diff mbox series

[v10,3/3] dt-bindings: dma: uart: rename binding

Message ID 1547781016-890-4-git-send-email-long.cheng@mediatek.com (mailing list archive)
State New, archived
Headers show
Series add uart DMA function | expand

Commit Message

Long Cheng Jan. 18, 2019, 3:10 a.m. UTC 
The filename matches mtk-uart-apdma.c.
So using "mtk-uart-apdma.txt" should be better.

Signed-off-by: Long Cheng <long.cheng@mediatek.com>
---
 .../devicetree/bindings/dma/8250_mtk_dma.txt       |   33 --------------------
 .../devicetree/bindings/dma/mtk-uart-apdma.txt     |   33 ++++++++++++++++++++
 2 files changed, 33 insertions(+), 33 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/dma/8250_mtk_dma.txt
 create mode 100644 Documentation/devicetree/bindings/dma/mtk-uart-apdma.txt

Comments

Rob Herring (Arm) Jan. 21, 2019, 2:18 p.m. UTC | #1 
On Fri, 18 Jan 2019 11:10:16 +0800, Long Cheng wrote:
> The filename matches mtk-uart-apdma.c.
> So using "mtk-uart-apdma.txt" should be better.
> 
> Signed-off-by: Long Cheng <long.cheng@mediatek.com>
> ---
>  .../devicetree/bindings/dma/8250_mtk_dma.txt       |   33 --------------------
>  .../devicetree/bindings/dma/mtk-uart-apdma.txt     |   33 ++++++++++++++++++++
>  2 files changed, 33 insertions(+), 33 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/dma/8250_mtk_dma.txt
>  create mode 100644 Documentation/devicetree/bindings/dma/mtk-uart-apdma.txt
> 

Reviewed-by: Rob Herring <robh@kernel.org>
Matthias Brugger Feb. 14, 2019, 10:13 a.m. UTC | #2 
On 18/01/2019 04:10, Long Cheng wrote:
> The filename matches mtk-uart-apdma.c.
> So using "mtk-uart-apdma.txt" should be better.
> 
> Signed-off-by: Long Cheng <long.cheng@mediatek.com>
> ---
>  .../devicetree/bindings/dma/8250_mtk_dma.txt       |   33 --------------------
>  .../devicetree/bindings/dma/mtk-uart-apdma.txt     |   33 ++++++++++++++++++++
>  2 files changed, 33 insertions(+), 33 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/dma/8250_mtk_dma.txt
>  create mode 100644 Documentation/devicetree/bindings/dma/mtk-uart-apdma.txt
> 
> diff --git a/Documentation/devicetree/bindings/dma/8250_mtk_dma.txt b/Documentation/devicetree/bindings/dma/8250_mtk_dma.txt
> deleted file mode 100644
> index 3fe0961..0000000
> --- a/Documentation/devicetree/bindings/dma/8250_mtk_dma.txt
> +++ /dev/null
> @@ -1,33 +0,0 @@
> -* Mediatek UART APDMA Controller
> -
> -Required properties:
> -- compatible should contain:
> -  * "mediatek,mt2712-uart-dma" for MT2712 compatible APDMA
> -  * "mediatek,mt6577-uart-dma" for MT6577 and all of the above
> -
> -- reg: The base address of the APDMA register bank.> -
> -- interrupts: A single interrupt specifier.

One interrupt per dma-request, or 8 if no dma-requests property is present.

> -
> -- clocks : Must contain an entry for each entry in clock-names.
> -  See ../clocks/clock-bindings.txt for details.
> -- clock-names: The APDMA clock for register accesses> -
> -Examples:
> -
> -	apdma: dma-controller@11000380 {
> -		compatible = "mediatek,mt2712-uart-dma";
> -		reg = <0 0x11000380 0 0x400>;
> -		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_LOW>,
> -			     <GIC_SPI 64 IRQ_TYPE_LEVEL_LOW>,
> -			     <GIC_SPI 65 IRQ_TYPE_LEVEL_LOW>,
> -			     <GIC_SPI 66 IRQ_TYPE_LEVEL_LOW>,
> -			     <GIC_SPI 67 IRQ_TYPE_LEVEL_LOW>,
> -			     <GIC_SPI 68 IRQ_TYPE_LEVEL_LOW>,
> -			     <GIC_SPI 69 IRQ_TYPE_LEVEL_LOW>,
> -			     <GIC_SPI 70 IRQ_TYPE_LEVEL_LOW>;
> -		clocks = <&pericfg CLK_PERI_AP_DMA>;
> -		clock-names = "apdma";
> -		#dma-cells = <1>;
> -	};
> -
> diff --git a/Documentation/devicetree/bindings/dma/mtk-uart-apdma.txt b/Documentation/devicetree/bindings/dma/mtk-uart-apdma.txt
> new file mode 100644
> index 0000000..3fe0961
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/dma/mtk-uart-apdma.txt
> @@ -0,0 +1,33 @@
> +* Mediatek UART APDMA Controller
> +
> +Required properties:
> +- compatible should contain:
> +  * "mediatek,mt2712-uart-dma" for MT2712 compatible APDMA
> +  * "mediatek,mt6577-uart-dma" for MT6577 and all of the above
> +
> +- reg: The base address of the APDMA register bank.
> +

