diff mbox series

[1/2] ARM: dts: pfla02: prepare storage devices to add paritions

Message ID 20190204152956.13471-1-m.felsch@pengutronix.de (mailing list archive)
State New, archived
Headers show
Series [1/2] ARM: dts: pfla02: prepare storage devices to add paritions | expand

Commit Message

Marco Felsch Feb. 4, 2019, 3:29 p.m. UTC
Partitions in the NOR and EEPROM are application specific. Prepare the
SoM device tree so platform device tree's can add partitions.

Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
---
 arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Uwe Kleine-König Feb. 12, 2019, 7:12 a.m. UTC | #1
Hello,

On Mon, Feb 04, 2019 at 04:29:55PM +0100, Marco Felsch wrote:
> Partitions in the NOR and EEPROM are application specific. Prepare the
> SoM device tree so platform device tree's can add partitions.

Even though there is no in-tree user (and maybe there will never be) I
would like to see this kind of patch applied.

Our usecase is that the paritioning is defined in the bootloader (here:
barebox) and before jumping into Linux the (maybe) provided dts is fixed
up to contain the right partitioning. So the Linux device tree doesn't
usually include the partitioning, but as barebox contains a copy of the
the device tree files from Linux it helps here to simplify the board
specific device tree. So:

Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Shawn Guo Feb. 28, 2019, 2:26 a.m. UTC | #2
On Mon, Feb 04, 2019 at 04:29:55PM +0100, Marco Felsch wrote:
> Partitions in the NOR and EEPROM are application specific. Prepare the
> SoM device tree so platform device tree's can add partitions.
> 
> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>

Applied, thanks.
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index 1bfa41e01a0c..35d56e25c4a0 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -79,7 +79,7 @@ 
 	status = "okay";
 	cs-gpios = <&gpio4 24 0>;
 
-	flash@0 {
+	som_flash: flash@0 {
 		compatible = "m25p80", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
@@ -107,7 +107,7 @@ 
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	eeprom@50 {
+	som_eeprom: eeprom@50 {
 		compatible = "atmel,24c32";
 		reg = <0x50>;
 	};