@@ -814,6 +814,13 @@ config ARCH_HAS_PRMEM
architecture specific symbol stating that the architecture provides
a back-end function for the write rare operation.
+config ARCH_HAS_PRMEM_HEADER
+ def_bool n
+ depends on ARCH_HAS_PRMEM
+ help
+ architecture specific symbol stating that the architecture provides
+ own specific header back-end for the write rare operation.
+
config PRMEM
bool "Write protect critical data that doesn't need high write speed."
depends on ARCH_HAS_PRMEM
new file mode 100644
@@ -0,0 +1,71 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * prmem.h: Header for memory protection library - generic part
+ *
+ * (C) Copyright 2018-2019 Huawei Technologies Co. Ltd.
+ * Author: Igor Stoppa <igor.stoppa@huawei.com>
+ */
+
+#ifndef _LINUX_PRMEM_H
+#define _LINUX_PRMEM_H
+
+#include <linux/set_memory.h>
+#include <linux/mutex.h>
+
+#ifndef CONFIG_PRMEM
+
+static inline void *wr_memset(void *p, int c, __kernel_size_t n)
+{
+ return memset(p, c, n);
+}
+
+static inline void *wr_memcpy(void *p, const void *q, __kernel_size_t n)
+{
+ return memcpy(p, q, n);
+}
+
+#define wr_assign(var, val) ((var) = (val))
+#define wr_rcu_assign_pointer(p, v) rcu_assign_pointer(p, v)
+
+#else
+
+#include <linux/mm.h>
+
+void *wr_memset(void *p, int c, __kernel_size_t n);
+void *wr_memcpy(void *p, const void *q, __kernel_size_t n);
+
+/**
+ * wr_assign() - sets a write-rare variable to a specified value
+ * @var: the variable to set
+ * @val: the new value
+ *
+ * Returns: the variable
+ */
+
+#define wr_assign(dst, val) ({ \
+ typeof(dst) tmp = (typeof(dst))val; \
+ \
+ wr_memcpy(&dst, &tmp, sizeof(dst)); \
+ dst; \
+})
+
+/**
+ * wr_rcu_assign_pointer() - initialize a pointer in rcu mode
+ * @p: the rcu pointer - it MUST be aligned to a machine word
+ * @v: the new value
+ *
+ * Returns the value assigned to the rcu pointer.
+ *
+ * It is provided as macro, to match rcu_assign_pointer()
+ * The rcu_assign_pointer() is implemented as equivalent of:
+ *
+ * smp_mb();
+ * WRITE_ONCE();
+ */
+#define wr_rcu_assign_pointer(p, v) ({ \
+ smp_mb(); \
+ wr_assign(p, v); \
+ p; \
+})
+#endif
+#endif
@@ -58,6 +58,7 @@ obj-$(CONFIG_SPARSEMEM) += sparse.o
obj-$(CONFIG_SPARSEMEM_VMEMMAP) += sparse-vmemmap.o
obj-$(CONFIG_SLOB) += slob.o
obj-$(CONFIG_MMU_NOTIFIER) += mmu_notifier.o
+obj-$(CONFIG_PRMEM) += prmem.o
obj-$(CONFIG_KSM) += ksm.o
obj-$(CONFIG_PAGE_POISONING) += page_poison.o
obj-$(CONFIG_SLAB) += slab.o
new file mode 100644
@@ -0,0 +1,179 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * prmem.c: Memory Protection Library
+ *
+ * (C) Copyright 2018-2019 Huawei Technologies Co. Ltd.
+ * Author: Igor Stoppa <igor.stoppa@huawei.com>
+ */
+
+#include <linux/mmu_context.h>
+#include <linux/uaccess.h>
+
+/*
+ * In case an architecture needs a different declaration of struct
+ * wr_state, it can select ARCH_HAS_PRMEM_HEADER and provide its own
+ * version, accompanied by matching __wr_enable() and __wr_disable()
+ */
+#ifdef CONFIG_ARCH_HAS_PRMEM_HEADER
+#include <asm/prmem.h>
+#else
+
+struct wr_state {
+ struct mm_struct *prev;
+};
+
+#endif
+
+
+__ro_after_init struct mm_struct *wr_mm;
+__ro_after_init unsigned long wr_base;
+
+/*
+ * Default implementation of arch-specific functionality.
+ * Each arch can override the parts that require special handling.
+ */
+unsigned long __init __weak __init_wr_base(void)
+{
+ return 0UL;
+}
+
+void * __weak __wr_addr(void *addr)
+{
+ return (void *)(wr_base + (unsigned long)addr);
+}
+
+void __weak __wr_enable(struct wr_state *state)
+{
+ lockdep_assert_irqs_disabled();
+ state->prev = current->active_mm;
+ switch_mm_irqs_off(NULL, wr_mm, current);
+}
+
+void __weak __wr_disable(struct wr_state *state)
+{
+ lockdep_assert_irqs_disabled();
+ switch_mm_irqs_off(NULL, state->prev, current);
+}
+
+bool __init __weak __wr_map_address(unsigned long addr)
+{
+ spinlock_t *ptl;
+ pte_t pte;
+ pte_t *ptep;
+ unsigned long wr_addr;
+ struct page *page = virt_to_page(addr);
+
+ if (unlikely(!page))
+ return false;
+ wr_addr = (unsigned long)__wr_addr((void *)addr);
+
+ /* The lock is not needed, but avoids open-coding. */
+ ptep = get_locked_pte(wr_mm, wr_addr, &ptl);
+ if (unlikely(!ptep))
+ return false;
+
+ pte = mk_pte(page, PAGE_KERNEL);
+ set_pte_at(wr_mm, wr_addr, ptep, pte);
+ spin_unlock(ptl);
+ return true;
+}
+
+void * __weak __wr_memset(void *p, int c, __kernel_size_t n)
+{
+ return (void *)memset_user((void __user *)p, (u8)c, n);
+}
+
+void * __weak __wr_memcpy(void *p, const void *q, __kernel_size_t n)
+{
+ return (void *)copy_to_user((void __user *)p, q, n);
+}
+
+/*
+ * The following two variables are statically allocated by the linker
+ * script at the boundaries of the memory region (rounded up to
+ * multiples of PAGE_SIZE) reserved for __wr_after_init.
