diff mbox series

ASoC: stm32: sai: add missing put_device()

Message ID HK0PR02MB36348FCAF73000463738C017B26A0@HK0PR02MB3634.apcprd02.prod.outlook.com (mailing list archive)
State Accepted
Commit 1c3816a194870e7a6622345dab7fb56c7d708613
Headers show
Series ASoC: stm32: sai: add missing put_device() | expand

Commit Message

Wen Yang Feb. 9, 2019, 10:41 a.m. UTC
The of_find_device_by_node() takes a reference to the underlying device
structure, we should release that reference.

Fixes: 7dd0d835582f ("ASoC: stm32: sai: simplify sync modes management")
Signed-off-by: Wen Yang <yellowriver2010@hotmail.com>
---
 sound/soc/stm/stm32_sai.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

Comments

Olivier MOYSAN Feb. 11, 2019, 3:09 p.m. UTC | #1
Hi Wen,

On 2/9/19 11:41 AM, Wen Yang wrote:
> The of_find_device_by_node() takes a reference to the underlying device
> structure, we should release that reference.
> 
> Fixes: 7dd0d835582f ("ASoC: stm32: sai: simplify sync modes management")
> Signed-off-by: Wen Yang <yellowriver2010@hotmail.com>
> ---
>   sound/soc/stm/stm32_sai.c | 11 ++++++++---
>   1 file changed, 8 insertions(+), 3 deletions(-)
> 
> diff --git a/sound/soc/stm/stm32_sai.c b/sound/soc/stm/stm32_sai.c
> index bcb35ca..14c9591 100644
> --- a/sound/soc/stm/stm32_sai.c
> +++ b/sound/soc/stm/stm32_sai.c
> @@ -112,16 +112,21 @@ static int stm32_sai_set_sync(struct stm32_sai_data *sai_client,

goto error also in previous test
	if (!pdev) {
		...
		ret = -ENODEV;
		goto error;
	}

>   	if (!sai_provider) {
>   		dev_err(&sai_client->pdev->dev,
>   			"SAI sync provider data not found\n");
> -		return -EINVAL;
> +		ret = -EINVAL;
> +		goto out_put_dev;
>   	}
>   
>   	/* Configure sync client */
>   	ret = stm32_sai_sync_conf_client(sai_client, synci);
>   	if (ret < 0)
> -		return ret;
> +		goto out_put_dev;
>   
>   	/* Configure sync provider */
> -	return stm32_sai_sync_conf_provider(sai_provider, synco);
> +	ret = stm32_sai_sync_conf_provider(sai_provider, synco);
> +
> +out_put_dev:
> +	put_device(&pdev->dev);
> +	return ret;

Here I propose:
error:
	of_node_put(np_provider);
	return ret;

>   }
>   
>   static int stm32_sai_probe(struct platform_device *pdev)
> 

Thanks for your patch. Please, see my comments above.

Regards
Olivier
Wen Yang Feb. 13, 2019, 2:41 p.m. UTC | #2
From: Olivier MOYSAN <olivier.moysan@st.com>
Sent: 11 February 2019 15:09
To: Wen Yang; Arnaud POULIQUEN; Liam Girdwood; Mark Brown; Jaroslav Kysela; Takashi Iwai; Maxime Coquelin; Alexandre TORGUE
Cc: alsa-devel@alsa-project.org; linux-stm32@st-md-mailman.stormreply.com; linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org
Subject: Re: [PATCH] ASoC: stm32: sai: add missing put_device()

>On 2/9/19 11:41 AM, Wen Yang wrote:
>> The of_find_device_by_node() takes a reference to the underlying device
>> structure, we should release that reference.
>>
>> Fixes: 7dd0d835582f ("ASoC: stm32: sai: simplify sync modes management")
>> Signed-off-by: Wen Yang <yellowriver2010@hotmail.com>
>> ---
>>   sound/soc/stm/stm32_sai.c | 11 ++++++++---
>>   1 file changed, 8 insertions(+), 3 deletions(-)
>>
>> diff --git a/sound/soc/stm/stm32_sai.c b/sound/soc/stm/stm32_sai.c
>> index bcb35ca..14c9591 100644
>> --- a/sound/soc/stm/stm32_sai.c
>> +++ b/sound/soc/stm/stm32_sai.c
>> @@ -112,16 +112,21 @@ static int stm32_sai_set_sync(struct stm32_sai_data *sai_client,
>
>goto error also in previous test
>       if (!pdev) {
>               ...
>               ret = -ENODEV;
>                goto error;
>        }
>
>>       if (!sai_provider) {
>>               dev_err(&sai_client->pdev->dev,
>>                       "SAI sync provider data not found\n");
>> -             return -EINVAL;
>> +             ret = -EINVAL;
>> +             goto out_put_dev;
>>       }
>>
>>       /* Configure sync client */
>>       ret = stm32_sai_sync_conf_client(sai_client, synci);
>>       if (ret < 0)
>> -             return ret;
>> +             goto out_put_dev;
>>
>>       /* Configure sync provider */
>> -     return stm32_sai_sync_conf_provider(sai_provider, synco);
>> +     ret = stm32_sai_sync_conf_provider(sai_provider, synco);
>> +
>> +out_put_dev:
>> +     put_device(&pdev->dev);
>> +     return ret;
>
>Here I propose:
>error:
>        of_node_put(np_provider);
>        return ret;
>
>>   }
>>
>>   static int stm32_sai_probe(struct platform_device *pdev)
>>

>Thanks for your patch. Please, see my comments above.

