[V6,1/4] dt-bindings: fsl: scu: add thermal binding

Commit Message

Anson Huang Feb. 7, 2019, 9:52 a.m. UTC

NXP i.MX8QXP is an ARMv8 SoC with a Cortex-M4 core inside as
system controller, the system controller is in charge of system
power, clock and thermal sensors etc. management, Linux kernel
has to communicate with system controller via MU (message unit)
IPC to get temperature from thermal sensors, this patch adds
binding doc for i.MX system controller thermal driver.

Signed-off-by: Anson Huang <[e-mail]>
Reviewed-by: Rob Herring <[e-mail]>
---
ChangeLog since V5:
	- add "imx,sensor-resource-id" in each thermal zone to pass resource ID for thermal driver.
---
 .../devicetree/bindings/arm/freescale/fsl,scu.txt    | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

Comments

Anson Huang Feb. 13, 2019, 5:35 a.m. UTC | #1

Gental ping...

Best Regards!
Anson Huang

> -----Original Message-----
> From: Anson Huang
> Sent: 2019年2月7日 17:53
> To: [e-mail]; [e-mail]; [e-mail];
> [e-mail]; [e-mail]; [e-mail];
> [e-mail]; [e-mail]; [e-mail];
> [e-mail]; [e-mail]; Aisheng Dong
> <[e-mail]>; [e-mail]; Daniel Baluta
> <[e-mail]>; [e-mail]; Andy Gross
> <[e-mail]>; [e-mail]; [e-mail];
> [e-mail]; [e-mail];
> [e-mail]; [e-mail];
> [e-mail]; [e-mail]; [e-mail];
> [e-mail]; [e-mail]; linux-
> [e-mail]
> Cc: dl-linux-imx <[e-mail]>
> Subject: [PATCH V6 1/4] dt-bindings: fsl: scu: add thermal binding
> 
> NXP i.MX8QXP is an ARMv8 SoC with a Cortex-M4 core inside as system
> controller, the system controller is in charge of system power, clock and
> thermal sensors etc. management, Linux kernel has to communicate with
> system controller via MU (message unit) IPC to get temperature from thermal
> sensors, this patch adds binding doc for i.MX system controller thermal
> driver.
> 
> Signed-off-by: Anson Huang <[e-mail]>
> Reviewed-by: Rob Herring <[e-mail]>
> ---
> ChangeLog since V5:
> 	- add "imx,sensor-resource-id" in each thermal zone to pass resource
> ID for thermal driver.
> ---
>  .../devicetree/bindings/arm/freescale/fsl,scu.txt    | 20
> ++++++++++++++++++++
>  1 file changed, 20 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> index 72d481c..4b79751 100644
> --- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> @@ -122,6 +122,20 @@ RTC bindings based on SCU Message Protocol
> Required properties:
>  - compatible: should be "fsl,imx8qxp-sc-rtc";
> 
> +Thermal bindings based on SCU Message Protocol
> +------------------------------------------------------------
> +
> +Required properties:
> +- compatible : Must be "fsl,imx8qxp-sc-thermal";
> +- tsens-num : Total number of thermal sensors supported;
> +- #thermal-sensor-cells : Should be 1. See
> +
> Documentation/devicetree/bindings/thermal/thermal.txt
> +			  for a description.
> +- imx,sensor-resource-id : This property should be defined in each thermal
> zone
> +			   of thermal-zones node, it passes each thermal
> zone's
> +			   resource id for thermal driver to get temperature
> via
> +			   SCU IPC.
> +
>  Example (imx8qxp):
>  -------------
>  lsio_mu1: mailbox@5d1c0000 {
> @@ -168,6 +182,12 @@ firmware {
>  		rtc: rtc {
>  			compatible = "fsl,imx8qxp-sc-rtc";
>  		};
> +
> +		tsens: thermal-sensor {
> +			compatible = "fsl,imx8qxp-sc-thermal";
> +			tsens-num = <1>;
> +			#thermal-sensor-cells = <1>;
> +		};
>  	};
>  };
> 
> --
> 2.7.4

Anson Huang Feb. 19, 2019, 7:20 a.m. UTC | #2

Ping...