+ */
+extern long __start_wr_after_init;
+extern long __end_wr_after_init;
+static unsigned long start = (unsigned long)&__start_wr_after_init;
+static unsigned long end = (unsigned long)&__end_wr_after_init;
+static inline bool is_wr_after_init(void *p, __kernel_size_t n)
+{
+ unsigned long low = (unsigned long)p;
+ unsigned long high = low + n;
+
+ return likely(start <= low && high <= end);
+}
+
+#define wr_mem_is_writable() (system_state == SYSTEM_BOOTING)
+
+/**
+ * wr_memcpy() - copies n bytes from q to p
+ * @p: beginning of the memory to write to
+ * @q: beginning of the memory to read from
+ * @n: amount of bytes to copy
+ *
+ * Returns pointer to the destination
+ */
+void *wr_memcpy(void *p, const void *q, __kernel_size_t n)
+{
+ struct wr_state state;
+ void *wr_addr;
+
+ if (WARN_ONCE(!is_wr_after_init(p, n), "Invalid WR range."))
+ return p;
+
+ if (unlikely(wr_mem_is_writable()))
+ return memcpy(p, q, n);
+
+ wr_addr = __wr_addr(p);
+ local_irq_disable();
+ __wr_enable(&state);
+ __wr_memcpy(wr_addr, q, n);
+ __wr_disable(&state);
+ local_irq_enable();
+ return p;
+}
+
+/**
+ * wr_memset() - sets n bytes of the destination p to the c value
+ * @p: beginning of the memory to write to
+ * @c: byte to replicate
+ * @n: amount of bytes to copy
+ *
+ * Returns pointer to the destination
+ */
+void *wr_memset(void *p, int c, __kernel_size_t n)
+{
+ struct wr_state state;
+ void *wr_addr;
+
+ if (WARN_ONCE(!is_wr_after_init(p, n), "Invalid WR range."))
+ return p;
+
+ if (unlikely(wr_mem_is_writable()))
+ return memset(p, c, n);
+
+ wr_addr = __wr_addr(p);
+ local_irq_disable();
+ __wr_enable(&state);
+ __wr_memset(wr_addr, c, n);
+ __wr_disable(&state);
+ local_irq_enable();
+ return p;
+}
+
+struct mm_struct *copy_init_mm(void);
+void __init wr_init(void)
+{
+ unsigned long addr;
+
+ wr_mm = copy_init_mm();
+ BUG_ON(!wr_mm);
+
+ wr_base = __init_wr_base();
+
+ /* Create alternate mapping for the entire wr_after_init range. */
+ for (addr = start; addr < end; addr += PAGE_SIZE)
+ BUG_ON(!__wr_map_address(addr));
+}
The patch provides: - the core functionality for write-rare after init for statically allocated data, based on code from Matthew Wilcox - the default implementation for generic architecture A specific architecture can override one or more of the default functions. The core (API) functions are: - wr_memset(): write rare counterpart of memset() - wr_memcpy(): write rare counterpart of memcpy() - wr_assign(): write rare counterpart of the assignment ('=') operator - wr_rcu_assign_pointer(): write rare counterpart of rcu_assign_pointer() In case either the selected architecture doesn't support write rare after init, or the functionality is disabled, the write rare functions will resolve into their non-write rare counterpart: - memset() - memcpy() - assignment operator - rcu_assign_pointer() For code that can be either link as module or as built-in (ex: device driver init function), it is not possible to tell upfront what will be the case. For this scenario if the functions are called during system init, they will automatically choose, at runtime, to go through the fast path of non-write rare. Should they be invoked later, during module init, they will use the write-rare path. Signed-off-by: Igor Stoppa <igor.stoppa@huawei.com> CC: Andy Lutomirski <luto@amacapital.net> CC: Nadav Amit <nadav.amit@gmail.com> CC: Matthew Wilcox <willy@infradead.org> CC: Peter Zijlstra <peterz@infradead.org> CC: Kees Cook <keescook@chromium.org> CC: Dave Hansen <dave.hansen@linux.intel.com> CC: Mimi Zohar <zohar@linux.vnet.ibm.com> CC: Thiago Jung Bauermann <bauerman@linux.ibm.com> CC: Ahmed Soliman <ahmedsoliman@mena.vt.edu> CC: linux-integrity@vger.kernel.org CC: kernel-hardening@lists.openwall.com CC: linux-mm@kvack.org CC: linux-kernel@vger.kernel.org --- arch/Kconfig | 7 ++ include/linux/prmem.h (new) | 71 +++++++++++++++ mm/Makefile | 1 + mm/prmem.c (new) | 179 ++++++++++++++++++++++++++++++++++++++ 4 files changed, 258 insertions(+)