@@ -909,6 +909,12 @@ controller implements weight and absolute bandwidth limit models for
normal scheduling policy and absolute bandwidth allocation model for
realtime scheduling policy.
+Cycles distribution is based, by default, on a temporal base and it
+does not account for the frequency at which tasks are executed.
+The (optional) utilization clamping support allows to enforce a minimum
+bandwidth, which should always be provided by a CPU, and a maximum bandwidth,
+which should never be exceeded by a CPU.
+
WARNING: cgroup2 doesn't yet support control of realtime processes and
the cpu controller can only be enabled when all RT processes are in
the root cgroup. Be aware that system management software may already
@@ -974,6 +980,27 @@ All time durations are in microseconds.
Shows pressure stall information for CPU. See
Documentation/accounting/psi.txt for details.
+ cpu.util.min
+ A read-write single value file which exists on non-root cgroups.
+ The default is "0", i.e. no utilization boosting.
+
+ The requested minimum utilization in the range [0, 1024].
+
+ This interface allows reading and setting minimum utilization clamp
+ values similar to the sched_setattr(2). This minimum utilization
+ value is used to clamp the task specific minimum utilization clamp.
+
+ cpu.util.max
+ A read-write single value file which exists on non-root cgroups.
+ The default is "1024". i.e. no utilization capping
+
+ The requested maximum utilization in the range [0, 1024].
+
+ This interface allows reading and setting maximum utilization clamp
+ values similar to the sched_setattr(2). This maximum utilization
+ value is used to clamp the task specific maximum utilization clamp.
+
+
Memory
------
@@ -612,8 +612,11 @@ struct uclamp_se {
/*
* Clamp value "obtained" by a scheduling entity.
*
- * This cache the actual clamp value, possibly enforced by system
- * default clamps, a task is subject to while enqueued in a rq.
+ * For a task, this is the value (possibly) enforced by the
+ * task group the task is currently part of or by the system
+ * default clamp values, whichever is the most restrictive.
+ * For task groups, this is the value (possibly) enforced by a
+ * parent task group.
*/
struct {
unsigned int value : bits_per(SCHED_CAPACITY_SCALE);
@@ -866,6 +866,28 @@ config RT_GROUP_SCHED
endif #CGROUP_SCHED
+config UCLAMP_TASK_GROUP
+ bool "Utilization clamping per group of tasks"
+ depends on CGROUP_SCHED
+ depends on UCLAMP_TASK
+ default n
+ help
+ This feature enables the scheduler to track the clamped utilization
+ of each CPU based on RUNNABLE tasks currently scheduled on that CPU.
+
+ When this option is enabled, the user can specify a min and max
+ CPU bandwidth which is allowed for each single task in a group.
+ The max bandwidth allows to clamp the maximum frequency a task
+ can use, while the min bandwidth allows to define a minimum
+ frequency a task will always use.
+
+ When task group based utilization clamping is enabled, an eventually
+ specified task-specific clamp value is constrained by the cgroup
+ specified clamp value. Both minimum and maximum task clamping cannot
+ be bigger than the corresponding clamping defined at task group level.
+
+ If in doubt, say N.
