_mask |= BIT(i); + host_mask |= BIT(host); + + dev_dbg(dev, "CH%d -> HOST%d (HMR%d 0x%08x)\n", i, host, idx, + pruss_intc_read_reg(intc, PRU_INTC_HMR(idx))); + } + + dev_info(dev, "intc: config: system_events = 0x%016llx intr_channels = 0x%08x host_intr = 0x%08x\n", + sysevt_mask, ch_mask, host_mask); + + /* enable system events, writing 0 has no-effect */ + pruss_intc_write_reg(intc, PRU_INTC_ESR0, lower_32_bits(sysevt_mask)); + pruss_intc_write_reg(intc, PRU_INTC_SECR0, lower_32_bits(sysevt_mask)); + pruss_intc_write_reg(intc, PRU_INTC_ESR1, upper_32_bits(sysevt_mask)); + pruss_intc_write_reg(intc, PRU_INTC_SECR1, upper_32_bits(sysevt_mask)); + + /* enable host interrupts */ + for (i = 0; i < MAX_PRU_HOST_INT; i++) { + if (host_mask & BIT(i)) + pruss_intc_write_reg(intc, PRU_INTC_HIEISR, i); + } + + /* global interrupt enable */ + pruss_intc_write_reg(intc, PRU_INTC_GER, 1); + + intc->host_mask |= host_mask; + + mutex_unlock(&intc->lock); + return 0; + +unlock: + mutex_unlock(&intc->lock); + return ret; +} +EXPORT_SYMBOL_GPL(pruss_intc_configure); + +/** + * pruss_intc_unconfigure() - unconfigure the PRUSS INTC + * @dev: device + * @intc_config: PRU core specific INTC configuration + * + * Undo whatever was done in pruss_intc_configure() for a PRU core. + * It should be sufficient to just mark the resources free in the + * global map and disable the host interrupts and sysevents. + */ +int pruss_intc_unconfigure(struct device *dev, + struct pruss_intc_config *intc_config) +{ + struct pruss_intc *intc; + int i; + s8 ch, host; + u64 sysevt_mask = 0; + u32 host_mask = 0; + + intc = dev_to_intc(dev); + if (IS_ERR(intc)) + return PTR_ERR(intc); + + mutex_lock(&intc->lock); + + for (i = 0; i < ARRAY_SIZE(intc_config->sysev_to_ch); i++) { + ch = intc_config->sysev_to_ch[i]; + if (ch < 0) + continue; + + /* mark sysevent free in global map */ + intc->config_map.sysev_to_ch[i] = -1; + sysevt_mask |= BIT_ULL(i); + } + + for (i = 0; i < ARRAY_SIZE(intc_config->ch_to_host); i++) { + host = intc_config->ch_to_host[i]; + if (host < 0) + continue; + + /* mark channel free in global map */ + intc->config_map.ch_to_host[i] = -1; + host_mask |= BIT(host); + } + + dev_info(dev, "intc: unconfig: system_events = 0x%016llx host_intr = 0x%08x\n", + sysevt_mask, host_mask); + + /* disable system events, writing 0 has no-effect */ + pruss_intc_write_reg(intc, PRU_INTC_ECR0, lower_32_bits(sysevt_mask)); + pruss_intc_write_reg(intc, PRU_INTC_ECR1, upper_32_bits(sysevt_mask)); + /* clear any pending status */ + pruss_intc_write_reg(intc, PRU_INTC_SECR0, lower_32_bits(sysevt_mask)); + pruss_intc_write_reg(intc, PRU_INTC_SECR1, upper_32_bits(sysevt_mask)); + + /* disable host interrupts */ + for (i = 0; i < MAX_PRU_HOST_INT; i++) { + if (host_mask & BIT(i)) + pruss_intc_write_reg(intc, PRU_INTC_HIDISR, i); + } + + intc->host_mask &= ~host_mask; + mutex_unlock(&intc->lock); + + return 0; +} +EXPORT_SYMBOL_GPL(pruss_intc_unconfigure); + +static void pruss_intc_init(struct pruss_intc *intc) +{ + int i; + + /* configure polarity to active high for all system interrupts */ + pruss_intc_write_reg(intc, PRU_INTC_SIPR0, 0xffffffff); + pruss_intc_write_reg(intc, PRU_INTC_SIPR1, 0xffffffff); + + /* configure type to pulse interrupt for all system interrupts */ + pruss_intc_write_reg(intc, PRU_INTC_SITR0, 0); + pruss_intc_write_reg(intc, PRU_INTC_SITR1, 0); + + /* clear all 16 interrupt channel map registers */ + for (i = 0; i < 16; i++) + pruss_intc_write_reg(intc, PRU_INTC_CMR(i), 