Best Regards!
Anson Huang

> -----Original Message-----
> From: Anson Huang
> Sent: 2019年2月13日 13:36
> To: [e-mail]; [e-mail]; [e-mail];
> [e-mail]; [e-mail]; [e-mail];
> [e-mail]; [e-mail]; [e-mail];
> [e-mail]; [e-mail]; Aisheng Dong
> <[e-mail]>; [e-mail]; Daniel Baluta
> <[e-mail]>; [e-mail]; Andy Gross
> <[e-mail]>; [e-mail]; [e-mail];
> [e-mail]; [e-mail];
> [e-mail]; [e-mail];
> [e-mail]; [e-mail]; [e-mail];
> [e-mail]; [e-mail]; linux-
> [e-mail]
> Cc: dl-linux-imx <[e-mail]>
> Subject: RE: [PATCH V6 1/4] dt-bindings: fsl: scu: add thermal binding
> 
> Gental ping...
> 
> Best Regards!
> Anson Huang
> 
> > -----Original Message-----
> > From: Anson Huang
> > Sent: 2019年2月7日 17:53
> > To: [e-mail]; [e-mail]; [e-mail];
> > [e-mail]; [e-mail]; [e-mail];
> > [e-mail]; [e-mail]; [e-mail];
> > [e-mail]; [e-mail]; Aisheng Dong
> > <[e-mail]>; [e-mail]; Daniel Baluta
> > <[e-mail]>; [e-mail]; Andy Gross
> > <[e-mail]>; [e-mail]; [e-mail];
> > [e-mail]; [e-mail];
> > [e-mail]; [e-mail];
> > [e-mail]; [e-mail]; [e-mail];
> > [e-mail]; [e-mail];
> > linux- [e-mail]
> > Cc: dl-linux-imx <[e-mail]>
> > Subject: [PATCH V6 1/4] dt-bindings: fsl: scu: add thermal binding
> >
> > NXP i.MX8QXP is an ARMv8 SoC with a Cortex-M4 core inside as system
> > controller, the system controller is in charge of system power, clock
> > and thermal sensors etc. management, Linux kernel has to communicate
> > with system controller via MU (message unit) IPC to get temperature
> > from thermal sensors, this patch adds binding doc for i.MX system
> > controller thermal driver.
> >
> > Signed-off-by: Anson Huang <[e-mail]>
> > Reviewed-by: Rob Herring <[e-mail]>
> > ---
> > ChangeLog since V5:
> > 	- add "imx,sensor-resource-id" in each thermal zone to pass resource
> > ID for thermal driver.
> > ---
> >  .../devicetree/bindings/arm/freescale/fsl,scu.txt    | 20
> > ++++++++++++++++++++
> >  1 file changed, 20 insertions(+)
> >
> > diff --git
> > a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> > b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> > index 72d481c..4b79751 100644
> > --- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> > +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> > @@ -122,6 +122,20 @@ RTC bindings based on SCU Message Protocol
> > Required properties:
> >  - compatible: should be "fsl,imx8qxp-sc-rtc";
> >
> > +Thermal bindings based on SCU Message Protocol
> > +------------------------------------------------------------
> > +
> > +Required properties:
> > +- compatible : Must be "fsl,imx8qxp-sc-thermal";
> > +- tsens-num : Total number of thermal sensors supported;
> > +- #thermal-sensor-cells : Should be 1. See
> > +
> > Documentation/devicetree/bindings/thermal/thermal.txt
> > +			  for a description.
> > +- imx,sensor-resource-id : This property should be defined in each
> > +thermal
> > zone
> > +			   of thermal-zones node, it passes each thermal
> > zone's
> > +			   resource id for thermal driver to get temperature
> > via
> > +			   SCU IPC.
> > +
> >  Example (imx8qxp):
> >  -------------
> >  lsio_mu1: mailbox@5d1c0000 {
> > @@ -168,6 +182,12 @@ firmware {
> >  		rtc: rtc {
> >  			compatible = "fsl,imx8qxp-sc-rtc";
> >  		};
> > +
> > +		tsens: thermal-sensor {
> > +			compatible = "fsl,imx8qxp-sc-thermal";
> > +			tsens-num = <1>;
> > +			#thermal-sensor-cells = <1>;
> > +		};
> >  	};
> >  };
> >
> > --
> > 2.7.4

Eduardo Valentin Feb. 20, 2019, 1:04 a.m. UTC | #3

On Tue, Feb 19, 2019 at 07:20:58AM +0000, Anson Huang wrote:
> Ping...