+
config CGROUP_PIDS
bool "PIDs controller"
help
@@ -1148,6 +1148,14 @@ static void __init init_uclamp(void)
uc_se = &uclamp_default[clamp_id];
uc_se->bucket_id = bucket_id;
uc_se->value = value;
+
+#ifdef CONFIG_UCLAMP_TASK_GROUP
+ uc_se = &root_task_group.uclamp[clamp_id];
+ uc_se->bucket_id = bucket_id;
+ uc_se->value = value;
+ uc_se->effective.bucket_id = bucket_id;
+ uc_se->effective.value = value;
+#endif
}
}
@@ -6739,6 +6747,23 @@ void ia64_set_curr_task(int cpu, struct task_struct *p)
/* task_group_lock serializes the addition/removal of task groups */
static DEFINE_SPINLOCK(task_group_lock);
+static inline int alloc_uclamp_sched_group(struct task_group *tg,
+ struct task_group *parent)
+{
+#ifdef CONFIG_UCLAMP_TASK_GROUP
+ int clamp_id;
+
+ for (clamp_id = 0; clamp_id < UCLAMP_CNT; ++clamp_id) {
+ tg->uclamp[clamp_id].value =
+ parent->uclamp[clamp_id].value;
+ tg->uclamp[clamp_id].bucket_id =
+ parent->uclamp[clamp_id].bucket_id;
+ }
+#endif
+
+ return 1;
+}
+
static void sched_free_group(struct task_group *tg)
{
free_fair_sched_group(tg);
@@ -6762,6 +6787,9 @@ struct task_group *sched_create_group(struct task_group *parent)
if (!alloc_rt_sched_group(tg, parent))
goto err;
+ if (!alloc_uclamp_sched_group(tg, parent))
+ goto err;
+
return tg;
err:
@@ -6982,6 +7010,100 @@ static void cpu_cgroup_attach(struct cgroup_taskset *tset)
sched_move_task(task);
}
+#ifdef CONFIG_UCLAMP_TASK_GROUP
+static int cpu_util_min_write_u64(struct cgroup_subsys_state *css,
+ struct cftype *cftype, u64 min_value)
+{
+ struct task_group *tg;
+ int ret = 0;
+
+ if (min_value > SCHED_CAPACITY_SCALE)
+ return -ERANGE;
+
+ rcu_read_lock();
+
+ tg = css_tg(css);
+ if (tg == &root_task_group) {
+ ret = -EINVAL;
+ goto out;
+ }
+ if (tg->uclamp[UCLAMP_MIN].value == min_value)
+ goto out;
+ if (tg->uclamp[UCLAMP_MAX].value < min_value) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ /* Update tg's "requested" clamp value */
+ tg->uclamp[UCLAMP_MIN].value = min_value;
+ tg->uclamp[UCLAMP_MIN].bucket_id = uclamp_bucket_id(min_value);
+
+out:
+ rcu_read_unlock();
+
+ return ret;
+}
+
+static int cpu_util_max_write_u64(struct cgroup_subsys_state *css,
+ struct cftype *cftype, u64 max_value)
+{
+ struct task_group *tg;
+ int ret = 0;
+
+ if (max_value > SCHED_CAPACITY_SCALE)
+ return -ERANGE;
+
+ rcu_read_lock();
+
+ tg = css_tg(css);
+ if (tg == &root_task_group) {
+ ret = -EINVAL;
+ goto out;
+ }
+ if (tg->uclamp[UCLAMP_MAX].value == max_value)
+ goto out;
+ if (tg->uclamp[UCLAMP_MIN].value > max_value) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ /* Update tg's "requested" clamp value */
+ tg->uclamp[UCLAMP_MAX].value = max_value;
+ tg->uclamp[UCLAMP_MAX].bucket_id = uclamp_bucket_id(max_value);
+
+out:
+ rcu_read_unlock();
+
+ return ret;
+}
+
+static inline u64 cpu_uclamp_read(struct cgroup_subsys_state *css,
+ enum uclamp_id clamp_id)
+{
+ struct task_group *tg;
+ u64 util_clamp;
+
+ rcu_read_lock();
+ tg = css_tg(css);
+ util_clamp = tg->uclamp[clamp_id].value;
+ rcu_read_unlock();
+
+ return util_clamp;
+}
+
+static u64 cpu_util_min_read_u64(struct cgroup_subsys_state *css,
+ struct cftype *cft)
+{
+ return cpu_uclamp_read(css, UCLAMP_MIN);
+}
+
+static u64 cpu_util_max_read_u64(struct cgroup_subsys_state *css,
+ struct cftype *cft)
+{
+ return cpu_uclamp_read(css, UCLAMP_MAX);
+}
+#endif /* CONFIG_UCLAMP_TASK_GROUP */
+
#ifdef CONFIG_FAIR_GROUP_SCHED
static int cpu_shares_write_u64(struct cgroup_subsys_state *css,
struct cftype *cftype, u64 shareval)
@@ -7319,6 +7441,18 @@ static struct cftype cpu_legacy_files[] = {
.read_u64 = cpu_rt_period_read_uint,
.write_u64 = cpu_rt_period_write_uint,
},
+#endif
+#ifdef CONFIG_UCLAMP_TASK_GROUP
+ {
+ .name = "util.min",
+ .read_u64 = cpu_util_min_read_u64,
+ .write_u64 = cpu_util_min_write_u64,
+ },
+ {
