| Message ID | 20190211225726.38355-1-tony@atomide.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | mfd: twl6040: Fix device init errors for ACCCTL register | expand |
On 12/02/2019 0.57, Tony Lindgren wrote: > I noticed that we can get a -EREMOTEIO errors on at least omap4 duovero: > > twl6040 0-004b: Failed to write 2d = 19: -121 > > And then any following register access will produce errors. > > There 2d offset above is register ACCCTL that gets written on twl6040 > powerup. With error checking added to the related regcache_sync() call, > the -EREMOTEIO error is reproducable on twl6040 powerup at least > duovero. > > To fix the error, we need to wait until twl6040 is accessible after the > powerup. Based on tests on omap4 duovero, we need to wait over 8ms after > powerup before register write will complete without failures. Let's also > make sure we warn about possible errors too. > > Note that we have twl6040_patch[] reg_sequence with the ACCCTL register > configuration and regcache_sync() will write the new value to ACCCTL. Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> > > Cc: Florian Vaussard <florian.vaussard@epfl.ch> > Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> > Signed-off-by: Tony Lindgren <tony@atomide.com> > --- > drivers/mfd/twl6040.c | 13 ++++++++++++- > 1 file changed, 12 insertions(+), 1 deletion(-) > > diff --git a/drivers/mfd/twl6040.c b/drivers/mfd/twl6040.c > --- a/drivers/mfd/twl6040.c > +++ b/drivers/mfd/twl6040.c > @@ -322,8 +322,19 @@ int twl6040_power(struct twl6040 *twl6040, int on) > } > } > > + /* > + * Register access can produce errors after power-up unless we > + * wait at least 8ms based on measurements on duovero. > + */ > + usleep_range(10000, 12000); > + > /* Sync with the HW */ > - regcache_sync(twl6040->regmap); > + ret = regcache_sync(twl6040->regmap); > + if (ret) { > + dev_err(twl6040->dev, "%s register write failed: %i\n", > + __func__, ret); > + goto out; > + } > > /* Default PLL configuration after power up */ > twl6040->pll = TWL6040_SYSCLK_SEL_LPPLL; > - Péter Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
On Mon, 11 Feb 2019, Tony Lindgren wrote: > I noticed that we can get a -EREMOTEIO errors on at least omap4 duovero: > > twl6040 0-004b: Failed to write 2d = 19: -121 > > And then any following register access will produce errors. > > There 2d offset above is register ACCCTL that gets written on twl6040 > powerup. With error checking added to the related regcache_sync() call, > the -EREMOTEIO error is reproducable on twl6040 powerup at least > duovero. > > To fix the error, we need to wait until twl6040 is accessible after the > powerup. Based on tests on omap4 duovero, we need to wait over 8ms after > powerup before register write will complete without failures. Let's also > make sure we warn about possible errors too. > > Note that we have twl6040_patch[] reg_sequence with the ACCCTL register > configuration and regcache_sync() will write the new value to ACCCTL. > > Cc: Florian Vaussard <florian.vaussard@epfl.ch> > Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> > Signed-off-by: Tony Lindgren <tony@atomide.com> > --- > drivers/mfd/twl6040.c | 13 ++++++++++++- > 1 file changed, 12 insertions(+), 1 deletion(-) > > diff --git a/drivers/mfd/twl6040.c b/drivers/mfd/twl6040.c > --- a/drivers/mfd/twl6040.c > +++ b/drivers/mfd/twl6040.c > @@ -322,8 +322,19 @@ int twl6040_power(struct twl6040 *twl6040, int on) > } > } > > + /* > + * Register access can produce errors after power-up unless we > + * wait at least 8ms based on measurements on duovero. > + */ > + usleep_range(10000, 12000); > + > /* Sync with the HW */ > - regcache_sync(twl6040->regmap); > + ret = regcache_sync(twl6040->regmap); > + if (ret) { > + dev_err(twl6040->dev, "%s register write failed: %i\n", > + __func__, ret); Please drop the __func__ and just use the standard format. Wouldn't something a little more forthcoming be better? "Failed to sync with the HW" ? > + goto out; > + } > > /* Default PLL configuration after power up */ > twl6040->pll = TWL6040_SYSCLK_SEL_LPPLL;
* Lee Jones <lee.jones@linaro.org> [190214 09:21]: > On Mon, 11 Feb 2019, Tony Lindgren wrote: > > + ret = regcache_sync(twl6040->regmap); > > + if (ret) { > > + dev_err(twl6040->dev, "%s register write failed: %i\n", > > + __func__, ret); > > Please drop the __func__ and just use the standard format. > > Wouldn't something a little more forthcoming be better? > > "Failed to sync with the HW" ? Sure I'll send an updated patch. Regards, Tony
diff --git a/drivers/mfd/twl6040.c b/drivers/mfd/twl6040.c --- a/drivers/mfd/twl6040.c +++ b/drivers/mfd/twl6040.c @@ -322,8 +322,19 @@ int twl6040_power(struct twl6040 *twl6040, int on) } } + /* + * Register access can produce errors after power-up unless we + * wait at least 8ms based on measurements on duovero. + */ + usleep_range(10000, 12000); + /* Sync with the HW */ - regcache_sync(twl6040->regmap); + ret = regcache_sync(twl6040->regmap); + if (ret) { + dev_err(twl6040->dev, "%s register write failed: %i\n", + __func__, ret); + goto out; + } /* Default PLL configuration after power up */ twl6040->pll = TWL6040_SYSCLK_SEL_LPPLL;
I noticed that we can get a -EREMOTEIO errors on at least omap4 duovero: twl6040 0-004b: Failed to write 2d = 19: -121 And then any following register access will produce errors. There 2d offset above is register ACCCTL that gets written on twl6040 powerup. With error checking added to the related regcache_sync() call, the -EREMOTEIO error is reproducable on twl6040 powerup at least duovero. To fix the error, we need to wait until twl6040 is accessible after the powerup. Based on tests on omap4 duovero, we need to wait over 8ms after powerup before register write will complete without failures. Let's also make sure we warn about possible errors too. Note that we have twl6040_patch[] reg_sequence with the ACCCTL register configuration and regcache_sync() will write the new value to ACCCTL. Cc: Florian Vaussard <florian.vaussard@epfl.ch> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> --- drivers/mfd/twl6040.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-)