I will take a look on this.

> 
> Best Regards!
> Anson Huang
> 
> > -----Original Message-----
> > From: Anson Huang
> > Sent: 2019年2月13日 13:36
> > To: [e-mail]; [e-mail]; [e-mail];
> > [e-mail]; [e-mail]; [e-mail];
> > [e-mail]; [e-mail]; [e-mail];
> > [e-mail]; [e-mail]; Aisheng Dong
> > <[e-mail]>; [e-mail]; Daniel Baluta
> > <[e-mail]>; [e-mail]; Andy Gross
> > <[e-mail]>; [e-mail]; [e-mail];
> > [e-mail]; [e-mail];
> > [e-mail]; [e-mail];
> > [e-mail]; [e-mail]; [e-mail];
> > [e-mail]; [e-mail]; linux-
> > [e-mail]
> > Cc: dl-linux-imx <[e-mail]>
> > Subject: RE: [PATCH V6 1/4] dt-bindings: fsl: scu: add thermal binding
> > 
> > Gental ping...
> > 
> > Best Regards!
> > Anson Huang
> > 
> > > -----Original Message-----
> > > From: Anson Huang
> > > Sent: 2019年2月7日 17:53
> > > To: [e-mail]; [e-mail]; [e-mail];
> > > [e-mail]; [e-mail]; [e-mail];
> > > [e-mail]; [e-mail]; [e-mail];
> > > [e-mail]; [e-mail]; Aisheng Dong
> > > <[e-mail]>; [e-mail]; Daniel Baluta
> > > <[e-mail]>; [e-mail]; Andy Gross
> > > <[e-mail]>; [e-mail]; [e-mail];
> > > [e-mail]; [e-mail];
> > > [e-mail]; [e-mail];
> > > [e-mail]; [e-mail]; [e-mail];
> > > [e-mail]; [e-mail];
> > > linux- [e-mail]
> > > Cc: dl-linux-imx <[e-mail]>
> > > Subject: [PATCH V6 1/4] dt-bindings: fsl: scu: add thermal binding
> > >
> > > NXP i.MX8QXP is an ARMv8 SoC with a Cortex-M4 core inside as system
> > > controller, the system controller is in charge of system power, clock
> > > and thermal sensors etc. management, Linux kernel has to communicate
> > > with system controller via MU (message unit) IPC to get temperature
> > > from thermal sensors, this patch adds binding doc for i.MX system
> > > controller thermal driver.
> > >
> > > Signed-off-by: Anson Huang <[e-mail]>
> > > Reviewed-by: Rob Herring <[e-mail]>
> > > ---
> > > ChangeLog since V5:
> > > 	- add "imx,sensor-resource-id" in each thermal zone to pass resource
> > > ID for thermal driver.
> > > ---
> > >  .../devicetree/bindings/arm/freescale/fsl,scu.txt    | 20
> > > ++++++++++++++++++++
> > >  1 file changed, 20 insertions(+)
> > >
> > > diff --git
> > > a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> > > b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> > > index 72d481c..4b79751 100644
> > > --- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> > > +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> > > @@ -122,6 +122,20 @@ RTC bindings based on SCU Message Protocol
> > > Required properties:
> > >  - compatible: should be "fsl,imx8qxp-sc-rtc";
> > >
> > > +Thermal bindings based on SCU Message Protocol
> > > +------------------------------------------------------------
> > > +
> > > +Required properties:
> > > +- compatible : Must be "fsl,imx8qxp-sc-thermal";
> > > +- tsens-num : Total number of thermal sensors supported;
> > > +- #thermal-sensor-cells : Should be 1. See
> > > +
> > > Documentation/devicetree/bindings/thermal/thermal.txt
> > > +			  for a description.
> > > +- imx,sensor-resource-id : This property should be defined in each
> > > +thermal
> > > zone
> > > +			   of thermal-zones node, it passes each thermal
> > > zone's
> > > +			   resource id for thermal driver to get temperature
> > > via
> > > +			   SCU IPC.
> > > +
> > >  Example (imx8qxp):
> > >  -------------
> > >  lsio_mu1: mailbox@5d1c0000 {
> > > @@ -168,6 +182,12 @@ firmware {
> > >  		rtc: rtc {
> > >  			compatible = "fsl,imx8qxp-sc-rtc";
> > >  		};
> > > +
> > > +		tsens: thermal-sensor {
> > > +			compatible = "fsl,imx8qxp-sc-thermal";
> > > +			tsens-num = <1>;
> > > +			#thermal-sensor-cells = <1>;
> > > +		};
> > >  	};
> > >  };
> > >
> > > --
> > > 2.7.4
>