Thanks for your comments, in this patch we only fix the problem of missing put_device().
The problem of missing of_node_put() is a bit more complicated:
For the variable np_provider(np_sync_provider):
1, it is obtained by of_get_parent(), but it is not released;
2, error code not obtained when calling sai->pdata->set_sync()

We will submit another patch to fix the failure of np_sync_provider
Thank you.

Regards
Wen
Olivier MOYSAN Feb. 14, 2019, 10:39 a.m. UTC | #3
Acked-by: Olivier Moysan <olivier.moysan@st.com>

On 2/13/19 3:41 PM, Wen Yang wrote:
> From: Olivier MOYSAN <olivier.moysan@st.com>
> Sent: 11 February 2019 15:09
> To: Wen Yang; Arnaud POULIQUEN; Liam Girdwood; Mark Brown; Jaroslav Kysela; Takashi Iwai; Maxime Coquelin; Alexandre TORGUE
> Cc: alsa-devel@alsa-project.org; linux-stm32@st-md-mailman.stormreply.com; linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org
> Subject: Re: [PATCH] ASoC: stm32: sai: add missing put_device()
> 
>> On 2/9/19 11:41 AM, Wen Yang wrote:
>>> The of_find_device_by_node() takes a reference to the underlying device
>>> structure, we should release that reference.
>>>
>>> Fixes: 7dd0d835582f ("ASoC: stm32: sai: simplify sync modes management")
>>> Signed-off-by: Wen Yang <yellowriver2010@hotmail.com>
>>> ---
>>>    sound/soc/stm/stm32_sai.c | 11 ++++++++---
>>>    1 file changed, 8 insertions(+), 3 deletions(-)
>>>
>>> diff --git a/sound/soc/stm/stm32_sai.c b/sound/soc/stm/stm32_sai.c
>>> index bcb35ca..14c9591 100644
>>> --- a/sound/soc/stm/stm32_sai.c
>>> +++ b/sound/soc/stm/stm32_sai.c
>>> @@ -112,16 +112,21 @@ static int stm32_sai_set_sync(struct stm32_sai_data *sai_client,
>>
>> goto error also in previous test
>>        if (!pdev) {
>>                ...
>>                ret = -ENODEV;
>>                 goto error;
>>         }
>>
>>>        if (!sai_provider) {
>>>                dev_err(&sai_client->pdev->dev,
>>>                        "SAI sync provider data not found\n");
>>> -             return -EINVAL;
>>> +             ret = -EINVAL;
>>> +             goto out_put_dev;
>>>        }
>>>
>>>        /* Configure sync client */
>>>        ret = stm32_sai_sync_conf_client(sai_client, synci);
>>>        if (ret < 0)
>>> -             return ret;
>>> +             goto out_put_dev;
>>>
>>>        /* Configure sync provider */
>>> -     return stm32_sai_sync_conf_provider(sai_provider, synco);
>>> +     ret = stm32_sai_sync_conf_provider(sai_provider, synco);
>>> +
>>> +out_put_dev:
>>> +     put_device(&pdev->dev);
>>> +     return ret;
>>
>> Here I propose:
>> error:
>>         of_node_put(np_provider);
>>         return ret;
>>
>>>    }
>>>
>>>    static int stm32_sai_probe(struct platform_device *pdev)
>>>
> 
>> Thanks for your patch. Please, see my comments above.
> 
> Thanks for your comments, in this patch we only fix the problem of missing put_device().
> The problem of missing of_node_put() is a bit more complicated:
> For the variable np_provider(np_sync_provider):
> 1, it is obtained by of_get_parent(), but it is not released;
> 2, error code not obtained when calling sai->pdata->set_sync()
> 

I agree, release of np_sync_provider node is missing, as well as
returned error on set_sync.
So yes, this requires a dedicated patch.
Thanks

Regards
Olivier

> We will submit another patch to fix the failure of np_sync_provider
> Thank you.
> > Regards
> Wen
> 
>
diff mbox series

Patch

diff --git a/sound/soc/stm/stm32_sai.c b/sound/soc/stm/stm32_sai.c
index bcb35ca..14c9591 100644
--- a/sound/soc/stm/stm32_sai.c
+++ b/sound/soc/stm/stm32_sai.c
@@ -112,16 +112,21 @@  static int stm32_sai_set_sync(struct stm32_sai_data *sai_client,
 	if (!sai_provider) {
 		dev_err(&sai_client->pdev->dev,
 			"SAI sync provider data not found\n");
-		return -EINVAL;
+		ret = -EINVAL;
+		goto out_put_dev;
 	}
 
 	/* Configure sync client */
 	ret = stm32_sai_sync_conf_client(sai_client, synci);
 	if (ret < 0)
-		return ret;
+		goto out_put_dev;
 
 	/* Configure sync provider */
-	return stm32_sai_sync_conf_provider(sai_provider, synco);
+	ret = stm32_sai_sync_conf_provider(sai_provider, synco);
+
+out_put_dev:
+	put_device(&pdev->dev);
+	return ret;
 }
 
 static int stm32_sai_probe(struct platform_device *pdev)