+ .name = "util.max",
+ .read_u64 = cpu_util_max_read_u64,
+ .write_u64 = cpu_util_max_write_u64,
+ },
#endif
{ } /* Terminate */
};
@@ -7486,6 +7620,20 @@ static struct cftype cpu_files[] = {
.seq_show = cpu_max_show,
.write = cpu_max_write,
},
+#endif
+#ifdef CONFIG_UCLAMP_TASK_GROUP
+ {
+ .name = "util.min",
+ .flags = CFTYPE_NOT_ON_ROOT,
+ .read_u64 = cpu_util_min_read_u64,
+ .write_u64 = cpu_util_min_write_u64,
+ },
+ {
+ .name = "util.max",
+ .flags = CFTYPE_NOT_ON_ROOT,
+ .read_u64 = cpu_util_max_read_u64,
+ .write_u64 = cpu_util_max_write_u64,
+ },
#endif
{ } /* terminate */
};
@@ -399,6 +399,11 @@ struct task_group {
#endif
struct cfs_bandwidth cfs_bandwidth;
+
+#ifdef CONFIG_UCLAMP_TASK_GROUP
+ struct uclamp_se uclamp[UCLAMP_CNT];
+#endif
+
};
#ifdef CONFIG_FAIR_GROUP_SCHED
The cgroup CPU bandwidth controller allows to assign a specified (maximum) bandwidth to the tasks of a group. However this bandwidth is defined and enforced only on a temporal base, without considering the actual frequency a CPU is running on. Thus, the amount of computation completed by a task within an allocated bandwidth can be very different depending on the actual frequency the CPU is running that task. The amount of computation can be affected also by the specific CPU a task is running on, especially when running on asymmetric capacity systems like Arm's big.LITTLE. With the availability of schedutil, the scheduler is now able to drive frequency selections based on actual task utilization. Moreover, the utilization clamping support provides a mechanism to bias the frequency selection operated by schedutil depending on constraints assigned to the tasks currently RUNNABLE on a CPU. Giving the mechanisms described above, it is now possible to extend the cpu controller to specify the minimum (or maximum) utilization which should be considered for tasks RUNNABLE on a cpu. This makes it possible to better defined the actual computational power assigned to task groups, thus improving the cgroup CPU bandwidth controller which is currently based just on time constraints. Extend the CPU controller with a couple of new attributes util.{min,max} which allows to enforce utilization boosting and capping for all the tasks in a group. Specifically: - util.min: defines the minimum utilization which should be considered i.e. the RUNNABLE tasks of this group will run at least at a minimum frequency which corresponds to the min_util utilization - util.max: defines the maximum utilization which should be considered i.e. the RUNNABLE tasks of this group will run up to a maximum frequency which corresponds to the max_util utilization These attributes: a) are available only for non-root nodes, both on default and legacy hierarchies, while system wide clamps are defined by a generic interface which does not depends on cgroups b) do not enforce any constraints and/or dependencies between the parent and its child nodes, thus relying: - on permission settings defined by the system management software, to define if subgroups can configure their clamp values - on the delegation model, to ensure that effective clamps are updated to consider both subgroup requests and parent group constraints c) have higher priority than task-specific clamps, defined via sched_setattr(), thus allowing to control and restrict task requests This patch provides the basic support to expose the two new attributes and to validate their run-time updates, while we do not (yet) actually allocated clamp buckets. Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tejun Heo <tj@kernel.org> --- Documentation/admin-guide/cgroup-v2.rst | 27 +++++ include/linux/sched.h | 7 +- init/Kconfig | 22 ++++ kernel/sched/core.c | 148 ++++++++++++++++++++++++ kernel/sched/sched.h | 5 + 5 files changed, 207 insertions(+), 2 deletions(-)