Dong Aisheng Feb. 20, 2019, 3:26 a.m. UTC | #4

> From: Anson Huang
> Sent: Thursday, February 7, 2019 5:53 PM
[...]
> 
> NXP i.MX8QXP is an ARMv8 SoC with a Cortex-M4 core inside as system
> controller, the system controller is in charge of system power, clock and
> thermal sensors etc. management, Linux kernel has to communicate with
> system controller via MU (message unit) IPC to get temperature from thermal
> sensors, this patch adds binding doc for i.MX system controller thermal driver.
> 
> Signed-off-by: Anson Huang <[e-mail]>
> Reviewed-by: Rob Herring <[e-mail]>
> ---
> ChangeLog since V5:
> 	- add "imx,sensor-resource-id" in each thermal zone to pass resource ID
> for thermal driver.
> ---
>  .../devicetree/bindings/arm/freescale/fsl,scu.txt    | 20
> ++++++++++++++++++++
>  1 file changed, 20 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> index 72d481c..4b79751 100644
> --- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> @@ -122,6 +122,20 @@ RTC bindings based on SCU Message Protocol
> Required properties:
>  - compatible: should be "fsl,imx8qxp-sc-rtc";
> 
> +Thermal bindings based on SCU Message Protocol
> +------------------------------------------------------------
> +
> +Required properties:
> +- compatible : Must be "fsl,imx8qxp-sc-thermal";
> +- tsens-num : Total number of thermal sensors supported;
> +- #thermal-sensor-cells : Should be 1. See
> +			  Documentation/devicetree/bindings/thermal/thermal.txt
> +			  for a description.
> +- imx,sensor-resource-id : This property should be defined in each thermal
> zone
> +			   of thermal-zones node, it passes each thermal zone's
> +			   resource id for thermal driver to get temperature via
> +			   SCU IPC.

This is missing in the example?

BTW, is this SCU function likely platform dependent?
If not, you probably could add a fallback compatible such as "fsl,scu-rtc"

Regards
Dong Aisheng

> +
>  Example (imx8qxp):
>  -------------
>  lsio_mu1: mailbox@5d1c0000 {
> @@ -168,6 +182,12 @@ firmware {
>  		rtc: rtc {
>  			compatible = "fsl,imx8qxp-sc-rtc";
>  		};
> +
> +		tsens: thermal-sensor {
> +			compatible = "fsl,imx8qxp-sc-thermal";
> +			tsens-num = <1>;
> +			#thermal-sensor-cells = <1>;
> +		};
>  	};
>  };
> 
> --
> 2.7.4