There is one address needed for every dma-request or 8 if dma-requests property
is not present. As already mentioned in the driver review dma-requests property
is missing.

> +- interrupts: A single interrupt specifier.
> +
> +- clocks : Must contain an entry for each entry in clock-names.
> +  See ../clocks/clock-bindings.txt for details.
> +- clock-names: The APDMA clock for register accesses
> +

Missing option property dma-33bits (should be mtk,dma-33bits?).

> +Examples:
> +
> +	apdma: dma-controller@11000380 {
> +		compatible = "mediatek,mt2712-uart-dma";
> +		reg = <0 0x11000380 0 0x400>;

We are missing the io mem areas here, right?

Regards,
Matthias

> +		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_LOW>,
> +			     <GIC_SPI 64 IRQ_TYPE_LEVEL_LOW>,
> +			     <GIC_SPI 65 IRQ_TYPE_LEVEL_LOW>,
> +			     <GIC_SPI 66 IRQ_TYPE_LEVEL_LOW>,
> +			     <GIC_SPI 67 IRQ_TYPE_LEVEL_LOW>,
> +			     <GIC_SPI 68 IRQ_TYPE_LEVEL_LOW>,
> +			     <GIC_SPI 69 IRQ_TYPE_LEVEL_LOW>,
> +			     <GIC_SPI 70 IRQ_TYPE_LEVEL_LOW>;
> +		clocks = <&pericfg CLK_PERI_AP_DMA>;
> +		clock-names = "apdma";
> +		#dma-cells = <1>;
> +	};
> +
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/dma/8250_mtk_dma.txt b/Documentation/devicetree/bindings/dma/8250_mtk_dma.txt
deleted file mode 100644
index 3fe0961..0000000
--- a/Documentation/devicetree/bindings/dma/8250_mtk_dma.txt
+++ /dev/null
@@ -1,33 +0,0 @@ 
-* Mediatek UART APDMA Controller
-
-Required properties:
-- compatible should contain:
-  * "mediatek,mt2712-uart-dma" for MT2712 compatible APDMA
-  * "mediatek,mt6577-uart-dma" for MT6577 and all of the above
-
-- reg: The base address of the APDMA register bank.
-
-- interrupts: A single interrupt specifier.
-
-- clocks : Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names: The APDMA clock for register accesses
-
-Examples:
-
-	apdma: dma-controller@11000380 {
-		compatible = "mediatek,mt2712-uart-dma";
-		reg = <0 0x11000380 0 0x400>;
-		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 64 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 65 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 66 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 67 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 68 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 69 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 70 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&pericfg CLK_PERI_AP_DMA>;
-		clock-names = "apdma";
-		#dma-cells = <1>;
-	};
-
diff --git a/Documentation/devicetree/bindings/dma/mtk-uart-apdma.txt b/Documentation/devicetree/bindings/dma/mtk-uart-apdma.txt
new file mode 100644
index 0000000..3fe0961
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/mtk-uart-apdma.txt
@@ -0,0 +1,33 @@ 
+* Mediatek UART APDMA Controller
+
+Required properties:
+- compatible should contain:
+  * "mediatek,mt2712-uart-dma" for MT2712 compatible APDMA
+  * "mediatek,mt6577-uart-dma" for MT6577 and all of the above
+
+- reg: The base address of the APDMA register bank.
+
+- interrupts: A single interrupt specifier.
+
+- clocks : Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
+- clock-names: The APDMA clock for register accesses
+
+Examples:
+
+	apdma: dma-controller@11000380 {
+		compatible = "mediatek,mt2712-uart-dma";
+		reg = <0 0x11000380 0 0x400>;
+		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 64 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 65 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 66 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 67 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 68 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 69 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 70 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_AP_DMA>;
+		clock-names = "apdma";
+		#dma-cells = <1>;
+	};
+