0); + + /* clear all 3 host interrupt map registers */ + for (i = 0; i < 3; i++) + pruss_intc_write_reg(intc, PRU_INTC_HMR(i), 0); +} + +static void pruss_intc_irq_ack(struct irq_data *data) +{ + struct pruss_intc *intc = irq_data_get_irq_chip_data(data); + unsigned int hwirq = data->hwirq; + + pruss_intc_check_write(intc, PRU_INTC_SICR, hwirq); +} + +static void pruss_intc_irq_mask(struct irq_data *data) +{ + struct pruss_intc *intc = irq_data_get_irq_chip_data(data); + unsigned int hwirq = data->hwirq; + + pruss_intc_check_write(intc, PRU_INTC_EICR, hwirq); +} + +static void pruss_intc_irq_unmask(struct irq_data *data) +{ + struct pruss_intc *intc = irq_data_get_irq_chip_data(data); + unsigned int hwirq = data->hwirq; + + pruss_intc_check_write(intc, PRU_INTC_EISR, hwirq); +} + +static int pruss_intc_irq_retrigger(struct irq_data *data) +{ + struct pruss_intc *intc = irq_data_get_irq_chip_data(data); + unsigned int hwirq = data->hwirq; + + return pruss_intc_check_write(intc, PRU_INTC_SISR, hwirq); +} + +static int pruss_intc_irq_reqres(struct irq_data *data) +{ + if (!try_module_get(THIS_MODULE)) + return -ENODEV; + + return 0; +} + +static void pruss_intc_irq_relres(struct irq_data *data) +{ + module_put(THIS_MODULE); +} + +/** + * pruss_intc_trigger() - trigger a PRU system event + * @irq: linux IRQ number associated with a PRU system event + * + * Trigger an interrupt by signalling a specific PRU system event. + * This can be used by PRUSS client users to raise/send an event to + * a PRU or any other core that is listening on the host interrupt + * mapped to that specific PRU system event. The @irq variable is the + * Linux IRQ number associated with a specific PRU system event that + * a client user/application uses. The interrupt mappings for this is + * provided by the PRUSS INTC irqchip instance. + * + * Returns 0 on success, or an error value upon failure. + */ +int pruss_intc_trigger(unsigned int irq) +{ + struct irq_desc *desc; + + if (irq <= 0) + return -EINVAL; + + desc = irq_to_desc(irq); + if (!desc) + return -EINVAL; + + pruss_intc_irq_retrigger(&desc->irq_data); + + return 0; +} +EXPORT_SYMBOL_GPL(pruss_intc_trigger); + +static int pruss_intc_irq_domain_map(struct irq_domain *d, unsigned int virq, + irq_hw_number_t hw) +{ + struct pruss_intc *intc = d->host_data; + + irq_set_chip_data(virq, intc); + irq_set_chip_and_handler(virq, intc->irqchip, handle_level_irq); + + return 0; +} + +static void pruss_intc_irq_domain_unmap(struct irq_domain *d, unsigned int virq) +{ + irq_set_chip_and_handler(virq, NULL, NULL); + irq_set_chip_data(virq, NULL); +} + +static const struct irq_domain_ops pruss_intc_irq_domain_ops = { + .xlate = irq_domain_xlate_onecell, + .map = pruss_intc_irq_domain_map, + .unmap = pruss_intc_irq_domain_unmap, +}; + +static void pruss_intc_irq_handler(struct irq_desc *desc) +{ + unsigned int irq = irq_desc_get_irq(desc); + struct irq_chip *chip = irq_desc_get_chip(desc); + struct pruss_intc *intc = irq_get_handler_data(irq); + u32 hipir; + unsigned int virq; + int i, hwirq; + + chained_irq_enter(chip, desc); + + /* find our host irq number */ + for (i = 0; i < MAX_HOST_NUM_IRQS; i++) + if (intc->irqs[i] == irq) + break; + if (i == MAX_HOST_NUM_IRQS) + goto err; + + i += MIN_PRU_HOST_INT; + + /* get highest priority pending PRUSS system event */ + hipir = pruss_intc_read_reg(intc, PRU_INTC_HIPIR(i)); + while (!