Anson Huang Feb. 20, 2019, 3:43 a.m. UTC | #5

Best Regards!
Anson Huang

> -----Original Message-----
> From: Aisheng Dong
> Sent: 2019年2月20日 11:27
> To: Anson Huang <[e-mail]>; [e-mail];
> [e-mail]; [e-mail]; [e-mail];
> [e-mail]; [e-mail]; [e-mail];
> [e-mail]; [e-mail]; [e-mail];
> [e-mail]; [e-mail]; Daniel Baluta
> <[e-mail]>; [e-mail]; Andy Gross
> <[e-mail]>; [e-mail]; [e-mail];
> [e-mail]; [e-mail];
> [e-mail]; [e-mail];
> [e-mail]; [e-mail]; [e-mail];
> [e-mail]; [e-mail]; linux-
> [e-mail]
> Cc: dl-linux-imx <[e-mail]>
> Subject: RE: [PATCH V6 1/4] dt-bindings: fsl: scu: add thermal binding
> 
> > From: Anson Huang
> > Sent: Thursday, February 7, 2019 5:53 PM
> [...]
> >
> > NXP i.MX8QXP is an ARMv8 SoC with a Cortex-M4 core inside as system
> > controller, the system controller is in charge of system power, clock
> > and thermal sensors etc. management, Linux kernel has to communicate
> > with system controller via MU (message unit) IPC to get temperature
> > from thermal sensors, this patch adds binding doc for i.MX system
> controller thermal driver.
> >
> > Signed-off-by: Anson Huang <[e-mail]>
> > Reviewed-by: Rob Herring <[e-mail]>
> > ---
> > ChangeLog since V5:
> > 	- add "imx,sensor-resource-id" in each thermal zone to pass resource
> > ID for thermal driver.
> > ---
> >  .../devicetree/bindings/arm/freescale/fsl,scu.txt    | 20
> > ++++++++++++++++++++
> >  1 file changed, 20 insertions(+)
> >
> > diff --git
> > a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> > b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> > index 72d481c..4b79751 100644
> > --- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> > +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> > @@ -122,6 +122,20 @@ RTC bindings based on SCU Message Protocol
> > Required properties:
> >  - compatible: should be "fsl,imx8qxp-sc-rtc";
> >
> > +Thermal bindings based on SCU Message Protocol
> > +------------------------------------------------------------
> > +
> > +Required properties:
> > +- compatible : Must be "fsl,imx8qxp-sc-thermal";
> > +- tsens-num : Total number of thermal sensors supported;
> > +- #thermal-sensor-cells : Should be 1. See
> > +
> Documentation/devicetree/bindings/thermal/thermal.txt
> > +			  for a description.
> > +- imx,sensor-resource-id : This property should be defined in each
> > +thermal
> > zone
> > +			   of thermal-zones node, it passes each thermal
> zone's
> > +			   resource id for thermal driver to get temperature
> via
> > +			   SCU IPC.
> 
> This is missing in the example?

There are two parts of thermal dts, one is the tsens which are different on each platform.
The other are common thermal-zone definitions, these are covered by thermal binding doc.
The property is added by us for our platforms, if want to put it in example, I need to copy
Hope piece of common thermal-zone node.

> 
> BTW, is this SCU function likely platform dependent?
> If not, you probably could add a fallback compatible such as "fsl,scu-rtc"

For now, the SCU API we used are platform independent, the ONLY parameter depends
on platform is resource ID, we can get it from dtb node.

OK, I think we can use a more generic compatible name like "fsl,imx-sc-thermal".

Anson.
> 
> Regards
> Dong Aisheng
> 
> > +
> >  Example (imx8qxp):
> >  -------------
> >  lsio_mu1: mailbox@5d1c0000 {
> > @@ -168,6 +182,12 @@ firmware {
> >  		rtc: rtc {
> >  			compatible = "fsl,imx8qxp-sc-rtc";
> >  		};
> > +
> > +		tsens: thermal-sensor {
> > +			compatible = "fsl,imx8qxp-sc-thermal";
> > +			tsens-num = <1>;
> > +			#thermal-sensor-cells = <1>;
> > +		};
> >  	};
> >  };
> >
> > --
> > 2.7.4

Patch

diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
index 72d481c..4b79751 100644
--- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
+++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
@@ -122,6 +122,20 @@  RTC bindings based on SCU Message Protocol
 Required properties:
 - compatible: should be "fsl,imx8qxp-sc-rtc";
 
+Thermal bindings based on SCU Message Protocol
+------------------------------------------------------------
+
+Required properties:
+- compatible : Must be "fsl,imx8qxp-sc-thermal";
+- tsens-num : Total number of thermal sensors supported;
+- #thermal-sensor-cells : Should be 1. See
+			  Documentation/devicetree/bindings/thermal/thermal.txt
+			  for a description.
+- imx,sensor-resource-id : This property should be defined in each thermal zone
+			   of thermal-zones node, it passes each thermal zone's
+			   resource id for thermal driver to get temperature via
+			   SCU IPC.
+
 Example (imx8qxp):
 -------------
 lsio_mu1: mailbox@5d1c0000 {
@@ -168,6 +182,12 @@  firmware {
 		rtc: rtc {
 			compatible = "fsl,imx8qxp-sc-rtc";
 		};
+
+		tsens: thermal-sensor {
+			compatible = "fsl,imx8qxp-sc-thermal";
+			tsens-num = <1>;
+			#thermal-sensor-cells = <1>;
+		};
 	};
 };