| Message ID | 1550126763-22669-8-git-send-email-christophe.roullier@st.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | stmmac: add some fixes for stm32 | expand |
On Thu, Feb 14, 2019 at 07:46:02AM +0100, Christophe Roullier wrote: > + mdio0 { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "snps,dwmac-mdio"; > + phy1: ethernet-phy@1 { > + reg = <0>; > + }; The reg value should be the same as ethernet-phy@X. Andrew > + mdio0 { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "snps,dwmac-mdio"; > + phy1: ethernet-phy@1 { > + reg = <0>; > + }; Here as well. Andrew
On 2/14/19 2:44 PM, Andrew Lunn wrote: > On Thu, Feb 14, 2019 at 07:46:02AM +0100, Christophe Roullier wrote: >> + mdio0 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + compatible = "snps,dwmac-mdio"; >> + phy1: ethernet-phy@1 { >> + reg = <0>; >> + }; > > The reg value should be the same as ethernet-phy@X. > > Andrew >> + mdio0 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + compatible = "snps,dwmac-mdio"; >> + phy1: ethernet-phy@1 { >> + reg = <0>; >> + }; > > Here as well. > > Andrew > Hi Andrew, Ok I will update. Thanks. Christophe
diff --git a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi index 24be8e6..980b276 100644 --- a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi @@ -173,6 +173,21 @@ }; }; + ethernet_rmii: rmii@0 { + pins { + pinmux = <STM32_PINMUX('G', 11, AF11)>, + <STM32_PINMUX('G', 13, AF11)>, + <STM32_PINMUX('G', 12, AF11)>, + <STM32_PINMUX('C', 4, AF11)>, + <STM32_PINMUX('C', 5, AF11)>, + <STM32_PINMUX('A', 7, AF11)>, + <STM32_PINMUX('C', 1, AF11)>, + <STM32_PINMUX('A', 2, AF11)>, + <STM32_PINMUX('A', 1, AF11)>; + slew-rate = <2>; + }; + }; + usart1_pins: usart1@0 { pins1 { pinmux = <STM32_PINMUX('B', 14, AF4)>; /* USART1_TX */ diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi index cbdd69c..f6384af 100644 --- a/arch/arm/boot/dts/stm32h743.dtsi +++ b/arch/arm/boot/dts/stm32h743.dtsi @@ -511,6 +511,25 @@ status = "disabled"; }; }; + + syscfg: system-config@58000400 { + compatible = "syscon"; + reg = <0x58000400 0x400>; + }; + + mac: ethernet@40028000 { + compatible = "st,stm32-dwmac", "snps,dwmac-4.10a"; + reg = <0x40028000 0x8000>; + reg-names = "stmmaceth"; + interrupts = <61>; + interrupt-names = "macirq"; + clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx", + "syscfg-clk"; + clocks = <&rcc ETH1MAC_CK>, <&rcc ETH1TX_CK>, <&rcc ETH1RX_CK>, <&rcc SYSCFG_CK>; + st,syscon = <&syscfg 0x4>; + snps,pbl = <8>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/stm32h743i-disco.dts b/arch/arm/boot/dts/stm32h743i-disco.dts index 45e088c..0f738d0 100644 --- a/arch/arm/boot/dts/stm32h743i-disco.dts +++ b/arch/arm/boot/dts/stm32h743i-disco.dts @@ -66,6 +66,23 @@ clock-frequency = <25000000>; }; +&mac { + status = "okay"; + pinctrl-0 = <ðernet_rmii>; + pinctrl-names = "default"; + phy-mode = "rmii"; + phy-handle = <&phy1>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy1: ethernet-phy@1 { + reg = <0>; + }; + }; +}; + &usart2 { pinctrl-0 = <&usart2_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/stm32h743i-eval.dts b/arch/arm/boot/dts/stm32h743i-eval.dts index 3f8e0c4..44997ba 100644 --- a/arch/arm/boot/dts/stm32h743i-eval.dts +++ b/arch/arm/boot/dts/stm32h743i-eval.dts @@ -104,6 +104,23 @@ status = "okay"; }; +&mac { + status = "okay"; + pinctrl-0 = <ðernet_rmii>; + pinctrl-names = "default"; + phy-mode = "rmii"; + phy-handle = <&phy1>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy1: ethernet-phy@1 { + reg = <0>; + }; + }; +}; + &usart1 { pinctrl-0 = <&usart1_pins>; pinctrl-names = "default";
Synopsys GMAC 4.10 is used. And Phy mode for eval and disco is RMII with PHY SMSC LAN8742 Signed-off-by: Christophe Roullier <christophe.roullier@st.com> --- arch/arm/boot/dts/stm32h743-pinctrl.dtsi | 15 +++++++++++++++ arch/arm/boot/dts/stm32h743.dtsi | 19 +++++++++++++++++++ arch/arm/boot/dts/stm32h743i-disco.dts | 17 +++++++++++++++++ arch/arm/boot/dts/stm32h743i-eval.dts | 17 +++++++++++++++++ 4 files changed, 68 insertions(+)