(hipir & BIT(31))) { + hwirq = hipir & GENMASK(9, 0); + virq = irq_linear_revmap(intc->domain, hwirq); + + /* + * XXX: manually ACK any system events that do not have a + * handler mapped yet + */ + if (unlikely(!virq)) + pruss_intc_check_write(intc, PRU_INTC_SICR, hwirq); + else + generic_handle_irq(virq); + + /* get next system event */ + hipir = pruss_intc_read_reg(intc, PRU_INTC_HIPIR(i)); + } +err: + chained_irq_exit(chip, desc); +} + +static int pruss_intc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct pruss_intc *intc; + struct resource *res; + struct irq_chip *irqchip; + int i, irq; + const struct pruss_intc_match_data *data; + bool skip_host7; + + data = of_device_get_match_data(dev); + skip_host7 = data ? data->no_host7_intr : false; + + intc = devm_kzalloc(dev, sizeof(*intc), GFP_KERNEL); + if (!intc) + return -ENOMEM; + platform_set_drvdata(pdev, intc); + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "intc"); + intc->base = devm_ioremap_resource(dev, res); + if (IS_ERR(intc->base)) { + dev_err(dev, "failed to parse and map intc memory resource\n"); + return PTR_ERR(intc->base); + } + + mutex_init(&intc->lock); + + for (i = 0; i < ARRAY_SIZE(intc->config_map.sysev_to_ch); i++) + intc->config_map.sysev_to_ch[i] = -1; + + for (i = 0; i < ARRAY_SIZE(intc->config_map.ch_to_host); i++) + intc->config_map.ch_to_host[i] = -1; + + pruss_intc_init(intc); + + irqchip = devm_kzalloc(dev, sizeof(*irqchip), GFP_KERNEL); + if (!irqchip) + return -ENOMEM; + + irqchip->irq_ack = pruss_intc_irq_ack; + irqchip->irq_mask = pruss_intc_irq_mask; + irqchip->irq_unmask = pruss_intc_irq_unmask; + irqchip->irq_retrigger = pruss_intc_irq_retrigger; + irqchip->irq_request_resources = pruss_intc_irq_reqres; + irqchip->irq_release_resources = pruss_intc_irq_relres; + irqchip->name = dev_name(dev); + intc->irqchip = irqchip; + + /* always 64 events */ + intc->domain = irq_domain_add_linear(dev->of_node, MAX_PRU_SYS_EVENTS, + &pruss_intc_irq_domain_ops, intc); + if (!intc->domain) + return -ENOMEM; + + for (i = 0; i < MAX_HOST_NUM_IRQS; i++) { + irq = platform_get_irq_byname(pdev, irq_names[i]); + if (irq < 0) { + if (!strcmp(irq_names[i], "host7") && !!skip_host7) + continue; + + dev_err(dev->parent, "platform_get_irq_byname failed for %s : %d\n", + irq_names[i], irq); + goto fail_irq; + } + + intc->irqs[i] = irq; + irq_set_handler_data(irq, intc); + irq_set_chained_handler(irq, pruss_intc_irq_handler); + } + + return 0; + +fail_irq: + irq_domain_remove(intc->domain); + return irq; +} + +static int pruss_intc_remove(struct platform_device *pdev) +{ + struct pruss_intc *intc = platform_get_drvdata(pdev); + unsigned int hwirq; + + if (intc->domain) { + for (hwirq = 0; hwirq < MAX_PRU_SYS_EVENTS; hwirq++) + irq_dispose_mapping(irq_find_mapping(intc->domain, + hwirq)); + irq_domain_remove(intc->domain); + } + + return 0; +} + +static const struct pruss_intc_match_data am437x_pruss_intc_data = { + .no_host7_intr = true, +}; + +static const struct of_device_id pruss_intc_of_match[] = { + { + .compatible = "ti,am3356-pruss-intc", + .data = NULL, + }, + { + .compatible = "ti,am4376-pruss-intc", + .data = &am437x_pruss_intc_data, + }, + { + .compatible = "ti,am5728-pruss-intc", + .data = NULL, + }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, pruss_intc_of_match); + +static struct platform_driver pruss_intc_driver = { + .driver = { + .name = "pruss-intc", + .of_match_table = pruss_intc_of_match, + }, + .probe = pruss_intc_probe, + .remove = pruss_intc_remove, +}; +module_platform_driver(pruss_intc_driver); + +MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>"); +MODULE_AUTHOR("Suman Anna <s-anna@ti.com>"); +MODULE_DESCRIPTION("PRU-ICSS INTC Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/irqchip/irq-pruss-intc.h b/include/linux/irqchip/irq-pruss-intc.h new file mode 100644 index 0000000..4538a0b --- /dev/null +++ b/include/linux/irqchip/irq-pruss-intc.h @@ -0,0 +1,94 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/** + * irq-pruss-intc.h - PRU-ICSS INTC management + * + * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com + */ + +#ifndef __INCLUDE_LINUX_IRQCHIP_IRQ_PRUSS_INTC_H +#define __INCLUDE_LINUX_IRQCHIP_IRQ_PRUSS_INTC_H + +/* maximum number of system events */ +#define MAX_PRU_SYS_EVENTS 64 + +/* maximum number of interrupt channels */ +#define MAX_PRU_CHANNELS 10 + +/** + * struct pruss_intc_config - INTC configuration info + * @sysev_to_ch: system events to channel mapping information + * @ch_to_host: interrupt channel to host interrupt information + */ +struct pruss_intc_config { + s8 sysev_to_ch[MAX_PRU_SYS_EVENTS]; + s8 ch_to_host[MAX_PRU_CHANNELS]; +}; + +#if IS_ENABLED(CONFIG_TI_PRUSS) + +/** + * pruss_intc_configure() - configure the PRUSS INTC + * @dev: device + * @intc_config: PRU core-specific INTC configuration + * + * Configures the PRUSS INTC with the provided configuration from + * a PRU core. Any existing event to channel mappings or channel to + * host interrupt mappings are checked to make sure there are no + * conflicting configuration between both the PRU cores. The function + * is intended to be used only by the PRU remoteproc driver. + * + * Returns 0 on success, or a suitable error code otherwise + */ +int pruss_intc_configure(struct device *dev, + struct pruss_intc_config *intc_config); + +/** + * pruss_intc_unconfigure() - unconfigure the PRUSS INTC + * @dev: device + * @intc_config: PRU core specific INTC configuration + * + * Undo whatever was done in pruss_intc_configure() for a PRU core. + * It should be sufficient to just mark the resources free in the + * global map and disable the host interrupts and sysevents. + */ +int pruss_intc_unconfigure(struct device *dev, + struct pruss_intc_config *intc_config); +/** + * pruss_intc_trigger() - trigger a PRU system event + * @irq: linux IRQ number associated with a PRU system event + * + * Trigger an interrupt by signalling a specific PRU system event. + * This can be used by PRUSS client users to raise/send an event to + * a PRU or any other core that is listening on the host interrupt + * mapped to that specific PRU system event. The @irq variable is the + * Linux IRQ number associated with a specific PRU system event that + * a client user/application uses. The interrupt mappings for this is + * provided by the PRUSS INTC irqchip instance. + * + * Returns 0 on success, or an error value upon failure. + */ +int pruss_intc_trigger(unsigned int irq); + +#else + +static inline int pruss_intc_configure(struct device *dev, + struct pruss_intc_config *intc_config) +{ + return -ENOTSUPP; +} + +static inline int pruss_intc_unconfigure(struct device *dev, + struct pruss_intc_config *intc_config) +{ + return -ENOTSUPP; +} + +static inline int pruss_intc_trigger(unsigned int irq) +{ + return -ENOTSUPP; +} + +#endif /* CONFIG_TI_PRUSS */ + +#endif /* __INCLUDE_LINUX_IRQCHIP_IRQ_OMAP_INTC_H */ +

[v2,04/14] irqchip: pruss: Add a PRUSS irqchip driver for PRUSS interrupts

Commit Message

Comments

Patch